! Started logfile: J1324-3235_S_2002_01_31_yyk_uvs.log on Tue Jun 26 22:49:45 2007 obs J1324-3235_S_2002_01_31_yyk_uva.fits ! Reading UV FITS file: J1324-3235_S_2002_01_31_yyk_uva.fits ! AN table 1: 72 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.774074 visibilities/baseline/integration-bin. ! Found source: J1324-3235 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22947e+09 8e+06 1 8e+06 ! 02 2 2.25947e+09 8e+06 1 8e+06 ! 03 3 2.34947e+09 8e+06 1 8e+06 ! 04 4 2.36947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1224 lines of history. ! ! Reading 10032 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1324-3235_S_2002_01_31_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.26926 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.411 mas, bmaj=5.953 mas, bpa=2.744 degrees ! Estimated noise=1884.08 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.143582 Jy ! Component: 100 - total flux cleaned = 0.181621 Jy ! Total flux subtracted in 100 components = 0.181621 Jy ! Clean residual min=-0.012016 max=0.018170 Jy/beam ! Clean residual mean=-0.000016 rms=0.003436 Jy/beam ! Combined flux in latest and established models = 0.181621 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.181621 Jy ! ! Correcting IF 1. ! A total of 101 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 155 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 83 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 83 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.196909Jy sigma=0.001282 ! Fit after self-cal, rms=0.196791Jy sigma=0.001282 ! Inverting map and beam ! Estimated beam: bmin=2.411 mas, bmaj=5.953 mas, bpa=2.744 degrees ! Estimated noise=1884.08 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.229 mas, bmaj=8.028 mas, bpa=-1.1 degrees ! Estimated noise=1053.57 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4, -9). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0307836 Jy ! Component: 100 - total flux cleaned = 0.0430219 Jy ! Component: 150 - total flux cleaned = 0.0482511 Jy ! Component: 200 - total flux cleaned = 0.0487218 Jy ! Total flux subtracted in 200 components = 0.0487218 Jy ! Clean residual min=-0.005321 max=0.010033 Jy/beam ! Clean residual mean=0.000133 rms=0.002022 Jy/beam ! Combined flux in latest and established models = 0.230343 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 36 model components to the UV plane model. ! The established model now contains 55 components and 0.230343 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193699Jy sigma=0.001258 ! Fit after self-cal, rms=0.193517Jy sigma=0.001257 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.229 x 8.028 at -1.1 degrees (North through East) ! Clean map min=-0.0051102 max=0.15615 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01419 ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 1.10 HN 1.00* KP 0.99 ! LA 0.94 MK 0.85 NL 1.17 OV 0.93 ! PT 1.02 SC 1.00 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.01779 ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 0.97 HN 1.00* KP 1.00* ! LA 0.94 MK 0.99 NL 1.16 OV 0.95 ! PT 0.96 SC 0.98 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.193517Jy sigma=0.001257 ! Fit after self-cal, rms=0.192552Jy sigma=0.001253 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192552Jy sigma=0.001253 ! Fit after self-cal, rms=0.192551Jy sigma=0.001253 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.203 mas, bmaj=7.932 mas, bpa=-1.58 degrees ! Estimated noise=1048.85 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00346748 Jy ! Component: 100 - total flux cleaned = 0.00372614 Jy ! Component: 150 - total flux cleaned = 0.00363889 Jy ! Component: 200 - total flux cleaned = 0.00355844 Jy ! Total flux subtracted in 200 components = 0.00355844 Jy ! Clean residual min=-0.005312 max=0.006504 Jy/beam ! Clean residual mean=0.000018 rms=0.001524 Jy/beam ! Combined flux in latest and established models = 0.233902 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 73 components and 0.233902 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192449Jy sigma=0.001252 ! Fit after self-cal, rms=0.192431Jy sigma=0.001252 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192431Jy sigma=0.001252 ! Fit after self-cal, rms=0.190726Jy sigma=0.001242 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000854558 Jy ! Component: 100 - total flux cleaned = 0.000757447 Jy ! Component: 150 - total flux cleaned = 0.000760933 Jy ! Component: 200 - total flux cleaned = 0.000611489 Jy ! Total flux subtracted in 200 components = 0.000611489 Jy ! Clean residual min=-0.004972 max=0.005888 Jy/beam ! Clean residual mean=0.000012 rms=0.001482 Jy/beam ! Combined flux in latest and established models = 0.234513 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 88 components and 0.234513 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.190653Jy sigma=0.001241 ! Fit after self-cal, rms=0.190449Jy sigma=0.001240 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.203 x 7.932 at -1.58 degrees (North through East) ! Clean map min=-0.0048561 max=0.15383 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.190449Jy sigma=0.001240 ! Fit after self-cal, rms=0.187731Jy sigma=0.001239 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.187731Jy sigma=0.001239 ! Fit after self-cal, rms=0.187695Jy sigma=0.001239 ! Inverting map and beam ! Estimated beam: bmin=3.188 mas, bmaj=7.855 mas, bpa=-1.882 degrees ! Estimated noise=1031.34 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00108114 Jy ! Component: 100 - total flux cleaned = -0.00106528 Jy ! Component: 150 - total flux cleaned = -0.00125937 Jy ! Component: 200 - total flux cleaned = -0.00137361 Jy ! Total flux subtracted in 200 components = -0.00137361 Jy ! Clean residual min=-0.004468 max=0.006015 Jy/beam ! Clean residual mean=0.000008 rms=0.001401 Jy/beam ! Combined flux in latest and established models = 0.23314 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 112 components and 0.23314 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.187645Jy sigma=0.001239 ! Fit after self-cal, rms=0.187644Jy sigma=0.001239 ! Inverting map ! Added new window around map position (37.5, -49). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0044949 Jy ! Component: 100 - total flux cleaned = 0.00438011 Jy ! Component: 150 - total flux cleaned = 0.00428412 Jy ! Component: 200 - total flux cleaned = 0.00401896 Jy ! Total flux subtracted in 200 components = 0.00401896 Jy ! Clean residual min=-0.004151 max=0.004194 Jy/beam ! Clean residual mean=-0.000028 rms=0.001284 Jy/beam ! Combined flux in latest and established models = 0.237159 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 139 components and 0.237158 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.187471Jy sigma=0.001237 ! Fit after self-cal, rms=0.187465Jy sigma=0.001237 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.187465Jy sigma=0.001237 ! Fit after self-cal, rms=0.186326Jy sigma=0.001238 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.186326Jy sigma=0.001238 ! Fit after self-cal, rms=0.186330Jy sigma=0.001238 ! Inverting map and beam ! Estimated beam: bmin=3.169 mas, bmaj=7.843 mas, bpa=-1.414 degrees ! Estimated noise=1029.6 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00205827 Jy ! Component: 100 - total flux cleaned = 0.001968 Jy ! Component: 150 - total flux cleaned = 0.00181319 Jy ! Component: 200 - total flux cleaned = 0.0016663 Jy ! Total flux subtracted in 200 components = 0.0016663 Jy ! Clean residual min=-0.004396 max=0.004443 Jy/beam ! Clean residual mean=-0.000042 rms=0.001333 Jy/beam ! Combined flux in latest and established models = 0.238825 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 158 components and 0.238825 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.186258Jy sigma=0.001238 ! Fit after self-cal, rms=0.186255Jy sigma=0.001238 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.857 mas, bmaj=23.64 mas, bpa=5.846 degrees ! Estimated noise=1309.22 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000462093 Jy ! Component: 100 - total flux cleaned = 0.000253212 Jy ! Component: 150 - total flux cleaned = 7.75672e-05 Jy ! Component: 200 - total flux cleaned = -0.00011634 Jy ! Total flux subtracted in 200 components = -0.00011634 Jy ! Clean residual min=-0.005058 max=0.005069 Jy/beam ! Clean residual mean=-0.000056 rms=0.001862 Jy/beam ! Combined flux in latest and established models = 0.238708 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 179 components and 0.238708 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.186249Jy sigma=0.001238 ! Fit after self-cal, rms=0.186247Jy sigma=0.001238 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.402 mas, bmaj=5.914 mas, bpa=2.57 degrees ! Estimated noise=1826.13 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.141831 Jy ! Component: 100 - total flux cleaned = 0.182322 Jy ! Component: 150 - total flux cleaned = 0.203315 Jy ! Component: 200 - total flux cleaned = 0.216487 Jy ! Total flux subtracted in 200 components = 0.216487 Jy ! Clean residual min=-0.007329 max=0.009009 Jy/beam ! Clean residual mean=-0.000033 rms=0.002088 Jy/beam ! Combined flux in latest and established models = 0.216487 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 40 model components to the UV plane model. ! The established model now contains 40 components and 0.216487 Jy ! Inverting map and beam ! Estimated beam: bmin=3.169 mas, bmaj=7.843 mas, bpa=-1.414 degrees ! Estimated noise=1029.6 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.5, 7). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0133071 Jy ! Component: 100 - total flux cleaned = 0.0204626 Jy ! Component: 150 - total flux cleaned = 0.0240367 Jy ! Component: 200 - total flux cleaned = 0.0247084 Jy ! Total flux subtracted in 200 components = 0.0247084 Jy ! Clean residual min=-0.004360 max=0.004452 Jy/beam ! Clean residual mean=-0.000062 rms=0.001366 Jy/beam ! Combined flux in latest and established models = 0.241196 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 80 components and 0.241196 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.857 mas, bmaj=23.64 mas, bpa=5.846 degrees ! Estimated noise=1309.22 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00134766 Jy ! Component: 100 - total flux cleaned = 0.00124362 Jy ! Component: 150 - total flux cleaned = 0.00108534 Jy ! Component: 200 - total flux cleaned = 0.000937518 Jy ! Total flux subtracted in 200 components = 0.000937518 Jy ! Clean residual min=-0.004721 max=0.005018 Jy/beam ! Clean residual mean=-0.000108 rms=0.001837 Jy/beam ! Combined flux in latest and established models = 0.242133 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 107 components and 0.242133 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.169 mas, bmaj=7.843 mas, bpa=-1.414 degrees ! Estimated noise=1029.6 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000895897 Jy ! Component: 100 - total flux cleaned = -0.00110154 Jy ! Component: 150 - total flux cleaned = -0.00128633 Jy ! Component: 200 - total flux cleaned = -0.00136805 Jy ! Total flux subtracted in 200 components = -0.00136805 Jy ! Clean residual min=-0.004195 max=0.004130 Jy/beam ! Clean residual mean=-0.000057 rms=0.001257 Jy/beam ! Combined flux in latest and established models = 0.240765 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 123 components and 0.240765 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.186180Jy sigma=0.001237 ! Fit after self-cal, rms=0.186174Jy sigma=0.001237 wmodel J1324-3235_S_2002_01_31_yyk\_map.mod ! Writing 123 model components to file: J1324-3235_S_2002_01_31_yyk_map.mod wobs J1324-3235_S_2002_01_31_yyk\_uvs.fits ! Writing UV FITS file: J1324-3235_S_2002_01_31_yyk_uvs.fits wwins J1324-3235_S_2002_01_31_yyk\_map.win ! wwins: Wrote 4 windows to J1324-3235_S_2002_01_31_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000537252 Jy ! Component: 100 - total flux cleaned = -0.00117915 Jy ! Component: 150 - total flux cleaned = -0.00131461 Jy ! Component: 200 - total flux cleaned = -0.00137628 Jy ! Component: 250 - total flux cleaned = -0.00131508 Jy ! Component: 300 - total flux cleaned = -0.00143051 Jy ! Component: 350 - total flux cleaned = -0.00148524 Jy ! Component: 400 - total flux cleaned = -0.00164506 Jy ! Component: 450 - total flux cleaned = -0.00174891 Jy ! Component: 500 - total flux cleaned = -0.00189908 Jy ! Component: 550 - total flux cleaned = -0.00204537 Jy ! Component: 600 - total flux cleaned = -0.00223486 Jy ! Component: 650 - total flux cleaned = -0.00227972 Jy ! Component: 700 - total flux cleaned = -0.00236879 Jy ! Component: 750 - total flux cleaned = -0.00232372 Jy ! Component: 800 - total flux cleaned = -0.00236656 Jy ! Component: 850 - total flux cleaned = -0.00240896 Jy ! Component: 900 - total flux cleaned = -0.00253344 Jy ! Component: 950 - total flux cleaned = -0.00265508 Jy ! Component: 1000 - total flux cleaned = -0.00269552 Jy ! Component: 1050 - total flux cleaned = -0.00285132 Jy ! Component: 1100 - total flux cleaned = -0.00292814 Jy ! Component: 1150 - total flux cleaned = -0.00311653 Jy ! Component: 1200 - total flux cleaned = -0.00330086 Jy ! Component: 1250 - total flux cleaned = -0.00344618 Jy ! Component: 1300 - total flux cleaned = -0.00355348 Jy ! Component: 1350 - total flux cleaned = -0.00365938 Jy ! Component: 1400 - total flux cleaned = -0.00383316 Jy ! Component: 1450 - total flux cleaned = -0.00397018 Jy ! Component: 1500 - total flux cleaned = -0.00407094 Jy ! Component: 1550 - total flux cleaned = -0.00423731 Jy ! Component: 1600 - total flux cleaned = -0.00436826 Jy ! Component: 1650 - total flux cleaned = -0.00452996 Jy ! Component: 1700 - total flux cleaned = -0.00459378 Jy ! Component: 1750 - total flux cleaned = -0.00478332 Jy ! Component: 1800 - total flux cleaned = -0.00496953 Jy ! Component: 1850 - total flux cleaned = -0.00503099 Jy ! Component: 1900 - total flux cleaned = -0.00524276 Jy ! Component: 1950 - total flux cleaned = -0.0053323 Jy ! Component: 2000 - total flux cleaned = -0.00547985 Jy ! Total flux subtracted in 2048 components = -0.00547988 Jy ! Clean residual min=-0.001811 max=0.001781 Jy/beam ! Clean residual mean=-0.000025 rms=0.000618 Jy/beam ! Combined flux in latest and established models = 0.235285 Jy keep ! Adding 126 model components to the UV plane model. ! The established model now contains 249 components and 0.235285 Jy ![Exited script file: muppet] wmap "J1324-3235_S_2002_01_31_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.169 x 7.843 at -1.414 degrees (North through East) ! Clean map min=-0.0033863 max=0.14413 Jy/beam ! Writing clean map to FITS file: J1324-3235_S_2002_01_31_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.144127 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000619738 device "J1324-3235_S_2002_01_31_yyk\_map.eps/VPS" ! Attempting to open device: 'J1324-3235_S_2002_01_31_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.28999 1.28999 2.57997 5.15994 10.3199 20.6398 41.2795 82.559 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.144 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.169 x 7.843 at -1.414 degrees (North through East) ! Clean map min=-0.0033863 max=0.14413 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1324-3235_S_2002_01_31_yyk\_map.gif/gif" ! Attempting to open device: 'J1324-3235_S_2002_01_31_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1324-3235_S_2002_01_31_yyk_uvs.log closed on Tue Jun 26 22:49:53 2007