! Started logfile: J1323-4452_S_2002_01_31_yyk_uvs.log on Tue Jun 26 22:49:21 2007 obs J1323-4452_S_2002_01_31_yyk_uva.fits ! Reading UV FITS file: J1323-4452_S_2002_01_31_yyk_uva.fits ! AN table 1: 39 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.311681 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1323-4452 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22947e+09 8e+06 1 8e+06 ! 02 2 2.25947e+09 8e+06 1 8e+06 ! 03 3 2.34947e+09 8e+06 1 8e+06 ! 04 4 2.36947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1225 lines of history. ! ! Reading 2188 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1323-4452_S_2002_01_31_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.718054 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.621 mas, bmaj=33.08 mas, bpa=-18.27 degrees ! Estimated noise=3230.41 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.405255 Jy ! Component: 100 - total flux cleaned = 0.569977 Jy ! Total flux subtracted in 100 components = 0.569977 Jy ! Clean residual min=-0.067912 max=0.069346 Jy/beam ! Clean residual mean=0.008690 rms=0.030148 Jy/beam ! Combined flux in latest and established models = 0.569977 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 43 model components to the UV plane model. ! The established model now contains 43 components and 0.569977 Jy ! ! Correcting IF 1. ! A total of 167 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 205 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 167 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 167 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.404487Jy sigma=0.002404 ! Fit after self-cal, rms=0.404992Jy sigma=0.002401 ! Inverting map and beam ! Estimated beam: bmin=2.621 mas, bmaj=33.08 mas, bpa=-18.27 degrees ! Estimated noise=3231.2 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.385 mas, bmaj=35.31 mas, bpa=-17.63 degrees ! Estimated noise=2565.89 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0593516 Jy ! Component: 100 - total flux cleaned = 0.0796742 Jy ! Component: 150 - total flux cleaned = 0.111751 Jy ! Component: 200 - total flux cleaned = 0.143437 Jy ! Total flux subtracted in 200 components = 0.143437 Jy ! Clean residual min=-0.036715 max=0.036818 Jy/beam ! Clean residual mean=0.011125 rms=0.021625 Jy/beam ! Combined flux in latest and established models = 0.713415 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 147 model components to the UV plane model. ! The established model now contains 186 components and 0.713415 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.300504Jy sigma=0.001773 ! Fit after self-cal, rms=0.298838Jy sigma=0.001761 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.385 x 35.31 at -17.63 degrees (North through East) ! Clean map min=-0.091728 max=0.36538 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01239 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.27 HN 1.00* KP 0.95 ! LA 0.78 MK 0.89 NL 1.00* OV 1.08 ! PT 0.91 SC 1.00* ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.911442 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.08 HN 1.00* KP 1.00* ! LA 0.84 MK 2.12 NL 1.00* OV 1.13 ! PT 0.81 SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.02312 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.00* KP 0.99 ! LA 0.87 MK 0.69 NL 1.00* OV 1.18 ! PT 1.02 SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.01843 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.91 HN 1.00* KP 1.07 ! LA 0.74 MK 1.17 NL 1.00* OV 1.06 ! PT 0.86 SC 1.00* ! ! ! Fit before self-cal, rms=0.298838Jy sigma=0.001761 ! Fit after self-cal, rms=0.273363Jy sigma=0.001605 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.273363Jy sigma=0.001605 ! Fit after self-cal, rms=0.273494Jy sigma=0.001604 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.453 mas, bmaj=39.12 mas, bpa=-17.79 degrees ! Estimated noise=2365.93 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0455586 Jy ! Component: 100 - total flux cleaned = 0.0558829 Jy ! Component: 150 - total flux cleaned = 0.0647597 Jy ! Component: 200 - total flux cleaned = 0.0739553 Jy ! Total flux subtracted in 200 components = 0.0739553 Jy ! Clean residual min=-0.015385 max=0.015674 Jy/beam ! Clean residual mean=0.003823 rms=0.006538 Jy/beam ! Combined flux in latest and established models = 0.78737 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 65 model components to the UV plane model. ! The established model now contains 251 components and 0.78737 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.257899Jy sigma=0.001489 ! Fit after self-cal, rms=0.256630Jy sigma=0.001478 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.256630Jy sigma=0.001478 ! Fit after self-cal, rms=0.254050Jy sigma=0.001463 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00143111 Jy ! Component: 100 - total flux cleaned = 0.00776834 Jy ! Component: 150 - total flux cleaned = 0.0156486 Jy ! Component: 200 - total flux cleaned = 0.0228335 Jy ! Total flux subtracted in 200 components = 0.0228335 Jy ! Clean residual min=-0.007809 max=0.007896 Jy/beam ! Clean residual mean=0.003156 rms=0.003292 Jy/beam ! Combined flux in latest and established models = 0.810204 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 77 model components to the UV plane model. ! The established model now contains 325 components and 0.810204 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.249730Jy sigma=0.001435 ! Fit after self-cal, rms=0.248741Jy sigma=0.001428 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.453 x 39.12 at -17.79 degrees (North through East) ! Clean map min=-0.071822 max=0.34008 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.248741Jy sigma=0.001428 ! Fit after self-cal, rms=0.244109Jy sigma=0.001374 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.244109Jy sigma=0.001374 ! Fit after self-cal, rms=0.244027Jy sigma=0.001374 ! Inverting map and beam ! Estimated beam: bmin=3.716 mas, bmaj=38.83 mas, bpa=-17.62 degrees ! Estimated noise=2395.08 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00632702 Jy ! Component: 100 - total flux cleaned = 0.0185271 Jy ! Component: 150 - total flux cleaned = 0.0293706 Jy ! Component: 200 - total flux cleaned = 0.0374639 Jy ! Total flux subtracted in 200 components = 0.0374639 Jy ! Clean residual min=-0.005293 max=0.005386 Jy/beam ! Clean residual mean=0.001732 rms=0.002515 Jy/beam ! Combined flux in latest and established models = 0.847668 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 90 model components to the UV plane model. ! The established model now contains 412 components and 0.847668 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.241763Jy sigma=0.001359 ! Fit after self-cal, rms=0.241517Jy sigma=0.001358 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.241517Jy sigma=0.001358 ! Fit after self-cal, rms=0.247307Jy sigma=0.001351 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.247307Jy sigma=0.001351 ! Fit after self-cal, rms=0.247317Jy sigma=0.001351 ! Inverting map and beam ! Estimated beam: bmin=3.825 mas, bmaj=38.8 mas, bpa=-17.53 degrees ! Estimated noise=2407.01 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00468679 Jy ! Component: 100 - total flux cleaned = 0.0103349 Jy ! Component: 150 - total flux cleaned = 0.0154181 Jy ! Component: 200 - total flux cleaned = 0.0177976 Jy ! Total flux subtracted in 200 components = 0.0177976 Jy ! Clean residual min=-0.004123 max=0.004144 Jy/beam ! Clean residual mean=0.001386 rms=0.001732 Jy/beam ! Combined flux in latest and established models = 0.865465 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 62 model components to the UV plane model. ! The established model now contains 468 components and 0.865465 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.246345Jy sigma=0.001344 ! Fit after self-cal, rms=0.246277Jy sigma=0.001344 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=13.35 mas, bmaj=56.7 mas, bpa=-2.161 degrees ! Estimated noise=2779.51 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00881721 Jy ! Component: 100 - total flux cleaned = 0.016679 Jy ! Component: 150 - total flux cleaned = 0.0221287 Jy ! Component: 200 - total flux cleaned = 0.0282535 Jy ! Total flux subtracted in 200 components = 0.0282535 Jy ! Clean residual min=-0.003457 max=0.003420 Jy/beam ! Clean residual mean=0.001431 rms=0.001583 Jy/beam ! Combined flux in latest and established models = 0.893719 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 95 model components to the UV plane model. ! The established model now contains 553 components and 0.893719 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.245822Jy sigma=0.001341 ! Fit after self-cal, rms=0.245793Jy sigma=0.001340 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.728 mas, bmaj=34.36 mas, bpa=-18.25 degrees ! Estimated noise=3342.72 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.40049 Jy ! Component: 100 - total flux cleaned = 0.56958 Jy ! Component: 150 - total flux cleaned = 0.62833 Jy ! Component: 200 - total flux cleaned = 0.65914 Jy ! Total flux subtracted in 200 components = 0.65914 Jy ! Clean residual min=-0.038437 max=0.038294 Jy/beam ! Clean residual mean=0.003301 rms=0.020927 Jy/beam ! Combined flux in latest and established models = 0.65914 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 109 model components to the UV plane model. ! The established model now contains 109 components and 0.65914 Jy ! Inverting map and beam ! Estimated beam: bmin=3.825 mas, bmaj=38.8 mas, bpa=-17.53 degrees ! Estimated noise=2407.01 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0788545 Jy ! Component: 100 - total flux cleaned = 0.102307 Jy ! Component: 150 - total flux cleaned = 0.0978529 Jy ! Component: 200 - total flux cleaned = 0.0980681 Jy ! Total flux subtracted in 200 components = 0.0980681 Jy ! Clean residual min=-0.020291 max=0.020154 Jy/beam ! Clean residual mean=0.004420 rms=0.013108 Jy/beam ! Combined flux in latest and established models = 0.757208 Jy ! Adding 147 model components to the UV plane model. ! The established model now contains 252 components and 0.757208 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=13.35 mas, bmaj=56.7 mas, bpa=-2.161 degrees ! Estimated noise=2779.51 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0279541 Jy ! Component: 100 - total flux cleaned = 0.0503275 Jy ! Component: 150 - total flux cleaned = 0.0692689 Jy ! Component: 200 - total flux cleaned = 0.0881391 Jy ! Total flux subtracted in 200 components = 0.0881391 Jy ! Clean residual min=-0.014188 max=0.014365 Jy/beam ! Clean residual mean=0.005154 rms=0.007782 Jy/beam ! Combined flux in latest and established models = 0.845347 Jy ! Adding 100 model components to the UV plane model. ! The established model now contains 350 components and 0.845347 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.825 mas, bmaj=38.8 mas, bpa=-17.53 degrees ! Estimated noise=2407.01 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0106571 Jy ! Component: 100 - total flux cleaned = 0.0252912 Jy ! Component: 150 - total flux cleaned = 0.039034 Jy ! Component: 200 - total flux cleaned = 0.0511089 Jy ! Total flux subtracted in 200 components = 0.0511089 Jy ! Clean residual min=-0.006877 max=0.006984 Jy/beam ! Clean residual mean=0.003077 rms=0.003129 Jy/beam ! Combined flux in latest and established models = 0.896456 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 82 model components to the UV plane model. ! The established model now contains 432 components and 0.896456 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.248616Jy sigma=0.001361 ! Fit after self-cal, rms=0.247808Jy sigma=0.001358 wmodel J1323-4452_S_2002_01_31_yyk\_map.mod ! Writing 432 model components to file: J1323-4452_S_2002_01_31_yyk_map.mod wobs J1323-4452_S_2002_01_31_yyk\_uvs.fits ! Writing UV FITS file: J1323-4452_S_2002_01_31_yyk_uvs.fits wwins J1323-4452_S_2002_01_31_yyk\_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J1323-4452_S_2002_01_31_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.825 x 38.8 at -17.53 degrees (North through East) ! Clean map min=-0.040664 max=0.22385 Jy/beam ! Writing clean map to FITS file: J1323-4452_S_2002_01_31_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.223851 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.004908 device "J1323-4452_S_2002_01_31_yyk\_map.eps/VPS" ! Attempting to open device: 'J1323-4452_S_2002_01_31_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -6.57758 6.57758 13.1552 26.3103 52.6206 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0147 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.223 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.825 x 38.8 at -17.53 degrees (North through East) ! Clean map min=-0.040664 max=0.22385 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1323-4452_S_2002_01_31_yyk\_map.gif/gif" ! Attempting to open device: 'J1323-4452_S_2002_01_31_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1323-4452_S_2002_01_31_yyk_uvs.log closed on Tue Jun 26 22:49:29 2007