! Started logfile: J1300-3253_X_2002_01_31_yyk_uvs.log on Wed Jun 27 10:57:26 2007 obs J1300-3253_X_2002_01_31_yyk_uva.fits ! Reading UV FITS file: J1300-3253_X_2002_01_31_yyk_uva.fits ! AN table 1: 146 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.401979 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1300-3253 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40947e+09 8e+06 1 8e+06 ! 02 2 8.47947e+09 8e+06 1 8e+06 ! 03 3 8.79447e+09 8e+06 1 8e+06 ! 04 4 8.89947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1544 lines of history. ! ! Reading 10564 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 flag NL ! Flagging baselines of antenna 1:NL in the currently selected channels. ![@muppet J1300-3253_X_2002_01_31_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.237479 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6673 mas, bmaj=1.579 mas, bpa=4.095 degrees ! Estimated noise=1918.73 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.143802 Jy ! Component: 100 - total flux cleaned = 0.172083 Jy ! Total flux subtracted in 100 components = 0.172083 Jy ! Clean residual min=-0.012992 max=0.013291 Jy/beam ! Clean residual mean=-0.000010 rms=0.003129 Jy/beam ! Combined flux in latest and established models = 0.172083 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.172083 Jy ! ! Correcting IF 1. ! A total of 874 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 874 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 874 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 874 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.161387Jy sigma=0.001273 ! Fit after self-cal, rms=0.161102Jy sigma=0.001271 ! Inverting map and beam ! Estimated beam: bmin=0.6673 mas, bmaj=1.579 mas, bpa=4.095 degrees ! Estimated noise=1919.96 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8618 mas, bmaj=2.11 mas, bpa=2.402 degrees ! Estimated noise=940.919 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.2, -1.8). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0165627 Jy ! Component: 100 - total flux cleaned = 0.0187766 Jy ! Component: 150 - total flux cleaned = 0.0188059 Jy ! Component: 200 - total flux cleaned = 0.0188192 Jy ! Total flux subtracted in 200 components = 0.0188192 Jy ! Clean residual min=-0.007140 max=0.006320 Jy/beam ! Clean residual mean=-0.000009 rms=0.001813 Jy/beam ! Combined flux in latest and established models = 0.190902 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 25 components and 0.190902 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159987Jy sigma=0.001260 ! Fit after self-cal, rms=0.159976Jy sigma=0.001260 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8618 x 2.11 at 2.402 degrees (North through East) ! Clean map min=-0.0065798 max=0.16969 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00915 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.93 HN 1.00* KP 1.03 ! LA 1.13 MK 0.96 NL 1.00* OV 0.94 ! PT 0.95 SC 1.00 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.01242 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.95 HN 1.00* KP 0.99 ! LA 1.12 MK 0.99 NL 1.00* OV 0.88 ! PT 1.01 SC 0.97 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.994332 ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.88 HN 1.00* KP 0.96 ! LA 1.14 MK 1.01 NL 1.00* OV 0.94 ! PT 1.02 SC 1.05 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.159976Jy sigma=0.001260 ! Fit after self-cal, rms=0.159263Jy sigma=0.001254 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159263Jy sigma=0.001254 ! Fit after self-cal, rms=0.159267Jy sigma=0.001254 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8654 mas, bmaj=2.122 mas, bpa=2.218 degrees ! Estimated noise=930.402 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00147655 Jy ! Component: 100 - total flux cleaned = 0.00127284 Jy ! Component: 150 - total flux cleaned = 0.00121661 Jy ! Component: 200 - total flux cleaned = 0.00121485 Jy ! Total flux subtracted in 200 components = 0.00121485 Jy ! Clean residual min=-0.004408 max=0.004969 Jy/beam ! Clean residual mean=0.000013 rms=0.001326 Jy/beam ! Combined flux in latest and established models = 0.192117 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 42 components and 0.192117 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159216Jy sigma=0.001253 ! Fit after self-cal, rms=0.159214Jy sigma=0.001253 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159214Jy sigma=0.001253 ! Fit after self-cal, rms=0.154252Jy sigma=0.001216 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000975207 Jy ! Component: 100 - total flux cleaned = 0.00080584 Jy ! Component: 150 - total flux cleaned = 0.000662753 Jy ! Component: 200 - total flux cleaned = 0.00055579 Jy ! Total flux subtracted in 200 components = 0.00055579 Jy ! Clean residual min=-0.004333 max=0.005006 Jy/beam ! Clean residual mean=0.000009 rms=0.001302 Jy/beam ! Combined flux in latest and established models = 0.192673 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 57 components and 0.192673 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153953Jy sigma=0.001214 ! Fit after self-cal, rms=0.153069Jy sigma=0.001207 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8654 x 2.122 at 2.218 degrees (North through East) ! Clean map min=-0.0045637 max=0.17533 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153069Jy sigma=0.001207 ! Fit after self-cal, rms=0.150689Jy sigma=0.001205 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150689Jy sigma=0.001205 ! Fit after self-cal, rms=0.150390Jy sigma=0.001202 ! Inverting map and beam ! Estimated beam: bmin=0.8439 mas, bmaj=2.107 mas, bpa=3.289 degrees ! Estimated noise=914.684 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000200479 Jy ! Component: 100 - total flux cleaned = 0.000488763 Jy ! Component: 150 - total flux cleaned = 0.000672005 Jy ! Component: 200 - total flux cleaned = 0.000753256 Jy ! Total flux subtracted in 200 components = 0.000753256 Jy ! Clean residual min=-0.004571 max=0.004761 Jy/beam ! Clean residual mean=-0.000019 rms=0.001199 Jy/beam ! Combined flux in latest and established models = 0.193426 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 74 components and 0.193426 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150352Jy sigma=0.001202 ! Fit after self-cal, rms=0.150196Jy sigma=0.001200 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150196Jy sigma=0.001200 ! Fit after self-cal, rms=0.149912Jy sigma=0.001198 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149912Jy sigma=0.001198 ! Fit after self-cal, rms=0.149822Jy sigma=0.001197 ! Inverting map and beam ! Estimated beam: bmin=0.8434 mas, bmaj=2.106 mas, bpa=3.055 degrees ! Estimated noise=910.935 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -2.63511e-05 Jy ! Component: 100 - total flux cleaned = 0.000191964 Jy ! Component: 150 - total flux cleaned = 0.000229663 Jy ! Component: 200 - total flux cleaned = 0.000261663 Jy ! Total flux subtracted in 200 components = 0.000261663 Jy ! Clean residual min=-0.004566 max=0.004860 Jy/beam ! Clean residual mean=-0.000027 rms=0.001185 Jy/beam ! Combined flux in latest and established models = 0.193688 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 84 components and 0.193688 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149803Jy sigma=0.001197 ! Fit after self-cal, rms=0.149747Jy sigma=0.001197 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.857 mas, bmaj=8.208 mas, bpa=12.08 degrees ! Estimated noise=1173.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00076489 Jy ! Component: 100 - total flux cleaned = 0.000757751 Jy ! Component: 150 - total flux cleaned = 0.000823623 Jy ! Component: 200 - total flux cleaned = 0.000885114 Jy ! Total flux subtracted in 200 components = 0.000885114 Jy ! Clean residual min=-0.004997 max=0.006306 Jy/beam ! Clean residual mean=-0.000046 rms=0.001600 Jy/beam ! Combined flux in latest and established models = 0.194573 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 90 components and 0.194573 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149746Jy sigma=0.001197 ! Fit after self-cal, rms=0.149708Jy sigma=0.001197 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6623 mas, bmaj=1.576 mas, bpa=4.423 degrees ! Estimated noise=1853.28 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.147663 Jy ! Component: 100 - total flux cleaned = 0.173314 Jy ! Component: 150 - total flux cleaned = 0.183663 Jy ! Component: 200 - total flux cleaned = 0.189715 Jy ! Total flux subtracted in 200 components = 0.189715 Jy ! Clean residual min=-0.007636 max=0.007223 Jy/beam ! Clean residual mean=-0.000020 rms=0.001970 Jy/beam ! Combined flux in latest and established models = 0.189715 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.189715 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8434 mas, bmaj=2.106 mas, bpa=3.055 degrees ! Estimated noise=910.935 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00390434 Jy ! Component: 100 - total flux cleaned = 0.00412792 Jy ! Component: 150 - total flux cleaned = 0.00438465 Jy ! Component: 200 - total flux cleaned = 0.00438583 Jy ! Total flux subtracted in 200 components = 0.00438583 Jy ! Clean residual min=-0.004662 max=0.004732 Jy/beam ! Clean residual mean=-0.000026 rms=0.001226 Jy/beam ! Combined flux in latest and established models = 0.194101 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 41 components and 0.194101 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.857 mas, bmaj=8.208 mas, bpa=12.08 degrees ! Estimated noise=1173.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000249133 Jy ! Component: 100 - total flux cleaned = -0.00017937 Jy ! Component: 150 - total flux cleaned = -0.000119854 Jy ! Component: 200 - total flux cleaned = -6.94285e-05 Jy ! Total flux subtracted in 200 components = -6.94285e-05 Jy ! Clean residual min=-0.005041 max=0.006276 Jy/beam ! Clean residual mean=-0.000046 rms=0.001628 Jy/beam ! Combined flux in latest and established models = 0.194031 Jy ! Adding 7 model components to the UV plane model. ! The established model now contains 47 components and 0.194031 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8434 mas, bmaj=2.106 mas, bpa=3.055 degrees ! Estimated noise=910.935 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00020856 Jy ! Component: 100 - total flux cleaned = -0.000318877 Jy ! Component: 150 - total flux cleaned = -0.000317834 Jy ! Component: 200 - total flux cleaned = -0.000317248 Jy ! Total flux subtracted in 200 components = -0.000317248 Jy ! Clean residual min=-0.004646 max=0.004927 Jy/beam ! Clean residual mean=-0.000026 rms=0.001193 Jy/beam ! Combined flux in latest and established models = 0.193714 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 56 components and 0.193714 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149762Jy sigma=0.001197 ! Fit after self-cal, rms=0.149734Jy sigma=0.001197 wmodel J1300-3253_X_2002_01_31_yyk\_map.mod ! Writing 56 model components to file: J1300-3253_X_2002_01_31_yyk_map.mod wobs J1300-3253_X_2002_01_31_yyk\_uvs.fits ! Applying 146 buffered edits. ! Writing UV FITS file: J1300-3253_X_2002_01_31_yyk_uvs.fits wwins J1300-3253_X_2002_01_31_yyk\_map.win ! wwins: Wrote 2 windows to J1300-3253_X_2002_01_31_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 4.13029e-05 Jy ! Component: 100 - total flux cleaned = -0.000259909 Jy ! Component: 150 - total flux cleaned = -0.000462207 Jy ! Component: 200 - total flux cleaned = -0.000721965 Jy ! Component: 250 - total flux cleaned = -0.000722921 Jy ! Component: 300 - total flux cleaned = -0.000898394 Jy ! Component: 350 - total flux cleaned = -0.00117243 Jy ! Component: 400 - total flux cleaned = -0.00159435 Jy ! Component: 450 - total flux cleaned = -0.00189959 Jy ! Component: 500 - total flux cleaned = -0.0022434 Jy ! Component: 550 - total flux cleaned = -0.00272085 Jy ! Component: 600 - total flux cleaned = -0.0030904 Jy ! Component: 650 - total flux cleaned = -0.00349463 Jy ! Component: 700 - total flux cleaned = -0.00384438 Jy ! Component: 750 - total flux cleaned = -0.00422873 Jy ! Component: 800 - total flux cleaned = -0.00451977 Jy ! Component: 850 - total flux cleaned = -0.00480357 Jy ! Component: 900 - total flux cleaned = -0.00508064 Jy ! Component: 950 - total flux cleaned = -0.00531356 Jy ! Component: 1000 - total flux cleaned = -0.00561844 Jy ! Component: 1050 - total flux cleaned = -0.00591625 Jy ! Component: 1100 - total flux cleaned = -0.00620757 Jy ! Component: 1150 - total flux cleaned = -0.00642205 Jy ! Component: 1200 - total flux cleaned = -0.0067018 Jy ! Component: 1250 - total flux cleaned = -0.00683912 Jy ! Component: 1300 - total flux cleaned = -0.00707511 Jy ! Component: 1350 - total flux cleaned = -0.00727397 Jy ! Component: 1400 - total flux cleaned = -0.00743677 Jy ! Component: 1450 - total flux cleaned = -0.007501 Jy ! Component: 1500 - total flux cleaned = -0.00759621 Jy ! Component: 1550 - total flux cleaned = -0.00765865 Jy ! Component: 1600 - total flux cleaned = -0.00768962 Jy ! Component: 1650 - total flux cleaned = -0.0078101 Jy ! Component: 1700 - total flux cleaned = -0.00789945 Jy ! Component: 1750 - total flux cleaned = -0.00795829 Jy ! Component: 1800 - total flux cleaned = -0.00792974 Jy ! Component: 1850 - total flux cleaned = -0.00804528 Jy ! Component: 1900 - total flux cleaned = -0.00818758 Jy ! Component: 1950 - total flux cleaned = -0.008272 Jy ! Component: 2000 - total flux cleaned = -0.0084386 Jy ! Total flux subtracted in 2048 components = -0.0084386 Jy ! Clean residual min=-0.001626 max=0.001655 Jy/beam ! Clean residual mean=-0.000007 rms=0.000523 Jy/beam ! Combined flux in latest and established models = 0.185275 Jy keep ! Adding 130 model components to the UV plane model. ! The established model now contains 186 components and 0.185275 Jy ![Exited script file: muppet] wmap "J1300-3253_X_2002_01_31_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8434 x 2.106 at 3.055 degrees (North through East) ! Clean map min=-0.0033519 max=0.17347 Jy/beam ! Writing clean map to FITS file: J1300-3253_X_2002_01_31_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.173468 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000522507 device "J1300-3253_X_2002_01_31_yyk\_map.eps/VPS" ! Attempting to open device: 'J1300-3253_X_2002_01_31_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.903638 0.903638 1.80728 3.61455 7.2291 14.4582 28.9164 57.8328 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.173 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8434 x 2.106 at 3.055 degrees (North through East) ! Clean map min=-0.0033519 max=0.17347 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1300-3253_X_2002_01_31_yyk\_map.gif/gif" ! Attempting to open device: 'J1300-3253_X_2002_01_31_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1300-3253_X_2002_01_31_yyk_uvs.log closed on Wed Jun 27 10:57:33 2007