! Started logfile: J1209-3214_S_2002_05_14_yyk_uvs.log on Tue Jun 26 22:45:03 2007 obs J1209-3214_S_2002_05_14_yyk_uva.fits ! Reading UV FITS file: J1209-3214_S_2002_05_14_yyk_uva.fits ! AN table 1: 106 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.673375 visibilities/baseline/integration-bin. ! Found source: J1209-3214 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22947e+09 8e+06 1 8e+06 ! 02 2 2.25947e+09 8e+06 1 8e+06 ! 03 3 2.34947e+09 8e+06 1 8e+06 ! 04 4 2.36947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 12848 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1209-3214_S_2002_05_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.35369 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.181 mas, bmaj=6.598 mas, bpa=0.266 degrees ! Estimated noise=1916.9 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.183132 Jy ! Component: 100 - total flux cleaned = 0.221719 Jy ! Total flux subtracted in 100 components = 0.221719 Jy ! Clean residual min=-0.012189 max=0.022552 Jy/beam ! Clean residual mean=-0.000077 rms=0.003677 Jy/beam ! Combined flux in latest and established models = 0.221719 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.221719 Jy ! ! Correcting IF 1. ! A total of 280 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 353 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 282 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 280 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.284837Jy sigma=0.001280 ! Fit after self-cal, rms=0.281689Jy sigma=0.001275 ! Inverting map and beam ! Estimated beam: bmin=2.18 mas, bmaj=6.592 mas, bpa=0.2335 degrees ! Estimated noise=2085.48 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.903 mas, bmaj=7.976 mas, bpa=0.1924 degrees ! Estimated noise=1128.41 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, 6). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0243948 Jy ! Component: 100 - total flux cleaned = 0.0325822 Jy ! Component: 150 - total flux cleaned = 0.0343734 Jy ! Component: 200 - total flux cleaned = 0.035498 Jy ! Total flux subtracted in 200 components = 0.035498 Jy ! Clean residual min=-0.006245 max=0.011191 Jy/beam ! Clean residual mean=-0.000014 rms=0.002043 Jy/beam ! Combined flux in latest and established models = 0.257217 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 27 components and 0.257217 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.279817Jy sigma=0.001264 ! Fit after self-cal, rms=0.279709Jy sigma=0.001263 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.903 x 7.976 at 0.1924 degrees (North through East) ! Clean map min=-0.0061748 max=0.20978 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.979734 ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.13 HN 1.38 KP 0.93 ! LA 1.00 NL 0.89 OV 0.99 PT 1.02 ! SC 1.02 MK 0.96 ! ! ! Correcting IF 2. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.940074 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.99 HN 1.58 KP 1.00* ! LA 0.94 NL 1.05 OV 1.00 PT 1.00 ! SC 1.01 MK 1.13 ! ! ! Correcting IF 3. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.919571 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.92 HN 1.74 KP 1.00 ! LA 0.97 NL 1.11 OV 1.04 PT 1.21 ! SC 0.92 MK 1.02 ! ! ! Correcting IF 4. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.991402 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.86 HN 1.58 KP 1.04 ! LA 0.80 NL 1.06 OV 0.93 PT 0.95 ! SC 0.95 MK 0.97 ! ! ! Fit before self-cal, rms=0.279709Jy sigma=0.001263 ! Fit after self-cal, rms=0.332415Jy sigma=0.001255 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.332415Jy sigma=0.001255 ! Fit after self-cal, rms=0.332432Jy sigma=0.001255 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.968 mas, bmaj=7.9 mas, bpa=1.438 degrees ! Estimated noise=1041.88 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0157337 Jy ! Component: 100 - total flux cleaned = -0.0187336 Jy ! Component: 150 - total flux cleaned = -0.0190946 Jy ! Component: 200 - total flux cleaned = -0.0192007 Jy ! Total flux subtracted in 200 components = -0.0192007 Jy ! Clean residual min=-0.004917 max=0.004642 Jy/beam ! Clean residual mean=-0.000069 rms=0.001287 Jy/beam ! Combined flux in latest and established models = 0.238017 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 42 components and 0.238017 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.331554Jy sigma=0.001250 ! Fit after self-cal, rms=0.331548Jy sigma=0.001250 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.331548Jy sigma=0.001250 ! Fit after self-cal, rms=0.329023Jy sigma=0.001240 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000227353 Jy ! Component: 100 - total flux cleaned = 0.000116734 Jy ! Component: 150 - total flux cleaned = 0.000270162 Jy ! Component: 200 - total flux cleaned = 0.000485422 Jy ! Total flux subtracted in 200 components = 0.000485422 Jy ! Clean residual min=-0.005113 max=0.004343 Jy/beam ! Clean residual mean=-0.000075 rms=0.001241 Jy/beam ! Combined flux in latest and established models = 0.238502 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 56 components and 0.238502 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.328997Jy sigma=0.001240 ! Fit after self-cal, rms=0.328467Jy sigma=0.001238 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.968 x 7.9 at 1.438 degrees (North through East) ! Clean map min=-0.0061268 max=0.19832 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.328467Jy sigma=0.001238 ! Fit after self-cal, rms=0.603282Jy sigma=0.001230 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.603282Jy sigma=0.001230 ! Fit after self-cal, rms=0.603238Jy sigma=0.001230 ! Inverting map and beam ! Estimated beam: bmin=2.956 mas, bmaj=7.925 mas, bpa=1.196 degrees ! Estimated noise=1033.22 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000306609 Jy ! Component: 100 - total flux cleaned = -0.000127213 Jy ! Component: 150 - total flux cleaned = -0.000131608 Jy ! Component: 200 - total flux cleaned = -0.000180455 Jy ! Total flux subtracted in 200 components = -0.000180455 Jy ! Clean residual min=-0.004874 max=0.004380 Jy/beam ! Clean residual mean=-0.000051 rms=0.001087 Jy/beam ! Combined flux in latest and established models = 0.238321 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 72 components and 0.238321 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.603245Jy sigma=0.001230 ! Fit after self-cal, rms=0.603244Jy sigma=0.001230 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.603244Jy sigma=0.001230 ! Fit after self-cal, rms=0.670017Jy sigma=0.001227 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.670017Jy sigma=0.001227 ! Fit after self-cal, rms=0.670151Jy sigma=0.001227 ! Inverting map and beam ! Estimated beam: bmin=2.947 mas, bmaj=7.927 mas, bpa=1.132 degrees ! Estimated noise=1034.18 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000376227 Jy ! Component: 100 - total flux cleaned = 0.000475006 Jy ! Component: 150 - total flux cleaned = 0.000568815 Jy ! Component: 200 - total flux cleaned = 0.000699128 Jy ! Total flux subtracted in 200 components = 0.000699128 Jy ! Clean residual min=-0.004842 max=0.004265 Jy/beam ! Clean residual mean=-0.000045 rms=0.001078 Jy/beam ! Combined flux in latest and established models = 0.239021 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 90 components and 0.239021 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.670152Jy sigma=0.001227 ! Fit after self-cal, rms=0.670174Jy sigma=0.001227 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.291 mas, bmaj=23.87 mas, bpa=7.131 degrees ! Estimated noise=1352.52 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00045223 Jy ! Component: 100 - total flux cleaned = -0.000539235 Jy ! Component: 150 - total flux cleaned = -0.000576695 Jy ! Component: 200 - total flux cleaned = -0.00061263 Jy ! Total flux subtracted in 200 components = -0.00061263 Jy ! Clean residual min=-0.004261 max=0.003664 Jy/beam ! Clean residual mean=-0.000096 rms=0.001394 Jy/beam ! Combined flux in latest and established models = 0.238408 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 96 components and 0.238408 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.670199Jy sigma=0.001227 ! Fit after self-cal, rms=0.670253Jy sigma=0.001227 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.217 mas, bmaj=6.445 mas, bpa=0.7497 degrees ! Estimated noise=1837.33 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.175267 Jy ! Component: 100 - total flux cleaned = 0.212536 Jy ! Component: 150 - total flux cleaned = 0.225988 Jy ! Component: 200 - total flux cleaned = 0.231379 Jy ! Total flux subtracted in 200 components = 0.231379 Jy ! Clean residual min=-0.007727 max=0.007372 Jy/beam ! Clean residual mean=-0.000022 rms=0.002077 Jy/beam ! Combined flux in latest and established models = 0.231378 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.231378 Jy ! Inverting map and beam ! Estimated beam: bmin=2.947 mas, bmaj=7.927 mas, bpa=1.132 degrees ! Estimated noise=1034.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00485583 Jy ! Component: 100 - total flux cleaned = 0.00534595 Jy ! Component: 150 - total flux cleaned = 0.0056237 Jy ! Component: 200 - total flux cleaned = 0.00584962 Jy ! Total flux subtracted in 200 components = 0.00584962 Jy ! Clean residual min=-0.004597 max=0.004129 Jy/beam ! Clean residual mean=-0.000046 rms=0.001064 Jy/beam ! Combined flux in latest and established models = 0.237228 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 46 components and 0.237228 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.291 mas, bmaj=23.87 mas, bpa=7.131 degrees ! Estimated noise=1352.52 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000205315 Jy ! Component: 100 - total flux cleaned = 0.000246648 Jy ! Component: 150 - total flux cleaned = 0.00029865 Jy ! Component: 200 - total flux cleaned = 0.000343616 Jy ! Total flux subtracted in 200 components = 0.000343616 Jy ! Clean residual min=-0.003805 max=0.003523 Jy/beam ! Clean residual mean=-0.000093 rms=0.001364 Jy/beam ! Combined flux in latest and established models = 0.237572 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 63 components and 0.237572 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.947 mas, bmaj=7.927 mas, bpa=1.132 degrees ! Estimated noise=1034.18 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000262855 Jy ! Component: 100 - total flux cleaned = 0.000358679 Jy ! Component: 150 - total flux cleaned = 0.000443175 Jy ! Component: 200 - total flux cleaned = 0.000479276 Jy ! Total flux subtracted in 200 components = 0.000479276 Jy ! Clean residual min=-0.004570 max=0.004211 Jy/beam ! Clean residual mean=-0.000045 rms=0.001051 Jy/beam ! Combined flux in latest and established models = 0.238051 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 79 components and 0.238051 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.670292Jy sigma=0.001227 ! Fit after self-cal, rms=0.670344Jy sigma=0.001227 wmodel J1209-3214_S_2002_05_14_yyk\_map.mod ! Writing 79 model components to file: J1209-3214_S_2002_05_14_yyk_map.mod wobs J1209-3214_S_2002_05_14_yyk\_uvs.fits ! Writing UV FITS file: J1209-3214_S_2002_05_14_yyk_uvs.fits wwins J1209-3214_S_2002_05_14_yyk\_map.win ! wwins: Wrote 2 windows to J1209-3214_S_2002_05_14_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000263998 Jy ! Component: 100 - total flux cleaned = -0.000603468 Jy ! Component: 150 - total flux cleaned = -0.0011521 Jy ! Component: 200 - total flux cleaned = -0.00132542 Jy ! Component: 250 - total flux cleaned = -0.00137902 Jy ! Component: 300 - total flux cleaned = -0.00148154 Jy ! Component: 350 - total flux cleaned = -0.00153046 Jy ! Component: 400 - total flux cleaned = -0.00152989 Jy ! Component: 450 - total flux cleaned = -0.00162122 Jy ! Component: 500 - total flux cleaned = -0.00153139 Jy ! Component: 550 - total flux cleaned = -0.00166316 Jy ! Component: 600 - total flux cleaned = -0.00166355 Jy ! Component: 650 - total flux cleaned = -0.00187131 Jy ! Component: 700 - total flux cleaned = -0.00195196 Jy ! Component: 750 - total flux cleaned = -0.00215058 Jy ! Component: 800 - total flux cleaned = -0.00238337 Jy ! Component: 850 - total flux cleaned = -0.0025351 Jy ! Component: 900 - total flux cleaned = -0.00272202 Jy ! Component: 950 - total flux cleaned = -0.00297837 Jy ! Component: 1000 - total flux cleaned = -0.00330163 Jy ! Component: 1050 - total flux cleaned = -0.00351328 Jy ! Component: 1100 - total flux cleaned = -0.00382548 Jy ! Component: 1150 - total flux cleaned = -0.00406482 Jy ! Component: 1200 - total flux cleaned = -0.00443438 Jy ! Component: 1250 - total flux cleaned = -0.00466632 Jy ! Component: 1300 - total flux cleaned = -0.00499185 Jy ! Component: 1350 - total flux cleaned = -0.00521686 Jy ! Component: 1400 - total flux cleaned = -0.00546974 Jy ! Component: 1450 - total flux cleaned = -0.0056568 Jy ! Component: 1500 - total flux cleaned = -0.00584149 Jy ! Component: 1550 - total flux cleaned = -0.00602306 Jy ! Component: 1600 - total flux cleaned = -0.006053 Jy ! Component: 1650 - total flux cleaned = -0.00626021 Jy ! Component: 1700 - total flux cleaned = -0.00620164 Jy ! Component: 1750 - total flux cleaned = -0.00643346 Jy ! Component: 1800 - total flux cleaned = -0.00657655 Jy ! Component: 1850 - total flux cleaned = -0.00668943 Jy ! Component: 1900 - total flux cleaned = -0.00688481 Jy ! Component: 1950 - total flux cleaned = -0.00685717 Jy ! Component: 2000 - total flux cleaned = -0.00702137 Jy ! Total flux subtracted in 2048 components = -0.0070755 Jy ! Clean residual min=-0.001771 max=0.001467 Jy/beam ! Clean residual mean=-0.000051 rms=0.000548 Jy/beam ! Combined flux in latest and established models = 0.230975 Jy keep ! Adding 149 model components to the UV plane model. ! The established model now contains 228 components and 0.230976 Jy ![Exited script file: muppet] wmap "J1209-3214_S_2002_05_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.947 x 7.927 at 1.132 degrees (North through East) ! Clean map min=-0.0031903 max=0.20087 Jy/beam ! Writing clean map to FITS file: J1209-3214_S_2002_05_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.200874 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000542156 device "J1209-3214_S_2002_05_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J1209-3214_S_2002_05_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.809696 0.809696 1.61939 3.23878 6.47756 12.9551 25.9103 51.8205 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.2 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.947 x 7.927 at 1.132 degrees (North through East) ! Clean map min=-0.0031903 max=0.20087 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1209-3214_S_2002_05_14_yyk\_map.gif/gif" ! Attempting to open device: 'J1209-3214_S_2002_05_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1209-3214_S_2002_05_14_yyk_uvs.log closed on Tue Jun 26 22:45:11 2007