! Started logfile: J1155-3107_X_2002_05_14_yyk_uvs.log on Tue Jun 26 22:44:32 2007 obs J1155-3107_X_2002_05_14_yyk_uva.fits ! Reading UV FITS file: J1155-3107_X_2002_05_14_yyk_uva.fits ! AN table 1: 76 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.888596 visibilities/baseline/integration-bin. ! Found source: J1155-3107 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40947e+09 8e+06 1 8e+06 ! 02 2 8.47947e+09 8e+06 1 8e+06 ! 03 3 8.79447e+09 8e+06 1 8e+06 ! 04 4 8.89947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1077 lines of history. ! ! Reading 12156 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1155-3107_X_2002_05_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.268737 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6547 mas, bmaj=1.701 mas, bpa=0.8883 degrees ! Estimated noise=1638.91 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.128837 Jy ! Component: 100 - total flux cleaned = 0.150654 Jy ! Total flux subtracted in 100 components = 0.150654 Jy ! Clean residual min=-0.011943 max=0.017730 Jy/beam ! Clean residual mean=-0.000032 rms=0.002982 Jy/beam ! Combined flux in latest and established models = 0.150654 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.150654 Jy ! ! Correcting IF 1. ! A total of 65 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 65 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.222565Jy sigma=0.001279 ! Fit after self-cal, rms=0.221012Jy sigma=0.001274 ! Inverting map and beam ! Estimated beam: bmin=0.6547 mas, bmaj=1.701 mas, bpa=0.8883 degrees ! Estimated noise=1638.91 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.845 mas, bmaj=2.212 mas, bpa=0.7811 degrees ! Estimated noise=923.044 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0185197 Jy ! Component: 100 - total flux cleaned = 0.0241913 Jy ! Component: 150 - total flux cleaned = 0.0254589 Jy ! Component: 200 - total flux cleaned = 0.0256665 Jy ! Total flux subtracted in 200 components = 0.0256665 Jy ! Clean residual min=-0.005304 max=0.007172 Jy/beam ! Clean residual mean=0.000012 rms=0.001525 Jy/beam ! Combined flux in latest and established models = 0.176321 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 20 components and 0.176321 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.220802Jy sigma=0.001266 ! Fit after self-cal, rms=0.220696Jy sigma=0.001265 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.845 x 2.212 at 0.7811 degrees (North through East) ! Clean map min=-0.0048327 max=0.15954 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Fit before self-cal, rms=0.220696Jy sigma=0.001265 ! Fit after self-cal, rms=0.220568Jy sigma=0.001265 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.220568Jy sigma=0.001265 ! Fit after self-cal, rms=0.220432Jy sigma=0.001265 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8449 mas, bmaj=2.213 mas, bpa=0.7667 degrees ! Estimated noise=923.233 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00022388 Jy ! Component: 100 - total flux cleaned = 0.000394445 Jy ! Component: 150 - total flux cleaned = 0.000497161 Jy ! Component: 200 - total flux cleaned = 0.000639009 Jy ! Total flux subtracted in 200 components = 0.000639009 Jy ! Clean residual min=-0.005156 max=0.006716 Jy/beam ! Clean residual mean=0.000014 rms=0.001497 Jy/beam ! Combined flux in latest and established models = 0.17696 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 23 components and 0.17696 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.220400Jy sigma=0.001265 ! Fit after self-cal, rms=0.220392Jy sigma=0.001265 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.220392Jy sigma=0.001265 ! Fit after self-cal, rms=0.217829Jy sigma=0.001245 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1, 2). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00616585 Jy ! Component: 100 - total flux cleaned = 0.00573351 Jy ! Component: 150 - total flux cleaned = 0.00537178 Jy ! Component: 200 - total flux cleaned = 0.0051635 Jy ! Total flux subtracted in 200 components = 0.0051635 Jy ! Clean residual min=-0.004866 max=0.006923 Jy/beam ! Clean residual mean=0.000023 rms=0.001441 Jy/beam ! Combined flux in latest and established models = 0.182123 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 47 components and 0.182123 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.217350Jy sigma=0.001243 ! Fit after self-cal, rms=0.216549Jy sigma=0.001240 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8449 x 2.213 at 0.7667 degrees (North through East) ! Clean map min=-0.0045621 max=0.15913 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.216549Jy sigma=0.001240 ! Fit after self-cal, rms=0.217276Jy sigma=0.001238 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.217276Jy sigma=0.001238 ! Fit after self-cal, rms=0.217113Jy sigma=0.001238 ! Inverting map and beam ! Estimated beam: bmin=0.8412 mas, bmaj=2.209 mas, bpa=1.127 degrees ! Estimated noise=919.444 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00249876 Jy ! Component: 100 - total flux cleaned = 0.00250809 Jy ! Component: 150 - total flux cleaned = 0.00250838 Jy ! Component: 200 - total flux cleaned = 0.00257329 Jy ! Total flux subtracted in 200 components = 0.00257329 Jy ! Clean residual min=-0.004243 max=0.004658 Jy/beam ! Clean residual mean=-0.000004 rms=0.001227 Jy/beam ! Combined flux in latest and established models = 0.184697 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 65 components and 0.184697 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.216954Jy sigma=0.001237 ! Fit after self-cal, rms=0.216875Jy sigma=0.001237 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.216875Jy sigma=0.001237 ! Fit after self-cal, rms=0.216500Jy sigma=0.001237 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.216500Jy sigma=0.001237 ! Fit after self-cal, rms=0.216474Jy sigma=0.001237 ! Inverting map and beam ! Estimated beam: bmin=0.8364 mas, bmaj=2.194 mas, bpa=1.277 degrees ! Estimated noise=916.953 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000916082 Jy ! Component: 100 - total flux cleaned = 0.000922275 Jy ! Component: 150 - total flux cleaned = 0.000861335 Jy ! Component: 200 - total flux cleaned = 0.00085734 Jy ! Total flux subtracted in 200 components = 0.00085734 Jy ! Clean residual min=-0.004024 max=0.004637 Jy/beam ! Clean residual mean=-0.000010 rms=0.001209 Jy/beam ! Combined flux in latest and established models = 0.185554 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 83 components and 0.185554 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.216355Jy sigma=0.001236 ! Fit after self-cal, rms=0.216341Jy sigma=0.001236 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.415 mas, bmaj=7.088 mas, bpa=5.084 degrees ! Estimated noise=1187.19 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000992228 Jy ! Component: 100 - total flux cleaned = 0.000996512 Jy ! Component: 150 - total flux cleaned = 0.00102967 Jy ! Component: 200 - total flux cleaned = 0.00106167 Jy ! Total flux subtracted in 200 components = 0.00106167 Jy ! Clean residual min=-0.004027 max=0.004660 Jy/beam ! Clean residual mean=-0.000022 rms=0.001507 Jy/beam ! Combined flux in latest and established models = 0.186616 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 89 components and 0.186616 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.216310Jy sigma=0.001236 ! Fit after self-cal, rms=0.216311Jy sigma=0.001236 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6534 mas, bmaj=1.696 mas, bpa=1.046 degrees ! Estimated noise=1631.25 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.1347 Jy ! Component: 100 - total flux cleaned = 0.161569 Jy ! Component: 150 - total flux cleaned = 0.172869 Jy ! Component: 200 - total flux cleaned = 0.179567 Jy ! Total flux subtracted in 200 components = 0.179567 Jy ! Clean residual min=-0.008741 max=0.009494 Jy/beam ! Clean residual mean=-0.000018 rms=0.002221 Jy/beam ! Combined flux in latest and established models = 0.179567 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.179567 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8364 mas, bmaj=2.194 mas, bpa=1.277 degrees ! Estimated noise=916.953 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.8, -2). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0069625 Jy ! Component: 100 - total flux cleaned = 0.00663833 Jy ! Component: 150 - total flux cleaned = 0.00650353 Jy ! Component: 200 - total flux cleaned = 0.00649484 Jy ! Total flux subtracted in 200 components = 0.00649484 Jy ! Clean residual min=-0.003867 max=0.004905 Jy/beam ! Clean residual mean=-0.000009 rms=0.001190 Jy/beam ! Combined flux in latest and established models = 0.186062 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 55 components and 0.186062 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.415 mas, bmaj=7.088 mas, bpa=5.084 degrees ! Estimated noise=1187.19 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000189204 Jy ! Component: 100 - total flux cleaned = -5.49544e-05 Jy ! Component: 150 - total flux cleaned = -0.000199926 Jy ! Component: 200 - total flux cleaned = -0.000268692 Jy ! Total flux subtracted in 200 components = -0.000268692 Jy ! Clean residual min=-0.003999 max=0.004812 Jy/beam ! Clean residual mean=-0.000027 rms=0.001468 Jy/beam ! Combined flux in latest and established models = 0.185793 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 70 components and 0.185793 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8364 mas, bmaj=2.194 mas, bpa=1.277 degrees ! Estimated noise=916.953 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000225173 Jy ! Component: 100 - total flux cleaned = 0.000147123 Jy ! Component: 150 - total flux cleaned = 1.57317e-06 Jy ! Component: 200 - total flux cleaned = 1.88982e-06 Jy ! Total flux subtracted in 200 components = 1.88982e-06 Jy ! Clean residual min=-0.003896 max=0.005032 Jy/beam ! Clean residual mean=-0.000010 rms=0.001161 Jy/beam ! Combined flux in latest and established models = 0.185795 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 90 components and 0.185795 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.215868Jy sigma=0.001235 ! Fit after self-cal, rms=0.215796Jy sigma=0.001235 wmodel J1155-3107_X_2002_05_14_yyk\_map.mod ! Writing 90 model components to file: J1155-3107_X_2002_05_14_yyk_map.mod wobs J1155-3107_X_2002_05_14_yyk\_uvs.fits ! Writing UV FITS file: J1155-3107_X_2002_05_14_yyk_uvs.fits wwins J1155-3107_X_2002_05_14_yyk\_map.win ! wwins: Wrote 3 windows to J1155-3107_X_2002_05_14_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00213819 Jy ! Component: 100 - total flux cleaned = 0.00337933 Jy ! Component: 150 - total flux cleaned = 0.00427112 Jy ! Component: 200 - total flux cleaned = 0.00512434 Jy ! Component: 250 - total flux cleaned = 0.00581843 Jy ! Component: 300 - total flux cleaned = 0.00606251 Jy ! Component: 350 - total flux cleaned = 0.00647631 Jy ! Component: 400 - total flux cleaned = 0.00693682 Jy ! Component: 450 - total flux cleaned = 0.00732979 Jy ! Component: 500 - total flux cleaned = 0.00776799 Jy ! Component: 550 - total flux cleaned = 0.00803668 Jy ! Component: 600 - total flux cleaned = 0.00835309 Jy ! Component: 650 - total flux cleaned = 0.0086115 Jy ! Component: 700 - total flux cleaned = 0.00886535 Jy ! Component: 750 - total flux cleaned = 0.00906596 Jy ! Component: 800 - total flux cleaned = 0.00941041 Jy ! Component: 850 - total flux cleaned = 0.00974925 Jy ! Component: 900 - total flux cleaned = 0.00979693 Jy ! Component: 950 - total flux cleaned = 0.0101272 Jy ! Component: 1000 - total flux cleaned = 0.010312 Jy ! Component: 1050 - total flux cleaned = 0.0104949 Jy ! Component: 1100 - total flux cleaned = 0.0105408 Jy ! Component: 1150 - total flux cleaned = 0.0109423 Jy ! Component: 1200 - total flux cleaned = 0.0110743 Jy ! Component: 1250 - total flux cleaned = 0.0111183 Jy ! Component: 1300 - total flux cleaned = 0.0113348 Jy ! Component: 1350 - total flux cleaned = 0.0113777 Jy ! Component: 1400 - total flux cleaned = 0.0116311 Jy ! Component: 1450 - total flux cleaned = 0.0118394 Jy ! Component: 1500 - total flux cleaned = 0.0118397 Jy ! Component: 1550 - total flux cleaned = 0.0119625 Jy ! Component: 1600 - total flux cleaned = 0.0121231 Jy ! Component: 1650 - total flux cleaned = 0.0120828 Jy ! Component: 1700 - total flux cleaned = 0.0122019 Jy ! Component: 1750 - total flux cleaned = 0.0122405 Jy ! Component: 1800 - total flux cleaned = 0.0123571 Jy ! Component: 1850 - total flux cleaned = 0.0123956 Jy ! Component: 1900 - total flux cleaned = 0.0125095 Jy ! Component: 1950 - total flux cleaned = 0.0125095 Jy ! Component: 2000 - total flux cleaned = 0.0125839 Jy ! Total flux subtracted in 2048 components = 0.0127691 Jy ! Clean residual min=-0.002369 max=0.001906 Jy/beam ! Clean residual mean=-0.000025 rms=0.000738 Jy/beam ! Combined flux in latest and established models = 0.198564 Jy keep ! Adding 141 model components to the UV plane model. ! The established model now contains 231 components and 0.198564 Jy ![Exited script file: muppet] wmap "J1155-3107_X_2002_05_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8364 x 2.194 at 1.277 degrees (North through East) ! Clean map min=-0.003249 max=0.14932 Jy/beam ! Writing clean map to FITS file: J1155-3107_X_2002_05_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.149323 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000736394 device "J1155-3107_X_2002_05_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J1155-3107_X_2002_05_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.47947 1.47947 2.95894 5.91787 11.8357 23.6715 47.343 94.686 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0022 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.149 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8364 x 2.194 at 1.277 degrees (North through East) ! Clean map min=-0.003249 max=0.14932 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1155-3107_X_2002_05_14_yyk\_map.gif/gif" ! Attempting to open device: 'J1155-3107_X_2002_05_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1155-3107_X_2002_05_14_yyk_uvs.log closed on Tue Jun 26 22:44:39 2007