! Started logfile: J1155-3107_S_2002_01_31_yyk_uvs.log on Tue Jun 26 22:44:11 2007 obs J1155-3107_S_2002_01_31_yyk_uva.fits ! Reading UV FITS file: J1155-3107_S_2002_01_31_yyk_uva.fits ! AN table 1: 74 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.683483 visibilities/baseline/integration-bin. ! Found source: J1155-3107 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22947e+09 8e+06 1 8e+06 ! 02 2 2.25947e+09 8e+06 1 8e+06 ! 03 3 2.34947e+09 8e+06 1 8e+06 ! 04 4 2.36947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1224 lines of history. ! ! Reading 9104 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1155-3107_S_2002_01_31_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.215423 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.657 mas, bmaj=5.821 mas, bpa=-1.235 degrees ! Estimated noise=2154.27 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0935763 Jy ! Component: 100 - total flux cleaned = 0.106879 Jy ! Total flux subtracted in 100 components = 0.106879 Jy ! Clean residual min=-0.010955 max=0.013491 Jy/beam ! Clean residual mean=-0.000014 rms=0.003302 Jy/beam ! Combined flux in latest and established models = 0.106879 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.106879 Jy ! ! Correcting IF 1. ! A total of 142 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 196 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 132 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 132 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.185676Jy sigma=0.001200 ! Fit after self-cal, rms=0.185564Jy sigma=0.001199 ! Inverting map and beam ! Estimated beam: bmin=2.657 mas, bmaj=5.821 mas, bpa=-1.235 degrees ! Estimated noise=2154.65 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.533 mas, bmaj=8.371 mas, bpa=-7.793 degrees ! Estimated noise=1109.88 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00461473 Jy ! Component: 100 - total flux cleaned = 0.0051989 Jy ! Component: 150 - total flux cleaned = 0.0053556 Jy ! Component: 200 - total flux cleaned = 0.00535935 Jy ! Total flux subtracted in 200 components = 0.00535935 Jy ! Clean residual min=-0.005829 max=0.007044 Jy/beam ! Clean residual mean=0.000032 rms=0.001776 Jy/beam ! Combined flux in latest and established models = 0.112239 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 28 components and 0.112239 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.185476Jy sigma=0.001199 ! Fit after self-cal, rms=0.185478Jy sigma=0.001199 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.533 x 8.371 at -7.793 degrees (North through East) ! Clean map min=-0.0054919 max=0.10802 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01059 ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 1.12 HN 1.00* KP 0.99 ! LA 0.98 MK 0.99 NL 1.14 OV 0.95 ! PT 1.03 SC 0.84 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.02258 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.94 HN 1.00* KP 1.00* ! LA 1.01 MK 1.00 NL 1.15 OV 0.94 ! PT 0.91 SC 0.89 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.185478Jy sigma=0.001199 ! Fit after self-cal, rms=0.185778Jy sigma=0.001197 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.185778Jy sigma=0.001197 ! Fit after self-cal, rms=0.185776Jy sigma=0.001197 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.51 mas, bmaj=8.006 mas, bpa=-6.05 degrees ! Estimated noise=1112.05 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00135893 Jy ! Component: 100 - total flux cleaned = 0.00154505 Jy ! Component: 150 - total flux cleaned = 0.00159023 Jy ! Component: 200 - total flux cleaned = 0.00154938 Jy ! Total flux subtracted in 200 components = 0.00154938 Jy ! Clean residual min=-0.005513 max=0.006581 Jy/beam ! Clean residual mean=0.000009 rms=0.001710 Jy/beam ! Combined flux in latest and established models = 0.113788 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 33 components and 0.113788 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.185742Jy sigma=0.001197 ! Fit after self-cal, rms=0.185742Jy sigma=0.001197 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.185742Jy sigma=0.001197 ! Fit after self-cal, rms=0.184530Jy sigma=0.001189 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00128125 Jy ! Component: 100 - total flux cleaned = 0.0013244 Jy ! Component: 150 - total flux cleaned = 0.00128399 Jy ! Component: 200 - total flux cleaned = 0.00128172 Jy ! Total flux subtracted in 200 components = 0.00128172 Jy ! Clean residual min=-0.005287 max=0.006533 Jy/beam ! Clean residual mean=0.000013 rms=0.001662 Jy/beam ! Combined flux in latest and established models = 0.11507 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 38 components and 0.11507 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.184516Jy sigma=0.001189 ! Fit after self-cal, rms=0.184285Jy sigma=0.001188 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.51 x 8.006 at -6.05 degrees (North through East) ! Clean map min=-0.0048557 max=0.11084 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.184285Jy sigma=0.001188 ! Fit after self-cal, rms=0.184766Jy sigma=0.001188 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.184766Jy sigma=0.001188 ! Fit after self-cal, rms=0.184709Jy sigma=0.001187 ! Inverting map and beam ! Estimated beam: bmin=3.475 mas, bmaj=8.063 mas, bpa=-5.617 degrees ! Estimated noise=1104.65 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000164658 Jy ! Component: 100 - total flux cleaned = -0.000130999 Jy ! Component: 150 - total flux cleaned = -0.000128885 Jy ! Component: 200 - total flux cleaned = -0.000129599 Jy ! Total flux subtracted in 200 components = -0.000129599 Jy ! Clean residual min=-0.004765 max=0.006633 Jy/beam ! Clean residual mean=0.000006 rms=0.001571 Jy/beam ! Combined flux in latest and established models = 0.11494 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 41 components and 0.11494 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.184700Jy sigma=0.001187 ! Fit after self-cal, rms=0.184683Jy sigma=0.001187 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.184683Jy sigma=0.001187 ! Fit after self-cal, rms=0.186048Jy sigma=0.001187 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.186048Jy sigma=0.001187 ! Fit after self-cal, rms=0.186055Jy sigma=0.001187 ! Inverting map and beam ! Estimated beam: bmin=3.456 mas, bmaj=8.04 mas, bpa=-5.903 degrees ! Estimated noise=1103.3 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00020433 Jy ! Component: 100 - total flux cleaned = 0.000180688 Jy ! Component: 150 - total flux cleaned = 0.000159782 Jy ! Component: 200 - total flux cleaned = 0.000140757 Jy ! Total flux subtracted in 200 components = 0.000140757 Jy ! Clean residual min=-0.004723 max=0.006288 Jy/beam ! Clean residual mean=0.000016 rms=0.001513 Jy/beam ! Combined flux in latest and established models = 0.115081 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 46 components and 0.115081 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.186049Jy sigma=0.001187 ! Fit after self-cal, rms=0.186060Jy sigma=0.001187 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.181 mas, bmaj=23.26 mas, bpa=3.005 degrees ! Estimated noise=1349.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000628246 Jy ! Component: 100 - total flux cleaned = 0.000685677 Jy ! Component: 150 - total flux cleaned = 0.000730813 Jy ! Component: 200 - total flux cleaned = 0.000766642 Jy ! Total flux subtracted in 200 components = 0.000766642 Jy ! Clean residual min=-0.003501 max=0.005093 Jy/beam ! Clean residual mean=0.000051 rms=0.001609 Jy/beam ! Combined flux in latest and established models = 0.115848 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 5 model components to the UV plane model. ! The established model now contains 47 components and 0.115848 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.186067Jy sigma=0.001187 ! Fit after self-cal, rms=0.186075Jy sigma=0.001187 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.614 mas, bmaj=5.76 mas, bpa=0.06556 degrees ! Estimated noise=2109.45 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0943621 Jy ! Component: 100 - total flux cleaned = 0.109186 Jy ! Component: 150 - total flux cleaned = 0.1147 Jy ! Component: 200 - total flux cleaned = 0.115006 Jy ! Total flux subtracted in 200 components = 0.115006 Jy ! Clean residual min=-0.010256 max=0.012309 Jy/beam ! Clean residual mean=-0.000003 rms=0.003043 Jy/beam ! Combined flux in latest and established models = 0.115006 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.115006 Jy ! Inverting map and beam ! Estimated beam: bmin=3.456 mas, bmaj=8.04 mas, bpa=-5.903 degrees ! Estimated noise=1103.3 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0012054 Jy ! Component: 100 - total flux cleaned = 0.000957082 Jy ! Component: 150 - total flux cleaned = 0.000813813 Jy ! Component: 200 - total flux cleaned = 0.000749833 Jy ! Total flux subtracted in 200 components = 0.000749833 Jy ! Clean residual min=-0.004883 max=0.006410 Jy/beam ! Clean residual mean=0.000016 rms=0.001533 Jy/beam ! Combined flux in latest and established models = 0.115756 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 23 components and 0.115756 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.181 mas, bmaj=23.26 mas, bpa=3.005 degrees ! Estimated noise=1349.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000354505 Jy ! Component: 100 - total flux cleaned = 0.000361102 Jy ! Component: 150 - total flux cleaned = 0.000364737 Jy ! Component: 200 - total flux cleaned = 0.000367352 Jy ! Total flux subtracted in 200 components = 0.000367352 Jy ! Clean residual min=-0.003532 max=0.005149 Jy/beam ! Clean residual mean=0.000051 rms=0.001604 Jy/beam ! Combined flux in latest and established models = 0.116124 Jy ! Adding 3 model components to the UV plane model. ! The established model now contains 24 components and 0.116124 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.456 mas, bmaj=8.04 mas, bpa=-5.903 degrees ! Estimated noise=1103.3 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000746793 Jy ! Component: 100 - total flux cleaned = -0.000876893 Jy ! Component: 150 - total flux cleaned = -0.000871139 Jy ! Component: 200 - total flux cleaned = -0.000863727 Jy ! Total flux subtracted in 200 components = -0.000863727 Jy ! Clean residual min=-0.004919 max=0.006409 Jy/beam ! Clean residual mean=0.000016 rms=0.001505 Jy/beam ! Combined flux in latest and established models = 0.11526 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 30 components and 0.11526 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.186089Jy sigma=0.001187 ! Fit after self-cal, rms=0.186101Jy sigma=0.001187 wmodel J1155-3107_S_2002_01_31_yyk\_map.mod ! Writing 30 model components to file: J1155-3107_S_2002_01_31_yyk_map.mod wobs J1155-3107_S_2002_01_31_yyk\_uvs.fits ! Writing UV FITS file: J1155-3107_S_2002_01_31_yyk_uvs.fits wwins J1155-3107_S_2002_01_31_yyk\_map.win ! wwins: Wrote 1 windows to J1155-3107_S_2002_01_31_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00277197 Jy ! Component: 100 - total flux cleaned = 0.00417133 Jy ! Component: 150 - total flux cleaned = 0.00533567 Jy ! Component: 200 - total flux cleaned = 0.00667943 Jy ! Component: 250 - total flux cleaned = 0.00789351 Jy ! Component: 300 - total flux cleaned = 0.00891429 Jy ! Component: 350 - total flux cleaned = 0.00954794 Jy ! Component: 400 - total flux cleaned = 0.0101593 Jy ! Component: 450 - total flux cleaned = 0.0108161 Jy ! Component: 500 - total flux cleaned = 0.011515 Jy ! Component: 550 - total flux cleaned = 0.0121317 Jy ! Component: 600 - total flux cleaned = 0.0125533 Jy ! Component: 650 - total flux cleaned = 0.0129059 Jy ! Component: 700 - total flux cleaned = 0.0133059 Jy ! Component: 750 - total flux cleaned = 0.0135284 Jy ! Component: 800 - total flux cleaned = 0.0136375 Jy ! Component: 850 - total flux cleaned = 0.0139062 Jy ! Component: 900 - total flux cleaned = 0.013959 Jy ! Component: 950 - total flux cleaned = 0.0141153 Jy ! Component: 1000 - total flux cleaned = 0.0142685 Jy ! Component: 1050 - total flux cleaned = 0.0142691 Jy ! Component: 1100 - total flux cleaned = 0.0143184 Jy ! Component: 1150 - total flux cleaned = 0.0144634 Jy ! Component: 1200 - total flux cleaned = 0.014558 Jy ! Component: 1250 - total flux cleaned = 0.0145582 Jy ! Component: 1300 - total flux cleaned = 0.0146979 Jy ! Component: 1350 - total flux cleaned = 0.0148357 Jy ! Component: 1400 - total flux cleaned = 0.0150606 Jy ! Component: 1450 - total flux cleaned = 0.0150161 Jy ! Component: 1500 - total flux cleaned = 0.0151906 Jy ! Component: 1550 - total flux cleaned = 0.0152331 Jy ! Component: 1600 - total flux cleaned = 0.0154447 Jy ! Component: 1650 - total flux cleaned = 0.0154438 Jy ! Component: 1700 - total flux cleaned = 0.0154841 Jy ! Component: 1750 - total flux cleaned = 0.0156472 Jy ! Component: 1800 - total flux cleaned = 0.0156866 Jy ! Component: 1850 - total flux cleaned = 0.0157662 Jy ! Component: 1900 - total flux cleaned = 0.015884 Jy ! Component: 1950 - total flux cleaned = 0.0160778 Jy ! Component: 2000 - total flux cleaned = 0.0161934 Jy ! Total flux subtracted in 2048 components = 0.016497 Jy ! Clean residual min=-0.002083 max=0.002383 Jy/beam ! Clean residual mean=-0.000001 rms=0.000786 Jy/beam ! Combined flux in latest and established models = 0.131757 Jy keep ! Adding 126 model components to the UV plane model. ! The established model now contains 156 components and 0.131757 Jy ![Exited script file: muppet] wmap "J1155-3107_S_2002_01_31_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.456 x 8.04 at -5.903 degrees (North through East) ! Clean map min=-0.0033179 max=0.1086 Jy/beam ! Writing clean map to FITS file: J1155-3107_S_2002_01_31_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.1086 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000765201 device "J1155-3107_S_2002_01_31_yyk\_map.eps/VPS" ! Attempting to open device: 'J1155-3107_S_2002_01_31_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.11382 2.11382 4.22764 8.45527 16.9105 33.8211 67.6422 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0022 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.108 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.456 x 8.04 at -5.903 degrees (North through East) ! Clean map min=-0.0033179 max=0.1086 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1155-3107_S_2002_01_31_yyk\_map.gif/gif" ! Attempting to open device: 'J1155-3107_S_2002_01_31_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1155-3107_S_2002_01_31_yyk_uvs.log closed on Tue Jun 26 22:44:18 2007