! Started logfile: J1154-3505_S_2002_05_14_yyk_uvs.log on Tue Jun 26 22:43:51 2007 obs J1154-3505_S_2002_05_14_yyk_uva.fits ! Reading UV FITS file: J1154-3505_S_2002_05_14_yyk_uva.fits ! AN table 1: 41 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.742547 visibilities/baseline/integration-bin. ! Found source: J1154-3505 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22947e+09 8e+06 1 8e+06 ! 02 2 2.25947e+09 8e+06 1 8e+06 ! 03 3 2.34947e+09 8e+06 1 8e+06 ! 04 4 2.36947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1153 lines of history. ! ! Reading 5480 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1154-3505_S_2002_05_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.30961 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.352 mas, bmaj=6.921 mas, bpa=8.221 degrees ! Estimated noise=2425.9 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.857895 Jy ! Component: 100 - total flux cleaned = 1.23563 Jy ! Total flux subtracted in 100 components = 1.23563 Jy ! Clean residual min=-0.118668 max=0.175323 Jy/beam ! Clean residual mean=-0.011911 rms=0.048774 Jy/beam ! Combined flux in latest and established models = 1.23563 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 49 model components to the UV plane model. ! The established model now contains 49 components and 1.23563 Jy ! ! Correcting IF 1. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 100 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.659565Jy sigma=0.004000 ! Fit after self-cal, rms=0.656643Jy sigma=0.003988 ! Inverting map and beam ! Estimated beam: bmin=2.352 mas, bmaj=6.921 mas, bpa=8.221 degrees ! Estimated noise=2426.55 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.06 mas, bmaj=8.203 mas, bpa=1.781 degrees ! Estimated noise=1678.85 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.297419 Jy ! Component: 100 - total flux cleaned = 0.418997 Jy ! Component: 150 - total flux cleaned = 0.460741 Jy ! Component: 200 - total flux cleaned = 0.468389 Jy ! Total flux subtracted in 200 components = 0.468389 Jy ! Clean residual min=-0.139145 max=0.177618 Jy/beam ! Clean residual mean=-0.016941 rms=0.056016 Jy/beam ! Combined flux in latest and established models = 1.70402 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 69 components and 1.70402 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.599091Jy sigma=0.003472 ! Fit after self-cal, rms=0.598924Jy sigma=0.003471 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.06 x 8.203 at 1.781 degrees (North through East) ! Clean map min=-0.13844 max=0.82787 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.923258 ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.06 HN 1.00* KP 0.77 ! LA 1.59 NL 1.37 OV 1.02 PT 0.78 ! SC 1.13 MK 1.22 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.923984 ! Telescope amplitude corrections in sub-array 1: ! BR 0.84 FD 0.89 HN 1.00* KP 1.00* ! LA 1.45 NL 1.44 OV 0.94 PT 0.90 ! SC 1.03 MK 1.33 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.881196 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.06 HN 1.00* KP 0.86 ! LA 1.63 NL 1.54 OV 0.99 PT 0.92 ! SC 1.13 MK 1.27 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.934049 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.01 HN 1.00* KP 0.88 ! LA 1.34 NL 1.59 OV 0.86 PT 0.79 ! SC 1.05 MK 1.23 ! ! ! Fit before self-cal, rms=0.598924Jy sigma=0.003471 ! Fit after self-cal, rms=0.527309Jy sigma=0.003170 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.527309Jy sigma=0.003170 ! Fit after self-cal, rms=0.533697Jy sigma=0.003159 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.505 mas, bmaj=9.055 mas, bpa=5.847 degrees ! Estimated noise=1450.96 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.198776 Jy ! Component: 100 - total flux cleaned = -0.244353 Jy ! Component: 150 - total flux cleaned = -0.242008 Jy ! Component: 200 - total flux cleaned = -0.239793 Jy ! Total flux subtracted in 200 components = -0.239793 Jy ! Clean residual min=-0.091715 max=0.141140 Jy/beam ! Clean residual mean=-0.007930 rms=0.041793 Jy/beam ! Combined flux in latest and established models = 1.46423 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 79 components and 1.46423 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.494691Jy sigma=0.002770 ! Fit after self-cal, rms=0.494944Jy sigma=0.002769 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.494944Jy sigma=0.002769 ! Fit after self-cal, rms=0.491987Jy sigma=0.002751 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00336288 Jy ! Component: 100 - total flux cleaned = 0.00540432 Jy ! Component: 150 - total flux cleaned = 0.00733596 Jy ! Component: 200 - total flux cleaned = 0.00915094 Jy ! Total flux subtracted in 200 components = 0.00915094 Jy ! Clean residual min=-0.091944 max=0.136387 Jy/beam ! Clean residual mean=-0.007879 rms=0.041272 Jy/beam ! Combined flux in latest and established models = 1.47338 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 84 components and 1.47338 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.489496Jy sigma=0.002730 ! Fit after self-cal, rms=0.489531Jy sigma=0.002728 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.505 x 9.055 at 5.847 degrees (North through East) ! Clean map min=-0.091639 max=0.7118 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.489531Jy sigma=0.002728 ! Fit after self-cal, rms=0.492824Jy sigma=0.002701 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.492824Jy sigma=0.002701 ! Fit after self-cal, rms=0.492775Jy sigma=0.002701 ! Inverting map and beam ! Estimated beam: bmin=3.607 mas, bmaj=9.385 mas, bpa=8.442 degrees ! Estimated noise=1462.85 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00760628 Jy ! Component: 100 - total flux cleaned = 0.010818 Jy ! Component: 150 - total flux cleaned = 0.0128137 Jy ! Component: 200 - total flux cleaned = 0.0155999 Jy ! Total flux subtracted in 200 components = 0.0155999 Jy ! Clean residual min=-0.090426 max=0.141225 Jy/beam ! Clean residual mean=-0.007792 rms=0.041678 Jy/beam ! Combined flux in latest and established models = 1.48898 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 89 components and 1.48898 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.488775Jy sigma=0.002676 ! Fit after self-cal, rms=0.489047Jy sigma=0.002675 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.489047Jy sigma=0.002675 ! Fit after self-cal, rms=0.495214Jy sigma=0.002669 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.495214Jy sigma=0.002669 ! Fit after self-cal, rms=0.495203Jy sigma=0.002669 ! Inverting map and beam ! Estimated beam: bmin=3.74 mas, bmaj=9.799 mas, bpa=9.673 degrees ! Estimated noise=1482.43 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00426384 Jy ! Component: 100 - total flux cleaned = 0.00726477 Jy ! Component: 150 - total flux cleaned = 0.00908167 Jy ! Component: 200 - total flux cleaned = 0.0108092 Jy ! Total flux subtracted in 200 components = 0.0108092 Jy ! Clean residual min=-0.091688 max=0.144358 Jy/beam ! Clean residual mean=-0.007910 rms=0.042295 Jy/beam ! Combined flux in latest and established models = 1.49979 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 98 components and 1.49979 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.491427Jy sigma=0.002647 ! Fit after self-cal, rms=0.491675Jy sigma=0.002646 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.782 mas, bmaj=35.14 mas, bpa=12.83 degrees ! Estimated noise=1739.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0384345 Jy ! Component: 100 - total flux cleaned = 0.0434388 Jy ! Component: 150 - total flux cleaned = 0.0466101 Jy ! Component: 200 - total flux cleaned = 0.0511575 Jy ! Total flux subtracted in 200 components = 0.0511575 Jy ! Clean residual min=-0.123131 max=0.174220 Jy/beam ! Clean residual mean=-0.011564 rms=0.059184 Jy/beam ! Combined flux in latest and established models = 1.55094 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 4 model components to the UV plane model. ! The established model now contains 98 components and 1.55095 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.491887Jy sigma=0.002655 ! Fit after self-cal, rms=0.491209Jy sigma=0.002655 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.523 mas, bmaj=7.45 mas, bpa=11.46 degrees ! Estimated noise=2353.52 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.799515 Jy ! Component: 100 - total flux cleaned = 1.10849 Jy ! Component: 150 - total flux cleaned = 1.26469 Jy ! Component: 200 - total flux cleaned = 1.34751 Jy ! Total flux subtracted in 200 components = 1.34751 Jy ! Clean residual min=-0.079429 max=0.108988 Jy/beam ! Clean residual mean=-0.005200 rms=0.030077 Jy/beam ! Combined flux in latest and established models = 1.34751 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 53 model components to the UV plane model. ! The established model now contains 53 components and 1.34751 Jy ! Inverting map and beam ! Estimated beam: bmin=3.74 mas, bmaj=9.799 mas, bpa=9.673 degrees ! Estimated noise=1482.43 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0778605 Jy ! Component: 100 - total flux cleaned = 0.0848375 Jy ! Component: 150 - total flux cleaned = 0.0913164 Jy ! Component: 200 - total flux cleaned = 0.0973936 Jy ! Total flux subtracted in 200 components = 0.0973936 Jy ! Clean residual min=-0.095756 max=0.160549 Jy/beam ! Clean residual mean=-0.008477 rms=0.044956 Jy/beam ! Combined flux in latest and established models = 1.44491 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 56 components and 1.44491 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.782 mas, bmaj=35.14 mas, bpa=12.83 degrees ! Estimated noise=1739.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0660552 Jy ! Component: 100 - total flux cleaned = 0.0720319 Jy ! Component: 150 - total flux cleaned = 0.0777661 Jy ! Component: 200 - total flux cleaned = 0.0832449 Jy ! Total flux subtracted in 200 components = 0.0832449 Jy ! Clean residual min=-0.125886 max=0.187673 Jy/beam ! Clean residual mean=-0.011927 rms=0.061563 Jy/beam ! Combined flux in latest and established models = 1.52815 Jy ! Adding 5 model components to the UV plane model. ! The established model now contains 57 components and 1.52815 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.74 mas, bmaj=9.799 mas, bpa=9.673 degrees ! Estimated noise=1482.43 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0406449 Jy ! Component: 100 - total flux cleaned = -0.0391395 Jy ! Component: 150 - total flux cleaned = -0.0379964 Jy ! Component: 200 - total flux cleaned = -0.036027 Jy ! Total flux subtracted in 200 components = -0.036027 Jy ! Clean residual min=-0.092767 max=0.144982 Jy/beam ! Clean residual mean=-0.008013 rms=0.042506 Jy/beam ! Combined flux in latest and established models = 1.49213 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 62 components and 1.49213 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.489684Jy sigma=0.002652 ! Fit after self-cal, rms=0.489619Jy sigma=0.002651 wmodel J1154-3505_S_2002_05_14_yyk\_map.mod ! Writing 62 model components to file: J1154-3505_S_2002_05_14_yyk_map.mod wobs J1154-3505_S_2002_05_14_yyk\_uvs.fits ! Writing UV FITS file: J1154-3505_S_2002_05_14_yyk_uvs.fits wwins J1154-3505_S_2002_05_14_yyk\_map.win ! wwins: Wrote 1 windows to J1154-3505_S_2002_05_14_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0614093 Jy ! Component: 100 - total flux cleaned = 0.111243 Jy ! Component: 150 - total flux cleaned = 0.15431 Jy ! Component: 200 - total flux cleaned = 0.177502 Jy ! Component: 250 - total flux cleaned = 0.191673 Jy ! Component: 300 - total flux cleaned = 0.198223 Jy ! Component: 350 - total flux cleaned = 0.204383 Jy ! Component: 400 - total flux cleaned = 0.210188 Jy ! Component: 450 - total flux cleaned = 0.216769 Jy ! Component: 500 - total flux cleaned = 0.224078 Jy ! Component: 550 - total flux cleaned = 0.227035 Jy ! Component: 600 - total flux cleaned = 0.22984 Jy ! Component: 650 - total flux cleaned = 0.229844 Jy ! Component: 700 - total flux cleaned = 0.230749 Jy ! Component: 750 - total flux cleaned = 0.227366 Jy ! Component: 800 - total flux cleaned = 0.22082 Jy ! Component: 850 - total flux cleaned = 0.216864 Jy ! Component: 900 - total flux cleaned = 0.212242 Jy ! Component: 950 - total flux cleaned = 0.207752 Jy ! Component: 1000 - total flux cleaned = 0.201923 Jy ! Component: 1050 - total flux cleaned = 0.196255 Jy ! Component: 1100 - total flux cleaned = 0.191416 Jy ! Component: 1150 - total flux cleaned = 0.186682 Jy ! Component: 1200 - total flux cleaned = 0.180743 Jy ! Component: 1250 - total flux cleaned = 0.17624 Jy ! Component: 1300 - total flux cleaned = 0.171215 Jy ! Component: 1350 - total flux cleaned = 0.16752 Jy ! Component: 1400 - total flux cleaned = 0.161504 Jy ! Component: 1450 - total flux cleaned = 0.156216 Jy ! Component: 1500 - total flux cleaned = 0.149882 Jy ! Component: 1550 - total flux cleaned = 0.143667 Jy ! Component: 1600 - total flux cleaned = 0.137574 Jy ! Component: 1650 - total flux cleaned = 0.131596 Jy ! Component: 1700 - total flux cleaned = 0.124658 Jy ! Component: 1750 - total flux cleaned = 0.118375 Jy ! Component: 1800 - total flux cleaned = 0.112204 Jy ! Component: 1850 - total flux cleaned = 0.106137 Jy ! Component: 1900 - total flux cleaned = 0.100173 Jy ! Component: 1950 - total flux cleaned = 0.0918587 Jy ! Component: 2000 - total flux cleaned = 0.0841399 Jy ! Total flux subtracted in 2048 components = 0.0784226 Jy ! Clean residual min=-0.031916 max=0.027474 Jy/beam ! Clean residual mean=-0.003074 rms=0.013198 Jy/beam ! Combined flux in latest and established models = 1.57055 Jy keep ! Adding 292 model components to the UV plane model. ! The established model now contains 354 components and 1.57055 Jy ![Exited script file: muppet] wmap "J1154-3505_S_2002_05_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.74 x 9.799 at 9.673 degrees (North through East) ! Clean map min=-0.081991 max=0.70073 Jy/beam ! Writing clean map to FITS file: J1154-3505_S_2002_05_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.700731 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0114389 device "J1154-3505_S_2002_05_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J1154-3505_S_2002_05_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -4.89729 4.89729 9.79457 19.5891 39.1783 78.3566 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0343 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.7 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.74 x 9.799 at 9.673 degrees (North through East) ! Clean map min=-0.081991 max=0.70073 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1154-3505_S_2002_05_14_yyk\_map.gif/gif" ! Attempting to open device: 'J1154-3505_S_2002_05_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1154-3505_S_2002_05_14_yyk_uvs.log closed on Tue Jun 26 22:43:58 2007