! Started logfile: J1154-3242_X_2002_01_31_yyk_uvs.log on Wed Jun 27 10:56:32 2007 obs J1154-3242_X_2002_01_31_yyk_uva.fits ! Reading UV FITS file: J1154-3242_X_2002_01_31_yyk_uva.fits ! AN table 1: 71 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.69734 visibilities/baseline/integration-bin. ! Found source: J1154-3242 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40947e+09 8e+06 1 8e+06 ! 02 2 8.47947e+09 8e+06 1 8e+06 ! 03 3 8.79447e+09 8e+06 1 8e+06 ! 04 4 8.89947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1544 lines of history. ! ! Reading 8912 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 flag NL ! Flagging baselines of antenna 1:NL in the currently selected channels. ![@muppet J1154-3242_X_2002_01_31_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.263545 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6893 mas, bmaj=1.549 mas, bpa=0.02881 degrees ! Estimated noise=1965.88 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.183426 Jy ! Component: 100 - total flux cleaned = 0.210402 Jy ! Total flux subtracted in 100 components = 0.210402 Jy ! Clean residual min=-0.010259 max=0.009623 Jy/beam ! Clean residual mean=0.000052 rms=0.002590 Jy/beam ! Combined flux in latest and established models = 0.210402 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.210402 Jy ! ! Correcting IF 1. ! A total of 187 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 187 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 187 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 187 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.151739Jy sigma=0.001224 ! Fit after self-cal, rms=0.151601Jy sigma=0.001222 ! Inverting map and beam ! Estimated beam: bmin=0.6893 mas, bmaj=1.549 mas, bpa=0.02802 degrees ! Estimated noise=1966.55 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9595 mas, bmaj=2.193 mas, bpa=-3.241 degrees ! Estimated noise=994.919 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00701605 Jy ! Component: 100 - total flux cleaned = 0.00822693 Jy ! Component: 150 - total flux cleaned = 0.00817312 Jy ! Component: 200 - total flux cleaned = 0.00807976 Jy ! Total flux subtracted in 200 components = 0.00807976 Jy ! Clean residual min=-0.009931 max=0.007544 Jy/beam ! Clean residual mean=0.000065 rms=0.002508 Jy/beam ! Combined flux in latest and established models = 0.218482 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 16 components and 0.218482 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151317Jy sigma=0.001220 ! Fit after self-cal, rms=0.151316Jy sigma=0.001220 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9595 x 2.193 at -3.241 degrees (North through East) ! Clean map min=-0.0092572 max=0.2149 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00607 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.91 HN 1.00* KP 0.99 ! LA 1.19 MK 0.98 NL 1.00* OV 0.92 ! PT 1.00 SC 1.00 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.01645 ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.92 HN 1.00* KP 0.98 ! LA 1.10 MK 0.96 NL 1.00* OV 0.92 ! PT 1.03 SC 0.98 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.999337 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.87 HN 1.00* KP 0.94 ! LA 1.10 MK 1.00 NL 1.00* OV 0.98 ! PT 1.10 SC 0.99 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.974818 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.85 HN 1.00* KP 1.07 ! LA 1.07 MK 1.05 NL 1.00* OV 0.98 ! PT 1.17 SC 1.05 ! ! ! Fit before self-cal, rms=0.151316Jy sigma=0.001220 ! Fit after self-cal, rms=0.148716Jy sigma=0.001204 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148716Jy sigma=0.001204 ! Fit after self-cal, rms=0.148713Jy sigma=0.001204 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9584 mas, bmaj=2.197 mas, bpa=-3.147 degrees ! Estimated noise=989.033 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000767622 Jy ! Component: 100 - total flux cleaned = 0.000838351 Jy ! Component: 150 - total flux cleaned = 0.000871608 Jy ! Component: 200 - total flux cleaned = 0.000928961 Jy ! Total flux subtracted in 200 components = 0.000928961 Jy ! Clean residual min=-0.004029 max=0.004585 Jy/beam ! Clean residual mean=0.000027 rms=0.001097 Jy/beam ! Combined flux in latest and established models = 0.219411 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 20 components and 0.219411 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148704Jy sigma=0.001204 ! Fit after self-cal, rms=0.148701Jy sigma=0.001204 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148701Jy sigma=0.001204 ! Fit after self-cal, rms=0.144111Jy sigma=0.001171 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00108114 Jy ! Component: 100 - total flux cleaned = 0.000999943 Jy ! Component: 150 - total flux cleaned = 0.00100128 Jy ! Component: 200 - total flux cleaned = 0.00099442 Jy ! Total flux subtracted in 200 components = 0.00099442 Jy ! Clean residual min=-0.003908 max=0.004908 Jy/beam ! Clean residual mean=0.000032 rms=0.001117 Jy/beam ! Combined flux in latest and established models = 0.220405 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 25 components and 0.220405 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.144029Jy sigma=0.001170 ! Fit after self-cal, rms=0.143107Jy sigma=0.001164 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9584 x 2.197 at -3.147 degrees (North through East) ! Clean map min=-0.0035878 max=0.2178 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143107Jy sigma=0.001164 ! Fit after self-cal, rms=0.142725Jy sigma=0.001162 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142725Jy sigma=0.001162 ! Fit after self-cal, rms=0.142491Jy sigma=0.001160 ! Inverting map and beam ! Estimated beam: bmin=0.948 mas, bmaj=2.145 mas, bpa=-2.004 degrees ! Estimated noise=983.925 mJy/beam. ! Added new window around map position (3.2, -0.8). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00431716 Jy ! Component: 100 - total flux cleaned = 0.00468436 Jy ! Component: 150 - total flux cleaned = 0.00497499 Jy ! Component: 200 - total flux cleaned = 0.00517205 Jy ! Total flux subtracted in 200 components = 0.00517205 Jy ! Clean residual min=-0.003328 max=0.003719 Jy/beam ! Clean residual mean=0.000032 rms=0.000945 Jy/beam ! Combined flux in latest and established models = 0.225577 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 43 components and 0.225577 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142381Jy sigma=0.001159 ! Fit after self-cal, rms=0.142305Jy sigma=0.001159 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142305Jy sigma=0.001159 ! Fit after self-cal, rms=0.142267Jy sigma=0.001155 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142267Jy sigma=0.001155 ! Fit after self-cal, rms=0.142243Jy sigma=0.001155 ! Inverting map and beam ! Estimated beam: bmin=0.9489 mas, bmaj=2.139 mas, bpa=-2.032 degrees ! Estimated noise=983.557 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00132237 Jy ! Component: 100 - total flux cleaned = 0.00145108 Jy ! Component: 150 - total flux cleaned = 0.00152656 Jy ! Component: 200 - total flux cleaned = 0.00156361 Jy ! Total flux subtracted in 200 components = 0.00156361 Jy ! Clean residual min=-0.003235 max=0.003632 Jy/beam ! Clean residual mean=0.000033 rms=0.000907 Jy/beam ! Combined flux in latest and established models = 0.227141 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 52 components and 0.227141 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142223Jy sigma=0.001154 ! Fit after self-cal, rms=0.142214Jy sigma=0.001154 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.9 mas, bmaj=8.234 mas, bpa=12.27 degrees ! Estimated noise=1208.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000496903 Jy ! Component: 100 - total flux cleaned = 0.00057103 Jy ! Component: 150 - total flux cleaned = 0.000615438 Jy ! Component: 200 - total flux cleaned = 0.000636582 Jy ! Total flux subtracted in 200 components = 0.000636582 Jy ! Clean residual min=-0.003720 max=0.003214 Jy/beam ! Clean residual mean=0.000057 rms=0.001162 Jy/beam ! Combined flux in latest and established models = 0.227777 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 56 components and 0.227777 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142210Jy sigma=0.001154 ! Fit after self-cal, rms=0.142207Jy sigma=0.001154 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6866 mas, bmaj=1.535 mas, bpa=0.6068 degrees ! Estimated noise=1931.56 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.184529 Jy ! Component: 100 - total flux cleaned = 0.210902 Jy ! Component: 150 - total flux cleaned = 0.218541 Jy ! Component: 200 - total flux cleaned = 0.221676 Jy ! Total flux subtracted in 200 components = 0.221676 Jy ! Clean residual min=-0.005209 max=0.004499 Jy/beam ! Clean residual mean=0.000002 rms=0.001405 Jy/beam ! Combined flux in latest and established models = 0.221676 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.221676 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9489 mas, bmaj=2.139 mas, bpa=-2.032 degrees ! Estimated noise=983.557 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00449905 Jy ! Component: 100 - total flux cleaned = 0.00565009 Jy ! Component: 150 - total flux cleaned = 0.0057705 Jy ! Component: 200 - total flux cleaned = 0.00592188 Jy ! Total flux subtracted in 200 components = 0.00592188 Jy ! Clean residual min=-0.003247 max=0.003769 Jy/beam ! Clean residual mean=0.000033 rms=0.000919 Jy/beam ! Combined flux in latest and established models = 0.227598 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 34 components and 0.227598 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.9 mas, bmaj=8.234 mas, bpa=12.27 degrees ! Estimated noise=1208.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00029924 Jy ! Component: 100 - total flux cleaned = 0.000372531 Jy ! Component: 150 - total flux cleaned = 0.000395304 Jy ! Component: 200 - total flux cleaned = 0.00041726 Jy ! Total flux subtracted in 200 components = 0.00041726 Jy ! Clean residual min=-0.003755 max=0.003244 Jy/beam ! Clean residual mean=0.000057 rms=0.001167 Jy/beam ! Combined flux in latest and established models = 0.228015 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 42 components and 0.228015 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9489 mas, bmaj=2.139 mas, bpa=-2.032 degrees ! Estimated noise=983.557 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000265158 Jy ! Component: 100 - total flux cleaned = -0.000341458 Jy ! Component: 150 - total flux cleaned = -0.000305836 Jy ! Component: 200 - total flux cleaned = -0.000338268 Jy ! Total flux subtracted in 200 components = -0.000338268 Jy ! Clean residual min=-0.003214 max=0.003691 Jy/beam ! Clean residual mean=0.000033 rms=0.000905 Jy/beam ! Combined flux in latest and established models = 0.227677 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 46 components and 0.227677 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142207Jy sigma=0.001154 ! Fit after self-cal, rms=0.142208Jy sigma=0.001154 wmodel J1154-3242_X_2002_01_31_yyk\_map.mod ! Writing 46 model components to file: J1154-3242_X_2002_01_31_yyk_map.mod wobs J1154-3242_X_2002_01_31_yyk\_uvs.fits ! Applying 71 buffered edits. ! Writing UV FITS file: J1154-3242_X_2002_01_31_yyk_uvs.fits wwins J1154-3242_X_2002_01_31_yyk\_map.win ! wwins: Wrote 2 windows to J1154-3242_X_2002_01_31_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000869421 Jy ! Component: 100 - total flux cleaned = 0.00103248 Jy ! Component: 150 - total flux cleaned = 0.00113101 Jy ! Component: 200 - total flux cleaned = 0.00144169 Jy ! Component: 250 - total flux cleaned = 0.00152628 Jy ! Component: 300 - total flux cleaned = 0.00152678 Jy ! Component: 350 - total flux cleaned = 0.00156432 Jy ! Component: 400 - total flux cleaned = 0.00177976 Jy ! Component: 450 - total flux cleaned = 0.00202407 Jy ! Component: 500 - total flux cleaned = 0.00232731 Jy ! Component: 550 - total flux cleaned = 0.00245704 Jy ! Component: 600 - total flux cleaned = 0.00255221 Jy ! Component: 650 - total flux cleaned = 0.00261397 Jy ! Component: 700 - total flux cleaned = 0.002734 Jy ! Component: 750 - total flux cleaned = 0.00287981 Jy ! Component: 800 - total flux cleaned = 0.00296546 Jy ! Component: 850 - total flux cleaned = 0.00307803 Jy ! Component: 900 - total flux cleaned = 0.00321453 Jy ! Component: 950 - total flux cleaned = 0.00329463 Jy ! Component: 1000 - total flux cleaned = 0.00350372 Jy ! Component: 1050 - total flux cleaned = 0.00365706 Jy ! Component: 1100 - total flux cleaned = 0.00385797 Jy ! Component: 1150 - total flux cleaned = 0.00408002 Jy ! Component: 1200 - total flux cleaned = 0.00425072 Jy ! Component: 1250 - total flux cleaned = 0.00448973 Jy ! Component: 1300 - total flux cleaned = 0.00470201 Jy ! Component: 1350 - total flux cleaned = 0.00498028 Jy ! Component: 1400 - total flux cleaned = 0.00523104 Jy ! Component: 1450 - total flux cleaned = 0.00541048 Jy ! Component: 1500 - total flux cleaned = 0.00563191 Jy ! Component: 1550 - total flux cleaned = 0.0058495 Jy ! Component: 1600 - total flux cleaned = 0.00602088 Jy ! Component: 1650 - total flux cleaned = 0.00621125 Jy ! Component: 1700 - total flux cleaned = 0.00633636 Jy ! Component: 1750 - total flux cleaned = 0.00648042 Jy ! Component: 1800 - total flux cleaned = 0.00660229 Jy ! Component: 1850 - total flux cleaned = 0.00674252 Jy ! Component: 1900 - total flux cleaned = 0.00688091 Jy ! Component: 1950 - total flux cleaned = 0.00695917 Jy ! Component: 2000 - total flux cleaned = 0.00707495 Jy ! Total flux subtracted in 2048 components = 0.00718939 Jy ! Clean residual min=-0.001199 max=0.001102 Jy/beam ! Clean residual mean=0.000020 rms=0.000363 Jy/beam ! Combined flux in latest and established models = 0.234866 Jy keep ! Adding 128 model components to the UV plane model. ! The established model now contains 174 components and 0.234866 Jy ![Exited script file: muppet] wmap "J1154-3242_X_2002_01_31_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9489 x 2.139 at -2.032 degrees (North through East) ! Clean map min=-0.0016372 max=0.21553 Jy/beam ! Writing clean map to FITS file: J1154-3242_X_2002_01_31_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.21553 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000362994 device "J1154-3242_X_2002_01_31_yyk\_map.eps/VPS" ! Attempting to open device: 'J1154-3242_X_2002_01_31_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.505258 0.505258 1.01052 2.02103 4.04207 8.08413 16.1683 32.3365 64.673 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.215 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9489 x 2.139 at -2.032 degrees (North through East) ! Clean map min=-0.0016372 max=0.21553 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1154-3242_X_2002_01_31_yyk\_map.gif/gif" ! Attempting to open device: 'J1154-3242_X_2002_01_31_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1154-3242_X_2002_01_31_yyk_uvs.log closed on Wed Jun 27 10:56:39 2007