! Started logfile: J1127-1857_X_2002_01_31_yyk_uvs.log on Wed Jun 27 10:56:08 2007 obs J1127-1857_X_2002_01_31_yyk_uva.fits ! Reading UV FITS file: J1127-1857_X_2002_01_31_yyk_uva.fits ! AN table 1: 31 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.49319 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1127-1857 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40947e+09 8e+06 1 8e+06 ! 02 2 8.47947e+09 8e+06 1 8e+06 ! 03 3 8.79447e+09 8e+06 1 8e+06 ! 04 4 8.89947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1544 lines of history. ! ! Reading 2752 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 flag NL ! Flagging baselines of antenna 1:NL in the currently selected channels. ![@muppet J1127-1857_X_2002_01_31_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.854989 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.913 mas, bmaj=4.181 mas, bpa=-20.53 degrees ! Estimated noise=1930.91 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.723481 Jy ! Component: 100 - total flux cleaned = 0.810754 Jy ! Total flux subtracted in 100 components = 0.810754 Jy ! Clean residual min=-0.035346 max=0.033336 Jy/beam ! Clean residual mean=0.000109 rms=0.010740 Jy/beam ! Combined flux in latest and established models = 0.810754 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.810754 Jy ! ! Correcting IF 1. ! A total of 129 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 129 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 129 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 129 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.160130Jy sigma=0.001516 ! Fit after self-cal, rms=0.160006Jy sigma=0.001515 ! Inverting map and beam ! Estimated beam: bmin=0.913 mas, bmaj=4.181 mas, bpa=-20.53 degrees ! Estimated noise=1930.91 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.037 mas, bmaj=4.369 mas, bpa=-20.22 degrees ! Estimated noise=1591.01 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00485697 Jy ! Component: 100 - total flux cleaned = 0.00268354 Jy ! Component: 150 - total flux cleaned = 0.00186484 Jy ! Component: 200 - total flux cleaned = 0.000469524 Jy ! Total flux subtracted in 200 components = 0.000469524 Jy ! Clean residual min=-0.035974 max=0.029568 Jy/beam ! Clean residual mean=0.000469 rms=0.010092 Jy/beam ! Combined flux in latest and established models = 0.811224 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 18 components and 0.811224 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150978Jy sigma=0.001422 ! Fit after self-cal, rms=0.150942Jy sigma=0.001422 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.037 x 4.369 at -20.22 degrees (North through East) ! Clean map min=-0.037049 max=0.80959 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.00369 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.94 HN 1.00* KP 1.00 ! LA 1.11 MK 0.99 NL 1.00* OV 0.96 ! PT 0.98 SC 1.00* ! ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.00999 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.93 HN 1.00* KP 0.96 ! LA 1.08 MK 0.99 NL 1.00* OV 0.93 ! PT 1.03 SC 1.00* ! ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.997449 ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.89 HN 1.00* KP 0.95 ! LA 1.09 MK 1.00 NL 1.00* OV 0.97 ! PT 1.05 SC 1.00* ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.98476 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.86 HN 1.00* KP 1.06 ! LA 1.07 MK 1.01 NL 1.00* OV 1.00 ! PT 1.12 SC 1.00* ! ! ! Fit before self-cal, rms=0.150942Jy sigma=0.001422 ! Fit after self-cal, rms=0.132292Jy sigma=0.001241 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132292Jy sigma=0.001241 ! Fit after self-cal, rms=0.132240Jy sigma=0.001241 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.054 mas, bmaj=4.238 mas, bpa=-20 degrees ! Estimated noise=1608.46 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0129184 Jy ! Component: 100 - total flux cleaned = 0.0135573 Jy ! Component: 150 - total flux cleaned = 0.0142941 Jy ! Component: 200 - total flux cleaned = 0.0148809 Jy ! Total flux subtracted in 200 components = 0.0148809 Jy ! Clean residual min=-0.007554 max=0.009251 Jy/beam ! Clean residual mean=0.000066 rms=0.003061 Jy/beam ! Combined flux in latest and established models = 0.826104 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 32 components and 0.826104 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130878Jy sigma=0.001229 ! Fit after self-cal, rms=0.130865Jy sigma=0.001229 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130865Jy sigma=0.001229 ! Fit after self-cal, rms=0.128732Jy sigma=0.001207 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000656786 Jy ! Component: 100 - total flux cleaned = 0.000656316 Jy ! Component: 150 - total flux cleaned = 0.000789658 Jy ! Component: 200 - total flux cleaned = 0.000783016 Jy ! Total flux subtracted in 200 components = 0.000783016 Jy ! Clean residual min=-0.007289 max=0.009536 Jy/beam ! Clean residual mean=0.000065 rms=0.002905 Jy/beam ! Combined flux in latest and established models = 0.826887 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 39 components and 0.826888 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128536Jy sigma=0.001205 ! Fit after self-cal, rms=0.128117Jy sigma=0.001201 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.054 x 4.238 at -20 degrees (North through East) ! Clean map min=-0.010238 max=0.81331 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128117Jy sigma=0.001201 ! Fit after self-cal, rms=0.127712Jy sigma=0.001189 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127712Jy sigma=0.001189 ! Fit after self-cal, rms=0.127631Jy sigma=0.001188 ! Inverting map and beam ! Estimated beam: bmin=1.057 mas, bmaj=4.204 mas, bpa=-19.97 degrees ! Estimated noise=1607.35 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00690693 Jy ! Component: 100 - total flux cleaned = 0.00790783 Jy ! Component: 150 - total flux cleaned = 0.00836297 Jy ! Component: 200 - total flux cleaned = 0.00875508 Jy ! Total flux subtracted in 200 components = 0.00875508 Jy ! Clean residual min=-0.006150 max=0.007118 Jy/beam ! Clean residual mean=0.000058 rms=0.002255 Jy/beam ! Combined flux in latest and established models = 0.835643 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 50 components and 0.835643 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127273Jy sigma=0.001185 ! Fit after self-cal, rms=0.127263Jy sigma=0.001185 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127263Jy sigma=0.001185 ! Fit after self-cal, rms=0.126851Jy sigma=0.001181 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126851Jy sigma=0.001181 ! Fit after self-cal, rms=0.126862Jy sigma=0.001181 ! Inverting map and beam ! Estimated beam: bmin=1.059 mas, bmaj=4.183 mas, bpa=-19.95 degrees ! Estimated noise=1607.74 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00474941 Jy ! Component: 100 - total flux cleaned = 0.00563007 Jy ! Component: 150 - total flux cleaned = 0.00594178 Jy ! Component: 200 - total flux cleaned = 0.00620165 Jy ! Total flux subtracted in 200 components = 0.00620165 Jy ! Clean residual min=-0.005485 max=0.006536 Jy/beam ! Clean residual mean=0.000050 rms=0.001975 Jy/beam ! Combined flux in latest and established models = 0.841844 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 52 components and 0.841844 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126689Jy sigma=0.001179 ! Fit after self-cal, rms=0.126698Jy sigma=0.001180 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.04 mas, bmaj=6.498 mas, bpa=18.08 degrees ! Estimated noise=1864.6 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000404309 Jy ! Component: 100 - total flux cleaned = 0.000407558 Jy ! Component: 150 - total flux cleaned = 0.000348983 Jy ! Component: 200 - total flux cleaned = 0.000293658 Jy ! Total flux subtracted in 200 components = 0.000293658 Jy ! Clean residual min=-0.006097 max=0.007032 Jy/beam ! Clean residual mean=0.000079 rms=0.002412 Jy/beam ! Combined flux in latest and established models = 0.842138 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 59 components and 0.842138 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126680Jy sigma=0.001179 ! Fit after self-cal, rms=0.126687Jy sigma=0.001179 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9101 mas, bmaj=4.137 mas, bpa=-20.37 degrees ! Estimated noise=1953.8 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.724648 Jy ! Component: 100 - total flux cleaned = 0.82449 Jy ! Component: 150 - total flux cleaned = 0.843817 Jy ! Component: 200 - total flux cleaned = 0.844377 Jy ! Total flux subtracted in 200 components = 0.844377 Jy ! Clean residual min=-0.007220 max=0.007752 Jy/beam ! Clean residual mean=0.000017 rms=0.002470 Jy/beam ! Combined flux in latest and established models = 0.844377 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.844377 Jy ! Inverting map and beam ! Estimated beam: bmin=1.059 mas, bmaj=4.183 mas, bpa=-19.95 degrees ! Estimated noise=1607.74 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00125911 Jy ! Component: 100 - total flux cleaned = 0.00127189 Jy ! Component: 150 - total flux cleaned = 0.0014448 Jy ! Component: 200 - total flux cleaned = 0.00100139 Jy ! Total flux subtracted in 200 components = 0.00100139 Jy ! Clean residual min=-0.006073 max=0.006841 Jy/beam ! Clean residual mean=0.000069 rms=0.002217 Jy/beam ! Combined flux in latest and established models = 0.845378 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 28 components and 0.845378 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.04 mas, bmaj=6.498 mas, bpa=18.08 degrees ! Estimated noise=1864.6 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000249861 Jy ! Component: 100 - total flux cleaned = 0.000165895 Jy ! Component: 150 - total flux cleaned = 8.85817e-05 Jy ! Component: 200 - total flux cleaned = -0.000129097 Jy ! Total flux subtracted in 200 components = -0.000129097 Jy ! Clean residual min=-0.006641 max=0.007359 Jy/beam ! Clean residual mean=0.000104 rms=0.002594 Jy/beam ! Combined flux in latest and established models = 0.845249 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 40 components and 0.845249 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.059 mas, bmaj=4.183 mas, bpa=-19.95 degrees ! Estimated noise=1607.74 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000911891 Jy ! Component: 100 - total flux cleaned = -0.00110748 Jy ! Component: 150 - total flux cleaned = -0.00146822 Jy ! Component: 200 - total flux cleaned = -0.00163266 Jy ! Total flux subtracted in 200 components = -0.00163266 Jy ! Clean residual min=-0.005944 max=0.006356 Jy/beam ! Clean residual mean=0.000060 rms=0.002045 Jy/beam ! Combined flux in latest and established models = 0.843617 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 49 components and 0.843617 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126876Jy sigma=0.001181 ! Fit after self-cal, rms=0.126870Jy sigma=0.001181 wmodel J1127-1857_X_2002_01_31_yyk\_map.mod ! Writing 49 model components to file: J1127-1857_X_2002_01_31_yyk_map.mod wobs J1127-1857_X_2002_01_31_yyk\_uvs.fits ! Applying 31 buffered edits. ! Writing UV FITS file: J1127-1857_X_2002_01_31_yyk_uvs.fits wwins J1127-1857_X_2002_01_31_yyk\_map.win ! wwins: Wrote 1 windows to J1127-1857_X_2002_01_31_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00174491 Jy ! Component: 100 - total flux cleaned = 0.00243147 Jy ! Component: 150 - total flux cleaned = 0.0029608 Jy ! Component: 200 - total flux cleaned = 0.00329264 Jy ! Component: 250 - total flux cleaned = 0.00351981 Jy ! Component: 300 - total flux cleaned = 0.00358866 Jy ! Component: 350 - total flux cleaned = 0.00365623 Jy ! Component: 400 - total flux cleaned = 0.00359599 Jy ! Component: 450 - total flux cleaned = 0.00377337 Jy ! Component: 500 - total flux cleaned = 0.00394144 Jy ! Component: 550 - total flux cleaned = 0.00410001 Jy ! Component: 600 - total flux cleaned = 0.0041512 Jy ! Component: 650 - total flux cleaned = 0.00434696 Jy ! Component: 700 - total flux cleaned = 0.00439347 Jy ! Component: 750 - total flux cleaned = 0.00466133 Jy ! Component: 800 - total flux cleaned = 0.00478885 Jy ! Component: 850 - total flux cleaned = 0.00495428 Jy ! Component: 900 - total flux cleaned = 0.00511465 Jy ! Component: 950 - total flux cleaned = 0.00526873 Jy ! Component: 1000 - total flux cleaned = 0.00545543 Jy ! Component: 1050 - total flux cleaned = 0.00563597 Jy ! Component: 1100 - total flux cleaned = 0.00587999 Jy ! Component: 1150 - total flux cleaned = 0.00604911 Jy ! Component: 1200 - total flux cleaned = 0.00630958 Jy ! Component: 1250 - total flux cleaned = 0.00672007 Jy ! Component: 1300 - total flux cleaned = 0.00708903 Jy ! Component: 1350 - total flux cleaned = 0.00744773 Jy ! Component: 1400 - total flux cleaned = 0.0078559 Jy ! Component: 1450 - total flux cleaned = 0.00816901 Jy ! Component: 1500 - total flux cleaned = 0.00828073 Jy ! Component: 1550 - total flux cleaned = 0.00841902 Jy ! Component: 1600 - total flux cleaned = 0.008555 Jy ! Component: 1650 - total flux cleaned = 0.00868918 Jy ! Component: 1700 - total flux cleaned = 0.00876878 Jy ! Component: 1750 - total flux cleaned = 0.00887407 Jy ! Component: 1800 - total flux cleaned = 0.00895186 Jy ! Component: 1850 - total flux cleaned = 0.0089772 Jy ! Component: 1900 - total flux cleaned = 0.00910452 Jy ! Component: 1950 - total flux cleaned = 0.00923044 Jy ! Component: 2000 - total flux cleaned = 0.00925538 Jy ! Total flux subtracted in 2048 components = 0.00928033 Jy ! Clean residual min=-0.001484 max=0.001522 Jy/beam ! Clean residual mean=0.000012 rms=0.000492 Jy/beam ! Combined flux in latest and established models = 0.852897 Jy keep ! Adding 121 model components to the UV plane model. ! The established model now contains 170 components and 0.852897 Jy ![Exited script file: muppet] wmap "J1127-1857_X_2002_01_31_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.059 x 4.183 at -19.95 degrees (North through East) ! Clean map min=-0.0034064 max=0.83232 Jy/beam ! Writing clean map to FITS file: J1127-1857_X_2002_01_31_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.832325 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000489816 device "J1127-1857_X_2002_01_31_yyk\_map.eps/VPS" ! Attempting to open device: 'J1127-1857_X_2002_01_31_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.176547 0.176547 0.353095 0.70619 1.41238 2.82476 5.64952 11.299 22.5981 45.1961 90.3923 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.832 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.059 x 4.183 at -19.95 degrees (North through East) ! Clean map min=-0.0034064 max=0.83232 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1127-1857_X_2002_01_31_yyk\_map.gif/gif" ! Attempting to open device: 'J1127-1857_X_2002_01_31_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1127-1857_X_2002_01_31_yyk_uvs.log closed on Wed Jun 27 10:56:14 2007