! Started logfile: J1127-1857_S_2002_05_14_yyk_uvs.log on Tue Jun 26 22:41:39 2007 obs J1127-1857_S_2002_05_14_yyk_uva.fits ! Reading UV FITS file: J1127-1857_S_2002_05_14_yyk_uva.fits ! AN table 1: 26 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.798291 visibilities/baseline/integration-bin. ! Found source: J1127-1857 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22947e+09 8e+06 1 8e+06 ! 02 2 2.25947e+09 8e+06 1 8e+06 ! 03 3 2.34947e+09 8e+06 1 8e+06 ! 04 4 2.36947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1153 lines of history. ! ! Reading 3736 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1127-1857_S_2002_05_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.867835 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.567 mas, bmaj=6.928 mas, bpa=-2.036 degrees ! Estimated noise=2077.42 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.727818 Jy ! Component: 100 - total flux cleaned = 0.833077 Jy ! Total flux subtracted in 100 components = 0.833077 Jy ! Clean residual min=-0.023750 max=0.027513 Jy/beam ! Clean residual mean=0.000151 rms=0.006982 Jy/beam ! Combined flux in latest and established models = 0.833077 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.833077 Jy ! ! Correcting IF 1. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 55 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.196819Jy sigma=0.001346 ! Fit after self-cal, rms=0.196512Jy sigma=0.001344 ! Inverting map and beam ! Estimated beam: bmin=2.567 mas, bmaj=6.928 mas, bpa=-2.036 degrees ! Estimated noise=2077.42 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.899 mas, bmaj=7.862 mas, bpa=-1.638 degrees ! Estimated noise=1657.14 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0338579 Jy ! Component: 100 - total flux cleaned = 0.046714 Jy ! Component: 150 - total flux cleaned = 0.0516253 Jy ! Component: 200 - total flux cleaned = 0.0516368 Jy ! Total flux subtracted in 200 components = 0.0516368 Jy ! Clean residual min=-0.015349 max=0.016230 Jy/beam ! Clean residual mean=0.000112 rms=0.004386 Jy/beam ! Combined flux in latest and established models = 0.884714 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 32 components and 0.884714 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.191380Jy sigma=0.001316 ! Fit after self-cal, rms=0.191380Jy sigma=0.001316 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.899 x 7.862 at -1.638 degrees (North through East) ! Clean map min=-0.014541 max=0.83203 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.01395 ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.14 HN 0.92 KP 0.96 ! LA 0.98 NL 0.89 OV 1.01 PT 1.06 ! SC 1.07 MK 0.97 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.998616 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.04 HN 0.98 KP 1.00* ! LA 0.97 NL 1.00 OV 1.01 PT 0.99 ! SC 1.01 MK 1.07 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.96162 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.98 HN 1.04 KP 1.00 ! LA 1.01 NL 1.05 OV 1.10 PT 1.18 ! SC 1.00 MK 1.02 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.02439 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.91 HN 0.99 KP 1.08 ! LA 0.85 NL 1.03 OV 0.92 PT 1.01 ! SC 0.98 MK 1.00 ! ! ! Fit before self-cal, rms=0.191380Jy sigma=0.001316 ! Fit after self-cal, rms=0.175089Jy sigma=0.001220 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.175089Jy sigma=0.001220 ! Fit after self-cal, rms=0.175083Jy sigma=0.001220 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.928 mas, bmaj=7.889 mas, bpa=-1.622 degrees ! Estimated noise=1657.19 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000330993 Jy ! Component: 100 - total flux cleaned = 0.000388593 Jy ! Component: 150 - total flux cleaned = 0.000542235 Jy ! Component: 200 - total flux cleaned = 0.000630017 Jy ! Total flux subtracted in 200 components = 0.000630017 Jy ! Clean residual min=-0.006971 max=0.007508 Jy/beam ! Clean residual mean=0.000028 rms=0.001949 Jy/beam ! Combined flux in latest and established models = 0.885344 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 40 components and 0.885344 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.175051Jy sigma=0.001220 ! Fit after self-cal, rms=0.175050Jy sigma=0.001220 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.175050Jy sigma=0.001220 ! Fit after self-cal, rms=0.172842Jy sigma=0.001205 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000281162 Jy ! Component: 100 - total flux cleaned = 0.000394421 Jy ! Component: 150 - total flux cleaned = 0.000351692 Jy ! Component: 200 - total flux cleaned = 0.000309849 Jy ! Total flux subtracted in 200 components = 0.000309849 Jy ! Clean residual min=-0.007000 max=0.007394 Jy/beam ! Clean residual mean=0.000028 rms=0.001909 Jy/beam ! Combined flux in latest and established models = 0.885654 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 54 components and 0.885654 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172819Jy sigma=0.001204 ! Fit after self-cal, rms=0.172336Jy sigma=0.001201 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.928 x 7.889 at -1.622 degrees (North through East) ! Clean map min=-0.006504 max=0.83386 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172336Jy sigma=0.001201 ! Fit after self-cal, rms=0.168219Jy sigma=0.001166 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168219Jy sigma=0.001166 ! Fit after self-cal, rms=0.168104Jy sigma=0.001165 ! Inverting map and beam ! Estimated beam: bmin=2.937 mas, bmaj=7.907 mas, bpa=-1.573 degrees ! Estimated noise=1656.29 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00145318 Jy ! Component: 100 - total flux cleaned = -0.00145613 Jy ! Component: 150 - total flux cleaned = -0.0014558 Jy ! Component: 200 - total flux cleaned = -0.00145185 Jy ! Total flux subtracted in 200 components = -0.00145185 Jy ! Clean residual min=-0.006206 max=0.006705 Jy/beam ! Clean residual mean=0.000003 rms=0.001751 Jy/beam ! Combined flux in latest and established models = 0.884202 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 62 components and 0.884202 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168081Jy sigma=0.001164 ! Fit after self-cal, rms=0.168059Jy sigma=0.001164 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168059Jy sigma=0.001164 ! Fit after self-cal, rms=0.167838Jy sigma=0.001161 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167838Jy sigma=0.001161 ! Fit after self-cal, rms=0.167841Jy sigma=0.001161 ! Inverting map and beam ! Estimated beam: bmin=2.944 mas, bmaj=7.923 mas, bpa=-1.549 degrees ! Estimated noise=1656.78 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00133139 Jy ! Component: 100 - total flux cleaned = -0.00152034 Jy ! Component: 150 - total flux cleaned = -0.00163739 Jy ! Component: 200 - total flux cleaned = -0.00170573 Jy ! Total flux subtracted in 200 components = -0.00170573 Jy ! Clean residual min=-0.006063 max=0.006656 Jy/beam ! Clean residual mean=0.000004 rms=0.001730 Jy/beam ! Combined flux in latest and established models = 0.882496 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 75 components and 0.882496 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167823Jy sigma=0.001161 ! Fit after self-cal, rms=0.167831Jy sigma=0.001161 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.173 mas, bmaj=16.56 mas, bpa=4.04 degrees ! Estimated noise=2165.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00170338 Jy ! Component: 100 - total flux cleaned = -0.00188942 Jy ! Component: 150 - total flux cleaned = -0.00205561 Jy ! Component: 200 - total flux cleaned = -0.00220507 Jy ! Total flux subtracted in 200 components = -0.00220507 Jy ! Clean residual min=-0.006669 max=0.008495 Jy/beam ! Clean residual mean=0.000003 rms=0.002222 Jy/beam ! Combined flux in latest and established models = 0.880291 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 77 components and 0.880291 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167845Jy sigma=0.001161 ! Fit after self-cal, rms=0.167850Jy sigma=0.001161 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.582 mas, bmaj=6.948 mas, bpa=-2.057 degrees ! Estimated noise=2065.99 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.722714 Jy ! Component: 100 - total flux cleaned = 0.823358 Jy ! Component: 150 - total flux cleaned = 0.856595 Jy ! Component: 200 - total flux cleaned = 0.871332 Jy ! Total flux subtracted in 200 components = 0.871332 Jy ! Clean residual min=-0.007414 max=0.008069 Jy/beam ! Clean residual mean=-0.000010 rms=0.002179 Jy/beam ! Combined flux in latest and established models = 0.871332 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 36 model components to the UV plane model. ! The established model now contains 36 components and 0.871332 Jy ! Inverting map and beam ! Estimated beam: bmin=2.944 mas, bmaj=7.923 mas, bpa=-1.549 degrees ! Estimated noise=1656.78 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00767993 Jy ! Component: 100 - total flux cleaned = 0.0105179 Jy ! Component: 150 - total flux cleaned = 0.0110866 Jy ! Component: 200 - total flux cleaned = 0.0112191 Jy ! Total flux subtracted in 200 components = 0.0112191 Jy ! Clean residual min=-0.005985 max=0.006690 Jy/beam ! Clean residual mean=0.000003 rms=0.001749 Jy/beam ! Combined flux in latest and established models = 0.882551 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 49 components and 0.882551 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.173 mas, bmaj=16.56 mas, bpa=4.04 degrees ! Estimated noise=2165.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00186852 Jy ! Component: 100 - total flux cleaned = -0.00206282 Jy ! Component: 150 - total flux cleaned = -0.00223737 Jy ! Component: 200 - total flux cleaned = -0.002451 Jy ! Total flux subtracted in 200 components = -0.002451 Jy ! Clean residual min=-0.006692 max=0.008524 Jy/beam ! Clean residual mean=0.000003 rms=0.002218 Jy/beam ! Combined flux in latest and established models = 0.8801 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 55 components and 0.8801 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.944 mas, bmaj=7.923 mas, bpa=-1.549 degrees ! Estimated noise=1656.78 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110737 Jy ! Component: 100 - total flux cleaned = 0.001277 Jy ! Component: 150 - total flux cleaned = 0.00137371 Jy ! Component: 200 - total flux cleaned = 0.00141894 Jy ! Total flux subtracted in 200 components = 0.00141894 Jy ! Clean residual min=-0.005747 max=0.006588 Jy/beam ! Clean residual mean=0.000004 rms=0.001733 Jy/beam ! Combined flux in latest and established models = 0.881519 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 66 components and 0.881519 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167869Jy sigma=0.001161 ! Fit after self-cal, rms=0.167871Jy sigma=0.001161 wmodel J1127-1857_S_2002_05_14_yyk\_map.mod ! Writing 66 model components to file: J1127-1857_S_2002_05_14_yyk_map.mod wobs J1127-1857_S_2002_05_14_yyk\_uvs.fits ! Writing UV FITS file: J1127-1857_S_2002_05_14_yyk_uvs.fits wwins J1127-1857_S_2002_05_14_yyk\_map.win ! wwins: Wrote 1 windows to J1127-1857_S_2002_05_14_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0015166 Jy ! Component: 100 - total flux cleaned = 0.00172207 Jy ! Component: 150 - total flux cleaned = 0.00210097 Jy ! Component: 200 - total flux cleaned = 0.00255108 Jy ! Component: 250 - total flux cleaned = 0.00289259 Jy ! Component: 300 - total flux cleaned = 0.00330088 Jy ! Component: 350 - total flux cleaned = 0.00353502 Jy ! Component: 400 - total flux cleaned = 0.00391243 Jy ! Component: 450 - total flux cleaned = 0.0042049 Jy ! Component: 500 - total flux cleaned = 0.00455974 Jy ! Component: 550 - total flux cleaned = 0.00476678 Jy ! Component: 600 - total flux cleaned = 0.00496611 Jy ! Component: 650 - total flux cleaned = 0.00515936 Jy ! Component: 700 - total flux cleaned = 0.00528484 Jy ! Component: 750 - total flux cleaned = 0.00540814 Jy ! Component: 800 - total flux cleaned = 0.00552684 Jy ! Component: 850 - total flux cleaned = 0.00569967 Jy ! Component: 900 - total flux cleaned = 0.00587023 Jy ! Component: 950 - total flux cleaned = 0.00609206 Jy ! Component: 1000 - total flux cleaned = 0.00614668 Jy ! Component: 1050 - total flux cleaned = 0.00625446 Jy ! Component: 1100 - total flux cleaned = 0.00651292 Jy ! Component: 1150 - total flux cleaned = 0.00661405 Jy ! Component: 1200 - total flux cleaned = 0.00681289 Jy ! Component: 1250 - total flux cleaned = 0.00695979 Jy ! Component: 1300 - total flux cleaned = 0.0072004 Jy ! Component: 1350 - total flux cleaned = 0.00748218 Jy ! Component: 1400 - total flux cleaned = 0.00757426 Jy ! Component: 1450 - total flux cleaned = 0.00789173 Jy ! Component: 1500 - total flux cleaned = 0.0079372 Jy ! Component: 1550 - total flux cleaned = 0.00811401 Jy ! Component: 1600 - total flux cleaned = 0.00832941 Jy ! Component: 1650 - total flux cleaned = 0.00849906 Jy ! Component: 1700 - total flux cleaned = 0.00858152 Jy ! Component: 1750 - total flux cleaned = 0.0084997 Jy ! Component: 1800 - total flux cleaned = 0.00858126 Jy ! Component: 1850 - total flux cleaned = 0.0086218 Jy ! Component: 1900 - total flux cleaned = 0.00873991 Jy ! Component: 1950 - total flux cleaned = 0.00877891 Jy ! Component: 2000 - total flux cleaned = 0.0089319 Jy ! Total flux subtracted in 2048 components = 0.00896944 Jy ! Clean residual min=-0.002110 max=0.002181 Jy/beam ! Clean residual mean=-0.000026 rms=0.000763 Jy/beam ! Combined flux in latest and established models = 0.890488 Jy keep ! Adding 131 model components to the UV plane model. ! The established model now contains 197 components and 0.890488 Jy ![Exited script file: muppet] wmap "J1127-1857_S_2002_05_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.944 x 7.923 at -1.549 degrees (North through East) ! Clean map min=-0.0039934 max=0.83589 Jy/beam ! Writing clean map to FITS file: J1127-1857_S_2002_05_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.835885 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000763809 device "J1127-1857_S_2002_05_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J1127-1857_S_2002_05_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.274132 0.274132 0.548263 1.09653 2.19305 4.38611 8.77221 17.5444 35.0889 70.1777 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0022 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.835 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.944 x 7.923 at -1.549 degrees (North through East) ! Clean map min=-0.0039934 max=0.83589 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1127-1857_S_2002_05_14_yyk\_map.gif/gif" ! Attempting to open device: 'J1127-1857_S_2002_05_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1127-1857_S_2002_05_14_yyk_uvs.log closed on Tue Jun 26 22:41:45 2007