! Started logfile: J1103-3251_X_2002_01_31_yyk_uvs.log on Wed Jun 27 10:55:47 2007 obs J1103-3251_X_2002_01_31_yyk_uva.fits ! Reading UV FITS file: J1103-3251_X_2002_01_31_yyk_uva.fits ! AN table 1: 73 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.760122 visibilities/baseline/integration-bin. ! Found source: J1103-3251 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40947e+09 8e+06 1 8e+06 ! 02 2 8.47947e+09 8e+06 1 8e+06 ! 03 3 8.79447e+09 8e+06 1 8e+06 ! 04 4 8.89947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1544 lines of history. ! ! Reading 9988 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 flag NL ! Flagging baselines of antenna 1:NL in the currently selected channels. ![@muppet J1103-3251_X_2002_01_31_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.314916 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6518 mas, bmaj=1.577 mas, bpa=3.851 degrees ! Estimated noise=1644.39 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.226184 Jy ! Component: 100 - total flux cleaned = 0.272132 Jy ! Total flux subtracted in 100 components = 0.272132 Jy ! Clean residual min=-0.012950 max=0.016347 Jy/beam ! Clean residual mean=0.000015 rms=0.003283 Jy/beam ! Combined flux in latest and established models = 0.272132 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.272132 Jy ! ! Correcting IF 1. ! A total of 166 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 166 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 166 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 166 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.159153Jy sigma=0.001263 ! Fit after self-cal, rms=0.158989Jy sigma=0.001262 ! Inverting map and beam ! Estimated beam: bmin=0.6518 mas, bmaj=1.577 mas, bpa=3.851 degrees ! Estimated noise=1644.68 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8586 mas, bmaj=2.133 mas, bpa=1.883 degrees ! Estimated noise=946.966 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0179343 Jy ! Component: 100 - total flux cleaned = 0.0215531 Jy ! Component: 150 - total flux cleaned = 0.0216826 Jy ! Component: 200 - total flux cleaned = 0.0216734 Jy ! Total flux subtracted in 200 components = 0.0216734 Jy ! Clean residual min=-0.009771 max=0.009869 Jy/beam ! Clean residual mean=0.000041 rms=0.002836 Jy/beam ! Combined flux in latest and established models = 0.293805 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 15 components and 0.293805 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157631Jy sigma=0.001250 ! Fit after self-cal, rms=0.157625Jy sigma=0.001250 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8586 x 2.133 at 1.883 degrees (North through East) ! Clean map min=-0.0094159 max=0.27001 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00685 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.91 HN 1.00* KP 1.02 ! LA 1.12 MK 1.00 NL 1.00* OV 0.95 ! PT 1.01 SC 0.97 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.01762 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.92 HN 1.00* KP 0.95 ! LA 1.12 MK 0.96 NL 1.00* OV 0.91 ! PT 1.02 SC 0.97 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.989265 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.87 HN 1.00* KP 0.99 ! LA 1.14 MK 1.02 NL 1.00* OV 0.93 ! PT 1.07 SC 1.07 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.981152 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.87 HN 1.00* KP 1.06 ! LA 1.15 MK 1.00 NL 1.00* OV 0.96 ! PT 1.13 SC 1.02 ! ! ! Fit before self-cal, rms=0.157625Jy sigma=0.001250 ! Fit after self-cal, rms=0.154885Jy sigma=0.001229 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154885Jy sigma=0.001229 ! Fit after self-cal, rms=0.154886Jy sigma=0.001229 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8585 mas, bmaj=2.139 mas, bpa=1.882 degrees ! Estimated noise=940.824 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000326282 Jy ! Component: 100 - total flux cleaned = 0.000330364 Jy ! Component: 150 - total flux cleaned = 0.000330255 Jy ! Component: 200 - total flux cleaned = 0.000329989 Jy ! Total flux subtracted in 200 components = 0.000329989 Jy ! Clean residual min=-0.003796 max=0.004018 Jy/beam ! Clean residual mean=0.000048 rms=0.001074 Jy/beam ! Combined flux in latest and established models = 0.294135 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 6 model components to the UV plane model. ! The established model now contains 19 components and 0.294135 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154872Jy sigma=0.001229 ! Fit after self-cal, rms=0.154869Jy sigma=0.001229 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154869Jy sigma=0.001229 ! Fit after self-cal, rms=0.149053Jy sigma=0.001189 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00042423 Jy ! Component: 100 - total flux cleaned = 0.000222886 Jy ! Component: 150 - total flux cleaned = 7.60613e-05 Jy ! Component: 200 - total flux cleaned = 1.37648e-05 Jy ! Total flux subtracted in 200 components = 1.37648e-05 Jy ! Clean residual min=-0.003839 max=0.003942 Jy/beam ! Clean residual mean=0.000047 rms=0.001066 Jy/beam ! Combined flux in latest and established models = 0.294149 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 25 components and 0.294149 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148941Jy sigma=0.001188 ! Fit after self-cal, rms=0.148097Jy sigma=0.001182 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8585 x 2.139 at 1.882 degrees (North through East) ! Clean map min=-0.0035836 max=0.27358 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148097Jy sigma=0.001182 ! Fit after self-cal, rms=0.147986Jy sigma=0.001178 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147986Jy sigma=0.001178 ! Fit after self-cal, rms=0.147773Jy sigma=0.001177 ! Inverting map and beam ! Estimated beam: bmin=0.8523 mas, bmaj=2.122 mas, bpa=2.597 degrees ! Estimated noise=936.73 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 8.39629e-05 Jy ! Component: 100 - total flux cleaned = 0.000128773 Jy ! Component: 150 - total flux cleaned = 0.000130907 Jy ! Component: 200 - total flux cleaned = 0.000145503 Jy ! Total flux subtracted in 200 components = 0.000145503 Jy ! Clean residual min=-0.003284 max=0.003436 Jy/beam ! Clean residual mean=0.000036 rms=0.000939 Jy/beam ! Combined flux in latest and established models = 0.294294 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 29 components and 0.294294 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147769Jy sigma=0.001177 ! Fit after self-cal, rms=0.147683Jy sigma=0.001176 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147683Jy sigma=0.001176 ! Fit after self-cal, rms=0.147682Jy sigma=0.001173 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147682Jy sigma=0.001173 ! Fit after self-cal, rms=0.147652Jy sigma=0.001173 ! Inverting map and beam ! Estimated beam: bmin=0.8518 mas, bmaj=2.122 mas, bpa=2.689 degrees ! Estimated noise=937.667 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000484848 Jy ! Component: 100 - total flux cleaned = 0.000523596 Jy ! Component: 150 - total flux cleaned = 0.00054043 Jy ! Component: 200 - total flux cleaned = 0.00055482 Jy ! Total flux subtracted in 200 components = 0.00055482 Jy ! Clean residual min=-0.003294 max=0.003394 Jy/beam ! Clean residual mean=0.000035 rms=0.000936 Jy/beam ! Combined flux in latest and established models = 0.294849 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 31 components and 0.294849 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147650Jy sigma=0.001173 ! Fit after self-cal, rms=0.147633Jy sigma=0.001173 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.844 mas, bmaj=8.18 mas, bpa=12.45 degrees ! Estimated noise=1201.87 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -9.20621e-05 Jy ! Component: 100 - total flux cleaned = -9.91865e-05 Jy ! Component: 150 - total flux cleaned = -0.000102327 Jy ! Component: 200 - total flux cleaned = -0.000103335 Jy ! Total flux subtracted in 200 components = -0.000103335 Jy ! Clean residual min=-0.003695 max=0.003762 Jy/beam ! Clean residual mean=0.000065 rms=0.001205 Jy/beam ! Combined flux in latest and established models = 0.294746 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 3 model components to the UV plane model. ! The established model now contains 32 components and 0.294746 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147633Jy sigma=0.001173 ! Fit after self-cal, rms=0.147618Jy sigma=0.001173 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6491 mas, bmaj=1.575 mas, bpa=4.278 degrees ! Estimated noise=1613.8 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.227563 Jy ! Component: 100 - total flux cleaned = 0.272335 Jy ! Component: 150 - total flux cleaned = 0.288194 Jy ! Component: 200 - total flux cleaned = 0.293702 Jy ! Total flux subtracted in 200 components = 0.293702 Jy ! Clean residual min=-0.006419 max=0.005068 Jy/beam ! Clean residual mean=0.000019 rms=0.001409 Jy/beam ! Combined flux in latest and established models = 0.293702 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.293702 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8518 mas, bmaj=2.122 mas, bpa=2.689 degrees ! Estimated noise=937.667 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105504 Jy ! Component: 100 - total flux cleaned = 0.00134837 Jy ! Component: 150 - total flux cleaned = 0.00143582 Jy ! Component: 200 - total flux cleaned = 0.00144646 Jy ! Total flux subtracted in 200 components = 0.00144646 Jy ! Clean residual min=-0.004266 max=0.003499 Jy/beam ! Clean residual mean=0.000035 rms=0.000979 Jy/beam ! Combined flux in latest and established models = 0.295149 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 18 components and 0.295149 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.844 mas, bmaj=8.18 mas, bpa=12.45 degrees ! Estimated noise=1201.87 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000259356 Jy ! Component: 100 - total flux cleaned = -0.000263167 Jy ! Component: 150 - total flux cleaned = -0.000266909 Jy ! Component: 200 - total flux cleaned = -0.000269877 Jy ! Total flux subtracted in 200 components = -0.000269877 Jy ! Clean residual min=-0.003598 max=0.003741 Jy/beam ! Clean residual mean=0.000065 rms=0.001210 Jy/beam ! Combined flux in latest and established models = 0.294879 Jy ! Adding 3 model components to the UV plane model. ! The established model now contains 19 components and 0.294879 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8518 mas, bmaj=2.122 mas, bpa=2.689 degrees ! Estimated noise=937.667 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000152162 Jy ! Component: 100 - total flux cleaned = 0.000151318 Jy ! Component: 150 - total flux cleaned = 0.000204868 Jy ! Component: 200 - total flux cleaned = 0.000203263 Jy ! Total flux subtracted in 200 components = 0.000203263 Jy ! Clean residual min=-0.003687 max=0.003333 Jy/beam ! Clean residual mean=0.000035 rms=0.000942 Jy/beam ! Combined flux in latest and established models = 0.295082 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 24 components and 0.295082 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147647Jy sigma=0.001173 ! Fit after self-cal, rms=0.147639Jy sigma=0.001173 wmodel J1103-3251_X_2002_01_31_yyk\_map.mod ! Writing 24 model components to file: J1103-3251_X_2002_01_31_yyk_map.mod wobs J1103-3251_X_2002_01_31_yyk\_uvs.fits ! Applying 73 buffered edits. ! Writing UV FITS file: J1103-3251_X_2002_01_31_yyk_uvs.fits wwins J1103-3251_X_2002_01_31_yyk\_map.win ! wwins: Wrote 1 windows to J1103-3251_X_2002_01_31_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000104077 Jy ! Component: 100 - total flux cleaned = 0.000611303 Jy ! Component: 150 - total flux cleaned = 0.00117515 Jy ! Component: 200 - total flux cleaned = 0.00133363 Jy ! Component: 250 - total flux cleaned = 0.00143518 Jy ! Component: 300 - total flux cleaned = 0.00158113 Jy ! Component: 350 - total flux cleaned = 0.00167418 Jy ! Component: 400 - total flux cleaned = 0.00167392 Jy ! Component: 450 - total flux cleaned = 0.00154777 Jy ! Component: 500 - total flux cleaned = 0.00138473 Jy ! Component: 550 - total flux cleaned = 0.00122643 Jy ! Component: 600 - total flux cleaned = 0.00111162 Jy ! Component: 650 - total flux cleaned = 0.000999575 Jy ! Component: 700 - total flux cleaned = 0.000707541 Jy ! Component: 750 - total flux cleaned = 0.000600873 Jy ! Component: 800 - total flux cleaned = 0.000391338 Jy ! Component: 850 - total flux cleaned = 5.09481e-05 Jy ! Component: 900 - total flux cleaned = -0.000148458 Jy ! Component: 950 - total flux cleaned = -0.00044271 Jy ! Component: 1000 - total flux cleaned = -0.000698845 Jy ! Component: 1050 - total flux cleaned = -0.00098127 Jy ! Component: 1100 - total flux cleaned = -0.00125777 Jy ! Component: 1150 - total flux cleaned = -0.00149926 Jy ! Component: 1200 - total flux cleaned = -0.00167769 Jy ! Component: 1250 - total flux cleaned = -0.00188252 Jy ! Component: 1300 - total flux cleaned = -0.00208439 Jy ! Component: 1350 - total flux cleaned = -0.00234008 Jy ! Component: 1400 - total flux cleaned = -0.00247949 Jy ! Component: 1450 - total flux cleaned = -0.00269974 Jy ! Component: 1500 - total flux cleaned = -0.00291603 Jy ! Component: 1550 - total flux cleaned = -0.00302243 Jy ! Component: 1600 - total flux cleaned = -0.00320632 Jy ! Component: 1650 - total flux cleaned = -0.00336133 Jy ! Component: 1700 - total flux cleaned = -0.00351445 Jy ! Component: 1750 - total flux cleaned = -0.00366535 Jy ! Component: 1800 - total flux cleaned = -0.00381508 Jy ! Component: 1850 - total flux cleaned = -0.0039628 Jy ! Component: 1900 - total flux cleaned = -0.00418114 Jy ! Component: 1950 - total flux cleaned = -0.00427717 Jy ! Component: 2000 - total flux cleaned = -0.00451443 Jy ! Total flux subtracted in 2048 components = -0.00465483 Jy ! Clean residual min=-0.001276 max=0.001217 Jy/beam ! Clean residual mean=0.000022 rms=0.000418 Jy/beam ! Combined flux in latest and established models = 0.290427 Jy keep ! Adding 119 model components to the UV plane model. ! The established model now contains 143 components and 0.290427 Jy ![Exited script file: muppet] wmap "J1103-3251_X_2002_01_31_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8518 x 2.122 at 2.689 degrees (North through East) ! Clean map min=-0.0030931 max=0.27234 Jy/beam ! Writing clean map to FITS file: J1103-3251_X_2002_01_31_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.272338 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000416535 device "J1103-3251_X_2002_01_31_yyk\_map.eps/VPS" ! Attempting to open device: 'J1103-3251_X_2002_01_31_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.458843 0.458843 0.917685 1.83537 3.67074 7.34148 14.683 29.3659 58.7319 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.272 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8518 x 2.122 at 2.689 degrees (North through East) ! Clean map min=-0.0030931 max=0.27234 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1103-3251_X_2002_01_31_yyk\_map.gif/gif" ! Attempting to open device: 'J1103-3251_X_2002_01_31_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1103-3251_X_2002_01_31_yyk_uvs.log closed on Wed Jun 27 10:55:53 2007