! Started logfile: J1018-3123_S_2002_01_31_yyk_uvs.log on Tue Jun 26 22:38:55 2007 obs J1018-3123_S_2002_01_31_yyk_uva.fits ! Reading UV FITS file: J1018-3123_S_2002_01_31_yyk_uva.fits ! AN table 1: 76 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.649415 visibilities/baseline/integration-bin. ! Found source: J1018-3123 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22947e+09 8e+06 1 8e+06 ! 02 2 2.25947e+09 8e+06 1 8e+06 ! 03 3 2.34947e+09 8e+06 1 8e+06 ! 04 4 2.36947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1224 lines of history. ! ! Reading 8884 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1018-3123_S_2002_01_31_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.430345 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.667 mas, bmaj=7.547 mas, bpa=-4.914 degrees ! Estimated noise=2358.1 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, -0.5). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.17521 Jy ! Component: 100 - total flux cleaned = 0.26177 Jy ! Total flux subtracted in 100 components = 0.26177 Jy ! Clean residual min=-0.034576 max=0.065930 Jy/beam ! Clean residual mean=0.000643 rms=0.013754 Jy/beam ! Combined flux in latest and established models = 0.26177 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 53 model components to the UV plane model. ! The established model now contains 53 components and 0.26177 Jy ! ! Correcting IF 1. ! A total of 157 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 280 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 150 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 205 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.315390Jy sigma=0.002200 ! Fit after self-cal, rms=0.313909Jy sigma=0.002189 ! Inverting map and beam ! Estimated beam: bmin=2.667 mas, bmaj=7.547 mas, bpa=-4.914 degrees ! Estimated noise=2358.16 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.135 mas, bmaj=11.15 mas, bpa=0.3161 degrees ! Estimated noise=1139.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.114651 Jy ! Component: 100 - total flux cleaned = 0.152767 Jy ! Component: 150 - total flux cleaned = 0.159605 Jy ! Component: 200 - total flux cleaned = 0.161301 Jy ! Total flux subtracted in 200 components = 0.161301 Jy ! Clean residual min=-0.043644 max=0.110608 Jy/beam ! Clean residual mean=0.005334 rms=0.020577 Jy/beam ! Combined flux in latest and established models = 0.423072 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 61 components and 0.423072 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.289741Jy sigma=0.001990 ! Fit after self-cal, rms=0.289525Jy sigma=0.001988 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.135 x 11.15 at 0.3161 degrees (North through East) ! Clean map min=-0.043292 max=0.17935 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.289525Jy sigma=0.001988 ! Fit after self-cal, rms=0.289525Jy sigma=0.001988 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.289525Jy sigma=0.001988 ! Fit after self-cal, rms=0.289523Jy sigma=0.001988 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.135 mas, bmaj=11.15 mas, bpa=0.3161 degrees ! Estimated noise=1139.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-10, 4.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.120927 Jy ! Component: 100 - total flux cleaned = 0.16952 Jy ! Component: 150 - total flux cleaned = 0.187066 Jy ! Component: 200 - total flux cleaned = 0.197071 Jy ! Total flux subtracted in 200 components = 0.197071 Jy ! Clean residual min=-0.025259 max=0.060335 Jy/beam ! Clean residual mean=0.004106 rms=0.012073 Jy/beam ! Combined flux in latest and established models = 0.620142 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 58 model components to the UV plane model. ! The established model now contains 117 components and 0.620143 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.249553Jy sigma=0.001708 ! Fit after self-cal, rms=0.245214Jy sigma=0.001669 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.245214Jy sigma=0.001669 ! Fit after self-cal, rms=0.244096Jy sigma=0.001661 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0383285 Jy ! Component: 100 - total flux cleaned = 0.0484269 Jy ! Component: 150 - total flux cleaned = 0.0525283 Jy ! Component: 200 - total flux cleaned = 0.053955 Jy ! Total flux subtracted in 200 components = 0.053955 Jy ! Clean residual min=-0.025749 max=0.040891 Jy/beam ! Clean residual mean=0.003765 rms=0.010600 Jy/beam ! Combined flux in latest and established models = 0.674098 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 39 model components to the UV plane model. ! The established model now contains 149 components and 0.674097 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.237630Jy sigma=0.001626 ! Fit after self-cal, rms=0.236917Jy sigma=0.001619 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.135 x 11.15 at 0.3161 degrees (North through East) ! Clean map min=-0.0255 max=0.18217 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.236917Jy sigma=0.001619 ! Fit after self-cal, rms=0.236917Jy sigma=0.001619 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.236917Jy sigma=0.001619 ! Fit after self-cal, rms=0.236855Jy sigma=0.001618 ! Inverting map and beam ! Estimated beam: bmin=4.135 mas, bmaj=11.15 mas, bpa=0.3161 degrees ! Estimated noise=1139.4 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0117134 Jy ! Component: 100 - total flux cleaned = 0.0149473 Jy ! Component: 150 - total flux cleaned = 0.0156943 Jy ! Component: 200 - total flux cleaned = 0.0166899 Jy ! Total flux subtracted in 200 components = 0.0166899 Jy ! Clean residual min=-0.025332 max=0.042065 Jy/beam ! Clean residual mean=0.003663 rms=0.010541 Jy/beam ! Combined flux in latest and established models = 0.690787 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 40 model components to the UV plane model. ! The established model now contains 174 components and 0.690787 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.234985Jy sigma=0.001609 ! Fit after self-cal, rms=0.234918Jy sigma=0.001608 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.234918Jy sigma=0.001608 ! Fit after self-cal, rms=0.234918Jy sigma=0.001608 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.234918Jy sigma=0.001608 ! Fit after self-cal, rms=0.234914Jy sigma=0.001608 ! Inverting map and beam ! Estimated beam: bmin=4.135 mas, bmaj=11.15 mas, bpa=0.3161 degrees ! Estimated noise=1139.4 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00465216 Jy ! Component: 100 - total flux cleaned = 0.00558096 Jy ! Component: 150 - total flux cleaned = 0.00557614 Jy ! Component: 200 - total flux cleaned = 0.00557395 Jy ! Total flux subtracted in 200 components = 0.00557395 Jy ! Clean residual min=-0.024881 max=0.042214 Jy/beam ! Clean residual mean=0.003626 rms=0.010537 Jy/beam ! Combined flux in latest and established models = 0.696361 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 34 model components to the UV plane model. ! The established model now contains 190 components and 0.696361 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.234128Jy sigma=0.001604 ! Fit after self-cal, rms=0.234131Jy sigma=0.001603 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.522 mas, bmaj=28.97 mas, bpa=7.235 degrees ! Estimated noise=1293.46 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00466945 Jy ! Component: 100 - total flux cleaned = 0.00561576 Jy ! Component: 150 - total flux cleaned = 0.00582123 Jy ! Component: 200 - total flux cleaned = 0.00581834 Jy ! Total flux subtracted in 200 components = 0.00581834 Jy ! Clean residual min=-0.030441 max=0.058418 Jy/beam ! Clean residual mean=0.005405 rms=0.014746 Jy/beam ! Combined flux in latest and established models = 0.70218 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 59 model components to the UV plane model. ! The established model now contains 227 components and 0.70218 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.233697Jy sigma=0.001602 ! Fit after self-cal, rms=0.233718Jy sigma=0.001602 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.667 mas, bmaj=7.547 mas, bpa=-4.914 degrees ! Estimated noise=2358.16 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.177753 Jy ! Component: 100 - total flux cleaned = 0.280999 Jy ! Component: 150 - total flux cleaned = 0.359285 Jy ! Component: 200 - total flux cleaned = 0.422305 Jy ! Total flux subtracted in 200 components = 0.422305 Jy ! Clean residual min=-0.028203 max=0.030952 Jy/beam ! Clean residual mean=0.000648 rms=0.010201 Jy/beam ! Combined flux in latest and established models = 0.422305 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 97 model components to the UV plane model. ! The established model now contains 97 components and 0.422305 Jy ! Inverting map and beam ! Estimated beam: bmin=4.135 mas, bmaj=11.15 mas, bpa=0.3161 degrees ! Estimated noise=1139.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.101728 Jy ! Component: 100 - total flux cleaned = 0.162844 Jy ! Component: 150 - total flux cleaned = 0.20175 Jy ! Component: 200 - total flux cleaned = 0.226813 Jy ! Total flux subtracted in 200 components = 0.226813 Jy ! Clean residual min=-0.027228 max=0.041294 Jy/beam ! Clean residual mean=0.003929 rms=0.010376 Jy/beam ! Combined flux in latest and established models = 0.649118 Jy ! Adding 79 model components to the UV plane model. ! The established model now contains 156 components and 0.649118 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.522 mas, bmaj=28.97 mas, bpa=7.235 degrees ! Estimated noise=1293.46 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0245339 Jy ! Component: 100 - total flux cleaned = 0.0379428 Jy ! Component: 150 - total flux cleaned = 0.0427201 Jy ! Component: 200 - total flux cleaned = 0.043261 Jy ! Total flux subtracted in 200 components = 0.043261 Jy ! Clean residual min=-0.030753 max=0.059344 Jy/beam ! Clean residual mean=0.005507 rms=0.014680 Jy/beam ! Combined flux in latest and established models = 0.692379 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 179 components and 0.692379 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.135 mas, bmaj=11.15 mas, bpa=0.3161 degrees ! Estimated noise=1139.4 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00220081 Jy ! Component: 100 - total flux cleaned = -0.00274111 Jy ! Component: 150 - total flux cleaned = -0.00274608 Jy ! Component: 200 - total flux cleaned = -0.00274702 Jy ! Total flux subtracted in 200 components = -0.00274702 Jy ! Clean residual min=-0.025829 max=0.043148 Jy/beam ! Clean residual mean=0.003674 rms=0.010493 Jy/beam ! Combined flux in latest and established models = 0.689632 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 198 components and 0.689632 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.233839Jy sigma=0.001602 ! Fit after self-cal, rms=0.233712Jy sigma=0.001601 wmodel J1018-3123_S_2002_01_31_yyk\_map.mod ! Writing 198 model components to file: J1018-3123_S_2002_01_31_yyk_map.mod wobs J1018-3123_S_2002_01_31_yyk\_uvs.fits ! Writing UV FITS file: J1018-3123_S_2002_01_31_yyk_uvs.fits wwins J1018-3123_S_2002_01_31_yyk\_map.win ! wwins: Wrote 2 windows to J1018-3123_S_2002_01_31_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0179355 Jy ! Component: 100 - total flux cleaned = 0.0325608 Jy ! Component: 150 - total flux cleaned = 0.0458851 Jy ! Component: 200 - total flux cleaned = 0.0582392 Jy ! Component: 250 - total flux cleaned = 0.0697888 Jy ! Component: 300 - total flux cleaned = 0.0806135 Jy ! Component: 350 - total flux cleaned = 0.0895762 Jy ! Component: 400 - total flux cleaned = 0.097675 Jy ! Component: 450 - total flux cleaned = 0.105738 Jy ! Component: 500 - total flux cleaned = 0.113061 Jy ! Component: 550 - total flux cleaned = 0.120045 Jy ! Component: 600 - total flux cleaned = 0.127062 Jy ! Component: 650 - total flux cleaned = 0.133823 Jy ! Component: 700 - total flux cleaned = 0.140647 Jy ! Component: 750 - total flux cleaned = 0.147593 Jy ! Component: 800 - total flux cleaned = 0.154663 Jy ! Component: 850 - total flux cleaned = 0.161023 Jy ! Component: 900 - total flux cleaned = 0.167789 Jy ! Component: 950 - total flux cleaned = 0.173882 Jy ! Component: 1000 - total flux cleaned = 0.180113 Jy ! Component: 1050 - total flux cleaned = 0.186472 Jy ! Component: 1100 - total flux cleaned = 0.192458 Jy ! Component: 1150 - total flux cleaned = 0.198573 Jy ! Component: 1200 - total flux cleaned = 0.204332 Jy ! Component: 1250 - total flux cleaned = 0.21022 Jy ! Component: 1300 - total flux cleaned = 0.215768 Jy ! Component: 1350 - total flux cleaned = 0.221443 Jy ! Component: 1400 - total flux cleaned = 0.226793 Jy ! Component: 1450 - total flux cleaned = 0.232268 Jy ! Component: 1500 - total flux cleaned = 0.237431 Jy ! Component: 1550 - total flux cleaned = 0.242715 Jy ! Component: 1600 - total flux cleaned = 0.247702 Jy ! Component: 1650 - total flux cleaned = 0.252805 Jy ! Component: 1700 - total flux cleaned = 0.257827 Jy ! Component: 1750 - total flux cleaned = 0.262776 Jy ! Component: 1800 - total flux cleaned = 0.267656 Jy ! Component: 1850 - total flux cleaned = 0.272469 Jy ! Component: 1900 - total flux cleaned = 0.277216 Jy ! Component: 1950 - total flux cleaned = 0.281897 Jy ! Component: 2000 - total flux cleaned = 0.286516 Jy ! Total flux subtracted in 2048 components = 0.290892 Jy ! Clean residual min=-0.008999 max=0.010657 Jy/beam ! Clean residual mean=0.002771 rms=0.003969 Jy/beam ! Combined flux in latest and established models = 0.980525 Jy keep ! Adding 293 model components to the UV plane model. ! The established model now contains 490 components and 0.980524 Jy ![Exited script file: muppet] wmap "J1018-3123_S_2002_01_31_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.135 x 11.15 at 0.3161 degrees (North through East) ! Clean map min=-0.010863 max=0.20202 Jy/beam ! Writing clean map to FITS file: J1018-3123_S_2002_01_31_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.202023 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00394391 device "J1018-3123_S_2002_01_31_yyk\_map.eps/VPS" ! Attempting to open device: 'J1018-3123_S_2002_01_31_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -5.85663 5.85663 11.7133 23.4265 46.853 93.7061 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0118 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.202 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.135 x 11.15 at 0.3161 degrees (North through East) ! Clean map min=-0.010863 max=0.20202 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1018-3123_S_2002_01_31_yyk\_map.gif/gif" ! Attempting to open device: 'J1018-3123_S_2002_01_31_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1018-3123_S_2002_01_31_yyk_uvs.log closed on Tue Jun 26 22:39:03 2007