! Started logfile: J0948-3223_X_2002_01_31_yyk_uvs.log on Wed Jun 27 10:54:59 2007 obs J0948-3223_X_2002_01_31_yyk_uva.fits ! Reading UV FITS file: J0948-3223_X_2002_01_31_yyk_uva.fits ! AN table 1: 85 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.607059 visibilities/baseline/integration-bin. ! Found source: J0948-3223 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40947e+09 8e+06 1 8e+06 ! 02 2 8.47947e+09 8e+06 1 8e+06 ! 03 3 8.79447e+09 8e+06 1 8e+06 ! 04 4 8.89947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1544 lines of history. ! ! Reading 9288 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 flag NL ! Flagging baselines of antenna 1:NL in the currently selected channels. ![@muppet J0948-3223_X_2002_01_31_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.222438 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6651 mas, bmaj=2 mas, bpa=-5.096 degrees ! Estimated noise=1604.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.101574 Jy ! Component: 100 - total flux cleaned = 0.14719 Jy ! Total flux subtracted in 100 components = 0.14719 Jy ! Clean residual min=-0.010350 max=0.016253 Jy/beam ! Clean residual mean=-0.000010 rms=0.003399 Jy/beam ! Combined flux in latest and established models = 0.14719 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.14719 Jy ! ! Correcting IF 1. ! A total of 312 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 279 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 279 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 279 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.165767Jy sigma=0.001360 ! Fit after self-cal, rms=0.165565Jy sigma=0.001358 ! Inverting map and beam ! Estimated beam: bmin=0.6651 mas, bmaj=2 mas, bpa=-5.096 degrees ! Estimated noise=1604.87 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.969 mas, bmaj=2.879 mas, bpa=-8.057 degrees ! Estimated noise=974.695 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0346632 Jy ! Component: 100 - total flux cleaned = 0.0448428 Jy ! Component: 150 - total flux cleaned = 0.0481367 Jy ! Component: 200 - total flux cleaned = 0.0489752 Jy ! Total flux subtracted in 200 components = 0.0489752 Jy ! Clean residual min=-0.008884 max=0.010162 Jy/beam ! Clean residual mean=0.000013 rms=0.002567 Jy/beam ! Combined flux in latest and established models = 0.196165 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 47 components and 0.196165 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161297Jy sigma=0.001316 ! Fit after self-cal, rms=0.161293Jy sigma=0.001316 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.969 x 2.879 at -8.057 degrees (North through East) ! Clean map min=-0.0085434 max=0.11682 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.161293Jy sigma=0.001316 ! Fit after self-cal, rms=0.161225Jy sigma=0.001316 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161225Jy sigma=0.001316 ! Fit after self-cal, rms=0.161217Jy sigma=0.001315 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9693 mas, bmaj=2.882 mas, bpa=-8.002 degrees ! Estimated noise=975.332 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000213483 Jy ! Component: 100 - total flux cleaned = 0.000246178 Jy ! Component: 150 - total flux cleaned = 0.000280452 Jy ! Component: 200 - total flux cleaned = 0.000312762 Jy ! Total flux subtracted in 200 components = 0.000312762 Jy ! Clean residual min=-0.009003 max=0.010199 Jy/beam ! Clean residual mean=0.000013 rms=0.002562 Jy/beam ! Combined flux in latest and established models = 0.196478 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 49 components and 0.196478 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161205Jy sigma=0.001315 ! Fit after self-cal, rms=0.161203Jy sigma=0.001315 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161203Jy sigma=0.001315 ! Fit after self-cal, rms=0.160220Jy sigma=0.001306 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00132226 Jy ! Component: 100 - total flux cleaned = 0.00143242 Jy ! Component: 150 - total flux cleaned = 0.00142709 Jy ! Component: 200 - total flux cleaned = 0.00146741 Jy ! Total flux subtracted in 200 components = 0.00146741 Jy ! Clean residual min=-0.008408 max=0.009803 Jy/beam ! Clean residual mean=0.000014 rms=0.002515 Jy/beam ! Combined flux in latest and established models = 0.197945 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 53 components and 0.197945 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160174Jy sigma=0.001306 ! Fit after self-cal, rms=0.159972Jy sigma=0.001304 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9693 x 2.882 at -8.002 degrees (North through East) ! Clean map min=-0.0077492 max=0.11592 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159972Jy sigma=0.001304 ! Fit after self-cal, rms=0.158810Jy sigma=0.001301 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158810Jy sigma=0.001301 ! Fit after self-cal, rms=0.158739Jy sigma=0.001301 ! Inverting map and beam ! Estimated beam: bmin=0.9564 mas, bmaj=2.836 mas, bpa=-7.819 degrees ! Estimated noise=978.657 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00202333 Jy ! Component: 100 - total flux cleaned = 0.00214769 Jy ! Component: 150 - total flux cleaned = 0.00225704 Jy ! Component: 200 - total flux cleaned = 0.0023242 Jy ! Total flux subtracted in 200 components = 0.0023242 Jy ! Clean residual min=-0.007109 max=0.008755 Jy/beam ! Clean residual mean=0.000007 rms=0.002126 Jy/beam ! Combined flux in latest and established models = 0.20027 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 55 components and 0.20027 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158706Jy sigma=0.001300 ! Fit after self-cal, rms=0.158671Jy sigma=0.001300 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158671Jy sigma=0.001300 ! Fit after self-cal, rms=0.159604Jy sigma=0.001299 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159604Jy sigma=0.001299 ! Fit after self-cal, rms=0.159579Jy sigma=0.001299 ! Inverting map and beam ! Estimated beam: bmin=0.9547 mas, bmaj=2.831 mas, bpa=-7.79 degrees ! Estimated noise=982.382 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000745293 Jy ! Component: 100 - total flux cleaned = 0.000864495 Jy ! Component: 150 - total flux cleaned = 0.000899543 Jy ! Component: 200 - total flux cleaned = 0.0009675 Jy ! Total flux subtracted in 200 components = 0.0009675 Jy ! Clean residual min=-0.007019 max=0.008335 Jy/beam ! Clean residual mean=0.000034 rms=0.002006 Jy/beam ! Combined flux in latest and established models = 0.201237 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 57 components and 0.201237 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159561Jy sigma=0.001299 ! Fit after self-cal, rms=0.159553Jy sigma=0.001299 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.1 mas, bmaj=9.015 mas, bpa=10.66 degrees ! Estimated noise=1182.71 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00163274 Jy ! Component: 100 - total flux cleaned = 0.00168252 Jy ! Component: 150 - total flux cleaned = 0.00177106 Jy ! Component: 200 - total flux cleaned = 0.00185581 Jy ! Total flux subtracted in 200 components = 0.00185581 Jy ! Clean residual min=-0.007842 max=0.008038 Jy/beam ! Clean residual mean=0.000054 rms=0.002654 Jy/beam ! Combined flux in latest and established models = 0.203093 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 5 model components to the UV plane model. ! The established model now contains 59 components and 0.203093 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159568Jy sigma=0.001299 ! Fit after self-cal, rms=0.159551Jy sigma=0.001299 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6564 mas, bmaj=1.99 mas, bpa=-4.938 degrees ! Estimated noise=1599.57 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.103355 Jy ! Component: 100 - total flux cleaned = 0.150156 Jy ! Component: 150 - total flux cleaned = 0.173381 Jy ! Component: 200 - total flux cleaned = 0.185195 Jy ! Total flux subtracted in 200 components = 0.185195 Jy ! Clean residual min=-0.008825 max=0.008092 Jy/beam ! Clean residual mean=0.000012 rms=0.002256 Jy/beam ! Combined flux in latest and established models = 0.185195 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 0.185195 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9547 mas, bmaj=2.831 mas, bpa=-7.79 degrees ! Estimated noise=982.382 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0110666 Jy ! Component: 100 - total flux cleaned = 0.0144527 Jy ! Component: 150 - total flux cleaned = 0.0147966 Jy ! Component: 200 - total flux cleaned = 0.015042 Jy ! Total flux subtracted in 200 components = 0.015042 Jy ! Clean residual min=-0.007046 max=0.007975 Jy/beam ! Clean residual mean=0.000032 rms=0.001967 Jy/beam ! Combined flux in latest and established models = 0.200237 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 42 components and 0.200237 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.1 mas, bmaj=9.015 mas, bpa=10.66 degrees ! Estimated noise=1182.71 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00210829 Jy ! Component: 100 - total flux cleaned = 0.0022209 Jy ! Component: 150 - total flux cleaned = 0.0023281 Jy ! Component: 200 - total flux cleaned = 0.00248194 Jy ! Total flux subtracted in 200 components = 0.00248194 Jy ! Clean residual min=-0.007588 max=0.007780 Jy/beam ! Clean residual mean=0.000051 rms=0.002596 Jy/beam ! Combined flux in latest and established models = 0.202719 Jy ! Adding 4 model components to the UV plane model. ! The established model now contains 45 components and 0.202719 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9547 mas, bmaj=2.831 mas, bpa=-7.79 degrees ! Estimated noise=982.382 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00142935 Jy ! Component: 100 - total flux cleaned = -0.0013151 Jy ! Component: 150 - total flux cleaned = -0.00121958 Jy ! Component: 200 - total flux cleaned = -0.00113967 Jy ! Total flux subtracted in 200 components = -0.00113967 Jy ! Clean residual min=-0.006938 max=0.007638 Jy/beam ! Clean residual mean=0.000033 rms=0.001945 Jy/beam ! Combined flux in latest and established models = 0.201579 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 53 components and 0.201579 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159518Jy sigma=0.001298 ! Fit after self-cal, rms=0.159488Jy sigma=0.001298 wmodel J0948-3223_X_2002_01_31_yyk\_map.mod ! Writing 53 model components to file: J0948-3223_X_2002_01_31_yyk_map.mod wobs J0948-3223_X_2002_01_31_yyk\_uvs.fits ! Applying 85 buffered edits. ! Writing UV FITS file: J0948-3223_X_2002_01_31_yyk_uvs.fits wwins J0948-3223_X_2002_01_31_yyk\_map.win ! wwins: Wrote 1 windows to J0948-3223_X_2002_01_31_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -9.5917e-05 Jy ! Component: 100 - total flux cleaned = 0.000237873 Jy ! Component: 150 - total flux cleaned = 0.000634888 Jy ! Component: 200 - total flux cleaned = 0.000909074 Jy ! Component: 250 - total flux cleaned = 0.00133743 Jy ! Component: 300 - total flux cleaned = 0.00166215 Jy ! Component: 350 - total flux cleaned = 0.00189403 Jy ! Component: 400 - total flux cleaned = 0.00218392 Jy ! Component: 450 - total flux cleaned = 0.00253196 Jy ! Component: 500 - total flux cleaned = 0.00313285 Jy ! Component: 550 - total flux cleaned = 0.00351845 Jy ! Component: 600 - total flux cleaned = 0.00401691 Jy ! Component: 650 - total flux cleaned = 0.00449512 Jy ! Component: 700 - total flux cleaned = 0.00495621 Jy ! Component: 750 - total flux cleaned = 0.0052365 Jy ! Component: 800 - total flux cleaned = 0.00556297 Jy ! Component: 850 - total flux cleaned = 0.0058261 Jy ! Component: 900 - total flux cleaned = 0.0060297 Jy ! Component: 950 - total flux cleaned = 0.00617961 Jy ! Component: 1000 - total flux cleaned = 0.00622902 Jy ! Component: 1050 - total flux cleaned = 0.00641902 Jy ! Component: 1100 - total flux cleaned = 0.00651248 Jy ! Component: 1150 - total flux cleaned = 0.00673921 Jy ! Component: 1200 - total flux cleaned = 0.00682788 Jy ! Component: 1250 - total flux cleaned = 0.00717411 Jy ! Component: 1300 - total flux cleaned = 0.00730116 Jy ! Component: 1350 - total flux cleaned = 0.00742594 Jy ! Component: 1400 - total flux cleaned = 0.00766907 Jy ! Component: 1450 - total flux cleaned = 0.00790601 Jy ! Component: 1500 - total flux cleaned = 0.00806195 Jy ! Component: 1550 - total flux cleaned = 0.00821402 Jy ! Component: 1600 - total flux cleaned = 0.00832644 Jy ! Component: 1650 - total flux cleaned = 0.00832579 Jy ! Component: 1700 - total flux cleaned = 0.00832577 Jy ! Component: 1750 - total flux cleaned = 0.00828991 Jy ! Component: 1800 - total flux cleaned = 0.00818451 Jy ! Component: 1850 - total flux cleaned = 0.00818457 Jy ! Component: 1900 - total flux cleaned = 0.00815137 Jy ! Component: 1950 - total flux cleaned = 0.00811839 Jy ! Component: 2000 - total flux cleaned = 0.00801941 Jy ! Total flux subtracted in 2048 components = 0.00805248 Jy ! Clean residual min=-0.001657 max=0.001893 Jy/beam ! Clean residual mean=-0.000006 rms=0.000620 Jy/beam ! Combined flux in latest and established models = 0.209632 Jy keep ! Adding 125 model components to the UV plane model. ! The established model now contains 178 components and 0.209632 Jy ![Exited script file: muppet] wmap "J0948-3223_X_2002_01_31_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9547 x 2.831 at -7.79 degrees (North through East) ! Clean map min=-0.0058028 max=0.11763 Jy/beam ! Writing clean map to FITS file: J0948-3223_X_2002_01_31_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.117627 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00061819 device "J0948-3223_X_2002_01_31_yyk\_map.eps/VPS" ! Attempting to open device: 'J0948-3223_X_2002_01_31_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.57665 1.57665 3.1533 6.30661 12.6132 25.2264 50.4529 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.117 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9547 x 2.831 at -7.79 degrees (North through East) ! Clean map min=-0.0058028 max=0.11763 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0948-3223_X_2002_01_31_yyk\_map.gif/gif" ! Attempting to open device: 'J0948-3223_X_2002_01_31_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0948-3223_X_2002_01_31_yyk_uvs.log closed on Wed Jun 27 10:55:06 2007