! Started logfile: J0920-3631_X_2002_05_14_yyk_uvs.log on Tue Jun 26 22:36:30 2007 obs J0920-3631_X_2002_05_14_yyk_uva.fits ! Reading UV FITS file: J0920-3631_X_2002_05_14_yyk_uva.fits ! AN table 1: 36 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.8 visibilities/baseline/integration-bin. ! Found source: J0920-3631 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40947e+09 8e+06 1 8e+06 ! 02 2 8.47947e+09 8e+06 1 8e+06 ! 03 3 8.79447e+09 8e+06 1 8e+06 ! 04 4 8.89947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1076 lines of history. ! ! Reading 5184 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0920-3631_X_2002_05_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.256888 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6378 mas, bmaj=1.82 mas, bpa=7.911 degrees ! Estimated noise=2547.1 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.119031 Jy ! Component: 100 - total flux cleaned = 0.152696 Jy ! Total flux subtracted in 100 components = 0.152696 Jy ! Clean residual min=-0.012563 max=0.019092 Jy/beam ! Clean residual mean=-0.000107 rms=0.004466 Jy/beam ! Combined flux in latest and established models = 0.152696 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.152696 Jy ! ! Correcting IF 1. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.209708Jy sigma=0.001262 ! Fit after self-cal, rms=0.209488Jy sigma=0.001260 ! Inverting map and beam ! Estimated beam: bmin=0.6378 mas, bmaj=1.82 mas, bpa=7.911 degrees ! Estimated noise=2547.1 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8706 mas, bmaj=2.305 mas, bpa=8.703 degrees ! Estimated noise=1499.72 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0281911 Jy ! Component: 100 - total flux cleaned = 0.0390994 Jy ! Component: 150 - total flux cleaned = 0.0427792 Jy ! Component: 200 - total flux cleaned = 0.0433211 Jy ! Total flux subtracted in 200 components = 0.0433211 Jy ! Clean residual min=-0.010534 max=0.016909 Jy/beam ! Clean residual mean=-0.000129 rms=0.003666 Jy/beam ! Combined flux in latest and established models = 0.196017 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 31 components and 0.196017 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.207958Jy sigma=0.001243 ! Fit after self-cal, rms=0.207937Jy sigma=0.001243 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8706 x 2.305 at 8.703 degrees (North through East) ! Clean map min=-0.010142 max=0.12849 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.997392 ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.90 HN 1.00* KP 0.96 ! LA 0.85 NL 1.13 OV 1.03 PT 1.11 ! SC 1.07 MK 0.90 ! ! ! Fit before self-cal, rms=0.207937Jy sigma=0.001243 ! Fit after self-cal, rms=0.208363Jy sigma=0.001242 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.208363Jy sigma=0.001242 ! Fit after self-cal, rms=0.208361Jy sigma=0.001242 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8696 mas, bmaj=2.298 mas, bpa=7.806 degrees ! Estimated noise=1492.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -3.54115e-05 Jy ! Component: 100 - total flux cleaned = 8.62828e-05 Jy ! Component: 150 - total flux cleaned = 0.000316419 Jy ! Component: 200 - total flux cleaned = 0.000647964 Jy ! Total flux subtracted in 200 components = 0.000647964 Jy ! Clean residual min=-0.008928 max=0.015552 Jy/beam ! Clean residual mean=-0.000095 rms=0.003293 Jy/beam ! Combined flux in latest and established models = 0.196665 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 34 components and 0.196665 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.208241Jy sigma=0.001241 ! Fit after self-cal, rms=0.208233Jy sigma=0.001241 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.208233Jy sigma=0.001241 ! Fit after self-cal, rms=0.205959Jy sigma=0.001227 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.4, 0.8). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0155807 Jy ! Component: 100 - total flux cleaned = 0.0213694 Jy ! Component: 150 - total flux cleaned = 0.0220978 Jy ! Component: 200 - total flux cleaned = 0.0230384 Jy ! Total flux subtracted in 200 components = 0.0230384 Jy ! Clean residual min=-0.007157 max=0.009883 Jy/beam ! Clean residual mean=-0.000055 rms=0.002554 Jy/beam ! Combined flux in latest and established models = 0.219703 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 51 components and 0.219703 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.205049Jy sigma=0.001221 ! Fit after self-cal, rms=0.204813Jy sigma=0.001219 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8696 x 2.298 at 7.806 degrees (North through East) ! Clean map min=-0.0068388 max=0.12506 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.204813Jy sigma=0.001219 ! Fit after self-cal, rms=0.204007Jy sigma=0.001215 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.204007Jy sigma=0.001215 ! Fit after self-cal, rms=0.203994Jy sigma=0.001215 ! Inverting map and beam ! Estimated beam: bmin=0.8753 mas, bmaj=2.314 mas, bpa=8.566 degrees ! Estimated noise=1467.16 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000545274 Jy ! Component: 100 - total flux cleaned = 0.00106579 Jy ! Component: 150 - total flux cleaned = 0.00116968 Jy ! Component: 200 - total flux cleaned = 0.00133843 Jy ! Total flux subtracted in 200 components = 0.00133843 Jy ! Clean residual min=-0.005688 max=0.006712 Jy/beam ! Clean residual mean=-0.000040 rms=0.001821 Jy/beam ! Combined flux in latest and established models = 0.221042 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 66 components and 0.221042 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.203824Jy sigma=0.001214 ! Fit after self-cal, rms=0.203792Jy sigma=0.001214 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.203792Jy sigma=0.001214 ! Fit after self-cal, rms=0.202720Jy sigma=0.001214 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.202720Jy sigma=0.001214 ! Fit after self-cal, rms=0.202707Jy sigma=0.001214 ! Inverting map and beam ! Estimated beam: bmin=0.8705 mas, bmaj=2.303 mas, bpa=8.353 degrees ! Estimated noise=1448.57 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000203383 Jy ! Component: 100 - total flux cleaned = 0.000466399 Jy ! Component: 150 - total flux cleaned = 0.000682462 Jy ! Component: 200 - total flux cleaned = 0.00080017 Jy ! Total flux subtracted in 200 components = 0.00080017 Jy ! Clean residual min=-0.005488 max=0.006212 Jy/beam ! Clean residual mean=-0.000041 rms=0.001745 Jy/beam ! Combined flux in latest and established models = 0.221842 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 76 components and 0.221842 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.202626Jy sigma=0.001213 ! Fit after self-cal, rms=0.202613Jy sigma=0.001213 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.619 mas, bmaj=10.08 mas, bpa=11.23 degrees ! Estimated noise=1815.65 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00108981 Jy ! Component: 100 - total flux cleaned = 0.00118423 Jy ! Component: 150 - total flux cleaned = 0.00127244 Jy ! Component: 200 - total flux cleaned = 0.00131448 Jy ! Total flux subtracted in 200 components = 0.00131448 Jy ! Clean residual min=-0.007416 max=0.006461 Jy/beam ! Clean residual mean=-0.000052 rms=0.002331 Jy/beam ! Combined flux in latest and established models = 0.223156 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 81 components and 0.223156 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.202597Jy sigma=0.001213 ! Fit after self-cal, rms=0.202599Jy sigma=0.001213 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6367 mas, bmaj=1.818 mas, bpa=7.768 degrees ! Estimated noise=2465.48 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.11863 Jy ! Component: 100 - total flux cleaned = 0.153933 Jy ! Component: 150 - total flux cleaned = 0.17489 Jy ! Component: 200 - total flux cleaned = 0.189036 Jy ! Total flux subtracted in 200 components = 0.189036 Jy ! Clean residual min=-0.008810 max=0.010162 Jy/beam ! Clean residual mean=-0.000052 rms=0.002747 Jy/beam ! Combined flux in latest and established models = 0.189036 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 0.189036 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8705 mas, bmaj=2.303 mas, bpa=8.353 degrees ! Estimated noise=1448.57 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0145441 Jy ! Component: 100 - total flux cleaned = 0.0221733 Jy ! Component: 150 - total flux cleaned = 0.026899 Jy ! Component: 200 - total flux cleaned = 0.0298643 Jy ! Total flux subtracted in 200 components = 0.0298643 Jy ! Clean residual min=-0.005755 max=0.006449 Jy/beam ! Clean residual mean=-0.000039 rms=0.001756 Jy/beam ! Combined flux in latest and established models = 0.2189 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 58 components and 0.2189 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.619 mas, bmaj=10.08 mas, bpa=11.23 degrees ! Estimated noise=1815.65 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00246261 Jy ! Component: 100 - total flux cleaned = 0.00324582 Jy ! Component: 150 - total flux cleaned = 0.00334854 Jy ! Component: 200 - total flux cleaned = 0.00341529 Jy ! Total flux subtracted in 200 components = 0.00341529 Jy ! Clean residual min=-0.007241 max=0.006448 Jy/beam ! Clean residual mean=-0.000051 rms=0.002294 Jy/beam ! Combined flux in latest and established models = 0.222315 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 62 components and 0.222315 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8705 mas, bmaj=2.303 mas, bpa=8.353 degrees ! Estimated noise=1448.57 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000633045 Jy ! Component: 100 - total flux cleaned = -0.000567617 Jy ! Component: 150 - total flux cleaned = -0.000393563 Jy ! Component: 200 - total flux cleaned = -0.000339207 Jy ! Total flux subtracted in 200 components = -0.000339207 Jy ! Clean residual min=-0.005614 max=0.006343 Jy/beam ! Clean residual mean=-0.000035 rms=0.001703 Jy/beam ! Combined flux in latest and established models = 0.221976 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 72 components and 0.221976 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.202580Jy sigma=0.001213 ! Fit after self-cal, rms=0.202587Jy sigma=0.001213 wmodel J0920-3631_X_2002_05_14_yyk\_map.mod ! Writing 72 model components to file: J0920-3631_X_2002_05_14_yyk_map.mod wobs J0920-3631_X_2002_05_14_yyk\_uvs.fits ! Writing UV FITS file: J0920-3631_X_2002_05_14_yyk_uvs.fits wwins J0920-3631_X_2002_05_14_yyk\_map.win ! wwins: Wrote 2 windows to J0920-3631_X_2002_05_14_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00135268 Jy ! Component: 100 - total flux cleaned = 0.000982775 Jy ! Component: 150 - total flux cleaned = 0.000371773 Jy ! Component: 200 - total flux cleaned = -0.000528493 Jy ! Component: 250 - total flux cleaned = -0.00121973 Jy ! Component: 300 - total flux cleaned = -0.00194973 Jy ! Component: 350 - total flux cleaned = -0.00236825 Jy ! Component: 400 - total flux cleaned = -0.00276909 Jy ! Component: 450 - total flux cleaned = -0.00289809 Jy ! Component: 500 - total flux cleaned = -0.00314899 Jy ! Component: 550 - total flux cleaned = -0.00320936 Jy ! Component: 600 - total flux cleaned = -0.00320871 Jy ! Component: 650 - total flux cleaned = -0.00315173 Jy ! Component: 700 - total flux cleaned = -0.00309537 Jy ! Component: 750 - total flux cleaned = -0.00298459 Jy ! Component: 800 - total flux cleaned = -0.00293019 Jy ! Component: 850 - total flux cleaned = -0.00293055 Jy ! Component: 900 - total flux cleaned = -0.00287882 Jy ! Component: 950 - total flux cleaned = -0.00287928 Jy ! Component: 1000 - total flux cleaned = -0.00287958 Jy ! Component: 1050 - total flux cleaned = -0.00292924 Jy ! Component: 1100 - total flux cleaned = -0.00302537 Jy ! Component: 1150 - total flux cleaned = -0.00302467 Jy ! Component: 1200 - total flux cleaned = -0.00293152 Jy ! Component: 1250 - total flux cleaned = -0.00297886 Jy ! Component: 1300 - total flux cleaned = -0.00306986 Jy ! Component: 1350 - total flux cleaned = -0.00311438 Jy ! Component: 1400 - total flux cleaned = -0.00302645 Jy ! Component: 1450 - total flux cleaned = -0.00311445 Jy ! Component: 1500 - total flux cleaned = -0.00311472 Jy ! Component: 1550 - total flux cleaned = -0.00324275 Jy ! Component: 1600 - total flux cleaned = -0.00328462 Jy ! Component: 1650 - total flux cleaned = -0.00340906 Jy ! Component: 1700 - total flux cleaned = -0.00332607 Jy ! Component: 1750 - total flux cleaned = -0.00340788 Jy ! Component: 1800 - total flux cleaned = -0.00344884 Jy ! Component: 1850 - total flux cleaned = -0.00365098 Jy ! Component: 1900 - total flux cleaned = -0.0037314 Jy ! Component: 1950 - total flux cleaned = -0.00373133 Jy ! Component: 2000 - total flux cleaned = -0.00396994 Jy ! Total flux subtracted in 2048 components = -0.0041281 Jy ! Clean residual min=-0.002424 max=0.002585 Jy/beam ! Clean residual mean=-0.000012 rms=0.000764 Jy/beam ! Combined flux in latest and established models = 0.217848 Jy keep ! Adding 122 model components to the UV plane model. ! The established model now contains 194 components and 0.217848 Jy ![Exited script file: muppet] wmap "J0920-3631_X_2002_05_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8705 x 2.303 at 8.353 degrees (North through East) ! Clean map min=-0.0042748 max=0.12415 Jy/beam ! Writing clean map to FITS file: J0920-3631_X_2002_05_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.124154 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000741219 device "J0920-3631_X_2002_05_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J0920-3631_X_2002_05_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.79105 1.79105 3.58211 7.16422 14.3284 28.6569 57.3137 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0022 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.124 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8705 x 2.303 at 8.353 degrees (North through East) ! Clean map min=-0.0042748 max=0.12415 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0920-3631_X_2002_05_14_yyk\_map.gif/gif" ! Attempting to open device: 'J0920-3631_X_2002_05_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0920-3631_X_2002_05_14_yyk_uvs.log closed on Tue Jun 26 22:36:36 2007