! Started logfile: J0920-3631_S_2002_05_14_yyk_uvs.log on Tue Jun 26 22:36:17 2007 obs J0920-3631_S_2002_05_14_yyk_uva.fits ! Reading UV FITS file: J0920-3631_S_2002_05_14_yyk_uva.fits ! AN table 1: 36 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.8 visibilities/baseline/integration-bin. ! Found source: J0920-3631 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22947e+09 8e+06 1 8e+06 ! 02 2 2.25947e+09 8e+06 1 8e+06 ! 03 3 2.34947e+09 8e+06 1 8e+06 ! 04 4 2.36947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1153 lines of history. ! ! Reading 5184 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0920-3631_S_2002_05_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.290152 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.322 mas, bmaj=6.76 mas, bpa=8.602 degrees ! Estimated noise=2388.47 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.12407 Jy ! Component: 100 - total flux cleaned = 0.16575 Jy ! Total flux subtracted in 100 components = 0.16575 Jy ! Clean residual min=-0.011380 max=0.016005 Jy/beam ! Clean residual mean=0.000269 rms=0.004334 Jy/beam ! Combined flux in latest and established models = 0.16575 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.16575 Jy ! ! Correcting IF 1. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.243139Jy sigma=0.001259 ! Fit after self-cal, rms=0.242997Jy sigma=0.001258 ! Inverting map and beam ! Estimated beam: bmin=2.322 mas, bmaj=6.76 mas, bpa=8.602 degrees ! Estimated noise=2388.47 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.119 mas, bmaj=8.327 mas, bpa=6.417 degrees ! Estimated noise=1818.92 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0345682 Jy ! Component: 100 - total flux cleaned = 0.0477719 Jy ! Component: 150 - total flux cleaned = 0.0531265 Jy ! Component: 200 - total flux cleaned = 0.0538595 Jy ! Total flux subtracted in 200 components = 0.0538595 Jy ! Clean residual min=-0.012028 max=0.019055 Jy/beam ! Clean residual mean=0.000399 rms=0.004481 Jy/beam ! Combined flux in latest and established models = 0.219609 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 53 components and 0.219609 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.240827Jy sigma=0.001239 ! Fit after self-cal, rms=0.240811Jy sigma=0.001239 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.119 x 8.327 at 6.417 degrees (North through East) ! Clean map min=-0.011635 max=0.1283 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Fit before self-cal, rms=0.240811Jy sigma=0.001239 ! Fit after self-cal, rms=0.240811Jy sigma=0.001239 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.240811Jy sigma=0.001239 ! Fit after self-cal, rms=0.240811Jy sigma=0.001239 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.119 mas, bmaj=8.327 mas, bpa=6.417 degrees ! Estimated noise=1818.92 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00046366 Jy ! Component: 100 - total flux cleaned = 0.000905804 Jy ! Component: 150 - total flux cleaned = 0.00142079 Jy ! Component: 200 - total flux cleaned = 0.00171701 Jy ! Total flux subtracted in 200 components = 0.00171701 Jy ! Clean residual min=-0.011947 max=0.018835 Jy/beam ! Clean residual mean=0.000388 rms=0.004444 Jy/beam ! Combined flux in latest and established models = 0.221326 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 60 components and 0.221326 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.240750Jy sigma=0.001239 ! Fit after self-cal, rms=0.240750Jy sigma=0.001239 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.240750Jy sigma=0.001239 ! Fit after self-cal, rms=0.239632Jy sigma=0.001233 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00171224 Jy ! Component: 100 - total flux cleaned = 0.00209085 Jy ! Component: 150 - total flux cleaned = 0.00234036 Jy ! Component: 200 - total flux cleaned = 0.00265214 Jy ! Total flux subtracted in 200 components = 0.00265214 Jy ! Clean residual min=-0.011165 max=0.018957 Jy/beam ! Clean residual mean=0.000376 rms=0.004348 Jy/beam ! Combined flux in latest and established models = 0.223978 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 65 components and 0.223978 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.239591Jy sigma=0.001232 ! Fit after self-cal, rms=0.239460Jy sigma=0.001231 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.119 x 8.327 at 6.417 degrees (North through East) ! Clean map min=-0.011129 max=0.12444 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.239460Jy sigma=0.001231 ! Fit after self-cal, rms=0.239460Jy sigma=0.001231 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.239460Jy sigma=0.001231 ! Fit after self-cal, rms=0.239454Jy sigma=0.001231 ! Inverting map and beam ! Estimated beam: bmin=3.119 mas, bmaj=8.327 mas, bpa=6.417 degrees ! Estimated noise=1818.92 mJy/beam. ! Added new window around map position (7.5, -13). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.020323 Jy ! Component: 100 - total flux cleaned = 0.0280279 Jy ! Component: 150 - total flux cleaned = 0.0325181 Jy ! Component: 200 - total flux cleaned = 0.0340774 Jy ! Total flux subtracted in 200 components = 0.0340774 Jy ! Clean residual min=-0.009249 max=0.010479 Jy/beam ! Clean residual mean=0.000082 rms=0.003061 Jy/beam ! Combined flux in latest and established models = 0.258056 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 40 model components to the UV plane model. ! The established model now contains 102 components and 0.258056 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.238267Jy sigma=0.001224 ! Fit after self-cal, rms=0.238179Jy sigma=0.001224 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.238179Jy sigma=0.001224 ! Fit after self-cal, rms=0.237804Jy sigma=0.001224 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.237804Jy sigma=0.001224 ! Fit after self-cal, rms=0.237795Jy sigma=0.001224 ! Inverting map and beam ! Estimated beam: bmin=3.16 mas, bmaj=8.431 mas, bpa=6.486 degrees ! Estimated noise=1808.97 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00360386 Jy ! Component: 100 - total flux cleaned = 0.00446277 Jy ! Component: 150 - total flux cleaned = 0.00488708 Jy ! Component: 200 - total flux cleaned = 0.00488678 Jy ! Total flux subtracted in 200 components = 0.00488678 Jy ! Clean residual min=-0.009695 max=0.009748 Jy/beam ! Clean residual mean=-0.000016 rms=0.002860 Jy/beam ! Combined flux in latest and established models = 0.262943 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 121 components and 0.262943 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.237629Jy sigma=0.001223 ! Fit after self-cal, rms=0.237621Jy sigma=0.001223 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.932 mas, bmaj=30.55 mas, bpa=10.7 degrees ! Estimated noise=2280.83 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00256963 Jy ! Component: 100 - total flux cleaned = 0.00276553 Jy ! Component: 150 - total flux cleaned = 0.00285149 Jy ! Component: 200 - total flux cleaned = 0.0027756 Jy ! Total flux subtracted in 200 components = 0.0027756 Jy ! Clean residual min=-0.011667 max=0.010797 Jy/beam ! Clean residual mean=-0.000089 rms=0.003980 Jy/beam ! Combined flux in latest and established models = 0.265718 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 125 components and 0.265718 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.237581Jy sigma=0.001223 ! Fit after self-cal, rms=0.237581Jy sigma=0.001223 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.338 mas, bmaj=6.795 mas, bpa=8.503 degrees ! Estimated noise=2394.73 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.125241 Jy ! Component: 100 - total flux cleaned = 0.165858 Jy ! Component: 150 - total flux cleaned = 0.188933 Jy ! Component: 200 - total flux cleaned = 0.205208 Jy ! Total flux subtracted in 200 components = 0.205208 Jy ! Clean residual min=-0.012169 max=0.010947 Jy/beam ! Clean residual mean=0.000191 rms=0.003371 Jy/beam ! Combined flux in latest and established models = 0.205208 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 49 model components to the UV plane model. ! The established model now contains 49 components and 0.205208 Jy ! Inverting map and beam ! Estimated beam: bmin=3.16 mas, bmaj=8.431 mas, bpa=6.486 degrees ! Estimated noise=1808.97 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.02101 Jy ! Component: 100 - total flux cleaned = 0.0340602 Jy ! Component: 150 - total flux cleaned = 0.0428272 Jy ! Component: 200 - total flux cleaned = 0.0488369 Jy ! Total flux subtracted in 200 components = 0.0488369 Jy ! Clean residual min=-0.009956 max=0.009354 Jy/beam ! Clean residual mean=0.000053 rms=0.002928 Jy/beam ! Combined flux in latest and established models = 0.254045 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 96 components and 0.254045 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.932 mas, bmaj=30.55 mas, bpa=10.7 degrees ! Estimated noise=2280.83 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0066865 Jy ! Component: 100 - total flux cleaned = 0.0101691 Jy ! Component: 150 - total flux cleaned = 0.0105573 Jy ! Component: 200 - total flux cleaned = 0.0108238 Jy ! Total flux subtracted in 200 components = 0.0108238 Jy ! Clean residual min=-0.011501 max=0.010826 Jy/beam ! Clean residual mean=-0.000074 rms=0.003965 Jy/beam ! Combined flux in latest and established models = 0.264869 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 102 components and 0.264869 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.16 mas, bmaj=8.431 mas, bpa=6.486 degrees ! Estimated noise=1808.97 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000587895 Jy ! Component: 100 - total flux cleaned = -0.000348576 Jy ! Component: 150 - total flux cleaned = -9.09709e-05 Jy ! Component: 200 - total flux cleaned = 5.20428e-05 Jy ! Total flux subtracted in 200 components = 5.20428e-05 Jy ! Clean residual min=-0.009156 max=0.009306 Jy/beam ! Clean residual mean=-0.000036 rms=0.002746 Jy/beam ! Combined flux in latest and established models = 0.264921 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 116 components and 0.264921 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.237500Jy sigma=0.001223 ! Fit after self-cal, rms=0.237493Jy sigma=0.001223 wmodel J0920-3631_S_2002_05_14_yyk\_map.mod ! Writing 116 model components to file: J0920-3631_S_2002_05_14_yyk_map.mod wobs J0920-3631_S_2002_05_14_yyk\_uvs.fits ! Writing UV FITS file: J0920-3631_S_2002_05_14_yyk_uvs.fits wwins J0920-3631_S_2002_05_14_yyk\_map.win ! wwins: Wrote 2 windows to J0920-3631_S_2002_05_14_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000784003 Jy ! Component: 100 - total flux cleaned = -0.00149836 Jy ! Component: 150 - total flux cleaned = -0.0016269 Jy ! Component: 200 - total flux cleaned = -0.00174919 Jy ! Component: 250 - total flux cleaned = -0.0014086 Jy ! Component: 300 - total flux cleaned = -0.0013012 Jy ! Component: 350 - total flux cleaned = -0.00119928 Jy ! Component: 400 - total flux cleaned = -0.0012 Jy ! Component: 450 - total flux cleaned = -0.00119834 Jy ! Component: 500 - total flux cleaned = -0.00101376 Jy ! Component: 550 - total flux cleaned = -0.000837788 Jy ! Component: 600 - total flux cleaned = -0.000668189 Jy ! Component: 650 - total flux cleaned = -0.000586912 Jy ! Component: 700 - total flux cleaned = -0.000586096 Jy ! Component: 750 - total flux cleaned = -0.000508268 Jy ! Component: 800 - total flux cleaned = -0.000283271 Jy ! Component: 850 - total flux cleaned = -6.40831e-05 Jy ! Component: 900 - total flux cleaned = 0.000218758 Jy ! Component: 950 - total flux cleaned = 0.000425533 Jy ! Component: 1000 - total flux cleaned = 0.000694616 Jy ! Component: 1050 - total flux cleaned = 0.000826429 Jy ! Component: 1100 - total flux cleaned = 0.000890782 Jy ! Component: 1150 - total flux cleaned = 0.000954119 Jy ! Component: 1200 - total flux cleaned = 0.00114005 Jy ! Component: 1250 - total flux cleaned = 0.00132193 Jy ! Component: 1300 - total flux cleaned = 0.00150074 Jy ! Component: 1350 - total flux cleaned = 0.00167715 Jy ! Component: 1400 - total flux cleaned = 0.00185125 Jy ! Component: 1450 - total flux cleaned = 0.00208004 Jy ! Component: 1500 - total flux cleaned = 0.00241795 Jy ! Component: 1550 - total flux cleaned = 0.00252875 Jy ! Component: 1600 - total flux cleaned = 0.00285812 Jy ! Component: 1650 - total flux cleaned = 0.00307523 Jy ! Component: 1700 - total flux cleaned = 0.00334407 Jy ! Component: 1750 - total flux cleaned = 0.00366288 Jy ! Component: 1800 - total flux cleaned = 0.00387302 Jy ! Component: 1850 - total flux cleaned = 0.00413347 Jy ! Component: 1900 - total flux cleaned = 0.00439139 Jy ! Component: 1950 - total flux cleaned = 0.00459599 Jy ! Component: 2000 - total flux cleaned = 0.00485018 Jy ! Total flux subtracted in 2048 components = 0.00510146 Jy ! Clean residual min=-0.003418 max=0.003004 Jy/beam ! Clean residual mean=0.000091 rms=0.000989 Jy/beam ! Combined flux in latest and established models = 0.270023 Jy keep ! Adding 127 model components to the UV plane model. ! The established model now contains 243 components and 0.270023 Jy ![Exited script file: muppet] wmap "J0920-3631_S_2002_05_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.16 x 8.431 at 6.486 degrees (North through East) ! Clean map min=-0.0082075 max=0.12886 Jy/beam ! Writing clean map to FITS file: J0920-3631_S_2002_05_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.128863 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000942241 device "J0920-3631_S_2002_05_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J0920-3631_S_2002_05_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.19359 2.19359 4.38717 8.77434 17.5487 35.0974 70.1947 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0028 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.128 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.16 x 8.431 at 6.486 degrees (North through East) ! Clean map min=-0.0082075 max=0.12886 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0920-3631_S_2002_05_14_yyk\_map.gif/gif" ! Attempting to open device: 'J0920-3631_S_2002_05_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0920-3631_S_2002_05_14_yyk_uvs.log closed on Tue Jun 26 22:36:24 2007