! Started logfile: J0905-3927_S_2002_01_31_yyk_uvs.log on Tue Jun 26 22:35:24 2007 obs J0905-3927_S_2002_01_31_yyk_uva.fits ! Reading UV FITS file: J0905-3927_S_2002_01_31_yyk_uva.fits ! AN table 1: 35 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.462857 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0905-3927 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22947e+09 8e+06 1 8e+06 ! 02 2 2.25947e+09 8e+06 1 8e+06 ! 03 3 2.34947e+09 8e+06 1 8e+06 ! 04 4 2.36947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1225 lines of history. ! ! Reading 2916 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0905-3927_S_2002_01_31_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.280531 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.807 mas, bmaj=26.81 mas, bpa=-18.06 degrees ! Estimated noise=5547.91 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00336864 Jy ! Component: 100 - total flux cleaned = -0.000161732 Jy ! Total flux subtracted in 100 components = -0.000161732 Jy ! Clean residual min=-0.016199 max=0.016200 Jy/beam ! Clean residual mean=0.000457 rms=0.007591 Jy/beam ! Combined flux in latest and established models = -0.000161733 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and -0.000161733 Jy ! ! Correcting IF 1. ! A total of 245 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 141 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 141 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 176 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.276006Jy sigma=0.001688 ! Fit after self-cal, rms=0.275588Jy sigma=0.001686 ! Inverting map and beam ! Estimated beam: bmin=2.807 mas, bmaj=26.81 mas, bpa=-18.06 degrees ! Estimated noise=5547.91 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.238 mas, bmaj=30.8 mas, bpa=-18.26 degrees ! Estimated noise=2771.07 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00149879 Jy ! Component: 100 - total flux cleaned = 0.00674424 Jy ! Component: 150 - total flux cleaned = 0.0110546 Jy ! Component: 200 - total flux cleaned = 0.0126731 Jy ! Total flux subtracted in 200 components = 0.0126731 Jy ! Clean residual min=-0.004705 max=0.004692 Jy/beam ! Clean residual mean=0.000593 rms=0.002151 Jy/beam ! Combined flux in latest and established models = 0.0125114 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 66 model components to the UV plane model. ! The established model now contains 99 components and 0.0125114 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.273785Jy sigma=0.001671 ! Fit after self-cal, rms=0.273330Jy sigma=0.001668 ! Inverting map ! Added new window around map position (10, -23.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00510217 Jy ! Component: 100 - total flux cleaned = 0.00702089 Jy ! Component: 150 - total flux cleaned = 0.00929609 Jy ! Component: 200 - total flux cleaned = 0.01052 Jy ! Total flux subtracted in 200 components = 0.01052 Jy ! Clean residual min=-0.005679 max=0.009146 Jy/beam ! Clean residual mean=0.000442 rms=0.002276 Jy/beam ! Combined flux in latest and established models = 0.0230314 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 48 model components to the UV plane model. ! The established model now contains 146 components and 0.0230313 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.272638Jy sigma=0.001664 ! Fit after self-cal, rms=0.272502Jy sigma=0.001663 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.238 x 30.8 at -18.26 degrees (North through East) ! Clean map min=-0.016044 max=0.019442 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 105 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.272502Jy sigma=0.001663 ! Fit after self-cal, rms=0.279900Jy sigma=0.001691 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.279900Jy sigma=0.001691 ! Fit after self-cal, rms=0.279889Jy sigma=0.001691 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.03 mas, bmaj=29.85 mas, bpa=-18.31 degrees ! Estimated noise=2962.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00352967 Jy ! Component: 100 - total flux cleaned = 0.00653494 Jy ! Component: 150 - total flux cleaned = 0.0077915 Jy ! Component: 200 - total flux cleaned = 0.0087692 Jy ! Total flux subtracted in 200 components = 0.0087692 Jy ! Clean residual min=-0.006993 max=0.011616 Jy/beam ! Clean residual mean=0.000395 rms=0.002798 Jy/beam ! Combined flux in latest and established models = 0.0318006 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 39 model components to the UV plane model. ! The established model now contains 180 components and 0.0318006 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.279700Jy sigma=0.001690 ! Fit after self-cal, rms=0.279679Jy sigma=0.001689 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.279679Jy sigma=0.001689 ! Fit after self-cal, rms=0.278689Jy sigma=0.001682 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00851971 Jy ! Component: 100 - total flux cleaned = 0.00977066 Jy ! Component: 150 - total flux cleaned = 0.0105953 Jy ! Component: 200 - total flux cleaned = 0.0110396 Jy ! Total flux subtracted in 200 components = 0.0110396 Jy ! Clean residual min=-0.010675 max=0.013659 Jy/beam ! Clean residual mean=0.000240 rms=0.003542 Jy/beam ! Combined flux in latest and established models = 0.0428401 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 46 model components to the UV plane model. ! The established model now contains 222 components and 0.0428401 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.278426Jy sigma=0.001680 ! Fit after self-cal, rms=0.278334Jy sigma=0.001678 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.03 x 29.85 at -18.31 degrees (North through East) ! Clean map min=-0.016161 max=0.023256 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.997 mas, bmaj=42.07 mas, bpa=-3.738 degrees ! Estimated noise=3757.31 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00158565 Jy ! Component: 100 - total flux cleaned = -0.00157257 Jy ! Component: 150 - total flux cleaned = -0.00142797 Jy ! Component: 200 - total flux cleaned = -0.000586224 Jy ! Total flux subtracted in 200 components = -0.000586224 Jy ! Clean residual min=-0.013517 max=0.012268 Jy/beam ! Clean residual mean=0.000160 rms=0.004617 Jy/beam ! Combined flux in latest and established models = 0.0422539 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 48 model components to the UV plane model. ! The established model now contains 266 components and 0.0422539 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.278177Jy sigma=0.001677 ! Fit after self-cal, rms=0.277782Jy sigma=0.001674 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.791 mas, bmaj=26.71 mas, bpa=-18.06 degrees ! Estimated noise=5633.88 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0468795 Jy ! Component: 100 - total flux cleaned = 0.0631076 Jy ! Component: 150 - total flux cleaned = 0.0690516 Jy ! Component: 200 - total flux cleaned = 0.0710197 Jy ! Total flux subtracted in 200 components = 0.0710197 Jy ! Clean residual min=-0.025336 max=0.025388 Jy/beam ! Clean residual mean=0.000360 rms=0.007195 Jy/beam ! Combined flux in latest and established models = 0.0710197 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 46 model components to the UV plane model. ! The established model now contains 46 components and 0.0710197 Jy ! Inverting map and beam ! Estimated beam: bmin=3.03 mas, bmaj=29.85 mas, bpa=-18.31 degrees ! Estimated noise=2962.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00132529 Jy ! Component: 100 - total flux cleaned = 0.00111383 Jy ! Component: 150 - total flux cleaned = 0.00244155 Jy ! Component: 200 - total flux cleaned = 0.00395152 Jy ! Total flux subtracted in 200 components = 0.00395152 Jy ! Clean residual min=-0.014553 max=0.015121 Jy/beam ! Clean residual mean=0.000355 rms=0.004497 Jy/beam ! Combined flux in latest and established models = 0.0749713 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 85 components and 0.0749713 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.997 mas, bmaj=42.07 mas, bpa=-3.738 degrees ! Estimated noise=3757.31 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 3.97502e-05 Jy ! Component: 100 - total flux cleaned = 0.000583077 Jy ! Component: 150 - total flux cleaned = 0.000963182 Jy ! Component: 200 - total flux cleaned = 0.0012976 Jy ! Total flux subtracted in 200 components = 0.0012976 Jy ! Clean residual min=-0.011513 max=0.016649 Jy/beam ! Clean residual mean=0.000579 rms=0.005453 Jy/beam ! Combined flux in latest and established models = 0.0762689 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 102 components and 0.0762689 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.03 mas, bmaj=29.85 mas, bpa=-18.31 degrees ! Estimated noise=2962.4 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000300066 Jy ! Component: 100 - total flux cleaned = 0.000517859 Jy ! Component: 150 - total flux cleaned = 0.000772056 Jy ! Component: 200 - total flux cleaned = 0.00120452 Jy ! Total flux subtracted in 200 components = 0.00120452 Jy ! Clean residual min=-0.014055 max=0.014512 Jy/beam ! Clean residual mean=0.000328 rms=0.004037 Jy/beam ! Combined flux in latest and established models = 0.0774734 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 35 model components to the UV plane model. ! The established model now contains 130 components and 0.0774734 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.278332Jy sigma=0.001679 ! Fit after self-cal, rms=0.278089Jy sigma=0.001677 wmodel J0905-3927_S_2002_01_31_yyk\_map.mod ! Writing 130 model components to file: J0905-3927_S_2002_01_31_yyk_map.mod wobs J0905-3927_S_2002_01_31_yyk\_uvs.fits ! Writing UV FITS file: J0905-3927_S_2002_01_31_yyk_uvs.fits wwins J0905-3927_S_2002_01_31_yyk\_map.win ! wwins: Wrote 1 windows to J0905-3927_S_2002_01_31_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00326314 Jy ! Component: 100 - total flux cleaned = 0.00529343 Jy ! Component: 150 - total flux cleaned = 0.00764366 Jy ! Component: 200 - total flux cleaned = 0.00978109 Jy ! Component: 250 - total flux cleaned = 0.0118814 Jy ! Component: 300 - total flux cleaned = 0.0139651 Jy ! Component: 350 - total flux cleaned = 0.0158161 Jy ! Component: 400 - total flux cleaned = 0.017766 Jy ! Component: 450 - total flux cleaned = 0.0195271 Jy ! Component: 500 - total flux cleaned = 0.0206585 Jy ! Component: 550 - total flux cleaned = 0.0213884 Jy ! Component: 600 - total flux cleaned = 0.022273 Jy ! Component: 650 - total flux cleaned = 0.0230453 Jy ! Component: 700 - total flux cleaned = 0.0237139 Jy ! Component: 750 - total flux cleaned = 0.0244454 Jy ! Component: 800 - total flux cleaned = 0.025079 Jy ! Component: 850 - total flux cleaned = 0.02562 Jy ! Component: 900 - total flux cleaned = 0.0262225 Jy ! Component: 950 - total flux cleaned = 0.026664 Jy ! Component: 1000 - total flux cleaned = 0.0270255 Jy ! Component: 1050 - total flux cleaned = 0.0272383 Jy ! Component: 1100 - total flux cleaned = 0.0275864 Jy ! Component: 1150 - total flux cleaned = 0.0278587 Jy ! Component: 1200 - total flux cleaned = 0.0281269 Jy ! Component: 1250 - total flux cleaned = 0.0281264 Jy ! Component: 1300 - total flux cleaned = 0.0282568 Jy ! Component: 1350 - total flux cleaned = 0.0283855 Jy ! Component: 1400 - total flux cleaned = 0.028449 Jy ! Component: 1450 - total flux cleaned = 0.0285751 Jy ! Component: 1500 - total flux cleaned = 0.0285756 Jy ! Component: 1550 - total flux cleaned = 0.0286997 Jy ! Component: 1600 - total flux cleaned = 0.0286381 Jy ! Component: 1650 - total flux cleaned = 0.0285772 Jy ! Component: 1700 - total flux cleaned = 0.0285169 Jy ! Component: 1750 - total flux cleaned = 0.0284562 Jy ! Component: 1800 - total flux cleaned = 0.028336 Jy ! Component: 1850 - total flux cleaned = 0.0281565 Jy ! Component: 1900 - total flux cleaned = 0.0279778 Jy ! Component: 1950 - total flux cleaned = 0.0277406 Jy ! Component: 2000 - total flux cleaned = 0.027622 Jy ! Total flux subtracted in 2048 components = 0.0273847 Jy ! Clean residual min=-0.003433 max=0.003666 Jy/beam ! Clean residual mean=-0.000024 rms=0.001264 Jy/beam ! Combined flux in latest and established models = 0.104858 Jy keep ! Adding 128 model components to the UV plane model. ! The established model now contains 258 components and 0.104858 Jy ![Exited script file: muppet] wmap "J0905-3927_S_2002_01_31_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.03 x 29.85 at -18.31 degrees (North through East) ! Clean map min=-0.026365 max=0.033975 Jy/beam ! Writing clean map to FITS file: J0905-3927_S_2002_01_31_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0339752 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00139674 device "J0905-3927_S_2002_01_31_yyk\_map.eps/VPS" ! Attempting to open device: 'J0905-3927_S_2002_01_31_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -12.3332 12.3332 24.6663 49.3327 98.6653 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0041 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.033 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.03 x 29.85 at -18.31 degrees (North through East) ! Clean map min=-0.026365 max=0.033975 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0905-3927_S_2002_01_31_yyk\_map.gif/gif" ! Attempting to open device: 'J0905-3927_S_2002_01_31_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0905-3927_S_2002_01_31_yyk_uvs.log closed on Tue Jun 26 22:35:31 2007