! Started logfile: J0904-3111_S_2002_05_14_yyk_uvs.log on Tue Jun 26 22:35:10 2007 obs J0904-3111_S_2002_05_14_yyk_uva.fits ! Reading UV FITS file: J0904-3111_S_2002_05_14_yyk_uva.fits ! AN table 1: 75 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.802963 visibilities/baseline/integration-bin. ! Found source: J0904-3111 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22947e+09 8e+06 1 8e+06 ! 02 2 2.25947e+09 8e+06 1 8e+06 ! 03 3 2.34947e+09 8e+06 1 8e+06 ! 04 4 2.36947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 10840 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0904-3111_S_2002_05_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.327799 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.578 mas, bmaj=6.963 mas, bpa=6.794 degrees ! Estimated noise=2376.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0355393 Jy ! Component: 100 - total flux cleaned = 0.049969 Jy ! Total flux subtracted in 100 components = 0.049969 Jy ! Clean residual min=-0.013394 max=0.018936 Jy/beam ! Clean residual mean=0.000029 rms=0.003862 Jy/beam ! Combined flux in latest and established models = 0.049969 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.049969 Jy ! ! Correcting IF 1. ! A total of 107 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 466 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 346 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 92 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.324058Jy sigma=0.001564 ! Fit after self-cal, rms=0.322655Jy sigma=0.001556 ! Inverting map and beam ! Estimated beam: bmin=2.578 mas, bmaj=6.963 mas, bpa=6.794 degrees ! Estimated noise=2376.41 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.505 mas, bmaj=9.368 mas, bpa=9.696 degrees ! Estimated noise=1522.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0245345 Jy ! Component: 100 - total flux cleaned = 0.0317995 Jy ! Component: 150 - total flux cleaned = 0.0335159 Jy ! Component: 200 - total flux cleaned = 0.0337441 Jy ! Total flux subtracted in 200 components = 0.0337441 Jy ! Clean residual min=-0.008060 max=0.007820 Jy/beam ! Clean residual mean=-0.000142 rms=0.002303 Jy/beam ! Combined flux in latest and established models = 0.0837131 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 36 components and 0.0837131 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.321626Jy sigma=0.001548 ! Fit after self-cal, rms=0.321595Jy sigma=0.001548 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.505 x 9.368 at 9.696 degrees (North through East) ! Clean map min=-0.007527 max=0.048914 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Correcting IF 2. ! A total of 24 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.00386 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 1.00* KP 1.00* ! LA 1.16 NL 1.00* OV 0.91 PT 1.00* ! SC 0.86 MK 1.00* ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Fit before self-cal, rms=0.321595Jy sigma=0.001548 ! Fit after self-cal, rms=0.321103Jy sigma=0.001547 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.321103Jy sigma=0.001547 ! Fit after self-cal, rms=0.321111Jy sigma=0.001547 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.465 mas, bmaj=9.32 mas, bpa=10.08 degrees ! Estimated noise=1522.44 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00114172 Jy ! Component: 100 - total flux cleaned = 0.0012276 Jy ! Component: 150 - total flux cleaned = 0.00130319 Jy ! Component: 200 - total flux cleaned = 0.00130143 Jy ! Total flux subtracted in 200 components = 0.00130143 Jy ! Clean residual min=-0.007463 max=0.007180 Jy/beam ! Clean residual mean=-0.000141 rms=0.002241 Jy/beam ! Combined flux in latest and established models = 0.0850146 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 40 components and 0.0850146 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.321065Jy sigma=0.001547 ! Fit after self-cal, rms=0.321053Jy sigma=0.001547 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.321053Jy sigma=0.001547 ! Fit after self-cal, rms=0.318873Jy sigma=0.001533 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00884335 Jy ! Component: 100 - total flux cleaned = 0.00948166 Jy ! Component: 150 - total flux cleaned = 0.00987743 Jy ! Component: 200 - total flux cleaned = 0.0102119 Jy ! Total flux subtracted in 200 components = 0.0102119 Jy ! Clean residual min=-0.008081 max=0.007486 Jy/beam ! Clean residual mean=-0.000125 rms=0.002153 Jy/beam ! Combined flux in latest and established models = 0.0952264 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 50 components and 0.0952264 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.318589Jy sigma=0.001531 ! Fit after self-cal, rms=0.318025Jy sigma=0.001528 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.465 x 9.32 at 10.08 degrees (North through East) ! Clean map min=-0.0075976 max=0.059676 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.517 mas, bmaj=26.7 mas, bpa=10.88 degrees ! Estimated noise=1843.39 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00217404 Jy ! Component: 100 - total flux cleaned = 0.00217592 Jy ! Component: 150 - total flux cleaned = 0.00210981 Jy ! Component: 200 - total flux cleaned = 0.00206636 Jy ! Total flux subtracted in 200 components = 0.00206636 Jy ! Clean residual min=-0.007766 max=0.006496 Jy/beam ! Clean residual mean=-0.000226 rms=0.002394 Jy/beam ! Combined flux in latest and established models = 0.0972928 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 5 model components to the UV plane model. ! The established model now contains 53 components and 0.0972928 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.318001Jy sigma=0.001527 ! Fit after self-cal, rms=0.317862Jy sigma=0.001526 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.573 mas, bmaj=6.958 mas, bpa=6.974 degrees ! Estimated noise=2365.56 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0589497 Jy ! Component: 100 - total flux cleaned = 0.082294 Jy ! Component: 150 - total flux cleaned = 0.0932681 Jy ! Component: 200 - total flux cleaned = 0.0957754 Jy ! Total flux subtracted in 200 components = 0.0957754 Jy ! Clean residual min=-0.012994 max=0.013191 Jy/beam ! Clean residual mean=-0.000083 rms=0.003329 Jy/beam ! Combined flux in latest and established models = 0.0957754 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.0957754 Jy ! Inverting map and beam ! Estimated beam: bmin=3.465 mas, bmaj=9.32 mas, bpa=10.08 degrees ! Estimated noise=1522.44 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00169195 Jy ! Component: 100 - total flux cleaned = 0.00168125 Jy ! Component: 150 - total flux cleaned = 0.00167824 Jy ! Component: 200 - total flux cleaned = 0.00176061 Jy ! Total flux subtracted in 200 components = 0.00176061 Jy ! Clean residual min=-0.007857 max=0.007674 Jy/beam ! Clean residual mean=-0.000131 rms=0.002063 Jy/beam ! Combined flux in latest and established models = 0.097536 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 39 components and 0.097536 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.517 mas, bmaj=26.7 mas, bpa=10.88 degrees ! Estimated noise=1843.39 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000195688 Jy ! Component: 100 - total flux cleaned = -0.00020935 Jy ! Component: 150 - total flux cleaned = -0.000222278 Jy ! Component: 200 - total flux cleaned = -0.000235609 Jy ! Total flux subtracted in 200 components = -0.000235609 Jy ! Clean residual min=-0.008384 max=0.006360 Jy/beam ! Clean residual mean=-0.000234 rms=0.002437 Jy/beam ! Combined flux in latest and established models = 0.0973004 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 44 components and 0.0973004 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.465 mas, bmaj=9.32 mas, bpa=10.08 degrees ! Estimated noise=1522.44 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000193897 Jy ! Component: 100 - total flux cleaned = 0.000271786 Jy ! Component: 150 - total flux cleaned = 0.000339084 Jy ! Component: 200 - total flux cleaned = 0.00034247 Jy ! Total flux subtracted in 200 components = 0.00034247 Jy ! Clean residual min=-0.007864 max=0.007587 Jy/beam ! Clean residual mean=-0.000131 rms=0.002054 Jy/beam ! Combined flux in latest and established models = 0.0976428 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 48 components and 0.0976428 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.317814Jy sigma=0.001526 ! Fit after self-cal, rms=0.317629Jy sigma=0.001525 wmodel J0904-3111_S_2002_05_14_yyk\_map.mod ! Writing 48 model components to file: J0904-3111_S_2002_05_14_yyk_map.mod wobs J0904-3111_S_2002_05_14_yyk\_uvs.fits ! Writing UV FITS file: J0904-3111_S_2002_05_14_yyk_uvs.fits wwins J0904-3111_S_2002_05_14_yyk\_map.win ! wwins: Wrote 1 windows to J0904-3111_S_2002_05_14_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0014886 Jy ! Component: 100 - total flux cleaned = -0.00246202 Jy ! Component: 150 - total flux cleaned = -0.00335422 Jy ! Component: 200 - total flux cleaned = -0.00366987 Jy ! Component: 250 - total flux cleaned = -0.00356765 Jy ! Component: 300 - total flux cleaned = -0.00356711 Jy ! Component: 350 - total flux cleaned = -0.00365947 Jy ! Component: 400 - total flux cleaned = -0.00365657 Jy ! Component: 450 - total flux cleaned = -0.00383008 Jy ! Component: 500 - total flux cleaned = -0.0040835 Jy ! Component: 550 - total flux cleaned = -0.00432879 Jy ! Component: 600 - total flux cleaned = -0.00464769 Jy ! Component: 650 - total flux cleaned = -0.00503861 Jy ! Component: 700 - total flux cleaned = -0.00534442 Jy ! Component: 750 - total flux cleaned = -0.00564361 Jy ! Component: 800 - total flux cleaned = -0.00579101 Jy ! Component: 850 - total flux cleaned = -0.00607862 Jy ! Component: 900 - total flux cleaned = -0.00636138 Jy ! Component: 950 - total flux cleaned = -0.00684551 Jy ! Component: 1000 - total flux cleaned = -0.00698121 Jy ! Component: 1050 - total flux cleaned = -0.00731611 Jy ! Component: 1100 - total flux cleaned = -0.00751445 Jy ! Component: 1150 - total flux cleaned = -0.00777445 Jy ! Component: 1200 - total flux cleaned = -0.00796642 Jy ! Component: 1250 - total flux cleaned = -0.00821792 Jy ! Component: 1300 - total flux cleaned = -0.00834124 Jy ! Component: 1350 - total flux cleaned = -0.00852507 Jy ! Component: 1400 - total flux cleaned = -0.0087664 Jy ! Component: 1450 - total flux cleaned = -0.00894431 Jy ! Component: 1500 - total flux cleaned = -0.00900361 Jy ! Component: 1550 - total flux cleaned = -0.00929343 Jy ! Component: 1600 - total flux cleaned = -0.00963544 Jy ! Component: 1650 - total flux cleaned = -0.00957994 Jy ! Component: 1700 - total flux cleaned = -0.00980357 Jy ! Component: 1750 - total flux cleaned = -0.00996902 Jy ! Component: 1800 - total flux cleaned = -0.010024 Jy ! Component: 1850 - total flux cleaned = -0.0102389 Jy ! Component: 1900 - total flux cleaned = -0.0103977 Jy ! Component: 1950 - total flux cleaned = -0.0102923 Jy ! Component: 2000 - total flux cleaned = -0.0104481 Jy ! Total flux subtracted in 2048 components = -0.0103454 Jy ! Clean residual min=-0.002848 max=0.002969 Jy/beam ! Clean residual mean=-0.000075 rms=0.001040 Jy/beam ! Combined flux in latest and established models = 0.0872974 Jy keep ! Adding 107 model components to the UV plane model. ! The established model now contains 155 components and 0.0872974 Jy ![Exited script file: muppet] wmap "J0904-3111_S_2002_05_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.465 x 9.32 at 10.08 degrees (North through East) ! Clean map min=-0.0062316 max=0.062946 Jy/beam ! Writing clean map to FITS file: J0904-3111_S_2002_05_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0629457 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00104571 device "J0904-3111_S_2002_05_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J0904-3111_S_2002_05_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -4.98388 4.98388 9.96776 19.9355 39.871 79.7421 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0031 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.062 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.465 x 9.32 at 10.08 degrees (North through East) ! Clean map min=-0.0062316 max=0.062946 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0904-3111_S_2002_05_14_yyk\_map.gif/gif" ! Attempting to open device: 'J0904-3111_S_2002_05_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0904-3111_S_2002_05_14_yyk_uvs.log closed on Tue Jun 26 22:35:16 2007