! Started logfile: J0900-3131_X_2002_01_31_yyk_uvs.log on Wed Jun 27 10:53:52 2007 obs J0900-3131_X_2002_01_31_yyk_uva.fits ! Reading UV FITS file: J0900-3131_X_2002_01_31_yyk_uva.fits ! AN table 1: 71 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.792801 visibilities/baseline/integration-bin. ! Found source: J0900-3131 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40947e+09 8e+06 1 8e+06 ! 02 2 8.47947e+09 8e+06 1 8e+06 ! 03 3 8.79447e+09 8e+06 1 8e+06 ! 04 4 8.89947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1544 lines of history. ! ! Reading 10132 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 flag NL ! Flagging baselines of antenna 1:NL in the currently selected channels. ![@muppet J0900-3131_X_2002_01_31_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.194151 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6336 mas, bmaj=1.623 mas, bpa=5.138 degrees ! Estimated noise=1436.39 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.103439 Jy ! Component: 100 - total flux cleaned = 0.125397 Jy ! Total flux subtracted in 100 components = 0.125397 Jy ! Clean residual min=-0.007932 max=0.009146 Jy/beam ! Clean residual mean=-0.000021 rms=0.002131 Jy/beam ! Combined flux in latest and established models = 0.125397 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.125397 Jy ! ! Correcting IF 1. ! A total of 145 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 145 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 145 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 145 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.148062Jy sigma=0.001198 ! Fit after self-cal, rms=0.146253Jy sigma=0.001187 ! Inverting map and beam ! Estimated beam: bmin=0.6336 mas, bmaj=1.623 mas, bpa=5.138 degrees ! Estimated noise=1436.39 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8514 mas, bmaj=2.102 mas, bpa=2.93 degrees ! Estimated noise=921.66 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0109229 Jy ! Component: 100 - total flux cleaned = 0.0134245 Jy ! Component: 150 - total flux cleaned = 0.0135977 Jy ! Component: 200 - total flux cleaned = 0.0136984 Jy ! Total flux subtracted in 200 components = 0.0136984 Jy ! Clean residual min=-0.007871 max=0.006259 Jy/beam ! Clean residual mean=-0.000032 rms=0.001716 Jy/beam ! Combined flux in latest and established models = 0.139096 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 23 components and 0.139096 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145732Jy sigma=0.001182 ! Fit after self-cal, rms=0.145732Jy sigma=0.001182 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8514 x 2.102 at 2.93 degrees (North through East) ! Clean map min=-0.0073531 max=0.12637 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01606 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.86 HN 1.00* KP 1.03 ! LA 1.11 MK 0.90 NL 1.00* OV 0.95 ! PT 0.99 SC 1.01 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.01058 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.92 HN 1.00* KP 0.98 ! LA 1.18 MK 1.00 NL 1.00* OV 0.88 ! PT 1.01 SC 0.98 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.145732Jy sigma=0.001182 ! Fit after self-cal, rms=0.145249Jy sigma=0.001179 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145249Jy sigma=0.001179 ! Fit after self-cal, rms=0.145249Jy sigma=0.001179 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8468 mas, bmaj=2.096 mas, bpa=2.409 degrees ! Estimated noise=911.041 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000298344 Jy ! Component: 100 - total flux cleaned = -0.000370237 Jy ! Component: 150 - total flux cleaned = -0.000371643 Jy ! Component: 200 - total flux cleaned = -0.000405813 Jy ! Total flux subtracted in 200 components = -0.000405813 Jy ! Clean residual min=-0.005787 max=0.004632 Jy/beam ! Clean residual mean=-0.000015 rms=0.001200 Jy/beam ! Combined flux in latest and established models = 0.13869 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 26 components and 0.13869 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145230Jy sigma=0.001178 ! Fit after self-cal, rms=0.145230Jy sigma=0.001178 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145230Jy sigma=0.001178 ! Fit after self-cal, rms=0.143683Jy sigma=0.001167 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000835862 Jy ! Component: 100 - total flux cleaned = 0.00079517 Jy ! Component: 150 - total flux cleaned = 0.000722395 Jy ! Component: 200 - total flux cleaned = 0.000690196 Jy ! Total flux subtracted in 200 components = 0.000690196 Jy ! Clean residual min=-0.005512 max=0.004291 Jy/beam ! Clean residual mean=-0.000014 rms=0.001173 Jy/beam ! Combined flux in latest and established models = 0.13938 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 28 components and 0.13938 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143660Jy sigma=0.001167 ! Fit after self-cal, rms=0.143485Jy sigma=0.001165 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8468 x 2.096 at 2.409 degrees (North through East) ! Clean map min=-0.0050694 max=0.12764 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143485Jy sigma=0.001165 ! Fit after self-cal, rms=0.141484Jy sigma=0.001165 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141484Jy sigma=0.001165 ! Fit after self-cal, rms=0.141446Jy sigma=0.001164 ! Inverting map and beam ! Estimated beam: bmin=0.8467 mas, bmaj=2.096 mas, bpa=2.467 degrees ! Estimated noise=895.37 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00189655 Jy ! Component: 100 - total flux cleaned = -0.00221163 Jy ! Component: 150 - total flux cleaned = -0.00226916 Jy ! Component: 200 - total flux cleaned = -0.00232377 Jy ! Total flux subtracted in 200 components = -0.00232377 Jy ! Clean residual min=-0.005215 max=0.003885 Jy/beam ! Clean residual mean=-0.000011 rms=0.001112 Jy/beam ! Combined flux in latest and established models = 0.137056 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 31 components and 0.137056 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141430Jy sigma=0.001164 ! Fit after self-cal, rms=0.141427Jy sigma=0.001164 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141427Jy sigma=0.001164 ! Fit after self-cal, rms=0.141690Jy sigma=0.001163 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141690Jy sigma=0.001163 ! Fit after self-cal, rms=0.141695Jy sigma=0.001163 ! Inverting map and beam ! Estimated beam: bmin=0.837 mas, bmaj=2.058 mas, bpa=2.338 degrees ! Estimated noise=892.921 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000760353 Jy ! Component: 100 - total flux cleaned = 0.000759269 Jy ! Component: 150 - total flux cleaned = 0.000726209 Jy ! Component: 200 - total flux cleaned = 0.000724243 Jy ! Total flux subtracted in 200 components = 0.000724243 Jy ! Clean residual min=-0.004583 max=0.004094 Jy/beam ! Clean residual mean=-0.000031 rms=0.001062 Jy/beam ! Combined flux in latest and established models = 0.137781 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 32 components and 0.137781 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141680Jy sigma=0.001163 ! Fit after self-cal, rms=0.141688Jy sigma=0.001163 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.882 mas, bmaj=7.941 mas, bpa=12.59 degrees ! Estimated noise=1158.7 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00041117 Jy ! Component: 100 - total flux cleaned = -0.000479606 Jy ! Component: 150 - total flux cleaned = -0.000545459 Jy ! Component: 200 - total flux cleaned = -0.000576193 Jy ! Total flux subtracted in 200 components = -0.000576193 Jy ! Clean residual min=-0.004563 max=0.004758 Jy/beam ! Clean residual mean=-0.000061 rms=0.001376 Jy/beam ! Combined flux in latest and established models = 0.137204 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 3 model components to the UV plane model. ! The established model now contains 33 components and 0.137204 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141686Jy sigma=0.001163 ! Fit after self-cal, rms=0.141692Jy sigma=0.001163 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6319 mas, bmaj=1.604 mas, bpa=4.69 degrees ! Estimated noise=1394.56 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.104222 Jy ! Component: 100 - total flux cleaned = 0.124785 Jy ! Component: 150 - total flux cleaned = 0.132072 Jy ! Component: 200 - total flux cleaned = 0.135494 Jy ! Total flux subtracted in 200 components = 0.135494 Jy ! Clean residual min=-0.006350 max=0.005898 Jy/beam ! Clean residual mean=-0.000012 rms=0.001603 Jy/beam ! Combined flux in latest and established models = 0.135494 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.135494 Jy ! Inverting map and beam ! Estimated beam: bmin=0.837 mas, bmaj=2.058 mas, bpa=2.338 degrees ! Estimated noise=892.921 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00252795 Jy ! Component: 100 - total flux cleaned = 0.00271688 Jy ! Component: 150 - total flux cleaned = 0.00277296 Jy ! Component: 200 - total flux cleaned = 0.0028211 Jy ! Total flux subtracted in 200 components = 0.0028211 Jy ! Clean residual min=-0.004656 max=0.004208 Jy/beam ! Clean residual mean=-0.000030 rms=0.001088 Jy/beam ! Combined flux in latest and established models = 0.138315 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 20 components and 0.138315 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.882 mas, bmaj=7.941 mas, bpa=12.59 degrees ! Estimated noise=1158.7 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00051718 Jy ! Component: 100 - total flux cleaned = -0.0005982 Jy ! Component: 150 - total flux cleaned = -0.000674054 Jy ! Component: 200 - total flux cleaned = -0.000746675 Jy ! Total flux subtracted in 200 components = -0.000746675 Jy ! Clean residual min=-0.004594 max=0.004794 Jy/beam ! Clean residual mean=-0.000060 rms=0.001394 Jy/beam ! Combined flux in latest and established models = 0.137568 Jy ! Adding 4 model components to the UV plane model. ! The established model now contains 22 components and 0.137568 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.837 mas, bmaj=2.058 mas, bpa=2.338 degrees ! Estimated noise=892.921 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000401264 Jy ! Component: 100 - total flux cleaned = 0.00045792 Jy ! Component: 150 - total flux cleaned = 0.00054166 Jy ! Component: 200 - total flux cleaned = 0.000613696 Jy ! Total flux subtracted in 200 components = 0.000613696 Jy ! Clean residual min=-0.004589 max=0.004206 Jy/beam ! Clean residual mean=-0.000031 rms=0.001075 Jy/beam ! Combined flux in latest and established models = 0.138182 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 28 components and 0.138182 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141730Jy sigma=0.001163 ! Fit after self-cal, rms=0.141725Jy sigma=0.001163 wmodel J0900-3131_X_2002_01_31_yyk\_map.mod ! Writing 28 model components to file: J0900-3131_X_2002_01_31_yyk_map.mod wobs J0900-3131_X_2002_01_31_yyk\_uvs.fits ! Applying 71 buffered edits. ! Writing UV FITS file: J0900-3131_X_2002_01_31_yyk_uvs.fits wwins J0900-3131_X_2002_01_31_yyk\_map.win ! wwins: Wrote 1 windows to J0900-3131_X_2002_01_31_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00097812 Jy ! Component: 100 - total flux cleaned = -0.000983902 Jy ! Component: 150 - total flux cleaned = -0.0014776 Jy ! Component: 200 - total flux cleaned = -0.00211522 Jy ! Component: 250 - total flux cleaned = -0.0027222 Jy ! Component: 300 - total flux cleaned = -0.00319867 Jy ! Component: 350 - total flux cleaned = -0.00370551 Jy ! Component: 400 - total flux cleaned = -0.00404699 Jy ! Component: 450 - total flux cleaned = -0.00423482 Jy ! Component: 500 - total flux cleaned = -0.00437129 Jy ! Component: 550 - total flux cleaned = -0.00463765 Jy ! Component: 600 - total flux cleaned = -0.00468095 Jy ! Component: 650 - total flux cleaned = -0.00484905 Jy ! Component: 700 - total flux cleaned = -0.00472539 Jy ! Component: 750 - total flux cleaned = -0.00480656 Jy ! Component: 800 - total flux cleaned = -0.00476785 Jy ! Component: 850 - total flux cleaned = -0.00484641 Jy ! Component: 900 - total flux cleaned = -0.00492241 Jy ! Component: 950 - total flux cleaned = -0.00492256 Jy ! Component: 1000 - total flux cleaned = -0.00492365 Jy ! Component: 1050 - total flux cleaned = -0.00506751 Jy ! Component: 1100 - total flux cleaned = -0.00513822 Jy ! Component: 1150 - total flux cleaned = -0.00538103 Jy ! Component: 1200 - total flux cleaned = -0.00551768 Jy ! Component: 1250 - total flux cleaned = -0.0056859 Jy ! Component: 1300 - total flux cleaned = -0.00591806 Jy ! Component: 1350 - total flux cleaned = -0.00608127 Jy ! Component: 1400 - total flux cleaned = -0.00627421 Jy ! Component: 1450 - total flux cleaned = -0.00630618 Jy ! Component: 1500 - total flux cleaned = -0.00643144 Jy ! Component: 1550 - total flux cleaned = -0.00658564 Jy ! Component: 1600 - total flux cleaned = -0.00670672 Jy ! Component: 1650 - total flux cleaned = -0.00679657 Jy ! Component: 1700 - total flux cleaned = -0.00685615 Jy ! Component: 1750 - total flux cleaned = -0.00697396 Jy ! Component: 1800 - total flux cleaned = -0.0070902 Jy ! Component: 1850 - total flux cleaned = -0.00720545 Jy ! Component: 1900 - total flux cleaned = -0.00726198 Jy ! Component: 1950 - total flux cleaned = -0.00731846 Jy ! Component: 2000 - total flux cleaned = -0.00742954 Jy ! Total flux subtracted in 2048 components = -0.00742968 Jy ! Clean residual min=-0.001534 max=0.001910 Jy/beam ! Clean residual mean=-0.000031 rms=0.000504 Jy/beam ! Combined flux in latest and established models = 0.130752 Jy keep ! Adding 128 model components to the UV plane model. ! The established model now contains 156 components and 0.130752 Jy ![Exited script file: muppet] wmap "J0900-3131_X_2002_01_31_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.837 x 2.058 at 2.338 degrees (North through East) ! Clean map min=-0.0026719 max=0.12456 Jy/beam ! Writing clean map to FITS file: J0900-3131_X_2002_01_31_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.124565 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000497736 device "J0900-3131_X_2002_01_31_yyk\_map.eps/VPS" ! Attempting to open device: 'J0900-3131_X_2002_01_31_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.19874 1.19874 2.39748 4.79495 9.58991 19.1798 38.3596 76.7192 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.124 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.837 x 2.058 at 2.338 degrees (North through East) ! Clean map min=-0.0026719 max=0.12456 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0900-3131_X_2002_01_31_yyk\_map.gif/gif" ! Attempting to open device: 'J0900-3131_X_2002_01_31_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0900-3131_X_2002_01_31_yyk_uvs.log closed on Wed Jun 27 10:54:08 2007