! Started logfile: J0859-3309_X_2002_01_31_yyk_uvs.log on Wed Jun 27 10:53:46 2007 obs J0859-3309_X_2002_01_31_yyk_uva.fits ! Reading UV FITS file: J0859-3309_X_2002_01_31_yyk_uva.fits ! AN table 1: 68 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.70098 visibilities/baseline/integration-bin. ! Found source: J0859-3309 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40947e+09 8e+06 1 8e+06 ! 02 2 8.47947e+09 8e+06 1 8e+06 ! 03 3 8.79447e+09 8e+06 1 8e+06 ! 04 4 8.89947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1545 lines of history. ! ! Reading 8580 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 flag NL ! Flagging baselines of antenna 1:NL in the currently selected channels. ![@muppet J0859-3309_X_2002_01_31_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.209295 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6501 mas, bmaj=1.659 mas, bpa=3.344 degrees ! Estimated noise=1624.15 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.2, -0.2). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0319891 Jy ! Component: 100 - total flux cleaned = 0.0438003 Jy ! Total flux subtracted in 100 components = 0.0438003 Jy ! Clean residual min=-0.011188 max=0.012191 Jy/beam ! Clean residual mean=0.000031 rms=0.002949 Jy/beam ! Combined flux in latest and established models = 0.0438003 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0438003 Jy ! ! Correcting IF 1. ! A total of 175 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 175 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 279 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 175 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.205688Jy sigma=0.001603 ! Fit after self-cal, rms=0.204353Jy sigma=0.001592 ! Inverting map and beam ! Estimated beam: bmin=0.6501 mas, bmaj=1.659 mas, bpa=3.344 degrees ! Estimated noise=1625.43 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8926 mas, bmaj=2.328 mas, bpa=5.732 degrees ! Estimated noise=1045.55 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0137322 Jy ! Component: 100 - total flux cleaned = 0.0172846 Jy ! Component: 150 - total flux cleaned = 0.01742 Jy ! Component: 200 - total flux cleaned = 0.0174099 Jy ! Total flux subtracted in 200 components = 0.0174099 Jy ! Clean residual min=-0.008697 max=0.008969 Jy/beam ! Clean residual mean=0.000086 rms=0.002275 Jy/beam ! Combined flux in latest and established models = 0.0612102 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 21 components and 0.0612102 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.203875Jy sigma=0.001586 ! Fit after self-cal, rms=0.203838Jy sigma=0.001586 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8926 x 2.328 at 5.732 degrees (North through East) ! Clean map min=-0.0079774 max=0.039085 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.203838Jy sigma=0.001586 ! Fit after self-cal, rms=0.203838Jy sigma=0.001586 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.203838Jy sigma=0.001586 ! Fit after self-cal, rms=0.203838Jy sigma=0.001586 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8926 mas, bmaj=2.328 mas, bpa=5.732 degrees ! Estimated noise=1045.55 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000293749 Jy ! Component: 100 - total flux cleaned = 0.000204776 Jy ! Component: 150 - total flux cleaned = 0.000201295 Jy ! Component: 200 - total flux cleaned = 0.000262195 Jy ! Total flux subtracted in 200 components = 0.000262195 Jy ! Clean residual min=-0.008634 max=0.008796 Jy/beam ! Clean residual mean=0.000087 rms=0.002257 Jy/beam ! Combined flux in latest and established models = 0.0614724 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 27 components and 0.0614724 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.203787Jy sigma=0.001586 ! Fit after self-cal, rms=0.203771Jy sigma=0.001586 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.203771Jy sigma=0.001586 ! Fit after self-cal, rms=0.202138Jy sigma=0.001573 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00515493 Jy ! Component: 100 - total flux cleaned = 0.00539772 Jy ! Component: 150 - total flux cleaned = 0.0052774 Jy ! Component: 200 - total flux cleaned = 0.00527992 Jy ! Total flux subtracted in 200 components = 0.00527992 Jy ! Clean residual min=-0.009579 max=0.008391 Jy/beam ! Clean residual mean=0.000115 rms=0.002180 Jy/beam ! Combined flux in latest and established models = 0.0667523 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 30 components and 0.0667523 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.201938Jy sigma=0.001571 ! Fit after self-cal, rms=0.201534Jy sigma=0.001568 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8926 x 2.328 at 5.732 degrees (North through East) ! Clean map min=-0.0081052 max=0.04343 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.078 mas, bmaj=9.246 mas, bpa=11.08 degrees ! Estimated noise=1300.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00183767 Jy ! Component: 100 - total flux cleaned = 0.00193712 Jy ! Component: 150 - total flux cleaned = 0.00194032 Jy ! Component: 200 - total flux cleaned = 0.00193949 Jy ! Total flux subtracted in 200 components = 0.00193949 Jy ! Clean residual min=-0.008451 max=0.009376 Jy/beam ! Clean residual mean=0.000178 rms=0.002820 Jy/beam ! Combined flux in latest and established models = 0.0686918 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 34 components and 0.0686918 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.201554Jy sigma=0.001568 ! Fit after self-cal, rms=0.201429Jy sigma=0.001567 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6501 mas, bmaj=1.659 mas, bpa=3.344 degrees ! Estimated noise=1625.43 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0462219 Jy ! Component: 100 - total flux cleaned = 0.0617542 Jy ! Component: 150 - total flux cleaned = 0.0643229 Jy ! Component: 200 - total flux cleaned = 0.0650096 Jy ! Total flux subtracted in 200 components = 0.0650095 Jy ! Clean residual min=-0.009445 max=0.011245 Jy/beam ! Clean residual mean=0.000062 rms=0.002493 Jy/beam ! Combined flux in latest and established models = 0.0650096 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0650096 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8926 mas, bmaj=2.328 mas, bpa=5.732 degrees ! Estimated noise=1045.55 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.6, 6.8). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00936249 Jy ! Component: 100 - total flux cleaned = 0.0107852 Jy ! Component: 150 - total flux cleaned = 0.0113474 Jy ! Component: 200 - total flux cleaned = 0.0115926 Jy ! Total flux subtracted in 200 components = 0.0115926 Jy ! Clean residual min=-0.007541 max=0.008249 Jy/beam ! Clean residual mean=0.000111 rms=0.001881 Jy/beam ! Combined flux in latest and established models = 0.0766021 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 34 components and 0.0766021 Jy ! Inverting map ! Added new window around map position (-4.2, -8). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00874205 Jy ! Component: 100 - total flux cleaned = 0.00926733 Jy ! Component: 150 - total flux cleaned = 0.00938161 Jy ! Component: 200 - total flux cleaned = 0.00959421 Jy ! Total flux subtracted in 200 components = 0.00959421 Jy ! Clean residual min=-0.007049 max=0.006583 Jy/beam ! Clean residual mean=0.000120 rms=0.001599 Jy/beam ! Combined flux in latest and established models = 0.0861964 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 58 components and 0.0861964 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.078 mas, bmaj=9.246 mas, bpa=11.08 degrees ! Estimated noise=1300.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00034328 Jy ! Component: 100 - total flux cleaned = 0.000439634 Jy ! Component: 150 - total flux cleaned = 0.000467689 Jy ! Component: 200 - total flux cleaned = 0.000466925 Jy ! Total flux subtracted in 200 components = 0.000466925 Jy ! Clean residual min=-0.006603 max=0.006517 Jy/beam ! Clean residual mean=0.000210 rms=0.002009 Jy/beam ! Combined flux in latest and established models = 0.0866633 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 66 components and 0.0866633 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8926 mas, bmaj=2.328 mas, bpa=5.732 degrees ! Estimated noise=1045.55 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000118126 Jy ! Component: 100 - total flux cleaned = -0.000116061 Jy ! Component: 150 - total flux cleaned = -0.00011538 Jy ! Component: 200 - total flux cleaned = -3.48831e-05 Jy ! Total flux subtracted in 200 components = -3.48831e-05 Jy ! Clean residual min=-0.006812 max=0.006568 Jy/beam ! Clean residual mean=0.000123 rms=0.001578 Jy/beam ! Combined flux in latest and established models = 0.0866284 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 76 components and 0.0866284 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.200581Jy sigma=0.001561 ! Fit after self-cal, rms=0.200438Jy sigma=0.001559 wmodel J0859-3309_X_2002_01_31_yyk\_map.mod ! Writing 76 model components to file: J0859-3309_X_2002_01_31_yyk_map.mod wobs J0859-3309_X_2002_01_31_yyk\_uvs.fits ! Applying 68 buffered edits. ! Writing UV FITS file: J0859-3309_X_2002_01_31_yyk_uvs.fits wwins J0859-3309_X_2002_01_31_yyk\_map.win ! wwins: Wrote 3 windows to J0859-3309_X_2002_01_31_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000653329 Jy ! Component: 100 - total flux cleaned = 0.00224807 Jy ! Component: 150 - total flux cleaned = 0.00361918 Jy ! Component: 200 - total flux cleaned = 0.00480521 Jy ! Component: 250 - total flux cleaned = 0.00591132 Jy ! Component: 300 - total flux cleaned = 0.00663036 Jy ! Component: 350 - total flux cleaned = 0.00700957 Jy ! Component: 400 - total flux cleaned = 0.00729836 Jy ! Component: 450 - total flux cleaned = 0.00750715 Jy ! Component: 500 - total flux cleaned = 0.00784221 Jy ! Component: 550 - total flux cleaned = 0.00836394 Jy ! Component: 600 - total flux cleaned = 0.00893526 Jy ! Component: 650 - total flux cleaned = 0.00936749 Jy ! Component: 700 - total flux cleaned = 0.00978967 Jy ! Component: 750 - total flux cleaned = 0.0102023 Jy ! Component: 800 - total flux cleaned = 0.0106044 Jy ! Component: 850 - total flux cleaned = 0.0109978 Jy ! Component: 900 - total flux cleaned = 0.0114927 Jy ! Component: 950 - total flux cleaned = 0.0118152 Jy ! Component: 1000 - total flux cleaned = 0.0120275 Jy ! Component: 1050 - total flux cleaned = 0.0122864 Jy ! Component: 1100 - total flux cleaned = 0.0123394 Jy ! Component: 1150 - total flux cleaned = 0.0127405 Jy ! Component: 1200 - total flux cleaned = 0.012888 Jy ! Component: 1250 - total flux cleaned = 0.013227 Jy ! Component: 1300 - total flux cleaned = 0.0135587 Jy ! Component: 1350 - total flux cleaned = 0.01384 Jy ! Component: 1400 - total flux cleaned = 0.0142547 Jy ! Component: 1450 - total flux cleaned = 0.0147079 Jy ! Component: 1500 - total flux cleaned = 0.0149313 Jy ! Component: 1550 - total flux cleaned = 0.0153277 Jy ! Component: 1600 - total flux cleaned = 0.0156751 Jy ! Component: 1650 - total flux cleaned = 0.0160596 Jy ! Component: 1700 - total flux cleaned = 0.016524 Jy ! Component: 1750 - total flux cleaned = 0.0166906 Jy ! Component: 1800 - total flux cleaned = 0.0171446 Jy ! Component: 1850 - total flux cleaned = 0.0174706 Jy ! Component: 1900 - total flux cleaned = 0.0177525 Jy ! Component: 1950 - total flux cleaned = 0.0180712 Jy ! Component: 2000 - total flux cleaned = 0.0183857 Jy ! Total flux subtracted in 2048 components = 0.0186187 Jy ! Clean residual min=-0.002159 max=0.002205 Jy/beam ! Clean residual mean=0.000083 rms=0.000695 Jy/beam ! Combined flux in latest and established models = 0.105247 Jy keep ! Adding 102 model components to the UV plane model. ! The established model now contains 177 components and 0.105247 Jy ![Exited script file: muppet] wmap "J0859-3309_X_2002_01_31_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8926 x 2.328 at 5.732 degrees (North through East) ! Clean map min=-0.0039888 max=0.045933 Jy/beam ! Writing clean map to FITS file: J0859-3309_X_2002_01_31_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0459335 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000694017 device "J0859-3309_X_2002_01_31_yyk\_map.eps/VPS" ! Attempting to open device: 'J0859-3309_X_2002_01_31_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -4.53275 4.53275 9.0655 18.131 36.262 72.524 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.002 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.045 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8926 x 2.328 at 5.732 degrees (North through East) ! Clean map min=-0.0039888 max=0.045933 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0859-3309_X_2002_01_31_yyk\_map.gif/gif" ! Attempting to open device: 'J0859-3309_X_2002_01_31_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0859-3309_X_2002_01_31_yyk_uvs.log closed on Wed Jun 27 10:53:52 2007