! Started logfile: J0859-3309_S_2002_01_31_yyk_uvs.log on Tue Jun 26 22:34:28 2007
obs J0859-3309_S_2002_01_31_yyk_uva.fits
! Reading UV FITS file: J0859-3309_S_2002_01_31_yyk_uva.fits
! AN table 1: 67 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.245108 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J0859-3309
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.22947e+09        8e+06          1        8e+06
!  02        2  2.25947e+09        8e+06          1        8e+06
!  03        3  2.34947e+09        8e+06          1        8e+06
!  04        4  2.36947e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 1225 lines of history.
! 
! Reading 2956 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J0859-3309_S_2002_01_31_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.271536 Jy 
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.775 mas, bmaj=36.77 mas, bpa=0.3076 degrees
! Estimated noise=2498.15 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0436282 Jy
! Component: 100  -  total flux cleaned = 0.0498073 Jy
! Total flux subtracted in 100 components = 0.0498073 Jy
! Clean residual min=-0.009551 max=0.009577 Jy/beam
! Clean residual mean=0.000148 rms=0.004231 Jy/beam
! Combined flux in latest and established models = 0.0498073 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 48 model components to the UV plane model.
! The established model now contains 48 components and 0.0498073 Jy
! 
! Correcting IF 1.
!  A total of 412 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 452 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 336 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 336 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.264792Jy  sigma=0.001830
! Fit after  self-cal, rms=0.261709Jy  sigma=0.001799
! Inverting map and beam 
! Estimated beam: bmin=7.775 mas, bmaj=36.75 mas, bpa=0.3094 degrees
! Estimated noise=2505.85 mJy/beam.
! Added new window around map position (0.5, 3).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0331243 Jy
! Component: 100  -  total flux cleaned = 0.0494566 Jy
! Total flux subtracted in 100 components = 0.0494566 Jy
! Clean residual min=-0.010617 max=0.011118 Jy/beam
! Clean residual mean=0.000310 rms=0.003710 Jy/beam
! Combined flux in latest and established models = 0.0992639 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 50 model components to the UV plane model.
! The established model now contains 92 components and 0.0992639 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.257214Jy  sigma=0.001760
! Fit after  self-cal, rms=0.257199Jy  sigma=0.001760
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=10.02 mas, bmaj=43.98 mas, bpa=1.46 degrees
! Estimated noise=1898.81 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0154459 Jy
! Component: 100  -  total flux cleaned = 0.0214236 Jy
! Component: 150  -  total flux cleaned = 0.022394 Jy
! Component: 200  -  total flux cleaned = 0.0230871 Jy
! Total flux subtracted in 200 components = 0.0230871 Jy
! Clean residual min=-0.007986 max=0.007423 Jy/beam
! Clean residual mean=0.000637 rms=0.002594 Jy/beam
! Combined flux in latest and established models = 0.122351 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 70 model components to the UV plane model.
! The established model now contains 151 components and 0.122351 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.256493Jy  sigma=0.001754
! Fit after  self-cal, rms=0.256468Jy  sigma=0.001754
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 10.02 x 43.98 at 1.46 degrees (North through East)
! Clean map  min=-0.0078513  max=0.08041 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 54 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 54 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 54 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.256468Jy  sigma=0.001754
! Fit after  self-cal, rms=0.263956Jy  sigma=0.001792
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.263956Jy  sigma=0.001792
! Fit after  self-cal, rms=0.263911Jy  sigma=0.001792
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.654 mas, bmaj=42.69 mas, bpa=1.215 degrees
! Estimated noise=2012.4 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00213503 Jy
! Component: 100  -  total flux cleaned = -0.00167791 Jy
! Component: 150  -  total flux cleaned = -0.00138068 Jy
! Component: 200  -  total flux cleaned = -0.00102201 Jy
! Total flux subtracted in 200 components = -0.00102201 Jy
! Clean residual min=-0.008261 max=0.007802 Jy/beam
! Clean residual mean=0.000813 rms=0.002491 Jy/beam
! Combined flux in latest and established models = 0.121329 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 25 model components to the UV plane model.
! The established model now contains 166 components and 0.121329 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.263797Jy  sigma=0.001791
! Fit after  self-cal, rms=0.263788Jy  sigma=0.001791
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.263788Jy  sigma=0.001791
! Fit after  self-cal, rms=0.262134Jy  sigma=0.001779
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00466975 Jy
! Component: 100  -  total flux cleaned = 0.00593297 Jy
! Component: 150  -  total flux cleaned = 0.00616297 Jy
! Component: 200  -  total flux cleaned = 0.00636056 Jy
! Total flux subtracted in 200 components = 0.00636056 Jy
! Clean residual min=-0.008310 max=0.009463 Jy/beam
! Clean residual mean=0.000835 rms=0.002585 Jy/beam
! Combined flux in latest and established models = 0.127689 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 63 model components to the UV plane model.
! The established model now contains 215 components and 0.127689 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.261886Jy  sigma=0.001778
! Fit after  self-cal, rms=0.261359Jy  sigma=0.001774
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.654 x 42.69 at 1.215 degrees (North through East)
! Clean map  min=-0.0084287  max=0.079863 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=10.81 mas, bmaj=45.07 mas, bpa=2.045 degrees
! Estimated noise=2041.77 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00272997 Jy
! Component: 100  -  total flux cleaned = 0.00232584 Jy
! Component: 150  -  total flux cleaned = 0.00199317 Jy
! Component: 200  -  total flux cleaned = 0.00178904 Jy
! Total flux subtracted in 200 components = 0.00178904 Jy
! Clean residual min=-0.008328 max=0.009204 Jy/beam
! Clean residual mean=0.001164 rms=0.002428 Jy/beam
! Combined flux in latest and established models = 0.129479 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 26 model components to the UV plane model.
! The established model now contains 235 components and 0.129479 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.261250Jy  sigma=0.001773
! Fit after  self-cal, rms=0.260991Jy  sigma=0.001772
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.768 mas, bmaj=36.67 mas, bpa=0.306 degrees
! Estimated noise=2589.57 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0720369 Jy
! Component: 100  -  total flux cleaned = 0.103454 Jy
! Component: 150  -  total flux cleaned = 0.114367 Jy
! Component: 200  -  total flux cleaned = 0.119466 Jy
! Total flux subtracted in 200 components = 0.119466 Jy
! Clean residual min=-0.011202 max=0.013559 Jy/beam
! Clean residual mean=0.000462 rms=0.004636 Jy/beam
! Combined flux in latest and established models = 0.119466 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 78 model components to the UV plane model.
! The established model now contains 78 components and 0.119466 Jy
! Inverting map and beam 
! Estimated beam: bmin=9.654 mas, bmaj=42.69 mas, bpa=1.215 degrees
! Estimated noise=2012.4 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00736762 Jy
! Component: 100  -  total flux cleaned = 0.00998255 Jy
! Component: 150  -  total flux cleaned = 0.0117075 Jy
! Component: 200  -  total flux cleaned = 0.0125422 Jy
! Total flux subtracted in 200 components = 0.0125422 Jy
! Clean residual min=-0.009152 max=0.010483 Jy/beam
! Clean residual mean=0.000979 rms=0.002975 Jy/beam
! Combined flux in latest and established models = 0.132008 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 106 components and 0.132008 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=10.81 mas, bmaj=45.07 mas, bpa=2.045 degrees
! Estimated noise=2041.77 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00237703 Jy
! Component: 100  -  total flux cleaned = 0.00277998 Jy
! Component: 150  -  total flux cleaned = 0.00298383 Jy
! Component: 200  -  total flux cleaned = 0.00303852 Jy
! Total flux subtracted in 200 components = 0.00303852 Jy
! Clean residual min=-0.008990 max=0.009195 Jy/beam
! Clean residual mean=0.001110 rms=0.002542 Jy/beam
! Combined flux in latest and established models = 0.135047 Jy
! Adding 48 model components to the UV plane model.
! The established model now contains 150 components and 0.135047 Jy
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=9.654 mas, bmaj=42.69 mas, bpa=1.215 degrees
! Estimated noise=2012.4 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00044168 Jy
! Component: 100  -  total flux cleaned = -0.000244388 Jy
! Component: 150  -  total flux cleaned = -5.746e-05 Jy
! Component: 200  -  total flux cleaned = -5.65809e-05 Jy
! Total flux subtracted in 200 components = -5.65809e-05 Jy
! Clean residual min=-0.009213 max=0.010195 Jy/beam
! Clean residual mean=0.000955 rms=0.002900 Jy/beam
! Combined flux in latest and established models = 0.13499 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 27 model components to the UV plane model.
! The established model now contains 173 components and 0.13499 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.260688Jy  sigma=0.001770
! Fit after  self-cal, rms=0.260249Jy  sigma=0.001767
wmodel J0859-3309_S_2002_01_31_yyk\_map.mod
! Writing 173 model components to file: J0859-3309_S_2002_01_31_yyk_map.mod
wobs J0859-3309_S_2002_01_31_yyk\_uvs.fits
! Writing UV FITS file: J0859-3309_S_2002_01_31_yyk_uvs.fits
wwins J0859-3309_S_2002_01_31_yyk\_map.win
! wwins: Wrote 1 windows to J0859-3309_S_2002_01_31_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00267622 Jy
! Component: 100  -  total flux cleaned = 0.00425823 Jy
! Component: 150  -  total flux cleaned = 0.00655665 Jy
! Component: 200  -  total flux cleaned = 0.00873807 Jy
! Component: 250  -  total flux cleaned = 0.0109305 Jy
! Component: 300  -  total flux cleaned = 0.0127806 Jy
! Component: 350  -  total flux cleaned = 0.014543 Jy
! Component: 400  -  total flux cleaned = 0.0161153 Jy
! Component: 450  -  total flux cleaned = 0.0173266 Jy
! Component: 500  -  total flux cleaned = 0.018302 Jy
! Component: 550  -  total flux cleaned = 0.0192479 Jy
! Component: 600  -  total flux cleaned = 0.0202545 Jy
! Component: 650  -  total flux cleaned = 0.0210511 Jy
! Component: 700  -  total flux cleaned = 0.02191 Jy
! Component: 750  -  total flux cleaned = 0.0227421 Jy
! Component: 800  -  total flux cleaned = 0.0233102 Jy
! Component: 850  -  total flux cleaned = 0.0242637 Jy
! Component: 900  -  total flux cleaned = 0.0251175 Jy
! Component: 950  -  total flux cleaned = 0.0258777 Jy
! Component: 1000  -  total flux cleaned = 0.0266973 Jy
! Component: 1050  -  total flux cleaned = 0.0274993 Jy
! Component: 1100  -  total flux cleaned = 0.0282138 Jy
! Component: 1150  -  total flux cleaned = 0.0289839 Jy
! Component: 1200  -  total flux cleaned = 0.0296708 Jy
! Component: 1250  -  total flux cleaned = 0.0306174 Jy
! Component: 1300  -  total flux cleaned = 0.0316815 Jy
! Component: 1350  -  total flux cleaned = 0.0325322 Jy
! Component: 1400  -  total flux cleaned = 0.0334992 Jy
! Component: 1450  -  total flux cleaned = 0.0341351 Jy
! Component: 1500  -  total flux cleaned = 0.034888 Jy
! Component: 1550  -  total flux cleaned = 0.0355079 Jy
! Component: 1600  -  total flux cleaned = 0.0363032 Jy
! Component: 1650  -  total flux cleaned = 0.0370282 Jy
! Component: 1700  -  total flux cleaned = 0.0376258 Jy
! Component: 1750  -  total flux cleaned = 0.0383341 Jy
! Component: 1800  -  total flux cleaned = 0.0388583 Jy
! Component: 1850  -  total flux cleaned = 0.0394351 Jy
! Component: 1900  -  total flux cleaned = 0.0401185 Jy
! Component: 1950  -  total flux cleaned = 0.0405132 Jy
! Component: 2000  -  total flux cleaned = 0.0411819 Jy
! Total flux subtracted in 2048 components = 0.0415129 Jy
! Clean residual min=-0.003400 max=0.003559 Jy/beam
! Clean residual mean=0.000313 rms=0.001365 Jy/beam
! Combined flux in latest and established models = 0.176503 Jy
keep
! Adding 209 model components to the UV plane model.
! The established model now contains 382 components and 0.176503 Jy
![Exited script file: muppet]
wmap "J0859-3309_S_2002_01_31_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.654 x 42.69 at 1.215 degrees (North through East)
! Clean map  min=-0.0061804  max=0.078472 Jy/beam
! Writing clean map to FITS file: J0859-3309_S_2002_01_31_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0784716 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00132922 
device "J0859-3309_S_2002_01_31_yyk\_map.eps/VPS"
! Attempting to open device: 'J0859-3309_S_2002_01_31_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -5.08164 5.08164 10.1633 20.3266 40.6531 81.3062
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0039 
print "peak=",int(peak_flux*1000)/1000
! peak= 0.078 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.654 x 42.69 at 1.215 degrees (North through East)
! Clean map  min=-0.0061804  max=0.078472 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J0859-3309_S_2002_01_31_yyk\_map.gif/gif"
! Attempting to open device: 'J0859-3309_S_2002_01_31_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J0859-3309_S_2002_01_31_yyk_uvs.log closed on Tue Jun 26 22:34:37 2007