! Started logfile: J0849-3541_X_2002_05_14_yyk_uvs.log on Tue Jun 26 22:34:04 2007 obs J0849-3541_X_2002_05_14_yyk_uva.fits ! Reading UV FITS file: J0849-3541_X_2002_05_14_yyk_uva.fits ! AN table 1: 36 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.790123 visibilities/baseline/integration-bin. ! Found source: J0849-3541 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40947e+09 8e+06 1 8e+06 ! 02 2 8.47947e+09 8e+06 1 8e+06 ! 03 3 8.79447e+09 8e+06 1 8e+06 ! 04 4 8.89947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1076 lines of history. ! ! Reading 5120 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0849-3541_X_2002_05_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.388699 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6789 mas, bmaj=1.786 mas, bpa=9.911 degrees ! Estimated noise=3025.7 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.264992 Jy ! Component: 100 - total flux cleaned = 0.337418 Jy ! Total flux subtracted in 100 components = 0.337418 Jy ! Clean residual min=-0.015657 max=0.024144 Jy/beam ! Clean residual mean=-0.000040 rms=0.005958 Jy/beam ! Combined flux in latest and established models = 0.337418 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.337418 Jy ! ! Correcting IF 1. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.206310Jy sigma=0.001301 ! Fit after self-cal, rms=0.206069Jy sigma=0.001300 ! Inverting map and beam ! Estimated beam: bmin=0.6789 mas, bmaj=1.786 mas, bpa=9.911 degrees ! Estimated noise=3025.7 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8984 mas, bmaj=2.37 mas, bpa=10.76 degrees ! Estimated noise=1484.34 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0434266 Jy ! Component: 100 - total flux cleaned = 0.0565562 Jy ! Component: 150 - total flux cleaned = 0.061274 Jy ! Component: 200 - total flux cleaned = 0.0627046 Jy ! Total flux subtracted in 200 components = 0.0627046 Jy ! Clean residual min=-0.014124 max=0.015765 Jy/beam ! Clean residual mean=-0.000075 rms=0.004397 Jy/beam ! Combined flux in latest and established models = 0.400122 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 30 components and 0.400122 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.201791Jy sigma=0.001260 ! Fit after self-cal, rms=0.201790Jy sigma=0.001260 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8984 x 2.37 at 10.76 degrees (North through East) ! Clean map min=-0.013414 max=0.323 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.978535 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.96 HN 1.00* KP 0.93 ! LA 1.00 NL 1.28 OV 1.01 PT 1.01 ! SC 0.98 MK 1.05 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.00845 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.97 HN 1.00* KP 0.90 ! LA 0.94 NL 1.18 OV 1.02 PT 1.01 ! SC 0.97 MK 0.92 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.998573 ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.91 HN 1.00* KP 0.87 ! LA 0.96 NL 1.18 OV 1.02 PT 1.03 ! SC 1.01 MK 0.98 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.974513 ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.88 HN 1.00* KP 0.99 ! LA 0.97 NL 1.16 OV 1.05 PT 1.08 ! SC 1.01 MK 1.02 ! ! ! Fit before self-cal, rms=0.201790Jy sigma=0.001260 ! Fit after self-cal, rms=0.202710Jy sigma=0.001240 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.202710Jy sigma=0.001240 ! Fit after self-cal, rms=0.202713Jy sigma=0.001240 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8972 mas, bmaj=2.37 mas, bpa=10.87 degrees ! Estimated noise=1450.11 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00664117 Jy ! Component: 100 - total flux cleaned = -0.00828253 Jy ! Component: 150 - total flux cleaned = -0.00854789 Jy ! Component: 200 - total flux cleaned = -0.00882132 Jy ! Total flux subtracted in 200 components = -0.00882132 Jy ! Clean residual min=-0.007246 max=0.008831 Jy/beam ! Clean residual mean=-0.000038 rms=0.002229 Jy/beam ! Combined flux in latest and established models = 0.391301 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 35 components and 0.391301 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.202556Jy sigma=0.001239 ! Fit after self-cal, rms=0.202551Jy sigma=0.001239 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.202551Jy sigma=0.001239 ! Fit after self-cal, rms=0.195500Jy sigma=0.001185 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00281214 Jy ! Component: 100 - total flux cleaned = 0.00282755 Jy ! Component: 150 - total flux cleaned = 0.00278751 Jy ! Component: 200 - total flux cleaned = 0.0026693 Jy ! Total flux subtracted in 200 components = 0.0026693 Jy ! Clean residual min=-0.006861 max=0.008449 Jy/beam ! Clean residual mean=-0.000038 rms=0.002187 Jy/beam ! Combined flux in latest and established models = 0.39397 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 41 components and 0.39397 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.195407Jy sigma=0.001185 ! Fit after self-cal, rms=0.194539Jy sigma=0.001178 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8972 x 2.37 at 10.87 degrees (North through East) ! Clean map min=-0.0063069 max=0.32556 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.194539Jy sigma=0.001178 ! Fit after self-cal, rms=0.194075Jy sigma=0.001176 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.194075Jy sigma=0.001176 ! Fit after self-cal, rms=0.193815Jy sigma=0.001174 ! Inverting map and beam ! Estimated beam: bmin=0.8904 mas, bmaj=2.356 mas, bpa=10.9 degrees ! Estimated noise=1443.63 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000236359 Jy ! Component: 100 - total flux cleaned = 0.000173319 Jy ! Component: 150 - total flux cleaned = 0.000120629 Jy ! Component: 200 - total flux cleaned = 9.75313e-05 Jy ! Total flux subtracted in 200 components = 9.75313e-05 Jy ! Clean residual min=-0.006373 max=0.008372 Jy/beam ! Clean residual mean=-0.000036 rms=0.002164 Jy/beam ! Combined flux in latest and established models = 0.394068 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 46 components and 0.394068 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193808Jy sigma=0.001174 ! Fit after self-cal, rms=0.193665Jy sigma=0.001173 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193665Jy sigma=0.001173 ! Fit after self-cal, rms=0.194294Jy sigma=0.001170 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.194294Jy sigma=0.001170 ! Fit after self-cal, rms=0.194205Jy sigma=0.001169 ! Inverting map and beam ! Estimated beam: bmin=0.8899 mas, bmaj=2.359 mas, bpa=11.16 degrees ! Estimated noise=1444.07 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000518683 Jy ! Component: 100 - total flux cleaned = 0.000491325 Jy ! Component: 150 - total flux cleaned = 0.000465971 Jy ! Component: 200 - total flux cleaned = 0.000443178 Jy ! Total flux subtracted in 200 components = 0.000443178 Jy ! Clean residual min=-0.006356 max=0.008286 Jy/beam ! Clean residual mean=-0.000036 rms=0.002161 Jy/beam ! Combined flux in latest and established models = 0.394511 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 49 components and 0.394511 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.194199Jy sigma=0.001169 ! Fit after self-cal, rms=0.194133Jy sigma=0.001169 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.692 mas, bmaj=10.14 mas, bpa=13.13 degrees ! Estimated noise=1793.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00159686 Jy ! Component: 100 - total flux cleaned = 0.00159937 Jy ! Component: 150 - total flux cleaned = 0.00159833 Jy ! Component: 200 - total flux cleaned = 0.00159696 Jy ! Total flux subtracted in 200 components = 0.00159696 Jy ! Clean residual min=-0.007567 max=0.009338 Jy/beam ! Clean residual mean=-0.000061 rms=0.003032 Jy/beam ! Combined flux in latest and established models = 0.396108 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 51 components and 0.396108 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.194179Jy sigma=0.001169 ! Fit after self-cal, rms=0.194104Jy sigma=0.001169 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6757 mas, bmaj=1.78 mas, bpa=9.842 degrees ! Estimated noise=2975.73 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.266297 Jy ! Component: 100 - total flux cleaned = 0.33973 Jy ! Component: 150 - total flux cleaned = 0.372088 Jy ! Component: 200 - total flux cleaned = 0.386668 Jy ! Total flux subtracted in 200 components = 0.386668 Jy ! Clean residual min=-0.012973 max=0.012960 Jy/beam ! Clean residual mean=-0.000023 rms=0.003541 Jy/beam ! Combined flux in latest and established models = 0.386668 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.386668 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8899 mas, bmaj=2.359 mas, bpa=11.16 degrees ! Estimated noise=1444.07 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00720741 Jy ! Component: 100 - total flux cleaned = 0.0077733 Jy ! Component: 150 - total flux cleaned = 0.00777164 Jy ! Component: 200 - total flux cleaned = 0.00776465 Jy ! Total flux subtracted in 200 components = 0.00776465 Jy ! Clean residual min=-0.006472 max=0.008661 Jy/beam ! Clean residual mean=-0.000036 rms=0.002196 Jy/beam ! Combined flux in latest and established models = 0.394433 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 27 components and 0.394433 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.692 mas, bmaj=10.14 mas, bpa=13.13 degrees ! Estimated noise=1793.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00174107 Jy ! Component: 100 - total flux cleaned = 0.00174664 Jy ! Component: 150 - total flux cleaned = 0.00174855 Jy ! Component: 200 - total flux cleaned = 0.00175002 Jy ! Total flux subtracted in 200 components = 0.00175002 Jy ! Clean residual min=-0.007528 max=0.009381 Jy/beam ! Clean residual mean=-0.000061 rms=0.003031 Jy/beam ! Combined flux in latest and established models = 0.396183 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 36 components and 0.396183 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8899 mas, bmaj=2.359 mas, bpa=11.16 degrees ! Estimated noise=1444.07 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00146085 Jy ! Component: 100 - total flux cleaned = -0.00139675 Jy ! Component: 150 - total flux cleaned = -0.00139691 Jy ! Component: 200 - total flux cleaned = -0.00144095 Jy ! Total flux subtracted in 200 components = -0.00144095 Jy ! Clean residual min=-0.006522 max=0.008558 Jy/beam ! Clean residual mean=-0.000037 rms=0.002179 Jy/beam ! Combined flux in latest and established models = 0.394742 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 45 components and 0.394742 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.194187Jy sigma=0.001169 ! Fit after self-cal, rms=0.194149Jy sigma=0.001169 wmodel J0849-3541_X_2002_05_14_yyk\_map.mod ! Writing 45 model components to file: J0849-3541_X_2002_05_14_yyk_map.mod wobs J0849-3541_X_2002_05_14_yyk\_uvs.fits ! Writing UV FITS file: J0849-3541_X_2002_05_14_yyk_uvs.fits wwins J0849-3541_X_2002_05_14_yyk\_map.win ! wwins: Wrote 1 windows to J0849-3541_X_2002_05_14_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00375417 Jy ! Component: 100 - total flux cleaned = 0.00598444 Jy ! Component: 150 - total flux cleaned = 0.00630768 Jy ! Component: 200 - total flux cleaned = 0.00659644 Jy ! Component: 250 - total flux cleaned = 0.00703572 Jy ! Component: 300 - total flux cleaned = 0.00711886 Jy ! Component: 350 - total flux cleaned = 0.00696592 Jy ! Component: 400 - total flux cleaned = 0.00696458 Jy ! Component: 450 - total flux cleaned = 0.00682764 Jy ! Component: 500 - total flux cleaned = 0.00663201 Jy ! Component: 550 - total flux cleaned = 0.00625169 Jy ! Component: 600 - total flux cleaned = 0.00582295 Jy ! Component: 650 - total flux cleaned = 0.00540583 Jy ! Component: 700 - total flux cleaned = 0.00494309 Jy ! Component: 750 - total flux cleaned = 0.00449253 Jy ! Component: 800 - total flux cleaned = 0.00400013 Jy ! Component: 850 - total flux cleaned = 0.00346816 Jy ! Component: 900 - total flux cleaned = 0.00295008 Jy ! Component: 950 - total flux cleaned = 0.00254628 Jy ! Component: 1000 - total flux cleaned = 0.00215245 Jy ! Component: 1050 - total flux cleaned = 0.00186489 Jy ! Component: 1100 - total flux cleaned = 0.00148949 Jy ! Component: 1150 - total flux cleaned = 0.00116797 Jy ! Component: 1200 - total flux cleaned = 0.000897109 Jy ! Component: 1250 - total flux cleaned = 0.000543716 Jy ! Component: 1300 - total flux cleaned = 0.000199535 Jy ! Component: 1350 - total flux cleaned = -5.32213e-05 Jy ! Component: 1400 - total flux cleaned = -0.000259201 Jy ! Component: 1450 - total flux cleaned = -0.000381671 Jy ! Component: 1500 - total flux cleaned = -0.000580978 Jy ! Component: 1550 - total flux cleaned = -0.000853231 Jy ! Component: 1600 - total flux cleaned = -0.000966923 Jy ! Component: 1650 - total flux cleaned = -0.00107935 Jy ! Component: 1700 - total flux cleaned = -0.00141102 Jy ! Component: 1750 - total flux cleaned = -0.00151958 Jy ! Component: 1800 - total flux cleaned = -0.00176932 Jy ! Component: 1850 - total flux cleaned = -0.00183898 Jy ! Component: 1900 - total flux cleaned = -0.00201225 Jy ! Component: 1950 - total flux cleaned = -0.0020809 Jy ! Component: 2000 - total flux cleaned = -0.00211458 Jy ! Total flux subtracted in 2048 components = -0.00224804 Jy ! Clean residual min=-0.001827 max=0.001813 Jy/beam ! Clean residual mean=0.000001 rms=0.000636 Jy/beam ! Combined flux in latest and established models = 0.392494 Jy keep ! Adding 114 model components to the UV plane model. ! The established model now contains 159 components and 0.392494 Jy ![Exited script file: muppet] wmap "J0849-3541_X_2002_05_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8899 x 2.359 at 11.16 degrees (North through East) ! Clean map min=-0.0047869 max=0.32384 Jy/beam ! Writing clean map to FITS file: J0849-3541_X_2002_05_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.32384 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000614341 device "J0849-3541_X_2002_05_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J0849-3541_X_2002_05_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.569114 0.569114 1.13823 2.27646 4.55291 9.10583 18.2117 36.4233 72.8466 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.323 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8899 x 2.359 at 11.16 degrees (North through East) ! Clean map min=-0.0047869 max=0.32384 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0849-3541_X_2002_05_14_yyk\_map.gif/gif" ! Attempting to open device: 'J0849-3541_X_2002_05_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0849-3541_X_2002_05_14_yyk_uvs.log closed on Tue Jun 26 22:34:11 2007