! Started logfile: J0849-3541_S_2002_05_14_yyk_uvs.log on Tue Jun 26 22:33:51 2007 obs J0849-3541_S_2002_05_14_yyk_uva.fits ! Reading UV FITS file: J0849-3541_S_2002_05_14_yyk_uva.fits ! AN table 1: 36 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.790123 visibilities/baseline/integration-bin. ! Found source: J0849-3541 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22947e+09 8e+06 1 8e+06 ! 02 2 2.25947e+09 8e+06 1 8e+06 ! 03 3 2.34947e+09 8e+06 1 8e+06 ! 04 4 2.36947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1153 lines of history. ! ! Reading 5120 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0849-3541_S_2002_05_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.341916 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.267 mas, bmaj=6.789 mas, bpa=8.284 degrees ! Estimated noise=4680.85 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.190533 Jy ! Component: 100 - total flux cleaned = 0.251081 Jy ! Total flux subtracted in 100 components = 0.251081 Jy ! Clean residual min=-0.015430 max=0.021666 Jy/beam ! Clean residual mean=0.000543 rms=0.005570 Jy/beam ! Combined flux in latest and established models = 0.251081 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 0.251081 Jy ! ! Correcting IF 1. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 74 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.232873Jy sigma=0.001236 ! Fit after self-cal, rms=0.232754Jy sigma=0.001235 ! Inverting map and beam ! Estimated beam: bmin=2.267 mas, bmaj=6.789 mas, bpa=8.284 degrees ! Estimated noise=4680.85 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.218 mas, bmaj=8.501 mas, bpa=8.223 degrees ! Estimated noise=1805.78 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0461072 Jy ! Component: 100 - total flux cleaned = 0.0609477 Jy ! Component: 150 - total flux cleaned = 0.0665682 Jy ! Component: 200 - total flux cleaned = 0.0686868 Jy ! Total flux subtracted in 200 components = 0.0686868 Jy ! Clean residual min=-0.011319 max=0.015967 Jy/beam ! Clean residual mean=0.001232 rms=0.003892 Jy/beam ! Combined flux in latest and established models = 0.319767 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 58 model components to the UV plane model. ! The established model now contains 85 components and 0.319767 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.227330Jy sigma=0.001201 ! Fit after self-cal, rms=0.227332Jy sigma=0.001201 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.218 x 8.501 at 8.223 degrees (North through East) ! Clean map min=-0.011355 max=0.22964 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.971286 ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.19 HN 1.00* KP 0.95 ! LA 0.94 NL 1.18 OV 1.03 PT 1.04 ! SC 1.09 MK 0.96 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.984081 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.01 HN 1.00* KP 1.00* ! LA 0.90 NL 1.15 OV 1.02 PT 0.90 ! SC 1.16 MK 1.06 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.969864 ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.96 HN 1.00* KP 0.96 ! LA 0.94 NL 1.21 OV 1.07 PT 1.15 ! SC 0.92 MK 1.04 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.04158 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.89 HN 1.00* KP 1.04 ! LA 0.77 NL 1.15 OV 0.93 PT 0.97 ! SC 0.88 MK 0.99 ! ! ! Fit before self-cal, rms=0.227332Jy sigma=0.001201 ! Fit after self-cal, rms=0.227271Jy sigma=0.001185 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.227271Jy sigma=0.001185 ! Fit after self-cal, rms=0.227293Jy sigma=0.001185 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.24 mas, bmaj=8.529 mas, bpa=8.875 degrees ! Estimated noise=1770.79 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0039144 Jy ! Component: 100 - total flux cleaned = -0.00507444 Jy ! Component: 150 - total flux cleaned = -0.00521566 Jy ! Component: 200 - total flux cleaned = -0.00529304 Jy ! Total flux subtracted in 200 components = -0.00529304 Jy ! Clean residual min=-0.008251 max=0.013406 Jy/beam ! Clean residual mean=0.000507 rms=0.003505 Jy/beam ! Combined flux in latest and established models = 0.314474 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 97 components and 0.314474 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.227260Jy sigma=0.001185 ! Fit after self-cal, rms=0.227247Jy sigma=0.001185 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.227247Jy sigma=0.001185 ! Fit after self-cal, rms=0.226161Jy sigma=0.001178 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000778672 Jy ! Component: 100 - total flux cleaned = 0.000803929 Jy ! Component: 150 - total flux cleaned = 0.000804881 Jy ! Component: 200 - total flux cleaned = 0.000787471 Jy ! Total flux subtracted in 200 components = 0.000787471 Jy ! Clean residual min=-0.008055 max=0.013461 Jy/beam ! Clean residual mean=0.000507 rms=0.003475 Jy/beam ! Combined flux in latest and established models = 0.315262 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 103 components and 0.315262 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.226158Jy sigma=0.001178 ! Fit after self-cal, rms=0.226051Jy sigma=0.001178 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.24 x 8.529 at 8.875 degrees (North through East) ! Clean map min=-0.0078687 max=0.23012 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.226051Jy sigma=0.001178 ! Fit after self-cal, rms=0.225660Jy sigma=0.001174 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.225660Jy sigma=0.001174 ! Fit after self-cal, rms=0.225637Jy sigma=0.001174 ! Inverting map and beam ! Estimated beam: bmin=3.224 mas, bmaj=8.487 mas, bpa=8.733 degrees ! Estimated noise=1763.4 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000256724 Jy ! Component: 100 - total flux cleaned = -0.000232731 Jy ! Component: 150 - total flux cleaned = -0.000230172 Jy ! Component: 200 - total flux cleaned = -0.000246701 Jy ! Total flux subtracted in 200 components = -0.000246701 Jy ! Clean residual min=-0.007706 max=0.013248 Jy/beam ! Clean residual mean=0.000512 rms=0.003424 Jy/beam ! Combined flux in latest and established models = 0.315015 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 104 components and 0.315015 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.225633Jy sigma=0.001174 ! Fit after self-cal, rms=0.225618Jy sigma=0.001174 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.225618Jy sigma=0.001174 ! Fit after self-cal, rms=0.226862Jy sigma=0.001172 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.226862Jy sigma=0.001172 ! Fit after self-cal, rms=0.226867Jy sigma=0.001172 ! Inverting map and beam ! Estimated beam: bmin=3.227 mas, bmaj=8.493 mas, bpa=8.672 degrees ! Estimated noise=1765.46 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000423155 Jy ! Component: 100 - total flux cleaned = 0.000422477 Jy ! Component: 150 - total flux cleaned = 0.000423974 Jy ! Component: 200 - total flux cleaned = 0.000393435 Jy ! Total flux subtracted in 200 components = 0.000393435 Jy ! Clean residual min=-0.007705 max=0.013492 Jy/beam ! Clean residual mean=0.000510 rms=0.003440 Jy/beam ! Combined flux in latest and established models = 0.315409 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 106 components and 0.315409 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.226865Jy sigma=0.001172 ! Fit after self-cal, rms=0.226865Jy sigma=0.001172 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.255 mas, bmaj=31.23 mas, bpa=12.38 degrees ! Estimated noise=2203.78 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00108798 Jy ! Component: 100 - total flux cleaned = 0.00108416 Jy ! Component: 150 - total flux cleaned = 0.00108159 Jy ! Component: 200 - total flux cleaned = 0.00108 Jy ! Total flux subtracted in 200 components = 0.00108 Jy ! Clean residual min=-0.010022 max=0.017743 Jy/beam ! Clean residual mean=0.000891 rms=0.005397 Jy/beam ! Combined flux in latest and established models = 0.316489 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 5 model components to the UV plane model. ! The established model now contains 109 components and 0.316489 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.226944Jy sigma=0.001172 ! Fit after self-cal, rms=0.226884Jy sigma=0.001172 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.24 mas, bmaj=6.749 mas, bpa=8.775 degrees ! Estimated noise=4567.79 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.187163 Jy ! Component: 100 - total flux cleaned = 0.249592 Jy ! Component: 150 - total flux cleaned = 0.280823 Jy ! Component: 200 - total flux cleaned = 0.29721 Jy ! Total flux subtracted in 200 components = 0.29721 Jy ! Clean residual min=-0.012915 max=0.012681 Jy/beam ! Clean residual mean=0.000170 rms=0.003960 Jy/beam ! Combined flux in latest and established models = 0.29721 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 47 model components to the UV plane model. ! The established model now contains 47 components and 0.29721 Jy ! Inverting map and beam ! Estimated beam: bmin=3.227 mas, bmaj=8.493 mas, bpa=8.672 degrees ! Estimated noise=1765.46 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0136285 Jy ! Component: 100 - total flux cleaned = 0.0168736 Jy ! Component: 150 - total flux cleaned = 0.0172339 Jy ! Component: 200 - total flux cleaned = 0.0174685 Jy ! Total flux subtracted in 200 components = 0.0174685 Jy ! Clean residual min=-0.007867 max=0.013728 Jy/beam ! Clean residual mean=0.000518 rms=0.003419 Jy/beam ! Combined flux in latest and established models = 0.314679 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 61 components and 0.314679 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.255 mas, bmaj=31.23 mas, bpa=12.38 degrees ! Estimated noise=2203.78 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00162155 Jy ! Component: 100 - total flux cleaned = 0.00161282 Jy ! Component: 150 - total flux cleaned = 0.00160923 Jy ! Component: 200 - total flux cleaned = 0.00160796 Jy ! Total flux subtracted in 200 components = 0.00160796 Jy ! Clean residual min=-0.010070 max=0.017813 Jy/beam ! Clean residual mean=0.000895 rms=0.005366 Jy/beam ! Combined flux in latest and established models = 0.316287 Jy ! Adding 6 model components to the UV plane model. ! The established model now contains 64 components and 0.316287 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.227 mas, bmaj=8.493 mas, bpa=8.672 degrees ! Estimated noise=1765.46 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00102375 Jy ! Component: 100 - total flux cleaned = -0.000898512 Jy ! Component: 150 - total flux cleaned = -0.000864519 Jy ! Component: 200 - total flux cleaned = -0.000894262 Jy ! Total flux subtracted in 200 components = -0.000894262 Jy ! Clean residual min=-0.007754 max=0.013621 Jy/beam ! Clean residual mean=0.000510 rms=0.003416 Jy/beam ! Combined flux in latest and established models = 0.315392 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 75 components and 0.315392 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.226885Jy sigma=0.001172 ! Fit after self-cal, rms=0.226882Jy sigma=0.001172 wmodel J0849-3541_S_2002_05_14_yyk\_map.mod ! Writing 75 model components to file: J0849-3541_S_2002_05_14_yyk_map.mod wobs J0849-3541_S_2002_05_14_yyk\_uvs.fits ! Writing UV FITS file: J0849-3541_S_2002_05_14_yyk_uvs.fits wwins J0849-3541_S_2002_05_14_yyk\_map.win ! wwins: Wrote 1 windows to J0849-3541_S_2002_05_14_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00559126 Jy ! Component: 100 - total flux cleaned = 0.00989064 Jy ! Component: 150 - total flux cleaned = 0.0118184 Jy ! Component: 200 - total flux cleaned = 0.0131698 Jy ! Component: 250 - total flux cleaned = 0.0136797 Jy ! Component: 300 - total flux cleaned = 0.0140422 Jy ! Component: 350 - total flux cleaned = 0.0140452 Jy ! Component: 400 - total flux cleaned = 0.0140478 Jy ! Component: 450 - total flux cleaned = 0.0141519 Jy ! Component: 500 - total flux cleaned = 0.0141492 Jy ! Component: 550 - total flux cleaned = 0.014147 Jy ! Component: 600 - total flux cleaned = 0.0141458 Jy ! Component: 650 - total flux cleaned = 0.0139752 Jy ! Component: 700 - total flux cleaned = 0.0138114 Jy ! Component: 750 - total flux cleaned = 0.0135768 Jy ! Component: 800 - total flux cleaned = 0.0134265 Jy ! Component: 850 - total flux cleaned = 0.013355 Jy ! Component: 900 - total flux cleaned = 0.0134263 Jy ! Component: 950 - total flux cleaned = 0.013426 Jy ! Component: 1000 - total flux cleaned = 0.013621 Jy ! Component: 1050 - total flux cleaned = 0.0139357 Jy ! Component: 1100 - total flux cleaned = 0.0141208 Jy ! Component: 1150 - total flux cleaned = 0.0144818 Jy ! Component: 1200 - total flux cleaned = 0.0147152 Jy ! Component: 1250 - total flux cleaned = 0.0147158 Jy ! Component: 1300 - total flux cleaned = 0.0148831 Jy ! Component: 1350 - total flux cleaned = 0.0149366 Jy ! Component: 1400 - total flux cleaned = 0.0148317 Jy ! Component: 1450 - total flux cleaned = 0.0148329 Jy ! Component: 1500 - total flux cleaned = 0.0148837 Jy ! Component: 1550 - total flux cleaned = 0.0149821 Jy ! Component: 1600 - total flux cleaned = 0.0149343 Jy ! Component: 1650 - total flux cleaned = 0.0149822 Jy ! Component: 1700 - total flux cleaned = 0.0149358 Jy ! Component: 1750 - total flux cleaned = 0.0149359 Jy ! Component: 1800 - total flux cleaned = 0.0148917 Jy ! Component: 1850 - total flux cleaned = 0.0149776 Jy ! Component: 1900 - total flux cleaned = 0.0148505 Jy ! Component: 1950 - total flux cleaned = 0.0149339 Jy ! Component: 2000 - total flux cleaned = 0.0149738 Jy ! Total flux subtracted in 2048 components = 0.0147331 Jy ! Clean residual min=-0.002604 max=0.002442 Jy/beam ! Clean residual mean=0.000179 rms=0.000859 Jy/beam ! Combined flux in latest and established models = 0.330126 Jy keep ! Adding 169 model components to the UV plane model. ! The established model now contains 244 components and 0.330125 Jy ![Exited script file: muppet] wmap "J0849-3541_S_2002_05_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.227 x 8.493 at 8.672 degrees (North through East) ! Clean map min=-0.0065882 max=0.23055 Jy/beam ! Writing clean map to FITS file: J0849-3541_S_2002_05_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.230549 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000831971 device "J0849-3541_S_2002_05_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J0849-3541_S_2002_05_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.0826 1.0826 2.16519 4.33039 8.66077 17.3215 34.6431 69.2862 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0024 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.23 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.227 x 8.493 at 8.672 degrees (North through East) ! Clean map min=-0.0065882 max=0.23055 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0849-3541_S_2002_05_14_yyk\_map.gif/gif" ! Attempting to open device: 'J0849-3541_S_2002_05_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0849-3541_S_2002_05_14_yyk_uvs.log closed on Tue Jun 26 22:33:57 2007