! Started logfile: J0845-3718_X_2002_05_14_yyk_uvs.log on Tue Jun 26 22:33:23 2007 obs J0845-3718_X_2002_05_14_yyk_uva.fits ! Reading UV FITS file: J0845-3718_X_2002_05_14_yyk_uva.fits ! AN table 1: 36 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.8 visibilities/baseline/integration-bin. ! Found source: J0845-3718 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40947e+09 8e+06 1 8e+06 ! 02 2 8.47947e+09 8e+06 1 8e+06 ! 03 3 8.79447e+09 8e+06 1 8e+06 ! 04 4 8.89947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1076 lines of history. ! ! Reading 5184 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0845-3718_X_2002_05_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.271258 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6558 mas, bmaj=1.875 mas, bpa=8.753 degrees ! Estimated noise=2479.49 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.125967 Jy ! Component: 100 - total flux cleaned = 0.153413 Jy ! Total flux subtracted in 100 components = 0.153413 Jy ! Clean residual min=-0.013083 max=0.013454 Jy/beam ! Clean residual mean=-0.000014 rms=0.003697 Jy/beam ! Combined flux in latest and established models = 0.153413 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.153413 Jy ! ! Correcting IF 1. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.225605Jy sigma=0.001306 ! Fit after self-cal, rms=0.225494Jy sigma=0.001305 ! Inverting map and beam ! Estimated beam: bmin=0.6558 mas, bmaj=1.875 mas, bpa=8.753 degrees ! Estimated noise=2479.49 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8869 mas, bmaj=2.361 mas, bpa=10.11 degrees ! Estimated noise=1523.42 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0212562 Jy ! Component: 100 - total flux cleaned = 0.0292233 Jy ! Component: 150 - total flux cleaned = 0.031525 Jy ! Component: 200 - total flux cleaned = 0.0320411 Jy ! Total flux subtracted in 200 components = 0.0320411 Jy ! Clean residual min=-0.009552 max=0.009235 Jy/beam ! Clean residual mean=-0.000001 rms=0.003132 Jy/beam ! Combined flux in latest and established models = 0.185454 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 28 components and 0.185454 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.224869Jy sigma=0.001295 ! Fit after self-cal, rms=0.224877Jy sigma=0.001295 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8869 x 2.361 at 10.11 degrees (North through East) ! Clean map min=-0.00908 max=0.14122 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.975116 ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.87 HN 1.00* KP 0.87 ! LA 0.99 NL 1.17 OV 1.01 PT 1.07 ! SC 0.99 MK 1.18 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Fit before self-cal, rms=0.224877Jy sigma=0.001295 ! Fit after self-cal, rms=0.226822Jy sigma=0.001294 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.226822Jy sigma=0.001294 ! Fit after self-cal, rms=0.226826Jy sigma=0.001294 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8989 mas, bmaj=2.404 mas, bpa=10.99 degrees ! Estimated noise=1508.31 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0018077 Jy ! Component: 100 - total flux cleaned = -0.00148799 Jy ! Component: 150 - total flux cleaned = -0.00126411 Jy ! Component: 200 - total flux cleaned = -0.00104885 Jy ! Total flux subtracted in 200 components = -0.00104885 Jy ! Clean residual min=-0.007739 max=0.008526 Jy/beam ! Clean residual mean=-0.000004 rms=0.002655 Jy/beam ! Combined flux in latest and established models = 0.184405 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 32 components and 0.184405 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.226733Jy sigma=0.001294 ! Fit after self-cal, rms=0.226735Jy sigma=0.001294 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.226735Jy sigma=0.001294 ! Fit after self-cal, rms=0.223256Jy sigma=0.001272 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00332325 Jy ! Component: 100 - total flux cleaned = 0.00358506 Jy ! Component: 150 - total flux cleaned = 0.00378665 Jy ! Component: 200 - total flux cleaned = 0.00399167 Jy ! Total flux subtracted in 200 components = 0.00399167 Jy ! Clean residual min=-0.007376 max=0.008270 Jy/beam ! Clean residual mean=-0.000002 rms=0.002362 Jy/beam ! Combined flux in latest and established models = 0.188397 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 44 components and 0.188397 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.223228Jy sigma=0.001272 ! Fit after self-cal, rms=0.222266Jy sigma=0.001267 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8989 x 2.404 at 10.99 degrees (North through East) ! Clean map min=-0.0069433 max=0.13948 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.222266Jy sigma=0.001267 ! Fit after self-cal, rms=0.222568Jy sigma=0.001263 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.222568Jy sigma=0.001263 ! Fit after self-cal, rms=0.222333Jy sigma=0.001262 ! Inverting map and beam ! Estimated beam: bmin=0.9075 mas, bmaj=2.439 mas, bpa=11.7 degrees ! Estimated noise=1467.23 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00372701 Jy ! Component: 100 - total flux cleaned = -0.0044625 Jy ! Component: 150 - total flux cleaned = -0.004496 Jy ! Component: 200 - total flux cleaned = -0.00449993 Jy ! Total flux subtracted in 200 components = -0.00449993 Jy ! Clean residual min=-0.006686 max=0.006628 Jy/beam ! Clean residual mean=-0.000006 rms=0.001878 Jy/beam ! Combined flux in latest and established models = 0.183897 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 48 components and 0.183897 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.222248Jy sigma=0.001262 ! Fit after self-cal, rms=0.222167Jy sigma=0.001261 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.222167Jy sigma=0.001261 ! Fit after self-cal, rms=0.220429Jy sigma=0.001261 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.220429Jy sigma=0.001261 ! Fit after self-cal, rms=0.220403Jy sigma=0.001261 ! Inverting map and beam ! Estimated beam: bmin=0.8991 mas, bmaj=2.434 mas, bpa=12.43 degrees ! Estimated noise=1432.74 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00301311 Jy ! Component: 100 - total flux cleaned = -0.00302048 Jy ! Component: 150 - total flux cleaned = -0.00294289 Jy ! Component: 200 - total flux cleaned = -0.00297876 Jy ! Total flux subtracted in 200 components = -0.00297876 Jy ! Clean residual min=-0.007020 max=0.006388 Jy/beam ! Clean residual mean=-0.000001 rms=0.001843 Jy/beam ! Combined flux in latest and established models = 0.180918 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 53 components and 0.180918 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.220346Jy sigma=0.001260 ! Fit after self-cal, rms=0.220338Jy sigma=0.001260 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.694 mas, bmaj=10.85 mas, bpa=12.71 degrees ! Estimated noise=1769.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000991807 Jy ! Component: 100 - total flux cleaned = 0.000988954 Jy ! Component: 150 - total flux cleaned = 0.00106491 Jy ! Component: 200 - total flux cleaned = 0.0011396 Jy ! Total flux subtracted in 200 components = 0.0011396 Jy ! Clean residual min=-0.007387 max=0.006434 Jy/beam ! Clean residual mean=0.000002 rms=0.002279 Jy/beam ! Combined flux in latest and established models = 0.182058 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 5 model components to the UV plane model. ! The established model now contains 53 components and 0.182058 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.220355Jy sigma=0.001260 ! Fit after self-cal, rms=0.220348Jy sigma=0.001260 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6586 mas, bmaj=1.901 mas, bpa=9.704 degrees ! Estimated noise=2367.37 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.126358 Jy ! Component: 100 - total flux cleaned = 0.151228 Jy ! Component: 150 - total flux cleaned = 0.160922 Jy ! Component: 200 - total flux cleaned = 0.165826 Jy ! Total flux subtracted in 200 components = 0.165826 Jy ! Clean residual min=-0.009192 max=0.008944 Jy/beam ! Clean residual mean=0.000009 rms=0.002584 Jy/beam ! Combined flux in latest and established models = 0.165826 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.165826 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8991 mas, bmaj=2.434 mas, bpa=12.43 degrees ! Estimated noise=1432.74 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.2, -4.4). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0114541 Jy ! Component: 100 - total flux cleaned = 0.0162683 Jy ! Component: 150 - total flux cleaned = 0.0186762 Jy ! Component: 200 - total flux cleaned = 0.0190788 Jy ! Total flux subtracted in 200 components = 0.0190788 Jy ! Clean residual min=-0.006025 max=0.006921 Jy/beam ! Clean residual mean=0.000000 rms=0.001699 Jy/beam ! Combined flux in latest and established models = 0.184904 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 41 components and 0.184904 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.694 mas, bmaj=10.85 mas, bpa=12.71 degrees ! Estimated noise=1769.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000940026 Jy ! Component: 100 - total flux cleaned = 0.00102768 Jy ! Component: 150 - total flux cleaned = 0.0011529 Jy ! Component: 200 - total flux cleaned = 0.0012709 Jy ! Total flux subtracted in 200 components = 0.0012709 Jy ! Clean residual min=-0.006503 max=0.006812 Jy/beam ! Clean residual mean=0.000004 rms=0.002098 Jy/beam ! Combined flux in latest and established models = 0.186175 Jy ! Adding 6 model components to the UV plane model. ! The established model now contains 45 components and 0.186175 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8991 mas, bmaj=2.434 mas, bpa=12.43 degrees ! Estimated noise=1432.74 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000312054 Jy ! Component: 100 - total flux cleaned = -0.000314905 Jy ! Component: 150 - total flux cleaned = -0.000269833 Jy ! Component: 200 - total flux cleaned = -0.000270071 Jy ! Total flux subtracted in 200 components = -0.000270071 Jy ! Clean residual min=-0.005962 max=0.006462 Jy/beam ! Clean residual mean=0.000001 rms=0.001665 Jy/beam ! Combined flux in latest and established models = 0.185905 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 60 components and 0.185905 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.220179Jy sigma=0.001259 ! Fit after self-cal, rms=0.220177Jy sigma=0.001259 wmodel J0845-3718_X_2002_05_14_yyk\_map.mod ! Writing 60 model components to file: J0845-3718_X_2002_05_14_yyk_map.mod wobs J0845-3718_X_2002_05_14_yyk\_uvs.fits ! Writing UV FITS file: J0845-3718_X_2002_05_14_yyk_uvs.fits wwins J0845-3718_X_2002_05_14_yyk\_map.win ! wwins: Wrote 2 windows to J0845-3718_X_2002_05_14_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00059068 Jy ! Component: 100 - total flux cleaned = 0.00087612 Jy ! Component: 150 - total flux cleaned = 0.00122256 Jy ! Component: 200 - total flux cleaned = 0.00114072 Jy ! Component: 250 - total flux cleaned = 0.00106422 Jy ! Component: 300 - total flux cleaned = 0.00113797 Jy ! Component: 350 - total flux cleaned = 0.00135236 Jy ! Component: 400 - total flux cleaned = 0.00162488 Jy ! Component: 450 - total flux cleaned = 0.00175345 Jy ! Component: 500 - total flux cleaned = 0.00175215 Jy ! Component: 550 - total flux cleaned = 0.00199348 Jy ! Component: 600 - total flux cleaned = 0.00228772 Jy ! Component: 650 - total flux cleaned = 0.00262967 Jy ! Component: 700 - total flux cleaned = 0.00279625 Jy ! Component: 750 - total flux cleaned = 0.00295892 Jy ! Component: 800 - total flux cleaned = 0.00306466 Jy ! Component: 850 - total flux cleaned = 0.00306467 Jy ! Component: 900 - total flux cleaned = 0.00306398 Jy ! Component: 950 - total flux cleaned = 0.00301607 Jy ! Component: 1000 - total flux cleaned = 0.00311176 Jy ! Component: 1050 - total flux cleaned = 0.00320595 Jy ! Component: 1100 - total flux cleaned = 0.00329736 Jy ! Component: 1150 - total flux cleaned = 0.00334253 Jy ! Component: 1200 - total flux cleaned = 0.00347541 Jy ! Component: 1250 - total flux cleaned = 0.00356173 Jy ! Component: 1300 - total flux cleaned = 0.00360345 Jy ! Component: 1350 - total flux cleaned = 0.00368735 Jy ! Component: 1400 - total flux cleaned = 0.00376907 Jy ! Component: 1450 - total flux cleaned = 0.00380922 Jy ! Component: 1500 - total flux cleaned = 0.00384838 Jy ! Component: 1550 - total flux cleaned = 0.00384823 Jy ! Component: 1600 - total flux cleaned = 0.00384846 Jy ! Component: 1650 - total flux cleaned = 0.00388718 Jy ! Component: 1700 - total flux cleaned = 0.00388753 Jy ! Component: 1750 - total flux cleaned = 0.00392517 Jy ! Component: 1800 - total flux cleaned = 0.00396188 Jy ! Component: 1850 - total flux cleaned = 0.00403376 Jy ! Component: 1900 - total flux cleaned = 0.00406928 Jy ! Component: 1950 - total flux cleaned = 0.00410488 Jy ! Component: 2000 - total flux cleaned = 0.00417488 Jy ! Total flux subtracted in 2048 components = 0.0043479 Jy ! Clean residual min=-0.001723 max=0.002119 Jy/beam ! Clean residual mean=0.000023 rms=0.000702 Jy/beam ! Combined flux in latest and established models = 0.190253 Jy keep ! Adding 117 model components to the UV plane model. ! The established model now contains 177 components and 0.190253 Jy ![Exited script file: muppet] wmap "J0845-3718_X_2002_05_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8991 x 2.434 at 12.43 degrees (North through East) ! Clean map min=-0.0039311 max=0.14083 Jy/beam ! Writing clean map to FITS file: J0845-3718_X_2002_05_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.140828 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000684644 device "J0845-3718_X_2002_05_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J0845-3718_X_2002_05_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.45847 1.45847 2.91694 5.83389 11.6678 23.3356 46.6711 93.3422 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.002 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.14 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8991 x 2.434 at 12.43 degrees (North through East) ! Clean map min=-0.0039311 max=0.14083 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0845-3718_X_2002_05_14_yyk\_map.gif/gif" ! Attempting to open device: 'J0845-3718_X_2002_05_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0845-3718_X_2002_05_14_yyk_uvs.log closed on Tue Jun 26 22:33:29 2007