! Started logfile: J0844-3742_X_2002_05_14_yyk_uvs.log on Tue Jun 26 22:33:04 2007 obs J0844-3742_X_2002_05_14_yyk_uva.fits ! Reading UV FITS file: J0844-3742_X_2002_05_14_yyk_uva.fits ! AN table 1: 35 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.794921 visibilities/baseline/integration-bin. ! Found source: J0844-3742 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40947e+09 8e+06 1 8e+06 ! 02 2 8.47947e+09 8e+06 1 8e+06 ! 03 3 8.79447e+09 8e+06 1 8e+06 ! 04 4 8.89947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1076 lines of history. ! ! Reading 5008 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0844-3742_X_2002_05_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.243138 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6498 mas, bmaj=1.838 mas, bpa=9.953 degrees ! Estimated noise=2625.28 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0981667 Jy ! Component: 100 - total flux cleaned = 0.125214 Jy ! Total flux subtracted in 100 components = 0.125214 Jy ! Clean residual min=-0.015897 max=0.020917 Jy/beam ! Clean residual mean=-0.000018 rms=0.004448 Jy/beam ! Combined flux in latest and established models = 0.125214 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.125214 Jy ! ! Correcting IF 1. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.210344Jy sigma=0.001238 ! Fit after self-cal, rms=0.210015Jy sigma=0.001236 ! Inverting map and beam ! Estimated beam: bmin=0.6498 mas, bmaj=1.838 mas, bpa=9.953 degrees ! Estimated noise=2625.28 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8875 mas, bmaj=2.371 mas, bpa=10.22 degrees ! Estimated noise=1564.76 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0199596 Jy ! Component: 100 - total flux cleaned = 0.0272795 Jy ! Component: 150 - total flux cleaned = 0.0295529 Jy ! Component: 200 - total flux cleaned = 0.0299024 Jy ! Total flux subtracted in 200 components = 0.0299024 Jy ! Clean residual min=-0.011138 max=0.015749 Jy/beam ! Clean residual mean=0.000009 rms=0.003654 Jy/beam ! Combined flux in latest and established models = 0.155117 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 32 components and 0.155117 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.209302Jy sigma=0.001227 ! Fit after self-cal, rms=0.209302Jy sigma=0.001227 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8875 x 2.371 at 10.22 degrees (North through East) ! Clean map min=-0.011125 max=0.11403 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.00613 ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 1.00 HN 1.00* KP 0.87 ! LA 0.92 NL 1.10 OV 1.04 PT 0.97 ! SC 0.87 MK 1.00 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Fit before self-cal, rms=0.209302Jy sigma=0.001227 ! Fit after self-cal, rms=0.210442Jy sigma=0.001226 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.210442Jy sigma=0.001226 ! Fit after self-cal, rms=0.210444Jy sigma=0.001226 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8773 mas, bmaj=2.36 mas, bpa=11.05 degrees ! Estimated noise=1546.84 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000227319 Jy ! Component: 100 - total flux cleaned = -9.15818e-05 Jy ! Component: 150 - total flux cleaned = 0.000150332 Jy ! Component: 200 - total flux cleaned = 0.000375915 Jy ! Total flux subtracted in 200 components = 0.000375915 Jy ! Clean residual min=-0.010049 max=0.014495 Jy/beam ! Clean residual mean=0.000008 rms=0.003267 Jy/beam ! Combined flux in latest and established models = 0.155493 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 5 model components to the UV plane model. ! The established model now contains 32 components and 0.155492 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.210378Jy sigma=0.001226 ! Fit after self-cal, rms=0.210377Jy sigma=0.001226 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.210377Jy sigma=0.001226 ! Fit after self-cal, rms=0.207524Jy sigma=0.001209 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00366176 Jy ! Component: 100 - total flux cleaned = 0.00390639 Jy ! Component: 150 - total flux cleaned = 0.0040181 Jy ! Component: 200 - total flux cleaned = 0.00401455 Jy ! Total flux subtracted in 200 components = 0.00401455 Jy ! Clean residual min=-0.009925 max=0.013779 Jy/beam ! Clean residual mean=0.000012 rms=0.003152 Jy/beam ! Combined flux in latest and established models = 0.159507 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 39 components and 0.159507 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.207505Jy sigma=0.001209 ! Fit after self-cal, rms=0.207150Jy sigma=0.001207 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8773 x 2.36 at 11.05 degrees (North through East) ! Clean map min=-0.0098188 max=0.11123 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.207150Jy sigma=0.001207 ! Fit after self-cal, rms=0.205164Jy sigma=0.001207 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.205164Jy sigma=0.001207 ! Fit after self-cal, rms=0.205080Jy sigma=0.001206 ! Inverting map and beam ! Estimated beam: bmin=0.8642 mas, bmaj=2.324 mas, bpa=10.52 degrees ! Estimated noise=1533.58 mJy/beam. ! Added new window around map position (-1.4, 8.6). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0147418 Jy ! Component: 100 - total flux cleaned = 0.0193024 Jy ! Component: 150 - total flux cleaned = 0.0201384 Jy ! Component: 200 - total flux cleaned = 0.0206708 Jy ! Total flux subtracted in 200 components = 0.0206708 Jy ! Clean residual min=-0.008116 max=0.007570 Jy/beam ! Clean residual mean=0.000026 rms=0.002302 Jy/beam ! Combined flux in latest and established models = 0.180178 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 32 model components to the UV plane model. ! The established model now contains 70 components and 0.180178 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.204456Jy sigma=0.001201 ! Fit after self-cal, rms=0.204374Jy sigma=0.001201 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.204374Jy sigma=0.001201 ! Fit after self-cal, rms=0.202992Jy sigma=0.001199 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.202992Jy sigma=0.001199 ! Fit after self-cal, rms=0.202974Jy sigma=0.001199 ! Inverting map and beam ! Estimated beam: bmin=0.8463 mas, bmaj=2.287 mas, bpa=10.7 degrees ! Estimated noise=1513.31 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00258086 Jy ! Component: 100 - total flux cleaned = 0.00265706 Jy ! Component: 150 - total flux cleaned = 0.00272764 Jy ! Component: 200 - total flux cleaned = 0.00278636 Jy ! Total flux subtracted in 200 components = 0.00278636 Jy ! Clean residual min=-0.007228 max=0.006885 Jy/beam ! Clean residual mean=0.000009 rms=0.002103 Jy/beam ! Combined flux in latest and established models = 0.182964 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 79 components and 0.182964 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.202909Jy sigma=0.001198 ! Fit after self-cal, rms=0.202912Jy sigma=0.001198 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.633 mas, bmaj=10.23 mas, bpa=11.5 degrees ! Estimated noise=1924.93 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 9.94929e-05 Jy ! Component: 100 - total flux cleaned = 8.88662e-05 Jy ! Component: 150 - total flux cleaned = 4.99475e-05 Jy ! Component: 200 - total flux cleaned = -7.07369e-05 Jy ! Total flux subtracted in 200 components = -7.07369e-05 Jy ! Clean residual min=-0.008274 max=0.005483 Jy/beam ! Clean residual mean=0.000016 rms=0.002620 Jy/beam ! Combined flux in latest and established models = 0.182893 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 93 components and 0.182893 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.202923Jy sigma=0.001199 ! Fit after self-cal, rms=0.202927Jy sigma=0.001199 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6391 mas, bmaj=1.825 mas, bpa=10.29 degrees ! Estimated noise=2516.34 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.100959 Jy ! Component: 100 - total flux cleaned = 0.125561 Jy ! Component: 150 - total flux cleaned = 0.140341 Jy ! Component: 200 - total flux cleaned = 0.151421 Jy ! Total flux subtracted in 200 components = 0.151421 Jy ! Clean residual min=-0.011527 max=0.014930 Jy/beam ! Clean residual mean=-0.000017 rms=0.003223 Jy/beam ! Combined flux in latest and established models = 0.151421 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 0.151421 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8463 mas, bmaj=2.287 mas, bpa=10.7 degrees ! Estimated noise=1513.31 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.6, 23.4). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0166156 Jy ! Component: 100 - total flux cleaned = 0.0250056 Jy ! Component: 150 - total flux cleaned = 0.0292575 Jy ! Component: 200 - total flux cleaned = 0.0304233 Jy ! Total flux subtracted in 200 components = 0.0304233 Jy ! Clean residual min=-0.007055 max=0.006480 Jy/beam ! Clean residual mean=0.000005 rms=0.002005 Jy/beam ! Combined flux in latest and established models = 0.181844 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 66 components and 0.181844 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.633 mas, bmaj=10.23 mas, bpa=11.5 degrees ! Estimated noise=1924.93 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00232609 Jy ! Component: 100 - total flux cleaned = 0.00241757 Jy ! Component: 150 - total flux cleaned = 0.00249094 Jy ! Component: 200 - total flux cleaned = 0.00250205 Jy ! Total flux subtracted in 200 components = 0.00250205 Jy ! Clean residual min=-0.007929 max=0.005509 Jy/beam ! Clean residual mean=0.000010 rms=0.002592 Jy/beam ! Combined flux in latest and established models = 0.184346 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 83 components and 0.184346 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8463 mas, bmaj=2.287 mas, bpa=10.7 degrees ! Estimated noise=1513.31 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000119504 Jy ! Component: 100 - total flux cleaned = 0.000138 Jy ! Component: 150 - total flux cleaned = 0.000289637 Jy ! Component: 200 - total flux cleaned = 0.000482561 Jy ! Total flux subtracted in 200 components = 0.000482561 Jy ! Clean residual min=-0.006358 max=0.006283 Jy/beam ! Clean residual mean=0.000006 rms=0.001915 Jy/beam ! Combined flux in latest and established models = 0.184829 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 96 components and 0.184829 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.202603Jy sigma=0.001197 ! Fit after self-cal, rms=0.202559Jy sigma=0.001196 wmodel J0844-3742_X_2002_05_14_yyk\_map.mod ! Writing 96 model components to file: J0844-3742_X_2002_05_14_yyk_map.mod wobs J0844-3742_X_2002_05_14_yyk\_uvs.fits ! Writing UV FITS file: J0844-3742_X_2002_05_14_yyk_uvs.fits wwins J0844-3742_X_2002_05_14_yyk\_map.win ! wwins: Wrote 3 windows to J0844-3742_X_2002_05_14_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00106601 Jy ! Component: 100 - total flux cleaned = -0.00170546 Jy ! Component: 150 - total flux cleaned = -0.00171101 Jy ! Component: 200 - total flux cleaned = -0.0015271 Jy ! Component: 250 - total flux cleaned = -0.00135202 Jy ! Component: 300 - total flux cleaned = -0.00118564 Jy ! Component: 350 - total flux cleaned = -0.000948059 Jy ! Component: 400 - total flux cleaned = -0.000643876 Jy ! Component: 450 - total flux cleaned = -0.000205193 Jy ! Component: 500 - total flux cleaned = 0.00029076 Jy ! Component: 550 - total flux cleaned = 0.000635796 Jy ! Component: 600 - total flux cleaned = 0.00110274 Jy ! Component: 650 - total flux cleaned = 0.00149138 Jy ! Component: 700 - total flux cleaned = 0.00180652 Jy ! Component: 750 - total flux cleaned = 0.00217598 Jy ! Component: 800 - total flux cleaned = 0.00247767 Jy ! Component: 850 - total flux cleaned = 0.00271351 Jy ! Component: 900 - total flux cleaned = 0.00282864 Jy ! Component: 950 - total flux cleaned = 0.00288595 Jy ! Component: 1000 - total flux cleaned = 0.00277461 Jy ! Component: 1050 - total flux cleaned = 0.00277495 Jy ! Component: 1100 - total flux cleaned = 0.00282822 Jy ! Component: 1150 - total flux cleaned = 0.00282808 Jy ! Component: 1200 - total flux cleaned = 0.00277501 Jy ! Component: 1250 - total flux cleaned = 0.00277471 Jy ! Component: 1300 - total flux cleaned = 0.00267093 Jy ! Component: 1350 - total flux cleaned = 0.00256761 Jy ! Component: 1400 - total flux cleaned = 0.00220746 Jy ! Component: 1450 - total flux cleaned = 0.00189914 Jy ! Component: 1500 - total flux cleaned = 0.00169411 Jy ! Component: 1550 - total flux cleaned = 0.00133589 Jy ! Component: 1600 - total flux cleaned = 0.00112986 Jy ! Component: 1650 - total flux cleaned = 0.000821581 Jy ! Component: 1700 - total flux cleaned = 0.000562767 Jy ! Component: 1750 - total flux cleaned = 0.000354998 Jy ! Component: 1800 - total flux cleaned = 0.00014682 Jy ! Component: 1850 - total flux cleaned = -1.0653e-05 Jy ! Component: 1900 - total flux cleaned = -0.000117004 Jy ! Component: 1950 - total flux cleaned = -0.000277355 Jy ! Component: 2000 - total flux cleaned = -0.00038486 Jy ! Total flux subtracted in 2048 components = -0.000439655 Jy ! Clean residual min=-0.003393 max=0.003053 Jy/beam ! Clean residual mean=-0.000011 rms=0.001028 Jy/beam ! Combined flux in latest and established models = 0.184389 Jy keep ! Adding 111 model components to the UV plane model. ! The established model now contains 207 components and 0.184389 Jy ![Exited script file: muppet] wmap "J0844-3742_X_2002_05_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8463 x 2.287 at 10.7 degrees (North through East) ! Clean map min=-0.0041438 max=0.11596 Jy/beam ! Writing clean map to FITS file: J0844-3742_X_2002_05_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.115964 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0010396 device "J0844-3742_X_2002_05_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J0844-3742_X_2002_05_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.68946 2.68946 5.37891 10.7578 21.5157 43.0313 86.0626 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0031 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.115 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8463 x 2.287 at 10.7 degrees (North through East) ! Clean map min=-0.0041438 max=0.11596 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0844-3742_X_2002_05_14_yyk\_map.gif/gif" ! Attempting to open device: 'J0844-3742_X_2002_05_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0844-3742_X_2002_05_14_yyk_uvs.log closed on Tue Jun 26 22:33:10 2007