! Started logfile: J0806-3519_X_2002_01_31_yyk_uvs.log on Wed Jun 27 10:52:31 2007 obs J0806-3519_X_2002_01_31_yyk_uva.fits ! Reading UV FITS file: J0806-3519_X_2002_01_31_yyk_uva.fits ! AN table 1: 34 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.453595 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0806-3519 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40947e+09 8e+06 1 8e+06 ! 02 2 8.47947e+09 8e+06 1 8e+06 ! 03 3 8.79447e+09 8e+06 1 8e+06 ! 04 4 8.89947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1545 lines of history. ! ! Reading 2776 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 flag NL ! Flagging baselines of antenna 1:NL in the currently selected channels. ![@muppet J0806-3519_X_2002_01_31_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.228189 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7671 mas, bmaj=12.79 mas, bpa=24.69 degrees ! Estimated noise=3180.78 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0265277 Jy ! Component: 100 - total flux cleaned = 0.027612 Jy ! Total flux subtracted in 100 components = 0.027612 Jy ! Clean residual min=-0.010363 max=0.010361 Jy/beam ! Clean residual mean=-0.000056 rms=0.003836 Jy/beam ! Combined flux in latest and established models = 0.0276121 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.0276121 Jy ! ! Correcting IF 1. ! A total of 175 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 109 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 109 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 109 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.223552Jy sigma=0.001695 ! Fit after self-cal, rms=0.222884Jy sigma=0.001689 ! Inverting map and beam ! Estimated beam: bmin=0.7671 mas, bmaj=12.79 mas, bpa=24.69 degrees ! Estimated noise=3181.85 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.024 mas, bmaj=12.86 mas, bpa=24.71 degrees ! Estimated noise=1711.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0163281 Jy ! Component: 100 - total flux cleaned = 0.0126049 Jy ! Component: 150 - total flux cleaned = 0.011379 Jy ! Component: 200 - total flux cleaned = 0.00933537 Jy ! Total flux subtracted in 200 components = 0.00933537 Jy ! Clean residual min=-0.003954 max=0.003911 Jy/beam ! Clean residual mean=-0.000079 rms=0.001842 Jy/beam ! Combined flux in latest and established models = 0.0369474 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 70 model components to the UV plane model. ! The established model now contains 103 components and 0.0369474 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.220825Jy sigma=0.001669 ! Fit after self-cal, rms=0.220796Jy sigma=0.001669 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.024 x 12.86 at 24.71 degrees (North through East) ! Clean map min=-0.0090539 max=0.029398 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.220796Jy sigma=0.001669 ! Fit after self-cal, rms=0.220796Jy sigma=0.001669 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.220796Jy sigma=0.001669 ! Fit after self-cal, rms=0.220797Jy sigma=0.001669 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.024 mas, bmaj=12.86 mas, bpa=24.71 degrees ! Estimated noise=1711.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00133645 Jy ! Component: 100 - total flux cleaned = -0.000453561 Jy ! Component: 150 - total flux cleaned = -0.00185729 Jy ! Component: 200 - total flux cleaned = -0.00229155 Jy ! Total flux subtracted in 200 components = -0.00229155 Jy ! Clean residual min=-0.002545 max=0.002560 Jy/beam ! Clean residual mean=-0.000032 rms=0.001085 Jy/beam ! Combined flux in latest and established models = 0.0346559 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 59 model components to the UV plane model. ! The established model now contains 154 components and 0.0346559 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.220423Jy sigma=0.001666 ! Fit after self-cal, rms=0.220408Jy sigma=0.001666 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.220408Jy sigma=0.001666 ! Fit after self-cal, rms=0.219065Jy sigma=0.001655 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00285429 Jy ! Component: 100 - total flux cleaned = 0.00154286 Jy ! Component: 150 - total flux cleaned = -0.00104669 Jy ! Component: 200 - total flux cleaned = -0.00254005 Jy ! Total flux subtracted in 200 components = -0.00254005 Jy ! Clean residual min=-0.002200 max=0.002194 Jy/beam ! Clean residual mean=-0.000045 rms=0.000925 Jy/beam ! Combined flux in latest and established models = 0.0321158 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 67 model components to the UV plane model. ! The established model now contains 220 components and 0.0321158 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.218553Jy sigma=0.001650 ! Fit after self-cal, rms=0.217750Jy sigma=0.001645 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.024 x 12.86 at 24.71 degrees (North through East) ! Clean map min=-0.0087648 max=0.034437 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.144 mas, bmaj=15.92 mas, bpa=15.52 degrees ! Estimated noise=1970.99 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000403765 Jy ! Component: 100 - total flux cleaned = 0.000221641 Jy ! Component: 150 - total flux cleaned = 0.000235052 Jy ! Component: 200 - total flux cleaned = 0.000831852 Jy ! Total flux subtracted in 200 components = 0.000831852 Jy ! Clean residual min=-0.001749 max=0.001746 Jy/beam ! Clean residual mean=-0.000014 rms=0.000851 Jy/beam ! Combined flux in latest and established models = 0.0329477 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 89 model components to the UV plane model. ! The established model now contains 306 components and 0.0329477 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.217534Jy sigma=0.001644 ! Fit after self-cal, rms=0.217584Jy sigma=0.001644 ! Inverting map ! Added new window around map position (14.4, -23). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0056535 Jy ! Component: 100 - total flux cleaned = 0.00755438 Jy ! Component: 150 - total flux cleaned = 0.00957147 Jy ! Component: 200 - total flux cleaned = 0.0114708 Jy ! Total flux subtracted in 200 components = 0.0114708 Jy ! Clean residual min=-0.004100 max=0.002703 Jy/beam ! Clean residual mean=0.000001 rms=0.001107 Jy/beam ! Combined flux in latest and established models = 0.0444185 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 60 model components to the UV plane model. ! The established model now contains 366 components and 0.0444185 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.217406Jy sigma=0.001642 ! Fit after self-cal, rms=0.217309Jy sigma=0.001641 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7671 mas, bmaj=12.79 mas, bpa=24.69 degrees ! Estimated noise=3181.85 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0287248 Jy ! Component: 100 - total flux cleaned = 0.0338757 Jy ! Component: 150 - total flux cleaned = 0.0346354 Jy ! Component: 200 - total flux cleaned = 0.037843 Jy ! Total flux subtracted in 200 components = 0.037843 Jy ! Clean residual min=-0.012533 max=0.024118 Jy/beam ! Clean residual mean=-0.000284 rms=0.004657 Jy/beam ! Combined flux in latest and established models = 0.0378431 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 62 model components to the UV plane model. ! The established model now contains 62 components and 0.0378431 Jy ! Inverting map and beam ! Estimated beam: bmin=1.024 mas, bmaj=12.86 mas, bpa=24.71 degrees ! Estimated noise=1711.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.4, -0.8). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0088994 Jy ! Component: 100 - total flux cleaned = 0.00669139 Jy ! Component: 150 - total flux cleaned = 0.00374883 Jy ! Component: 200 - total flux cleaned = 0.00445634 Jy ! Total flux subtracted in 200 components = 0.00445634 Jy ! Clean residual min=-0.006662 max=0.007461 Jy/beam ! Clean residual mean=-0.000062 rms=0.002065 Jy/beam ! Combined flux in latest and established models = 0.0422994 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 106 components and 0.0422994 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.144 mas, bmaj=15.92 mas, bpa=15.52 degrees ! Estimated noise=1970.99 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00132001 Jy ! Component: 100 - total flux cleaned = 0.000855869 Jy ! Component: 150 - total flux cleaned = 0.0021472 Jy ! Component: 200 - total flux cleaned = 0.00305872 Jy ! Total flux subtracted in 200 components = 0.00305872 Jy ! Clean residual min=-0.004322 max=0.005638 Jy/beam ! Clean residual mean=-0.000025 rms=0.001580 Jy/beam ! Combined flux in latest and established models = 0.0453581 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 160 components and 0.0453581 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.024 mas, bmaj=12.86 mas, bpa=24.71 degrees ! Estimated noise=1711.64 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00265323 Jy ! Component: 100 - total flux cleaned = -0.00396561 Jy ! Component: 150 - total flux cleaned = -0.00413548 Jy ! Component: 200 - total flux cleaned = -0.00412415 Jy ! Total flux subtracted in 200 components = -0.00412415 Jy ! Clean residual min=-0.004845 max=0.005222 Jy/beam ! Clean residual mean=-0.000014 rms=0.001200 Jy/beam ! Combined flux in latest and established models = 0.041234 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 55 model components to the UV plane model. ! The established model now contains 210 components and 0.041234 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.217669Jy sigma=0.001644 ! Fit after self-cal, rms=0.217493Jy sigma=0.001643 wmodel J0806-3519_X_2002_01_31_yyk\_map.mod ! Writing 210 model components to file: J0806-3519_X_2002_01_31_yyk_map.mod wobs J0806-3519_X_2002_01_31_yyk\_uvs.fits ! Applying 34 buffered edits. ! Writing UV FITS file: J0806-3519_X_2002_01_31_yyk_uvs.fits wwins J0806-3519_X_2002_01_31_yyk\_map.win ! wwins: Wrote 2 windows to J0806-3519_X_2002_01_31_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00171899 Jy ! Component: 100 - total flux cleaned = -0.00239926 Jy ! Component: 150 - total flux cleaned = -0.00300761 Jy ! Component: 200 - total flux cleaned = -0.0034996 Jy ! Component: 250 - total flux cleaned = -0.00366671 Jy ! Component: 300 - total flux cleaned = -0.0036159 Jy ! Component: 350 - total flux cleaned = -0.00356636 Jy ! Component: 400 - total flux cleaned = -0.00380812 Jy ! Component: 450 - total flux cleaned = -0.00385429 Jy ! Component: 500 - total flux cleaned = -0.00394519 Jy ! Component: 550 - total flux cleaned = -0.00403251 Jy ! Component: 600 - total flux cleaned = -0.00403181 Jy ! Component: 650 - total flux cleaned = -0.00407406 Jy ! Component: 700 - total flux cleaned = -0.00415603 Jy ! Component: 750 - total flux cleaned = -0.00419569 Jy ! Component: 800 - total flux cleaned = -0.00427232 Jy ! Component: 850 - total flux cleaned = -0.00442152 Jy ! Component: 900 - total flux cleaned = -0.004642 Jy ! Component: 950 - total flux cleaned = -0.00496477 Jy ! Component: 1000 - total flux cleaned = -0.00510502 Jy ! Component: 1050 - total flux cleaned = -0.00531183 Jy ! Component: 1100 - total flux cleaned = -0.0055484 Jy ! Component: 1150 - total flux cleaned = -0.00564786 Jy ! Component: 1200 - total flux cleaned = -0.00577874 Jy ! Component: 1250 - total flux cleaned = -0.00587556 Jy ! Component: 1300 - total flux cleaned = -0.00593928 Jy ! Component: 1350 - total flux cleaned = -0.00600169 Jy ! Component: 1400 - total flux cleaned = -0.00606341 Jy ! Component: 1450 - total flux cleaned = -0.00612432 Jy ! Component: 1500 - total flux cleaned = -0.00621496 Jy ! Component: 1550 - total flux cleaned = -0.00624479 Jy ! Component: 1600 - total flux cleaned = -0.00642241 Jy ! Component: 1650 - total flux cleaned = -0.00653989 Jy ! Component: 1700 - total flux cleaned = -0.00665633 Jy ! Component: 1750 - total flux cleaned = -0.00682972 Jy ! Component: 1800 - total flux cleaned = -0.00700184 Jy ! Component: 1850 - total flux cleaned = -0.00711594 Jy ! Component: 1900 - total flux cleaned = -0.00728609 Jy ! Component: 1950 - total flux cleaned = -0.0074272 Jy ! Component: 2000 - total flux cleaned = -0.00762374 Jy ! Total flux subtracted in 2048 components = -0.00773552 Jy ! Clean residual min=-0.001551 max=0.001441 Jy/beam ! Clean residual mean=-0.000024 rms=0.000604 Jy/beam ! Combined flux in latest and established models = 0.0334985 Jy keep ! Adding 135 model components to the UV plane model. ! The established model now contains 344 components and 0.0334984 Jy ![Exited script file: muppet] wmap "J0806-3519_X_2002_01_31_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.024 x 12.86 at 24.71 degrees (North through East) ! Clean map min=-0.010012 max=0.034508 Jy/beam ! Writing clean map to FITS file: J0806-3519_X_2002_01_31_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0345084 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000598925 device "J0806-3519_X_2002_01_31_yyk\_map.eps/VPS" ! Attempting to open device: 'J0806-3519_X_2002_01_31_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -5.20677 5.20677 10.4135 20.8271 41.6542 83.3084 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.034 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.024 x 12.86 at 24.71 degrees (North through East) ! Clean map min=-0.010012 max=0.034508 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0806-3519_X_2002_01_31_yyk\_map.gif/gif" ! Attempting to open device: 'J0806-3519_X_2002_01_31_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0806-3519_X_2002_01_31_yyk_uvs.log closed on Wed Jun 27 10:52:39 2007