! Started logfile: J0802-3810_X_2002_01_31_yyk_uvs.log on Wed Jun 27 10:52:23 2007
obs J0802-3810_X_2002_01_31_yyk_uva.fits
! Reading UV FITS file: J0802-3810_X_2002_01_31_yyk_uva.fits
! AN table 1: 34 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.447059 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J0802-3810
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40947e+09        8e+06          1        8e+06
!  02        2  8.47947e+09        8e+06          1        8e+06
!  03        3  8.79447e+09        8e+06          1        8e+06
!  04        4  8.89947e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 1545 lines of history.
! 
! Reading 2736 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
flag NL
! Flagging baselines of antenna 1:NL in the currently selected channels.
![@muppet J0802-3810_X_2002_01_31_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.208967 Jy 
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7689 mas, bmaj=11.79 mas, bpa=24.95 degrees
! Estimated noise=4875.24 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0208494 Jy
! Component: 100  -  total flux cleaned = 0.0329533 Jy
! Total flux subtracted in 100 components = 0.0329533 Jy
! Clean residual min=-0.012784 max=0.012894 Jy/beam
! Clean residual mean=0.000133 rms=0.005159 Jy/beam
! Combined flux in latest and established models = 0.0329533 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 32 model components to the UV plane model.
! The established model now contains 32 components and 0.0329533 Jy
! 
! Correcting IF 1.
!  A total of 144 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 340 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 144 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 144 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.204868Jy  sigma=0.001626
! Fit after  self-cal, rms=0.203667Jy  sigma=0.001614
! Inverting map and beam 
! Estimated beam: bmin=0.7689 mas, bmaj=11.78 mas, bpa=24.95 degrees
! Estimated noise=4880.36 mJy/beam.
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.011 mas, bmaj=11.44 mas, bpa=24.64 degrees
! Estimated noise=2180.73 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0118068 Jy
! Component: 100  -  total flux cleaned = 0.0154433 Jy
! Component: 150  -  total flux cleaned = 0.0158878 Jy
! Component: 200  -  total flux cleaned = 0.01426 Jy
! Total flux subtracted in 200 components = 0.01426 Jy
! Clean residual min=-0.004929 max=0.004853 Jy/beam
! Clean residual mean=-0.000003 rms=0.001943 Jy/beam
! Combined flux in latest and established models = 0.0472133 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 71 model components to the UV plane model.
! The established model now contains 103 components and 0.0472133 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.201587Jy  sigma=0.001596
! Fit after  self-cal, rms=0.201360Jy  sigma=0.001594
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.011 x 11.44 at 24.64 degrees (North through East)
! Clean map  min=-0.0094594  max=0.027405 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.00*    FD        0.00*    HN        0.00*    KP        0.00*    
!   LA        0.00*    MK        0.00*    NL        0.00*    OV        0.00*    
!   PT        0.00*    SC        0.00*    
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.201360Jy  sigma=0.001594
! Fit after  self-cal, rms=0.201360Jy  sigma=0.001594
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.201360Jy  sigma=0.001594
! Fit after  self-cal, rms=0.201349Jy  sigma=0.001594
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.011 mas, bmaj=11.44 mas, bpa=24.64 degrees
! Estimated noise=2180.73 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00111991 Jy
! Component: 100  -  total flux cleaned = 0.00119091 Jy
! Component: 150  -  total flux cleaned = 0.00200089 Jy
! Component: 200  -  total flux cleaned = 0.00225709 Jy
! Total flux subtracted in 200 components = 0.00225709 Jy
! Clean residual min=-0.002845 max=0.002864 Jy/beam
! Clean residual mean=0.000012 rms=0.001158 Jy/beam
! Combined flux in latest and established models = 0.0494704 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 51 model components to the UV plane model.
! The established model now contains 152 components and 0.0494704 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.200638Jy  sigma=0.001588
! Fit after  self-cal, rms=0.200584Jy  sigma=0.001588
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.200584Jy  sigma=0.001588
! Fit after  self-cal, rms=0.199559Jy  sigma=0.001577
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00237288 Jy
! Component: 100  -  total flux cleaned = -0.00194772 Jy
! Component: 150  -  total flux cleaned = -0.00196331 Jy
! Component: 200  -  total flux cleaned = -0.00265797 Jy
! Total flux subtracted in 200 components = -0.00265797 Jy
! Clean residual min=-0.002823 max=0.002797 Jy/beam
! Clean residual mean=-0.000003 rms=0.001194 Jy/beam
! Combined flux in latest and established models = 0.0468124 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 58 model components to the UV plane model.
! The established model now contains 210 components and 0.0468124 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.198560Jy  sigma=0.001570
! Fit after  self-cal, rms=0.197868Jy  sigma=0.001563
! Inverting map 
! Added new window around map position (3.4, 9.2).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00276544 Jy
! Component: 100  -  total flux cleaned = 0.00393882 Jy
! Component: 150  -  total flux cleaned = 0.00525031 Jy
! Component: 200  -  total flux cleaned = 0.00571622 Jy
! Total flux subtracted in 200 components = 0.00571622 Jy
! Clean residual min=-0.003931 max=0.004070 Jy/beam
! Clean residual mean=0.000057 rms=0.001246 Jy/beam
! Combined flux in latest and established models = 0.0525286 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 44 model components to the UV plane model.
! The established model now contains 254 components and 0.0525286 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.197417Jy  sigma=0.001560
! Fit after  self-cal, rms=0.197176Jy  sigma=0.001558
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.011 x 11.44 at 24.64 degrees (North through East)
! Clean map  min=-0.011359  max=0.027677 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.379 mas, bmaj=17.56 mas, bpa=11 degrees
! Estimated noise=2535.13 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000626277 Jy
! Component: 100  -  total flux cleaned = 0.000294263 Jy
! Component: 150  -  total flux cleaned = 8.85974e-05 Jy
! Component: 200  -  total flux cleaned = -8.39963e-05 Jy
! Total flux subtracted in 200 components = -8.39963e-05 Jy
! Clean residual min=-0.002801 max=0.002992 Jy/beam
! Clean residual mean=0.000078 rms=0.000922 Jy/beam
! Combined flux in latest and established models = 0.0524446 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 31 model components to the UV plane model.
! The established model now contains 283 components and 0.0524447 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.197077Jy  sigma=0.001557
! Fit after  self-cal, rms=0.196937Jy  sigma=0.001556
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7689 mas, bmaj=11.78 mas, bpa=24.95 degrees
! Estimated noise=4880.36 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0385325 Jy
! Component: 100  -  total flux cleaned = 0.0479564 Jy
! Component: 150  -  total flux cleaned = 0.0521929 Jy
! Component: 200  -  total flux cleaned = 0.0579927 Jy
! Total flux subtracted in 200 components = 0.0579927 Jy
! Clean residual min=-0.017886 max=0.022543 Jy/beam
! Clean residual mean=0.000269 rms=0.005763 Jy/beam
! Combined flux in latest and established models = 0.0579927 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 47 model components to the UV plane model.
! The established model now contains 47 components and 0.0579927 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.011 mas, bmaj=11.44 mas, bpa=24.64 degrees
! Estimated noise=2180.73 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0100511 Jy
! Component: 100  -  total flux cleaned = 0.0133189 Jy
! Component: 150  -  total flux cleaned = 0.0154667 Jy
! Component: 200  -  total flux cleaned = 0.0176149 Jy
! Total flux subtracted in 200 components = 0.0176149 Jy
! Clean residual min=-0.015303 max=0.014011 Jy/beam
! Clean residual mean=0.000303 rms=0.004609 Jy/beam
! Combined flux in latest and established models = 0.0756076 Jy
! Adding 44 model components to the UV plane model.
! The established model now contains 91 components and 0.0756076 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.379 mas, bmaj=17.56 mas, bpa=11 degrees
! Estimated noise=2535.13 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000635891 Jy
! Component: 100  -  total flux cleaned = 0.000418664 Jy
! Component: 150  -  total flux cleaned = 0.00124489 Jy
! Component: 200  -  total flux cleaned = 0.0013799 Jy
! Total flux subtracted in 200 components = 0.0013799 Jy
! Clean residual min=-0.014582 max=0.014981 Jy/beam
! Clean residual mean=0.000434 rms=0.005041 Jy/beam
! Combined flux in latest and established models = 0.0769875 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 119 components and 0.0769876 Jy
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.011 mas, bmaj=11.44 mas, bpa=24.64 degrees
! Estimated noise=2180.73 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000583784 Jy
! Component: 100  -  total flux cleaned = 0.000607335 Jy
! Component: 150  -  total flux cleaned = 0.000856598 Jy
! Component: 200  -  total flux cleaned = 0.00108608 Jy
! Total flux subtracted in 200 components = 0.00108608 Jy
! Clean residual min=-0.013604 max=0.013175 Jy/beam
! Clean residual mean=0.000300 rms=0.003905 Jy/beam
! Combined flux in latest and established models = 0.0780736 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 30 model components to the UV plane model.
! The established model now contains 142 components and 0.0780736 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.198557Jy  sigma=0.001570
! Fit after  self-cal, rms=0.198086Jy  sigma=0.001566
wmodel J0802-3810_X_2002_01_31_yyk\_map.mod
! Writing 142 model components to file: J0802-3810_X_2002_01_31_yyk_map.mod
wobs J0802-3810_X_2002_01_31_yyk\_uvs.fits
! Applying 34 buffered edits.
! Writing UV FITS file: J0802-3810_X_2002_01_31_yyk_uvs.fits
wwins J0802-3810_X_2002_01_31_yyk\_map.win
! wwins: Wrote 1 windows to J0802-3810_X_2002_01_31_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00449583 Jy
! Component: 100  -  total flux cleaned = 0.00424337 Jy
! Component: 150  -  total flux cleaned = 0.00274997 Jy
! Component: 200  -  total flux cleaned = 0.00197428 Jy
! Component: 250  -  total flux cleaned = 0.000833289 Jy
! Component: 300  -  total flux cleaned = 0.000141963 Jy
! Component: 350  -  total flux cleaned = -0.000519348 Jy
! Component: 400  -  total flux cleaned = -0.000972751 Jy
! Component: 450  -  total flux cleaned = -0.00123432 Jy
! Component: 500  -  total flux cleaned = -0.00148796 Jy
! Component: 550  -  total flux cleaned = -0.00173085 Jy
! Component: 600  -  total flux cleaned = -0.00204556 Jy
! Component: 650  -  total flux cleaned = -0.00235024 Jy
! Component: 700  -  total flux cleaned = -0.0025742 Jy
! Component: 750  -  total flux cleaned = -0.00264712 Jy
! Component: 800  -  total flux cleaned = -0.00257602 Jy
! Component: 850  -  total flux cleaned = -0.00250649 Jy
! Component: 900  -  total flux cleaned = -0.00223366 Jy
! Component: 950  -  total flux cleaned = -0.00176244 Jy
! Component: 1000  -  total flux cleaned = -0.00142995 Jy
! Component: 1050  -  total flux cleaned = -0.000969827 Jy
! Component: 1100  -  total flux cleaned = -0.000579265 Jy
! Component: 1150  -  total flux cleaned = -0.000128329 Jy
! Component: 1200  -  total flux cleaned = 6.36505e-05 Jy
! Component: 1250  -  total flux cleaned = 0.00038027 Jy
! Component: 1300  -  total flux cleaned = 0.000569689 Jy
! Component: 1350  -  total flux cleaned = 0.000632392 Jy
! Component: 1400  -  total flux cleaned = 0.000632353 Jy
! Component: 1450  -  total flux cleaned = 0.000694827 Jy
! Component: 1500  -  total flux cleaned = 0.000883074 Jy
! Component: 1550  -  total flux cleaned = 0.000945758 Jy
! Component: 1600  -  total flux cleaned = 0.00119653 Jy
! Component: 1650  -  total flux cleaned = 0.00132197 Jy
! Component: 1700  -  total flux cleaned = 0.00138474 Jy
! Component: 1750  -  total flux cleaned = 0.00138528 Jy
! Component: 1800  -  total flux cleaned = 0.00144992 Jy
! Component: 1850  -  total flux cleaned = 0.00144982 Jy
! Component: 1900  -  total flux cleaned = 0.00151458 Jy
! Component: 1950  -  total flux cleaned = 0.00164563 Jy
! Component: 2000  -  total flux cleaned = 0.0019129 Jy
! Total flux subtracted in 2048 components = 0.00218256 Jy
! Clean residual min=-0.003705 max=0.003967 Jy/beam
! Clean residual mean=0.000066 rms=0.001334 Jy/beam
! Combined flux in latest and established models = 0.0802562 Jy
keep
! Adding 97 model components to the UV plane model.
! The established model now contains 239 components and 0.0802562 Jy
![Exited script file: muppet]
wmap "J0802-3810_X_2002_01_31_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.011 x 11.44 at 24.64 degrees (North through East)
! Clean map  min=-0.016866  max=0.03165 Jy/beam
! Writing clean map to FITS file: J0802-3810_X_2002_01_31_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0316498 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00148577 
device "J0802-3810_X_2002_01_31_yyk\_map.eps/VPS"
! Attempting to open device: 'J0802-3810_X_2002_01_31_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -14.0832 14.0832 28.1663 56.3327
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0044 
print "peak=",int(peak_flux*1000)/1000
! peak= 0.031 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.011 x 11.44 at 24.64 degrees (North through East)
! Clean map  min=-0.016866  max=0.03165 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J0802-3810_X_2002_01_31_yyk\_map.gif/gif"
! Attempting to open device: 'J0802-3810_X_2002_01_31_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J0802-3810_X_2002_01_31_yyk_uvs.log closed on Wed Jun 27 10:52:31 2007