! Started logfile: J0752-3940_X_2002_01_31_yyk_uvs.log on Wed Jun 27 10:52:04 2007 obs J0752-3940_X_2002_01_31_yyk_uva.fits ! Reading UV FITS file: J0752-3940_X_2002_01_31_yyk_uva.fits ! AN table 1: 34 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.596732 visibilities/baseline/integration-bin. ! Found source: J0752-3940 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40947e+09 8e+06 1 8e+06 ! 02 2 8.47947e+09 8e+06 1 8e+06 ! 03 3 8.79447e+09 8e+06 1 8e+06 ! 04 4 8.89947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1544 lines of history. ! ! Reading 3652 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 flag NL ! Flagging baselines of antenna 1:NL in the currently selected channels. ![@muppet J0752-3940_X_2002_01_31_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.204722 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6028 mas, bmaj=1.814 mas, bpa=6.434 degrees ! Estimated noise=3394.5 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0250983 Jy ! Component: 100 - total flux cleaned = 0.031342 Jy ! Total flux subtracted in 100 components = 0.031342 Jy ! Clean residual min=-0.010797 max=0.010684 Jy/beam ! Clean residual mean=-0.000001 rms=0.004229 Jy/beam ! Combined flux in latest and established models = 0.031342 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.031342 Jy ! ! Correcting IF 1. ! A total of 111 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 144 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 111 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 208 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.200451Jy sigma=0.001557 ! Fit after self-cal, rms=0.200034Jy sigma=0.001553 ! Inverting map and beam ! Estimated beam: bmin=0.6029 mas, bmaj=1.822 mas, bpa=5.784 degrees ! Estimated noise=2714.9 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8356 mas, bmaj=2.276 mas, bpa=7.312 degrees ! Estimated noise=1895.95 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0143272 Jy ! Component: 100 - total flux cleaned = 0.0153011 Jy ! Component: 150 - total flux cleaned = 0.0153028 Jy ! Component: 200 - total flux cleaned = 0.0159339 Jy ! Total flux subtracted in 200 components = 0.0159339 Jy ! Clean residual min=-0.003887 max=0.003850 Jy/beam ! Clean residual mean=0.000034 rms=0.001434 Jy/beam ! Combined flux in latest and established models = 0.0472758 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 47 model components to the UV plane model. ! The established model now contains 76 components and 0.0472758 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.198279Jy sigma=0.001537 ! Fit after self-cal, rms=0.198232Jy sigma=0.001537 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8356 x 2.276 at 7.312 degrees (North through East) ! Clean map min=-0.0065164 max=0.014945 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.198232Jy sigma=0.001537 ! Fit after self-cal, rms=0.198232Jy sigma=0.001537 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.198232Jy sigma=0.001537 ! Fit after self-cal, rms=0.198232Jy sigma=0.001537 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8356 mas, bmaj=2.276 mas, bpa=7.312 degrees ! Estimated noise=1895.95 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0021915 Jy ! Component: 100 - total flux cleaned = 0.00352922 Jy ! Component: 150 - total flux cleaned = 0.00394114 Jy ! Component: 200 - total flux cleaned = 0.00337158 Jy ! Total flux subtracted in 200 components = 0.00337158 Jy ! Clean residual min=-0.002301 max=0.002301 Jy/beam ! Clean residual mean=0.000018 rms=0.000909 Jy/beam ! Combined flux in latest and established models = 0.0506474 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 49 model components to the UV plane model. ! The established model now contains 121 components and 0.0506474 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.197823Jy sigma=0.001534 ! Fit after self-cal, rms=0.197817Jy sigma=0.001534 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.197817Jy sigma=0.001534 ! Fit after self-cal, rms=0.196376Jy sigma=0.001523 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00193724 Jy ! Component: 100 - total flux cleaned = 0.000104485 Jy ! Component: 150 - total flux cleaned = 0.00207814 Jy ! Component: 200 - total flux cleaned = 0.00334346 Jy ! Total flux subtracted in 200 components = 0.00334346 Jy ! Clean residual min=-0.003049 max=0.003029 Jy/beam ! Clean residual mean=0.000008 rms=0.001114 Jy/beam ! Combined flux in latest and established models = 0.0539909 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 43 model components to the UV plane model. ! The established model now contains 163 components and 0.0539909 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.195520Jy sigma=0.001517 ! Fit after self-cal, rms=0.195287Jy sigma=0.001515 ! Inverting map ! Added new window around map position (0.4, -25). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00366354 Jy ! Component: 100 - total flux cleaned = 0.00427781 Jy ! Component: 150 - total flux cleaned = 0.00472114 Jy ! Component: 200 - total flux cleaned = 0.00500663 Jy ! Total flux subtracted in 200 components = 0.00500663 Jy ! Clean residual min=-0.004606 max=0.004785 Jy/beam ! Clean residual mean=0.000015 rms=0.001470 Jy/beam ! Combined flux in latest and established models = 0.0589975 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 178 components and 0.0589975 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.195084Jy sigma=0.001514 ! Fit after self-cal, rms=0.195053Jy sigma=0.001513 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8356 x 2.276 at 7.312 degrees (North through East) ! Clean map min=-0.0088541 max=0.014845 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.069 mas, bmaj=11.98 mas, bpa=7.67 degrees ! Estimated noise=2436.88 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00161785 Jy ! Component: 100 - total flux cleaned = 0.00174905 Jy ! Component: 150 - total flux cleaned = 0.00182852 Jy ! Component: 200 - total flux cleaned = 0.00194188 Jy ! Total flux subtracted in 200 components = 0.00194188 Jy ! Clean residual min=-0.005038 max=0.004347 Jy/beam ! Clean residual mean=0.000027 rms=0.001815 Jy/beam ! Combined flux in latest and established models = 0.0609394 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 4 model components to the UV plane model. ! The established model now contains 181 components and 0.0609394 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.195045Jy sigma=0.001513 ! Fit after self-cal, rms=0.195080Jy sigma=0.001513 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6029 mas, bmaj=1.822 mas, bpa=5.784 degrees ! Estimated noise=2714.9 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0009964 Jy ! Component: 100 - total flux cleaned = 0.000535855 Jy ! Component: 150 - total flux cleaned = 0.000822878 Jy ! Component: 200 - total flux cleaned = 0.00126811 Jy ! Total flux subtracted in 200 components = 0.00126811 Jy ! Clean residual min=-0.019535 max=0.031252 Jy/beam ! Clean residual mean=-0.000075 rms=0.006549 Jy/beam ! Combined flux in latest and established models = 0.00126811 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.00126811 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8356 mas, bmaj=2.276 mas, bpa=7.312 degrees ! Estimated noise=1895.95 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0445819 Jy ! Component: 100 - total flux cleaned = 0.0588759 Jy ! Component: 150 - total flux cleaned = 0.0666144 Jy ! Component: 200 - total flux cleaned = 0.0693957 Jy ! Total flux subtracted in 200 components = 0.0693957 Jy ! Clean residual min=-0.015121 max=0.015472 Jy/beam ! Clean residual mean=0.000042 rms=0.004127 Jy/beam ! Combined flux in latest and established models = 0.0706637 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 48 components and 0.0706638 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.069 mas, bmaj=11.98 mas, bpa=7.67 degrees ! Estimated noise=2436.88 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00326168 Jy ! Component: 100 - total flux cleaned = 0.00389409 Jy ! Component: 150 - total flux cleaned = 0.00378511 Jy ! Component: 200 - total flux cleaned = 0.00367801 Jy ! Total flux subtracted in 200 components = 0.00367801 Jy ! Clean residual min=-0.014849 max=0.015990 Jy/beam ! Clean residual mean=0.000103 rms=0.005842 Jy/beam ! Combined flux in latest and established models = 0.0743418 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 53 components and 0.0743418 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8356 mas, bmaj=2.276 mas, bpa=7.312 degrees ! Estimated noise=1895.95 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00163223 Jy ! Component: 100 - total flux cleaned = -0.0015108 Jy ! Component: 150 - total flux cleaned = -0.00126736 Jy ! Component: 200 - total flux cleaned = -0.00115613 Jy ! Total flux subtracted in 200 components = -0.00115613 Jy ! Clean residual min=-0.014016 max=0.014739 Jy/beam ! Clean residual mean=0.000046 rms=0.004007 Jy/beam ! Combined flux in latest and established models = 0.0731856 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 68 components and 0.0731856 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.197608Jy sigma=0.001532 ! Fit after self-cal, rms=0.196691Jy sigma=0.001525 wmodel J0752-3940_X_2002_01_31_yyk\_map.mod ! Writing 68 model components to file: J0752-3940_X_2002_01_31_yyk_map.mod wobs J0752-3940_X_2002_01_31_yyk\_uvs.fits ! Applying 34 buffered edits. ! Writing UV FITS file: J0752-3940_X_2002_01_31_yyk_uvs.fits wwins J0752-3940_X_2002_01_31_yyk\_map.win ! wwins: Wrote 2 windows to J0752-3940_X_2002_01_31_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00148024 Jy ! Component: 100 - total flux cleaned = -0.00161322 Jy ! Component: 150 - total flux cleaned = -0.00147558 Jy ! Component: 200 - total flux cleaned = -0.00134934 Jy ! Component: 250 - total flux cleaned = -0.000996076 Jy ! Component: 300 - total flux cleaned = -0.0011069 Jy ! Component: 350 - total flux cleaned = -0.000891019 Jy ! Component: 400 - total flux cleaned = -0.000688699 Jy ! Component: 450 - total flux cleaned = -0.000594512 Jy ! Component: 500 - total flux cleaned = -0.00041123 Jy ! Component: 550 - total flux cleaned = -0.000411949 Jy ! Component: 600 - total flux cleaned = -0.000160833 Jy ! Component: 650 - total flux cleaned = -8.24167e-05 Jy ! Component: 700 - total flux cleaned = 0.000227818 Jy ! Component: 750 - total flux cleaned = 0.000525615 Jy ! Component: 800 - total flux cleaned = 0.000743107 Jy ! Component: 850 - total flux cleaned = 0.00130413 Jy ! Component: 900 - total flux cleaned = 0.00177869 Jy ! Component: 950 - total flux cleaned = 0.00237378 Jy ! Component: 1000 - total flux cleaned = 0.00288925 Jy ! Component: 1050 - total flux cleaned = 0.0033302 Jy ! Component: 1100 - total flux cleaned = 0.00388637 Jy ! Component: 1150 - total flux cleaned = 0.00424944 Jy ! Component: 1200 - total flux cleaned = 0.00466552 Jy ! Component: 1250 - total flux cleaned = 0.00495789 Jy ! Component: 1300 - total flux cleaned = 0.00524685 Jy ! Component: 1350 - total flux cleaned = 0.00547525 Jy ! Component: 1400 - total flux cleaned = 0.00575967 Jy ! Component: 1450 - total flux cleaned = 0.0061 Jy ! Component: 1500 - total flux cleaned = 0.00638246 Jy ! Component: 1550 - total flux cleaned = 0.00660819 Jy ! Component: 1600 - total flux cleaned = 0.00700217 Jy ! Component: 1650 - total flux cleaned = 0.00733962 Jy ! Component: 1700 - total flux cleaned = 0.007677 Jy ! Component: 1750 - total flux cleaned = 0.00801354 Jy ! Component: 1800 - total flux cleaned = 0.00829421 Jy ! Component: 1850 - total flux cleaned = 0.00868709 Jy ! Component: 1900 - total flux cleaned = 0.00913704 Jy ! Component: 1950 - total flux cleaned = 0.0094184 Jy ! Component: 2000 - total flux cleaned = 0.00981326 Jy ! Total flux subtracted in 2048 components = 0.0101521 Jy ! Clean residual min=-0.002945 max=0.003217 Jy/beam ! Clean residual mean=0.000003 rms=0.001022 Jy/beam ! Combined flux in latest and established models = 0.0833378 Jy keep ! Adding 97 model components to the UV plane model. ! The established model now contains 165 components and 0.0833378 Jy ![Exited script file: muppet] wmap "J0752-3940_X_2002_01_31_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8356 x 2.276 at 7.312 degrees (North through East) ! Clean map min=-0.010657 max=0.029076 Jy/beam ! Writing clean map to FITS file: J0752-3940_X_2002_01_31_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0290764 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00105705 device "J0752-3940_X_2002_01_31_yyk\_map.eps/VPS" ! Attempting to open device: 'J0752-3940_X_2002_01_31_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -10.9063 10.9063 21.8125 43.6251 87.2501 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0031 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.029 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8356 x 2.276 at 7.312 degrees (North through East) ! Clean map min=-0.010657 max=0.029076 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0752-3940_X_2002_01_31_yyk\_map.gif/gif" ! Attempting to open device: 'J0752-3940_X_2002_01_31_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0752-3940_X_2002_01_31_yyk_uvs.log closed on Wed Jun 27 10:52:11 2007