! Started logfile: J0752-3940_S_2002_05_14_yyk_uvs.log on Tue Jun 26 22:29:04 2007 obs J0752-3940_S_2002_05_14_yyk_uva.fits ! Reading UV FITS file: J0752-3940_S_2002_05_14_yyk_uva.fits ! AN table 1: 36 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.442593 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0752-3940 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22947e+09 8e+06 1 8e+06 ! 02 2 2.25947e+09 8e+06 1 8e+06 ! 03 3 2.34947e+09 8e+06 1 8e+06 ! 04 4 2.36947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 2868 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0752-3940_S_2002_05_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.295343 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.273 mas, bmaj=6.632 mas, bpa=6.281 degrees ! Estimated noise=4728.91 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0355269 Jy ! Component: 100 - total flux cleaned = 0.0366006 Jy ! Total flux subtracted in 100 components = 0.0366006 Jy ! Clean residual min=-0.011466 max=0.011579 Jy/beam ! Clean residual mean=0.000078 rms=0.004317 Jy/beam ! Combined flux in latest and established models = 0.0366006 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.0366006 Jy ! ! Correcting IF 1. ! A total of 360 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 151 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 115 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 115 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.289001Jy sigma=0.001505 ! Fit after self-cal, rms=0.288794Jy sigma=0.001503 ! Inverting map and beam ! Estimated beam: bmin=2.273 mas, bmaj=6.632 mas, bpa=6.281 degrees ! Estimated noise=4728.91 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.932 mas, bmaj=7.979 mas, bpa=9.585 degrees ! Estimated noise=2910.67 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0144835 Jy ! Component: 100 - total flux cleaned = 0.0138511 Jy ! Component: 150 - total flux cleaned = 0.012318 Jy ! Component: 200 - total flux cleaned = 0.00972444 Jy ! Total flux subtracted in 200 components = 0.00972444 Jy ! Clean residual min=-0.005179 max=0.005200 Jy/beam ! Clean residual mean=-0.000291 rms=0.002064 Jy/beam ! Combined flux in latest and established models = 0.046325 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 56 model components to the UV plane model. ! The established model now contains 82 components and 0.046325 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.286738Jy sigma=0.001492 ! Fit after self-cal, rms=0.286597Jy sigma=0.001491 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.932 x 7.979 at 9.585 degrees (North through East) ! Clean map min=-0.013533 max=0.044383 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* NL 0.00* OV 0.00* PT 0.00* ! SC 0.00* MK 0.00* ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Fit before self-cal, rms=0.286597Jy sigma=0.001491 ! Fit after self-cal, rms=0.286660Jy sigma=0.001491 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.286660Jy sigma=0.001491 ! Fit after self-cal, rms=0.286660Jy sigma=0.001491 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.932 mas, bmaj=7.981 mas, bpa=9.541 degrees ! Estimated noise=2912.9 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00103344 Jy ! Component: 100 - total flux cleaned = -0.00244397 Jy ! Component: 150 - total flux cleaned = -0.00341232 Jy ! Component: 200 - total flux cleaned = -0.00402961 Jy ! Total flux subtracted in 200 components = -0.00402961 Jy ! Clean residual min=-0.003755 max=0.003753 Jy/beam ! Clean residual mean=-0.000431 rms=0.001315 Jy/beam ! Combined flux in latest and established models = 0.0422954 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 43 model components to the UV plane model. ! The established model now contains 120 components and 0.0422954 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.286184Jy sigma=0.001489 ! Fit after self-cal, rms=0.286154Jy sigma=0.001488 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.286154Jy sigma=0.001488 ! Fit after self-cal, rms=0.284902Jy sigma=0.001481 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0113544 Jy ! Component: 100 - total flux cleaned = -0.0153373 Jy ! Component: 150 - total flux cleaned = -0.0179352 Jy ! Component: 200 - total flux cleaned = -0.0194095 Jy ! Total flux subtracted in 200 components = -0.0194095 Jy ! Clean residual min=-0.003435 max=0.003462 Jy/beam ! Clean residual mean=-0.000239 rms=0.001376 Jy/beam ! Combined flux in latest and established models = 0.022886 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 47 model components to the UV plane model. ! The established model now contains 165 components and 0.022886 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.284178Jy sigma=0.001477 ! Fit after self-cal, rms=0.283797Jy sigma=0.001474 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.932 x 7.981 at 9.541 degrees (North through East) ! Clean map min=-0.01347 max=0.046158 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=10.15 mas, bmaj=33.83 mas, bpa=11.68 degrees ! Estimated noise=3837.82 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00776355 Jy ! Component: 100 - total flux cleaned = -0.00832872 Jy ! Component: 150 - total flux cleaned = -0.00849812 Jy ! Component: 200 - total flux cleaned = -0.00913799 Jy ! Total flux subtracted in 200 components = -0.00913799 Jy ! Clean residual min=-0.001634 max=0.001576 Jy/beam ! Clean residual mean=0.000125 rms=0.000747 Jy/beam ! Combined flux in latest and established models = 0.013748 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 59 model components to the UV plane model. ! The established model now contains 222 components and 0.013748 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.283488Jy sigma=0.001473 ! Fit after self-cal, rms=0.283416Jy sigma=0.001472 ! Inverting map ! Added new window around map position (11, 62.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.004315 Jy ! Component: 100 - total flux cleaned = 0.00623926 Jy ! Component: 150 - total flux cleaned = 0.00699895 Jy ! Component: 200 - total flux cleaned = 0.00721735 Jy ! Total flux subtracted in 200 components = 0.00721735 Jy ! Clean residual min=-0.002343 max=0.002716 Jy/beam ! Clean residual mean=0.000068 rms=0.000762 Jy/beam ! Combined flux in latest and established models = 0.0209653 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 248 components and 0.0209653 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.283341Jy sigma=0.001472 ! Fit after self-cal, rms=0.283355Jy sigma=0.001471 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.274 mas, bmaj=6.632 mas, bpa=6.281 degrees ! Estimated noise=4740 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0351595 Jy ! Component: 100 - total flux cleaned = 0.0328623 Jy ! Component: 150 - total flux cleaned = 0.0344468 Jy ! Component: 200 - total flux cleaned = 0.0374152 Jy ! Total flux subtracted in 200 components = 0.0374152 Jy ! Clean residual min=-0.015054 max=0.018992 Jy/beam ! Clean residual mean=0.000166 rms=0.004202 Jy/beam ! Combined flux in latest and established models = 0.0374152 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 44 model components to the UV plane model. ! The established model now contains 44 components and 0.0374152 Jy ! Inverting map and beam ! Estimated beam: bmin=2.932 mas, bmaj=7.981 mas, bpa=9.541 degrees ! Estimated noise=2912.9 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0154811 Jy ! Component: 100 - total flux cleaned = 0.0207949 Jy ! Component: 150 - total flux cleaned = 0.0237753 Jy ! Component: 200 - total flux cleaned = 0.0251102 Jy ! Total flux subtracted in 200 components = 0.0251102 Jy ! Clean residual min=-0.015614 max=0.018415 Jy/beam ! Clean residual mean=-0.000023 rms=0.003166 Jy/beam ! Combined flux in latest and established models = 0.0625254 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 92 components and 0.0625254 Jy ! Inverting map ! Added new window around map position (-64, 20). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.010287 Jy ! Component: 100 - total flux cleaned = 0.0108778 Jy ! Component: 150 - total flux cleaned = 0.0125862 Jy ! Component: 200 - total flux cleaned = 0.0143262 Jy ! Total flux subtracted in 200 components = 0.0143262 Jy ! Clean residual min=-0.012225 max=0.007664 Jy/beam ! Clean residual mean=0.000097 rms=0.002199 Jy/beam ! Combined flux in latest and established models = 0.0768516 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 121 components and 0.0768516 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=10.15 mas, bmaj=33.83 mas, bpa=11.68 degrees ! Estimated noise=3837.82 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00432449 Jy ! Component: 100 - total flux cleaned = 0.00493079 Jy ! Component: 150 - total flux cleaned = 0.0052484 Jy ! Component: 200 - total flux cleaned = 0.00515502 Jy ! Total flux subtracted in 200 components = 0.00515502 Jy ! Clean residual min=-0.009514 max=0.004408 Jy/beam ! Clean residual mean=-0.000049 rms=0.001863 Jy/beam ! Combined flux in latest and established models = 0.0820066 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 158 components and 0.0820066 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.932 mas, bmaj=7.981 mas, bpa=9.541 degrees ! Estimated noise=2912.9 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000229746 Jy ! Component: 100 - total flux cleaned = 5.12786e-05 Jy ! Component: 150 - total flux cleaned = -0.000268956 Jy ! Component: 200 - total flux cleaned = -0.000417058 Jy ! Total flux subtracted in 200 components = -0.000417058 Jy ! Clean residual min=-0.011582 max=0.006589 Jy/beam ! Clean residual mean=-0.000002 rms=0.001874 Jy/beam ! Combined flux in latest and established models = 0.0815896 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 35 model components to the UV plane model. ! The established model now contains 183 components and 0.0815896 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.283984Jy sigma=0.001475 ! Fit after self-cal, rms=0.283527Jy sigma=0.001473 wmodel J0752-3940_S_2002_05_14_yyk\_map.mod ! Writing 183 model components to file: J0752-3940_S_2002_05_14_yyk_map.mod wobs J0752-3940_S_2002_05_14_yyk\_uvs.fits ! Writing UV FITS file: J0752-3940_S_2002_05_14_yyk_uvs.fits wwins J0752-3940_S_2002_05_14_yyk\_map.win ! wwins: Wrote 2 windows to J0752-3940_S_2002_05_14_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00315539 Jy ! Component: 100 - total flux cleaned = -0.0059221 Jy ! Component: 150 - total flux cleaned = -0.00753254 Jy ! Component: 200 - total flux cleaned = -0.00856284 Jy ! Component: 250 - total flux cleaned = -0.00926946 Jy ! Component: 300 - total flux cleaned = -0.00993935 Jy ! Component: 350 - total flux cleaned = -0.010815 Jy ! Component: 400 - total flux cleaned = -0.0118914 Jy ! Component: 450 - total flux cleaned = -0.0128566 Jy ! Component: 500 - total flux cleaned = -0.0137187 Jy ! Component: 550 - total flux cleaned = -0.0144852 Jy ! Component: 600 - total flux cleaned = -0.0153012 Jy ! Component: 650 - total flux cleaned = -0.0158325 Jy ! Component: 700 - total flux cleaned = -0.0160278 Jy ! Component: 750 - total flux cleaned = -0.0162213 Jy ! Component: 800 - total flux cleaned = -0.0164765 Jy ! Component: 850 - total flux cleaned = -0.0163496 Jy ! Component: 900 - total flux cleaned = -0.0163504 Jy ! Component: 950 - total flux cleaned = -0.0164142 Jy ! Component: 1000 - total flux cleaned = -0.0164149 Jy ! Component: 1050 - total flux cleaned = -0.016349 Jy ! Component: 1100 - total flux cleaned = -0.016217 Jy ! Component: 1150 - total flux cleaned = -0.0160169 Jy ! Component: 1200 - total flux cleaned = -0.0158812 Jy ! Component: 1250 - total flux cleaned = -0.0158116 Jy ! Component: 1300 - total flux cleaned = -0.015879 Jy ! Component: 1350 - total flux cleaned = -0.0158787 Jy ! Component: 1400 - total flux cleaned = -0.0158093 Jy ! Component: 1450 - total flux cleaned = -0.0158828 Jy ! Component: 1500 - total flux cleaned = -0.0158839 Jy ! Component: 1550 - total flux cleaned = -0.0158825 Jy ! Component: 1600 - total flux cleaned = -0.0159585 Jy ! Component: 1650 - total flux cleaned = -0.0159589 Jy ! Component: 1700 - total flux cleaned = -0.0159596 Jy ! Component: 1750 - total flux cleaned = -0.0159586 Jy ! Component: 1800 - total flux cleaned = -0.0159583 Jy ! Component: 1850 - total flux cleaned = -0.0159585 Jy ! Component: 1900 - total flux cleaned = -0.0158689 Jy ! Component: 1950 - total flux cleaned = -0.0158673 Jy ! Component: 2000 - total flux cleaned = -0.0158663 Jy ! Total flux subtracted in 2048 components = -0.0158659 Jy ! Clean residual min=-0.006134 max=0.007136 Jy/beam ! Clean residual mean=-0.000110 rms=0.001922 Jy/beam ! Combined flux in latest and established models = 0.0657236 Jy keep ! Adding 79 model components to the UV plane model. ! The established model now contains 262 components and 0.0657236 Jy ![Exited script file: muppet] wmap "J0752-3940_S_2002_05_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.932 x 7.981 at 9.541 degrees (North through East) ! Clean map min=-0.017586 max=0.035445 Jy/beam ! Writing clean map to FITS file: J0752-3940_S_2002_05_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0354446 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0020747 device "J0752-3940_S_2002_05_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J0752-3940_S_2002_05_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -17.5601 17.5601 35.1202 70.2404 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0062 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.035 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.932 x 7.981 at 9.541 degrees (North through East) ! Clean map min=-0.017586 max=0.035445 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0752-3940_S_2002_05_14_yyk\_map.gif/gif" ! Attempting to open device: 'J0752-3940_S_2002_05_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0752-3940_S_2002_05_14_yyk_uvs.log closed on Tue Jun 26 22:29:10 2007