! Started logfile: J0743-3803_X_2002_05_14_yyk_uvs.log on Tue Jun 26 22:27:57 2007 obs J0743-3803_X_2002_05_14_yyk_uva.fits ! Reading UV FITS file: J0743-3803_X_2002_05_14_yyk_uva.fits ! AN table 1: 36 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.735185 visibilities/baseline/integration-bin. ! Found source: J0743-3803 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40947e+09 8e+06 1 8e+06 ! 02 2 8.47947e+09 8e+06 1 8e+06 ! 03 3 8.79447e+09 8e+06 1 8e+06 ! 04 4 8.89947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1076 lines of history. ! ! Reading 4764 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0743-3803_X_2002_05_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.258408 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6521 mas, bmaj=1.765 mas, bpa=13.12 degrees ! Estimated noise=3327.92 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0885325 Jy ! Component: 100 - total flux cleaned = 0.126018 Jy ! Total flux subtracted in 100 components = 0.126018 Jy ! Clean residual min=-0.015897 max=0.018569 Jy/beam ! Clean residual mean=0.000005 rms=0.004768 Jy/beam ! Combined flux in latest and established models = 0.126018 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.126018 Jy ! ! Correcting IF 1. ! A total of 49 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 49 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 85 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 49 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.226514Jy sigma=0.001314 ! Fit after self-cal, rms=0.226393Jy sigma=0.001313 ! Inverting map and beam ! Estimated beam: bmin=0.6521 mas, bmaj=1.765 mas, bpa=13.12 degrees ! Estimated noise=3327.92 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9874 mas, bmaj=2.618 mas, bpa=12.85 degrees ! Estimated noise=1672.98 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0276786 Jy ! Component: 100 - total flux cleaned = 0.0372864 Jy ! Component: 150 - total flux cleaned = 0.0408738 Jy ! Component: 200 - total flux cleaned = 0.0412722 Jy ! Total flux subtracted in 200 components = 0.0412722 Jy ! Clean residual min=-0.013529 max=0.012090 Jy/beam ! Clean residual mean=-0.000093 rms=0.003838 Jy/beam ! Combined flux in latest and established models = 0.16729 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 31 components and 0.16729 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.224977Jy sigma=0.001298 ! Fit after self-cal, rms=0.224961Jy sigma=0.001298 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9874 x 2.618 at 12.85 degrees (North through East) ! Clean map min=-0.013155 max=0.10975 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Fit before self-cal, rms=0.224961Jy sigma=0.001298 ! Fit after self-cal, rms=0.224961Jy sigma=0.001298 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.224961Jy sigma=0.001298 ! Fit after self-cal, rms=0.224956Jy sigma=0.001298 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9874 mas, bmaj=2.618 mas, bpa=12.85 degrees ! Estimated noise=1672.98 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000513139 Jy ! Component: 100 - total flux cleaned = 0.000639488 Jy ! Component: 150 - total flux cleaned = 0.000820431 Jy ! Component: 200 - total flux cleaned = 0.000936136 Jy ! Total flux subtracted in 200 components = 0.000936136 Jy ! Clean residual min=-0.013449 max=0.012047 Jy/beam ! Clean residual mean=-0.000096 rms=0.003807 Jy/beam ! Combined flux in latest and established models = 0.168226 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 33 components and 0.168226 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.224941Jy sigma=0.001298 ! Fit after self-cal, rms=0.224927Jy sigma=0.001298 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.224927Jy sigma=0.001298 ! Fit after self-cal, rms=0.223583Jy sigma=0.001289 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00311536 Jy ! Component: 100 - total flux cleaned = 0.00359477 Jy ! Component: 150 - total flux cleaned = 0.00375309 Jy ! Component: 200 - total flux cleaned = 0.00389416 Jy ! Total flux subtracted in 200 components = 0.00389416 Jy ! Clean residual min=-0.012405 max=0.013110 Jy/beam ! Clean residual mean=-0.000101 rms=0.003701 Jy/beam ! Combined flux in latest and established models = 0.17212 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 36 components and 0.17212 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.223538Jy sigma=0.001288 ! Fit after self-cal, rms=0.223345Jy sigma=0.001287 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9874 x 2.618 at 12.85 degrees (North through East) ! Clean map min=-0.012145 max=0.10834 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.223345Jy sigma=0.001287 ! Fit after self-cal, rms=0.223345Jy sigma=0.001287 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.223345Jy sigma=0.001287 ! Fit after self-cal, rms=0.223312Jy sigma=0.001287 ! Inverting map and beam ! Estimated beam: bmin=0.9874 mas, bmaj=2.618 mas, bpa=12.85 degrees ! Estimated noise=1672.98 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000740763 Jy ! Component: 100 - total flux cleaned = 0.0008184 Jy ! Component: 150 - total flux cleaned = 0.00103957 Jy ! Component: 200 - total flux cleaned = 0.00110631 Jy ! Total flux subtracted in 200 components = 0.00110631 Jy ! Clean residual min=-0.012155 max=0.013543 Jy/beam ! Clean residual mean=-0.000103 rms=0.003660 Jy/beam ! Combined flux in latest and established models = 0.173227 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 37 components and 0.173227 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.223269Jy sigma=0.001286 ! Fit after self-cal, rms=0.223245Jy sigma=0.001286 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.223245Jy sigma=0.001286 ! Fit after self-cal, rms=0.223245Jy sigma=0.001286 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.223245Jy sigma=0.001286 ! Fit after self-cal, rms=0.223240Jy sigma=0.001286 ! Inverting map and beam ! Estimated beam: bmin=0.9874 mas, bmaj=2.618 mas, bpa=12.85 degrees ! Estimated noise=1672.98 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000440075 Jy ! Component: 100 - total flux cleaned = 0.000440157 Jy ! Component: 150 - total flux cleaned = 0.00043269 Jy ! Component: 200 - total flux cleaned = 0.000547821 Jy ! Total flux subtracted in 200 components = 0.000547821 Jy ! Clean residual min=-0.012093 max=0.013548 Jy/beam ! Clean residual mean=-0.000105 rms=0.003639 Jy/beam ! Combined flux in latest and established models = 0.173775 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 37 components and 0.173775 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.223213Jy sigma=0.001286 ! Fit after self-cal, rms=0.223202Jy sigma=0.001286 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.625 mas, bmaj=11.62 mas, bpa=13.89 degrees ! Estimated noise=1990.71 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00330076 Jy ! Component: 100 - total flux cleaned = 0.00349538 Jy ! Component: 150 - total flux cleaned = 0.00377277 Jy ! Component: 200 - total flux cleaned = 0.004042 Jy ! Total flux subtracted in 200 components = 0.004042 Jy ! Clean residual min=-0.014465 max=0.013188 Jy/beam ! Clean residual mean=-0.000188 rms=0.004759 Jy/beam ! Combined flux in latest and established models = 0.177817 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 4 model components to the UV plane model. ! The established model now contains 37 components and 0.177817 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.223244Jy sigma=0.001286 ! Fit after self-cal, rms=0.223222Jy sigma=0.001286 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6521 mas, bmaj=1.765 mas, bpa=13.12 degrees ! Estimated noise=3327.92 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0911384 Jy ! Component: 100 - total flux cleaned = 0.127433 Jy ! Component: 150 - total flux cleaned = 0.14568 Jy ! Component: 200 - total flux cleaned = 0.155803 Jy ! Total flux subtracted in 200 components = 0.155803 Jy ! Clean residual min=-0.014301 max=0.016771 Jy/beam ! Clean residual mean=-0.000030 rms=0.004481 Jy/beam ! Combined flux in latest and established models = 0.155803 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.155803 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9874 mas, bmaj=2.618 mas, bpa=12.85 degrees ! Estimated noise=1672.98 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0134957 Jy ! Component: 100 - total flux cleaned = 0.0138783 Jy ! Component: 150 - total flux cleaned = 0.0146507 Jy ! Component: 200 - total flux cleaned = 0.0151514 Jy ! Total flux subtracted in 200 components = 0.0151514 Jy ! Clean residual min=-0.012872 max=0.013500 Jy/beam ! Clean residual mean=-0.000097 rms=0.003775 Jy/beam ! Combined flux in latest and established models = 0.170954 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 30 components and 0.170954 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.625 mas, bmaj=11.62 mas, bpa=13.89 degrees ! Estimated noise=1990.71 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00379985 Jy ! Component: 100 - total flux cleaned = 0.00419323 Jy ! Component: 150 - total flux cleaned = 0.00456732 Jy ! Component: 200 - total flux cleaned = 0.0049229 Jy ! Total flux subtracted in 200 components = 0.0049229 Jy ! Clean residual min=-0.014785 max=0.013306 Jy/beam ! Clean residual mean=-0.000179 rms=0.004869 Jy/beam ! Combined flux in latest and established models = 0.175877 Jy ! Adding 5 model components to the UV plane model. ! The established model now contains 30 components and 0.175877 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9874 mas, bmaj=2.618 mas, bpa=12.85 degrees ! Estimated noise=1672.98 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00266641 Jy ! Component: 100 - total flux cleaned = -0.00266817 Jy ! Component: 150 - total flux cleaned = -0.00254577 Jy ! Component: 200 - total flux cleaned = -0.00248489 Jy ! Total flux subtracted in 200 components = -0.00248489 Jy ! Clean residual min=-0.011944 max=0.013403 Jy/beam ! Clean residual mean=-0.000104 rms=0.003674 Jy/beam ! Combined flux in latest and established models = 0.173392 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 34 components and 0.173392 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.223222Jy sigma=0.001286 ! Fit after self-cal, rms=0.223201Jy sigma=0.001286 wmodel J0743-3803_X_2002_05_14_yyk\_map.mod ! Writing 34 model components to file: J0743-3803_X_2002_05_14_yyk_map.mod wobs J0743-3803_X_2002_05_14_yyk\_uvs.fits ! Writing UV FITS file: J0743-3803_X_2002_05_14_yyk_uvs.fits wwins J0743-3803_X_2002_05_14_yyk\_map.win ! wwins: Wrote 1 windows to J0743-3803_X_2002_05_14_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00130701 Jy ! Component: 100 - total flux cleaned = 0.00263683 Jy ! Component: 150 - total flux cleaned = 0.00413649 Jy ! Component: 200 - total flux cleaned = 0.00583413 Jy ! Component: 250 - total flux cleaned = 0.00684389 Jy ! Component: 300 - total flux cleaned = 0.00778603 Jy ! Component: 350 - total flux cleaned = 0.00881203 Jy ! Component: 400 - total flux cleaned = 0.010033 Jy ! Component: 450 - total flux cleaned = 0.0113111 Jy ! Component: 500 - total flux cleaned = 0.0123072 Jy ! Component: 550 - total flux cleaned = 0.0132577 Jy ! Component: 600 - total flux cleaned = 0.014064 Jy ! Component: 650 - total flux cleaned = 0.0145497 Jy ! Component: 700 - total flux cleaned = 0.0148323 Jy ! Component: 750 - total flux cleaned = 0.0151042 Jy ! Component: 800 - total flux cleaned = 0.0153641 Jy ! Component: 850 - total flux cleaned = 0.0152841 Jy ! Component: 900 - total flux cleaned = 0.0151227 Jy ! Component: 950 - total flux cleaned = 0.0149648 Jy ! Component: 1000 - total flux cleaned = 0.0148101 Jy ! Component: 1050 - total flux cleaned = 0.0144379 Jy ! Component: 1100 - total flux cleaned = 0.0141492 Jy ! Component: 1150 - total flux cleaned = 0.0140064 Jy ! Component: 1200 - total flux cleaned = 0.0135275 Jy ! Component: 1250 - total flux cleaned = 0.0131257 Jy ! Component: 1300 - total flux cleaned = 0.012602 Jy ! Component: 1350 - total flux cleaned = 0.0122192 Jy ! Component: 1400 - total flux cleaned = 0.0118472 Jy ! Component: 1450 - total flux cleaned = 0.0117251 Jy ! Component: 1500 - total flux cleaned = 0.0116059 Jy ! Component: 1550 - total flux cleaned = 0.0115492 Jy ! Component: 1600 - total flux cleaned = 0.0114342 Jy ! Component: 1650 - total flux cleaned = 0.0113229 Jy ! Component: 1700 - total flux cleaned = 0.0110485 Jy ! Component: 1750 - total flux cleaned = 0.0106711 Jy ! Component: 1800 - total flux cleaned = 0.0104597 Jy ! Component: 1850 - total flux cleaned = 0.00999301 Jy ! Component: 1900 - total flux cleaned = 0.00994275 Jy ! Component: 1950 - total flux cleaned = 0.00979237 Jy ! Component: 2000 - total flux cleaned = 0.00969373 Jy ! Total flux subtracted in 2048 components = 0.00940173 Jy ! Clean residual min=-0.002750 max=0.002881 Jy/beam ! Clean residual mean=-0.000053 rms=0.000954 Jy/beam ! Combined flux in latest and established models = 0.182794 Jy keep ! Adding 118 model components to the UV plane model. ! The established model now contains 152 components and 0.182794 Jy ![Exited script file: muppet] wmap "J0743-3803_X_2002_05_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9874 x 2.618 at 12.85 degrees (North through East) ! Clean map min=-0.005576 max=0.10896 Jy/beam ! Writing clean map to FITS file: J0743-3803_X_2002_05_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.108962 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000931892 device "J0743-3803_X_2002_05_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J0743-3803_X_2002_05_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.56573 2.56573 5.13145 10.2629 20.5258 41.0516 82.1033 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0027 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.108 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9874 x 2.618 at 12.85 degrees (North through East) ! Clean map min=-0.005576 max=0.10896 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0743-3803_X_2002_05_14_yyk\_map.gif/gif" ! Attempting to open device: 'J0743-3803_X_2002_05_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0743-3803_X_2002_05_14_yyk_uvs.log closed on Tue Jun 26 22:28:04 2007