! Started logfile: J0743-3803_S_2002_05_14_yyk_uvs.log on Tue Jun 26 22:27:44 2007 obs J0743-3803_S_2002_05_14_yyk_uva.fits ! Reading UV FITS file: J0743-3803_S_2002_05_14_yyk_uva.fits ! AN table 1: 36 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.735185 visibilities/baseline/integration-bin. ! Found source: J0743-3803 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22947e+09 8e+06 1 8e+06 ! 02 2 2.25947e+09 8e+06 1 8e+06 ! 03 3 2.34947e+09 8e+06 1 8e+06 ! 04 4 2.36947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1153 lines of history. ! ! Reading 4764 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0743-3803_S_2002_05_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.305265 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.532 mas, bmaj=7.231 mas, bpa=11.32 degrees ! Estimated noise=5018.38 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, -0.5). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0843139 Jy ! Component: 100 - total flux cleaned = 0.120817 Jy ! Total flux subtracted in 100 components = 0.120817 Jy ! Clean residual min=-0.026913 max=0.026283 Jy/beam ! Clean residual mean=0.000397 rms=0.008404 Jy/beam ! Combined flux in latest and established models = 0.120817 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.120817 Jy ! ! Correcting IF 1. ! A total of 49 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 147 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 49 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 111 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.279875Jy sigma=0.001363 ! Fit after self-cal, rms=0.279621Jy sigma=0.001361 ! Inverting map and beam ! Estimated beam: bmin=2.532 mas, bmaj=7.231 mas, bpa=11.32 degrees ! Estimated noise=5018.38 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.121 mas, bmaj=11.55 mas, bpa=14.49 degrees ! Estimated noise=2185.97 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0355915 Jy ! Component: 100 - total flux cleaned = 0.046672 Jy ! Component: 150 - total flux cleaned = 0.0509082 Jy ! Component: 200 - total flux cleaned = 0.0514617 Jy ! Total flux subtracted in 200 components = 0.0514617 Jy ! Clean residual min=-0.007332 max=0.010325 Jy/beam ! Clean residual mean=0.000822 rms=0.002934 Jy/beam ! Combined flux in latest and established models = 0.172279 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 38 components and 0.172279 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.277361Jy sigma=0.001343 ! Fit after self-cal, rms=0.277316Jy sigma=0.001343 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.121 x 11.55 at 14.49 degrees (North through East) ! Clean map min=-0.0075003 max=0.089706 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Fit before self-cal, rms=0.277316Jy sigma=0.001343 ! Fit after self-cal, rms=0.277316Jy sigma=0.001343 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.277316Jy sigma=0.001343 ! Fit after self-cal, rms=0.277311Jy sigma=0.001343 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.121 mas, bmaj=11.55 mas, bpa=14.49 degrees ! Estimated noise=2185.97 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 6.36268e-05 Jy ! Component: 100 - total flux cleaned = 0.000514943 Jy ! Component: 150 - total flux cleaned = 0.000897065 Jy ! Component: 200 - total flux cleaned = 0.00117243 Jy ! Total flux subtracted in 200 components = 0.00117243 Jy ! Clean residual min=-0.007629 max=0.010311 Jy/beam ! Clean residual mean=0.000812 rms=0.002875 Jy/beam ! Combined flux in latest and established models = 0.173451 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 45 components and 0.173451 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.277257Jy sigma=0.001343 ! Fit after self-cal, rms=0.277245Jy sigma=0.001343 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.277245Jy sigma=0.001343 ! Fit after self-cal, rms=0.275652Jy sigma=0.001334 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00416974 Jy ! Component: 100 - total flux cleaned = 0.00492111 Jy ! Component: 150 - total flux cleaned = 0.00526811 Jy ! Component: 200 - total flux cleaned = 0.00556611 Jy ! Total flux subtracted in 200 components = 0.00556611 Jy ! Clean residual min=-0.007455 max=0.010050 Jy/beam ! Clean residual mean=0.000780 rms=0.002664 Jy/beam ! Combined flux in latest and established models = 0.179017 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 51 components and 0.179017 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.275520Jy sigma=0.001333 ! Fit after self-cal, rms=0.275210Jy sigma=0.001332 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.121 x 11.55 at 14.49 degrees (North through East) ! Clean map min=-0.0071594 max=0.089048 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.55 mas, bmaj=43.14 mas, bpa=14.56 degrees ! Estimated noise=2475.85 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00215614 Jy ! Component: 100 - total flux cleaned = 0.00236231 Jy ! Component: 150 - total flux cleaned = 0.00261494 Jy ! Component: 200 - total flux cleaned = 0.00278975 Jy ! Total flux subtracted in 200 components = 0.00278975 Jy ! Clean residual min=-0.005014 max=0.009103 Jy/beam ! Clean residual mean=0.001113 rms=0.002700 Jy/beam ! Combined flux in latest and established models = 0.181807 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 3 model components to the UV plane model. ! The established model now contains 51 components and 0.181807 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.275168Jy sigma=0.001332 ! Fit after self-cal, rms=0.275135Jy sigma=0.001332 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.532 mas, bmaj=7.231 mas, bpa=11.32 degrees ! Estimated noise=5018.38 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0897479 Jy ! Component: 100 - total flux cleaned = 0.128143 Jy ! Component: 150 - total flux cleaned = 0.148751 Jy ! Component: 200 - total flux cleaned = 0.154908 Jy ! Total flux subtracted in 200 components = 0.154908 Jy ! Clean residual min=-0.029541 max=0.024307 Jy/beam ! Clean residual mean=0.000270 rms=0.008390 Jy/beam ! Combined flux in latest and established models = 0.154908 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.154908 Jy ! Inverting map and beam ! Estimated beam: bmin=4.121 mas, bmaj=11.55 mas, bpa=14.49 degrees ! Estimated noise=2185.97 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4, -3). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0220868 Jy ! Component: 100 - total flux cleaned = 0.0281164 Jy ! Component: 150 - total flux cleaned = 0.0291604 Jy ! Component: 200 - total flux cleaned = 0.029848 Jy ! Total flux subtracted in 200 components = 0.029848 Jy ! Clean residual min=-0.005973 max=0.010974 Jy/beam ! Clean residual mean=0.000693 rms=0.002297 Jy/beam ! Combined flux in latest and established models = 0.184756 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 39 components and 0.184756 Jy ! Inverting map ! Added new window around map position (-54.5, -62). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00585324 Jy ! Component: 100 - total flux cleaned = 0.00562513 Jy ! Component: 150 - total flux cleaned = 0.00507337 Jy ! Component: 200 - total flux cleaned = 0.00475183 Jy ! Total flux subtracted in 200 components = 0.00475183 Jy ! Clean residual min=-0.005454 max=0.006625 Jy/beam ! Clean residual mean=0.000723 rms=0.001946 Jy/beam ! Combined flux in latest and established models = 0.189508 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 57 components and 0.189508 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.55 mas, bmaj=43.14 mas, bpa=14.56 degrees ! Estimated noise=2475.85 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000698571 Jy ! Component: 100 - total flux cleaned = 0.000782871 Jy ! Component: 150 - total flux cleaned = 0.000997601 Jy ! Component: 200 - total flux cleaned = 0.00106371 Jy ! Total flux subtracted in 200 components = 0.00106371 Jy ! Clean residual min=-0.003133 max=0.006051 Jy/beam ! Clean residual mean=0.001054 rms=0.001733 Jy/beam ! Combined flux in latest and established models = 0.190571 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 71 components and 0.190571 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.121 mas, bmaj=11.55 mas, bpa=14.49 degrees ! Estimated noise=2185.97 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000140638 Jy ! Component: 100 - total flux cleaned = -0.000112847 Jy ! Component: 150 - total flux cleaned = -0.00033423 Jy ! Component: 200 - total flux cleaned = -0.000440327 Jy ! Total flux subtracted in 200 components = -0.000440327 Jy ! Clean residual min=-0.004830 max=0.006630 Jy/beam ! Clean residual mean=0.000730 rms=0.001822 Jy/beam ! Combined flux in latest and established models = 0.190131 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 81 components and 0.190131 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.274020Jy sigma=0.001327 ! Fit after self-cal, rms=0.273820Jy sigma=0.001326 wmodel J0743-3803_S_2002_05_14_yyk\_map.mod ! Writing 81 model components to file: J0743-3803_S_2002_05_14_yyk_map.mod wobs J0743-3803_S_2002_05_14_yyk\_uvs.fits ! Writing UV FITS file: J0743-3803_S_2002_05_14_yyk_uvs.fits wwins J0743-3803_S_2002_05_14_yyk\_map.win ! wwins: Wrote 3 windows to J0743-3803_S_2002_05_14_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00322918 Jy ! Component: 100 - total flux cleaned = 0.006016 Jy ! Component: 150 - total flux cleaned = 0.00857141 Jy ! Component: 200 - total flux cleaned = 0.0109379 Jy ! Component: 250 - total flux cleaned = 0.0131478 Jy ! Component: 300 - total flux cleaned = 0.0149112 Jy ! Component: 350 - total flux cleaned = 0.0166086 Jy ! Component: 400 - total flux cleaned = 0.0182497 Jy ! Component: 450 - total flux cleaned = 0.0198415 Jy ! Component: 500 - total flux cleaned = 0.0214605 Jy ! Component: 550 - total flux cleaned = 0.0229618 Jy ! Component: 600 - total flux cleaned = 0.0243545 Jy ! Component: 650 - total flux cleaned = 0.0253065 Jy ! Component: 700 - total flux cleaned = 0.0262389 Jy ! Component: 750 - total flux cleaned = 0.0271526 Jy ! Component: 800 - total flux cleaned = 0.0279835 Jy ! Component: 850 - total flux cleaned = 0.0286716 Jy ! Component: 900 - total flux cleaned = 0.0293475 Jy ! Component: 950 - total flux cleaned = 0.0301314 Jy ! Component: 1000 - total flux cleaned = 0.0307833 Jy ! Component: 1050 - total flux cleaned = 0.0314846 Jy ! Component: 1100 - total flux cleaned = 0.0321182 Jy ! Component: 1150 - total flux cleaned = 0.0328539 Jy ! Component: 1200 - total flux cleaned = 0.0334664 Jy ! Component: 1250 - total flux cleaned = 0.0339609 Jy ! Component: 1300 - total flux cleaned = 0.0345034 Jy ! Component: 1350 - total flux cleaned = 0.0349845 Jy ! Component: 1400 - total flux cleaned = 0.0355654 Jy ! Component: 1450 - total flux cleaned = 0.0359811 Jy ! Component: 1500 - total flux cleaned = 0.0363409 Jy ! Component: 1550 - total flux cleaned = 0.036798 Jy ! Component: 1600 - total flux cleaned = 0.0372488 Jy ! Component: 1650 - total flux cleaned = 0.0375956 Jy ! Component: 1700 - total flux cleaned = 0.0381344 Jy ! Component: 1750 - total flux cleaned = 0.0386195 Jy ! Component: 1800 - total flux cleaned = 0.0392921 Jy ! Component: 1850 - total flux cleaned = 0.0398617 Jy ! Component: 1900 - total flux cleaned = 0.0403317 Jy ! Component: 1950 - total flux cleaned = 0.0409376 Jy ! Component: 2000 - total flux cleaned = 0.0415377 Jy ! Total flux subtracted in 2048 components = 0.0419491 Jy ! Clean residual min=-0.003029 max=0.002543 Jy/beam ! Clean residual mean=0.000261 rms=0.000915 Jy/beam ! Combined flux in latest and established models = 0.23208 Jy keep ! Adding 101 model components to the UV plane model. ! The established model now contains 182 components and 0.23208 Jy ![Exited script file: muppet] wmap "J0743-3803_S_2002_05_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.121 x 11.55 at 14.49 degrees (North through East) ! Clean map min=-0.0065785 max=0.083229 Jy/beam ! Writing clean map to FITS file: J0743-3803_S_2002_05_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0832293 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000903204 device "J0743-3803_S_2002_05_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J0743-3803_S_2002_05_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -3.2556 3.2556 6.5112 13.0224 26.0448 52.0896 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0027 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.083 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.121 x 11.55 at 14.49 degrees (North through East) ! Clean map min=-0.0065785 max=0.083229 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0743-3803_S_2002_05_14_yyk\_map.gif/gif" ! Attempting to open device: 'J0743-3803_S_2002_05_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0743-3803_S_2002_05_14_yyk_uvs.log closed on Tue Jun 26 22:27:50 2007