! Started logfile: J0742-3829_X_2002_05_14_yyk_uvs.log on Tue Jun 26 22:27:34 2007 obs J0742-3829_X_2002_05_14_yyk_uva.fits ! Reading UV FITS file: J0742-3829_X_2002_05_14_yyk_uva.fits ! AN table 1: 39 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.767521 visibilities/baseline/integration-bin. ! Found source: J0742-3829 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40947e+09 8e+06 1 8e+06 ! 02 2 8.47947e+09 8e+06 1 8e+06 ! 03 3 8.79447e+09 8e+06 1 8e+06 ! 04 4 8.89947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1076 lines of history. ! ! Reading 5388 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0742-3829_X_2002_05_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.375216 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6712 mas, bmaj=1.777 mas, bpa=11.24 degrees ! Estimated noise=3954.59 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0153697 Jy ! Component: 100 - total flux cleaned = -0.0170398 Jy ! Total flux subtracted in 100 components = -0.0170398 Jy ! Clean residual min=-0.018515 max=0.018584 Jy/beam ! Clean residual mean=0.000051 rms=0.007409 Jy/beam ! Combined flux in latest and established models = -0.0170398 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 40 model components to the UV plane model. ! The established model now contains 40 components and -0.0170398 Jy ! ! Correcting IF 1. ! A total of 390 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 86 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 86 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.371044Jy sigma=0.002320 ! Fit after self-cal, rms=0.370704Jy sigma=0.002317 ! Inverting map and beam ! Estimated beam: bmin=0.6712 mas, bmaj=1.777 mas, bpa=11.24 degrees ! Estimated noise=3954.59 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8712 mas, bmaj=2.317 mas, bpa=12.81 degrees ! Estimated noise=1923.83 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0307656 Jy ! Component: 100 - total flux cleaned = 0.0384887 Jy ! Component: 150 - total flux cleaned = 0.0357703 Jy ! Component: 200 - total flux cleaned = 0.0320697 Jy ! Total flux subtracted in 200 components = 0.0320697 Jy ! Clean residual min=-0.007342 max=0.007371 Jy/beam ! Clean residual mean=-0.000008 rms=0.002848 Jy/beam ! Combined flux in latest and established models = 0.0150299 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 56 model components to the UV plane model. ! The established model now contains 94 components and 0.0150299 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.367922Jy sigma=0.002299 ! Fit after self-cal, rms=0.367879Jy sigma=0.002299 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8712 x 2.317 at 12.81 degrees (North through East) ! Clean map min=-0.015941 max=0.026949 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* NL 0.00* OV 0.00* PT 0.00* ! SC 0.00* MK 0.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Fit before self-cal, rms=0.367879Jy sigma=0.002299 ! Fit after self-cal, rms=0.367879Jy sigma=0.002299 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.367879Jy sigma=0.002299 ! Fit after self-cal, rms=0.367879Jy sigma=0.002299 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8712 mas, bmaj=2.317 mas, bpa=12.81 degrees ! Estimated noise=1923.83 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000733726 Jy ! Component: 100 - total flux cleaned = -0.00235603 Jy ! Component: 150 - total flux cleaned = -0.00422309 Jy ! Component: 200 - total flux cleaned = -0.0063177 Jy ! Total flux subtracted in 200 components = -0.0063177 Jy ! Clean residual min=-0.005167 max=0.005156 Jy/beam ! Clean residual mean=-0.000016 rms=0.002112 Jy/beam ! Combined flux in latest and established models = 0.00871224 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 55 model components to the UV plane model. ! The established model now contains 129 components and 0.00871224 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.367065Jy sigma=0.002294 ! Fit after self-cal, rms=0.367051Jy sigma=0.002294 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.367051Jy sigma=0.002294 ! Fit after self-cal, rms=0.365398Jy sigma=0.002283 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000670267 Jy ! Component: 100 - total flux cleaned = 0.00211185 Jy ! Component: 150 - total flux cleaned = 0.00147491 Jy ! Component: 200 - total flux cleaned = 0.000973907 Jy ! Total flux subtracted in 200 components = 0.000973907 Jy ! Clean residual min=-0.006709 max=0.006714 Jy/beam ! Clean residual mean=-0.000017 rms=0.002702 Jy/beam ! Combined flux in latest and established models = 0.00968615 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 50 model components to the UV plane model. ! The established model now contains 176 components and 0.00968615 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.363856Jy sigma=0.002273 ! Fit after self-cal, rms=0.363150Jy sigma=0.002268 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8712 x 2.317 at 12.81 degrees (North through East) ! Clean map min=-0.014509 max=0.026328 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.753 mas, bmaj=11.17 mas, bpa=14.09 degrees ! Estimated noise=2408.74 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000256469 Jy ! Component: 100 - total flux cleaned = -0.00124008 Jy ! Component: 150 - total flux cleaned = -0.00125102 Jy ! Component: 200 - total flux cleaned = -0.00181556 Jy ! Total flux subtracted in 200 components = -0.00181556 Jy ! Clean residual min=-0.003471 max=0.003682 Jy/beam ! Clean residual mean=-0.000073 rms=0.001324 Jy/beam ! Combined flux in latest and established models = 0.00787059 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 203 components and 0.00787059 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.362893Jy sigma=0.002266 ! Fit after self-cal, rms=0.362627Jy sigma=0.002265 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6712 mas, bmaj=1.777 mas, bpa=11.24 degrees ! Estimated noise=3954.59 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00716978 Jy ! Component: 100 - total flux cleaned = -0.0250265 Jy ! Component: 150 - total flux cleaned = -0.0271694 Jy ! Component: 200 - total flux cleaned = -0.0288675 Jy ! Total flux subtracted in 200 components = -0.0288675 Jy ! Clean residual min=-0.018722 max=0.018934 Jy/beam ! Clean residual mean=0.000036 rms=0.008184 Jy/beam ! Combined flux in latest and established models = -0.0288675 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 68 model components to the UV plane model. ! The established model now contains 68 components and -0.0288675 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8712 mas, bmaj=2.317 mas, bpa=12.81 degrees ! Estimated noise=1923.83 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00931214 Jy ! Component: 100 - total flux cleaned = 0.00873556 Jy ! Component: 150 - total flux cleaned = 0.00826469 Jy ! Component: 200 - total flux cleaned = 0.0075536 Jy ! Total flux subtracted in 200 components = 0.0075536 Jy ! Clean residual min=-0.018642 max=0.016689 Jy/beam ! Clean residual mean=-0.000050 rms=0.004692 Jy/beam ! Combined flux in latest and established models = -0.0213139 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 87 components and -0.0213139 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.753 mas, bmaj=11.17 mas, bpa=14.09 degrees ! Estimated noise=2408.74 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00265691 Jy ! Component: 100 - total flux cleaned = 0.00297215 Jy ! Component: 150 - total flux cleaned = 0.00324683 Jy ! Component: 200 - total flux cleaned = 0.00356039 Jy ! Total flux subtracted in 200 components = 0.00356039 Jy ! Clean residual min=-0.012091 max=0.013046 Jy/beam ! Clean residual mean=-0.000096 rms=0.004169 Jy/beam ! Combined flux in latest and established models = -0.0177535 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 95 components and -0.0177535 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8712 mas, bmaj=2.317 mas, bpa=12.81 degrees ! Estimated noise=1923.83 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00315168 Jy ! Component: 100 - total flux cleaned = -0.00364016 Jy ! Component: 150 - total flux cleaned = -0.00365208 Jy ! Component: 200 - total flux cleaned = -0.00365475 Jy ! Total flux subtracted in 200 components = -0.00365475 Jy ! Clean residual min=-0.018526 max=0.016859 Jy/beam ! Clean residual mean=-0.000049 rms=0.004565 Jy/beam ! Combined flux in latest and established models = -0.0214082 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 110 components and -0.0214082 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.364035Jy sigma=0.002273 ! Fit after self-cal, rms=0.363448Jy sigma=0.002271 wmodel J0742-3829_X_2002_05_14_yyk\_map.mod ! Writing 110 model components to file: J0742-3829_X_2002_05_14_yyk_map.mod wobs J0742-3829_X_2002_05_14_yyk\_uvs.fits ! Writing UV FITS file: J0742-3829_X_2002_05_14_yyk_uvs.fits wwins J0742-3829_X_2002_05_14_yyk\_map.win ! wwins: Wrote 1 windows to J0742-3829_X_2002_05_14_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000944613 Jy ! Component: 100 - total flux cleaned = 0.00120345 Jy ! Component: 150 - total flux cleaned = 0.000551549 Jy ! Component: 200 - total flux cleaned = 0.000345611 Jy ! Component: 250 - total flux cleaned = 0.000149279 Jy ! Component: 300 - total flux cleaned = -0.000599952 Jy ! Component: 350 - total flux cleaned = -0.00149892 Jy ! Component: 400 - total flux cleaned = -0.00201486 Jy ! Component: 450 - total flux cleaned = -0.00218202 Jy ! Component: 500 - total flux cleaned = -0.00234302 Jy ! Component: 550 - total flux cleaned = -0.0025006 Jy ! Component: 600 - total flux cleaned = -0.00295751 Jy ! Component: 650 - total flux cleaned = -0.0028077 Jy ! Component: 700 - total flux cleaned = -0.00252612 Jy ! Component: 750 - total flux cleaned = -0.00266733 Jy ! Component: 800 - total flux cleaned = -0.00253028 Jy ! Component: 850 - total flux cleaned = -0.00253475 Jy ! Component: 900 - total flux cleaned = -0.00266635 Jy ! Component: 950 - total flux cleaned = -0.00240897 Jy ! Component: 1000 - total flux cleaned = -0.00253945 Jy ! Component: 1050 - total flux cleaned = -0.00278877 Jy ! Component: 1100 - total flux cleaned = -0.00291319 Jy ! Component: 1150 - total flux cleaned = -0.00327228 Jy ! Component: 1200 - total flux cleaned = -0.00350651 Jy ! Component: 1250 - total flux cleaned = -0.00407909 Jy ! Component: 1300 - total flux cleaned = -0.00407901 Jy ! Component: 1350 - total flux cleaned = -0.0046363 Jy ! Component: 1400 - total flux cleaned = -0.00496663 Jy ! Component: 1450 - total flux cleaned = -0.00550873 Jy ! Component: 1500 - total flux cleaned = -0.00583085 Jy ! Component: 1550 - total flux cleaned = -0.00614915 Jy ! Component: 1600 - total flux cleaned = -0.0062548 Jy ! Component: 1650 - total flux cleaned = -0.00635998 Jy ! Component: 1700 - total flux cleaned = -0.00635907 Jy ! Component: 1750 - total flux cleaned = -0.00635887 Jy ! Component: 1800 - total flux cleaned = -0.00615283 Jy ! Component: 1850 - total flux cleaned = -0.00625538 Jy ! Component: 1900 - total flux cleaned = -0.00605054 Jy ! Component: 1950 - total flux cleaned = -0.00584616 Jy ! Component: 2000 - total flux cleaned = -0.0059488 Jy ! Total flux subtracted in 2048 components = -0.0057437 Jy ! Clean residual min=-0.005856 max=0.006189 Jy/beam ! Clean residual mean=-0.000036 rms=0.002030 Jy/beam ! Combined flux in latest and established models = -0.0271519 Jy keep ! Adding 118 model components to the UV plane model. ! The established model now contains 228 components and -0.0271519 Jy ![Exited script file: muppet] wmap "J0742-3829_X_2002_05_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8712 x 2.317 at 12.81 degrees (North through East) ! Clean map min=-0.015589 max=0.017487 Jy/beam ! Writing clean map to FITS file: J0742-3829_X_2002_05_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.017487 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00184661 device "J0742-3829_X_2002_05_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J0742-3829_X_2002_05_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -31.6798 31.6798 63.3596 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0055 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.017 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8712 x 2.317 at 12.81 degrees (North through East) ! Clean map min=-0.015589 max=0.017487 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0742-3829_X_2002_05_14_yyk\_map.gif/gif" ! Attempting to open device: 'J0742-3829_X_2002_05_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0742-3829_X_2002_05_14_yyk_uvs.log closed on Tue Jun 26 22:27:40 2007