! Started logfile: J0737-3954_X_2002_05_14_yyk_uvs.log on Tue Jun 26 22:27:09 2007 obs J0737-3954_X_2002_05_14_yyk_uva.fits ! Reading UV FITS file: J0737-3954_X_2002_05_14_yyk_uva.fits ! AN table 1: 35 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.56 visibilities/baseline/integration-bin. ! Found source: J0737-3954 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40947e+09 8e+06 1 8e+06 ! 02 2 8.47947e+09 8e+06 1 8e+06 ! 03 3 8.79447e+09 8e+06 1 8e+06 ! 04 4 8.89947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1076 lines of history. ! ! Reading 3528 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0737-3954_X_2002_05_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.368481 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8326 mas, bmaj=5.264 mas, bpa=14.56 degrees ! Estimated noise=2759.67 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, -0.2). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.156527 Jy ! Component: 100 - total flux cleaned = 0.218328 Jy ! Total flux subtracted in 100 components = 0.218328 Jy ! Clean residual min=-0.017052 max=0.020821 Jy/beam ! Clean residual mean=0.000053 rms=0.005978 Jy/beam ! Combined flux in latest and established models = 0.218328 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 46 model components to the UV plane model. ! The established model now contains 46 components and 0.218328 Jy ! ! Correcting IF 1. ! A total of 84 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 84 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 84 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 84 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.317643Jy sigma=0.001463 ! Fit after self-cal, rms=0.316959Jy sigma=0.001460 ! Inverting map and beam ! Estimated beam: bmin=0.8326 mas, bmaj=5.264 mas, bpa=14.56 degrees ! Estimated noise=2759.67 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9723 mas, bmaj=6.054 mas, bpa=14.77 degrees ! Estimated noise=1977.98 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0499241 Jy ! Component: 100 - total flux cleaned = 0.0727326 Jy ! Component: 150 - total flux cleaned = 0.0840565 Jy ! Component: 200 - total flux cleaned = 0.0898455 Jy ! Total flux subtracted in 200 components = 0.0898455 Jy ! Clean residual min=-0.016123 max=0.013981 Jy/beam ! Clean residual mean=0.000381 rms=0.004272 Jy/beam ! Combined flux in latest and established models = 0.308173 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 76 model components to the UV plane model. ! The established model now contains 121 components and 0.308173 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.313051Jy sigma=0.001419 ! Fit after self-cal, rms=0.312815Jy sigma=0.001418 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9723 x 6.054 at 14.77 degrees (North through East) ! Clean map min=-0.015039 max=0.09467 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Fit before self-cal, rms=0.312815Jy sigma=0.001418 ! Fit after self-cal, rms=0.312815Jy sigma=0.001418 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.312815Jy sigma=0.001418 ! Fit after self-cal, rms=0.312811Jy sigma=0.001418 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9723 mas, bmaj=6.054 mas, bpa=14.77 degrees ! Estimated noise=1977.98 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00356843 Jy ! Component: 100 - total flux cleaned = 0.00432233 Jy ! Component: 150 - total flux cleaned = 0.00453057 Jy ! Component: 200 - total flux cleaned = 0.00465514 Jy ! Total flux subtracted in 200 components = 0.00465514 Jy ! Clean residual min=-0.015587 max=0.013631 Jy/beam ! Clean residual mean=0.000401 rms=0.004192 Jy/beam ! Combined flux in latest and established models = 0.312828 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 128 components and 0.312828 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.312800Jy sigma=0.001418 ! Fit after self-cal, rms=0.312791Jy sigma=0.001418 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.312791Jy sigma=0.001418 ! Fit after self-cal, rms=0.309993Jy sigma=0.001398 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00341684 Jy ! Component: 100 - total flux cleaned = 0.00304247 Jy ! Component: 150 - total flux cleaned = 0.00281876 Jy ! Component: 200 - total flux cleaned = 0.00269316 Jy ! Total flux subtracted in 200 components = 0.00269316 Jy ! Clean residual min=-0.014632 max=0.013819 Jy/beam ! Clean residual mean=0.000390 rms=0.004187 Jy/beam ! Combined flux in latest and established models = 0.315521 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 138 components and 0.315521 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.309944Jy sigma=0.001397 ! Fit after self-cal, rms=0.309171Jy sigma=0.001394 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9723 x 6.054 at 14.77 degrees (North through East) ! Clean map min=-0.014588 max=0.10106 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.309171Jy sigma=0.001394 ! Fit after self-cal, rms=0.309171Jy sigma=0.001394 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.309171Jy sigma=0.001394 ! Fit after self-cal, rms=0.308862Jy sigma=0.001393 ! Inverting map and beam ! Estimated beam: bmin=0.9723 mas, bmaj=6.054 mas, bpa=14.77 degrees ! Estimated noise=1977.98 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000443543 Jy ! Component: 100 - total flux cleaned = 0.000197317 Jy ! Component: 150 - total flux cleaned = 6.55342e-05 Jy ! Component: 200 - total flux cleaned = 6.69086e-05 Jy ! Total flux subtracted in 200 components = 6.69086e-05 Jy ! Clean residual min=-0.015046 max=0.014161 Jy/beam ! Clean residual mean=0.000385 rms=0.004163 Jy/beam ! Combined flux in latest and established models = 0.315588 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 150 components and 0.315588 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.308840Jy sigma=0.001393 ! Fit after self-cal, rms=0.308667Jy sigma=0.001392 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.308667Jy sigma=0.001392 ! Fit after self-cal, rms=0.294167Jy sigma=0.001393 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.294167Jy sigma=0.001393 ! Fit after self-cal, rms=0.294090Jy sigma=0.001393 ! Inverting map and beam ! Estimated beam: bmin=0.9546 mas, bmaj=6.034 mas, bpa=14.76 degrees ! Estimated noise=1921.57 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00422742 Jy ! Component: 100 - total flux cleaned = -0.00494961 Jy ! Component: 150 - total flux cleaned = -0.00500511 Jy ! Component: 200 - total flux cleaned = -0.00505648 Jy ! Total flux subtracted in 200 components = -0.00505648 Jy ! Clean residual min=-0.012575 max=0.012370 Jy/beam ! Clean residual mean=0.000255 rms=0.003446 Jy/beam ! Combined flux in latest and established models = 0.310532 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 161 components and 0.310532 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.294026Jy sigma=0.001393 ! Fit after self-cal, rms=0.293964Jy sigma=0.001392 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.334 mas, bmaj=9.325 mas, bpa=2.98 degrees ! Estimated noise=2365.1 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00118955 Jy ! Component: 100 - total flux cleaned = 0.00131304 Jy ! Component: 150 - total flux cleaned = 0.00142283 Jy ! Component: 200 - total flux cleaned = 0.00147087 Jy ! Total flux subtracted in 200 components = 0.00147087 Jy ! Clean residual min=-0.015006 max=0.015439 Jy/beam ! Clean residual mean=0.000476 rms=0.005023 Jy/beam ! Combined flux in latest and established models = 0.312003 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 167 components and 0.312003 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.293979Jy sigma=0.001392 ! Fit after self-cal, rms=0.293943Jy sigma=0.001392 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8281 mas, bmaj=5.244 mas, bpa=14.54 degrees ! Estimated noise=2673.23 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.157979 Jy ! Component: 100 - total flux cleaned = 0.220994 Jy ! Component: 150 - total flux cleaned = 0.252336 Jy ! Component: 200 - total flux cleaned = 0.270943 Jy ! Total flux subtracted in 200 components = 0.270943 Jy ! Clean residual min=-0.013180 max=0.014230 Jy/beam ! Clean residual mean=0.000078 rms=0.004060 Jy/beam ! Combined flux in latest and established models = 0.270943 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 91 model components to the UV plane model. ! The established model now contains 91 components and 0.270943 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9546 mas, bmaj=6.034 mas, bpa=14.76 degrees ! Estimated noise=1921.57 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0206025 Jy ! Component: 100 - total flux cleaned = 0.0301559 Jy ! Component: 150 - total flux cleaned = 0.0347367 Jy ! Component: 200 - total flux cleaned = 0.035283 Jy ! Total flux subtracted in 200 components = 0.035283 Jy ! Clean residual min=-0.013535 max=0.012496 Jy/beam ! Clean residual mean=0.000238 rms=0.003555 Jy/beam ! Combined flux in latest and established models = 0.306226 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 134 components and 0.306226 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.334 mas, bmaj=9.325 mas, bpa=2.98 degrees ! Estimated noise=2365.1 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00337801 Jy ! Component: 100 - total flux cleaned = 0.0038982 Jy ! Component: 150 - total flux cleaned = 0.00411201 Jy ! Component: 200 - total flux cleaned = 0.00438241 Jy ! Total flux subtracted in 200 components = 0.00438241 Jy ! Clean residual min=-0.015553 max=0.015699 Jy/beam ! Clean residual mean=0.000462 rms=0.004998 Jy/beam ! Combined flux in latest and established models = 0.310608 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 136 components and 0.310608 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9546 mas, bmaj=6.034 mas, bpa=14.76 degrees ! Estimated noise=1921.57 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000773972 Jy ! Component: 100 - total flux cleaned = -0.00113329 Jy ! Component: 150 - total flux cleaned = -0.00135645 Jy ! Component: 200 - total flux cleaned = -0.00155203 Jy ! Total flux subtracted in 200 components = -0.00155203 Jy ! Clean residual min=-0.013052 max=0.011985 Jy/beam ! Clean residual mean=0.000244 rms=0.003454 Jy/beam ! Combined flux in latest and established models = 0.309056 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 150 components and 0.309056 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.294058Jy sigma=0.001393 ! Fit after self-cal, rms=0.294019Jy sigma=0.001392 wmodel J0737-3954_X_2002_05_14_yyk\_map.mod ! Writing 150 model components to file: J0737-3954_X_2002_05_14_yyk_map.mod wobs J0737-3954_X_2002_05_14_yyk\_uvs.fits ! Writing UV FITS file: J0737-3954_X_2002_05_14_yyk_uvs.fits wwins J0737-3954_X_2002_05_14_yyk\_map.win ! wwins: Wrote 1 windows to J0737-3954_X_2002_05_14_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00144066 Jy ! Component: 100 - total flux cleaned = -0.000113741 Jy ! Component: 150 - total flux cleaned = 0.0013837 Jy ! Component: 200 - total flux cleaned = 0.0024358 Jy ! Component: 250 - total flux cleaned = 0.0027111 Jy ! Component: 300 - total flux cleaned = 0.0025833 Jy ! Component: 350 - total flux cleaned = 0.00305471 Jy ! Component: 400 - total flux cleaned = 0.00372493 Jy ! Component: 450 - total flux cleaned = 0.00456676 Jy ! Component: 500 - total flux cleaned = 0.0049681 Jy ! Component: 550 - total flux cleaned = 0.00534696 Jy ! Component: 600 - total flux cleaned = 0.00516559 Jy ! Component: 650 - total flux cleaned = 0.00517007 Jy ! Component: 700 - total flux cleaned = 0.00508443 Jy ! Component: 750 - total flux cleaned = 0.00476008 Jy ! Component: 800 - total flux cleaned = 0.00467911 Jy ! Component: 850 - total flux cleaned = 0.00452672 Jy ! Component: 900 - total flux cleaned = 0.00474614 Jy ! Component: 950 - total flux cleaned = 0.00481746 Jy ! Component: 1000 - total flux cleaned = 0.00481773 Jy ! Component: 1050 - total flux cleaned = 0.00488634 Jy ! Component: 1100 - total flux cleaned = 0.00495168 Jy ! Component: 1150 - total flux cleaned = 0.00501408 Jy ! Component: 1200 - total flux cleaned = 0.00482792 Jy ! Component: 1250 - total flux cleaned = 0.00452594 Jy ! Component: 1300 - total flux cleaned = 0.00434868 Jy ! Component: 1350 - total flux cleaned = 0.00405783 Jy ! Component: 1400 - total flux cleaned = 0.00394401 Jy ! Component: 1450 - total flux cleaned = 0.00388701 Jy ! Component: 1500 - total flux cleaned = 0.00388576 Jy ! Component: 1550 - total flux cleaned = 0.00377651 Jy ! Component: 1600 - total flux cleaned = 0.00377612 Jy ! Component: 1650 - total flux cleaned = 0.0039326 Jy ! Component: 1700 - total flux cleaned = 0.00403461 Jy ! Component: 1750 - total flux cleaned = 0.00408501 Jy ! Component: 1800 - total flux cleaned = 0.00423553 Jy ! Component: 1850 - total flux cleaned = 0.0043345 Jy ! Component: 1900 - total flux cleaned = 0.0045309 Jy ! Component: 1950 - total flux cleaned = 0.0046763 Jy ! Component: 2000 - total flux cleaned = 0.00481996 Jy ! Total flux subtracted in 2048 components = 0.00491424 Jy ! Clean residual min=-0.002724 max=0.002595 Jy/beam ! Clean residual mean=0.000075 rms=0.000948 Jy/beam ! Combined flux in latest and established models = 0.313971 Jy keep ! Adding 132 model components to the UV plane model. ! The established model now contains 282 components and 0.313971 Jy ![Exited script file: muppet] wmap "J0737-3954_X_2002_05_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9546 x 6.034 at 14.76 degrees (North through East) ! Clean map min=-0.0079029 max=0.089768 Jy/beam ! Writing clean map to FITS file: J0737-3954_X_2002_05_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.089768 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000910126 device "J0737-3954_X_2002_05_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J0737-3954_X_2002_05_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -3.04159 3.04159 6.08318 12.1664 24.3327 48.6655 97.3309 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0027 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.089 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9546 x 6.034 at 14.76 degrees (North through East) ! Clean map min=-0.0079029 max=0.089768 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0737-3954_X_2002_05_14_yyk\_map.gif/gif" ! Attempting to open device: 'J0737-3954_X_2002_05_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0737-3954_X_2002_05_14_yyk_uvs.log closed on Tue Jun 26 22:27:15 2007