! Started logfile: J0730-3208_X_2002_01_31_yyk_uvs.log on Wed Jun 27 10:51:18 2007 obs J0730-3208_X_2002_01_31_yyk_uva.fits ! Reading UV FITS file: J0730-3208_X_2002_01_31_yyk_uva.fits ! AN table 1: 77 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.723521 visibilities/baseline/integration-bin. ! Found source: J0730-3208 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40947e+09 8e+06 1 8e+06 ! 02 2 8.47947e+09 8e+06 1 8e+06 ! 03 3 8.79447e+09 8e+06 1 8e+06 ! 04 4 8.89947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1544 lines of history. ! ! Reading 10028 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 flag NL ! Flagging baselines of antenna 1:NL in the currently selected channels. ![@muppet J0730-3208_X_2002_01_31_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.21153 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6443 mas, bmaj=1.643 mas, bpa=6.18 degrees ! Estimated noise=1392.89 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0844347 Jy ! Component: 100 - total flux cleaned = 0.121903 Jy ! Total flux subtracted in 100 components = 0.121903 Jy ! Clean residual min=-0.011036 max=0.014327 Jy/beam ! Clean residual mean=-0.000018 rms=0.003336 Jy/beam ! Combined flux in latest and established models = 0.121903 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.121903 Jy ! ! Correcting IF 1. ! A total of 192 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 192 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 192 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 192 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.172865Jy sigma=0.001392 ! Fit after self-cal, rms=0.172665Jy sigma=0.001390 ! Inverting map and beam ! Estimated beam: bmin=0.6443 mas, bmaj=1.643 mas, bpa=6.18 degrees ! Estimated noise=1392.89 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9019 mas, bmaj=2.22 mas, bpa=2.656 degrees ! Estimated noise=930.655 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0304876 Jy ! Component: 100 - total flux cleaned = 0.0395305 Jy ! Component: 150 - total flux cleaned = 0.0423771 Jy ! Component: 200 - total flux cleaned = 0.0430692 Jy ! Total flux subtracted in 200 components = 0.0430692 Jy ! Clean residual min=-0.006884 max=0.008171 Jy/beam ! Clean residual mean=0.000043 rms=0.002061 Jy/beam ! Combined flux in latest and established models = 0.164972 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 54 components and 0.164972 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169557Jy sigma=0.001359 ! Fit after self-cal, rms=0.169552Jy sigma=0.001359 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9019 x 2.22 at 2.656 degrees (North through East) ! Clean map min=-0.0066051 max=0.10705 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.169552Jy sigma=0.001359 ! Fit after self-cal, rms=0.169479Jy sigma=0.001359 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169479Jy sigma=0.001359 ! Fit after self-cal, rms=0.169477Jy sigma=0.001359 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9026 mas, bmaj=2.22 mas, bpa=2.603 degrees ! Estimated noise=931.194 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000182112 Jy ! Component: 100 - total flux cleaned = 0.000206254 Jy ! Component: 150 - total flux cleaned = 0.000230012 Jy ! Component: 200 - total flux cleaned = 0.000253671 Jy ! Total flux subtracted in 200 components = 0.000253671 Jy ! Clean residual min=-0.006969 max=0.008073 Jy/beam ! Clean residual mean=0.000044 rms=0.002069 Jy/beam ! Combined flux in latest and established models = 0.165226 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 54 components and 0.165226 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169468Jy sigma=0.001359 ! Fit after self-cal, rms=0.169468Jy sigma=0.001359 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169468Jy sigma=0.001359 ! Fit after self-cal, rms=0.168497Jy sigma=0.001350 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110784 Jy ! Component: 100 - total flux cleaned = 0.00113085 Jy ! Component: 150 - total flux cleaned = 0.00112948 Jy ! Component: 200 - total flux cleaned = 0.00103902 Jy ! Total flux subtracted in 200 components = 0.00103902 Jy ! Clean residual min=-0.006717 max=0.008635 Jy/beam ! Clean residual mean=0.000043 rms=0.002079 Jy/beam ! Combined flux in latest and established models = 0.166265 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 55 components and 0.166265 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168419Jy sigma=0.001349 ! Fit after self-cal, rms=0.168260Jy sigma=0.001348 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9026 x 2.22 at 2.603 degrees (North through East) ! Clean map min=-0.0063589 max=0.1097 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168260Jy sigma=0.001348 ! Fit after self-cal, rms=0.170129Jy sigma=0.001348 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170129Jy sigma=0.001348 ! Fit after self-cal, rms=0.170077Jy sigma=0.001347 ! Inverting map and beam ! Estimated beam: bmin=0.905 mas, bmaj=2.219 mas, bpa=2.497 degrees ! Estimated noise=935.651 mJy/beam. ! Added new window around map position (4.2, 4.6). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00843513 Jy ! Component: 100 - total flux cleaned = 0.00960945 Jy ! Component: 150 - total flux cleaned = 0.0103187 Jy ! Component: 200 - total flux cleaned = 0.0105227 Jy ! Total flux subtracted in 200 components = 0.0105227 Jy ! Clean residual min=-0.006875 max=0.006810 Jy/beam ! Clean residual mean=0.000030 rms=0.001871 Jy/beam ! Combined flux in latest and established models = 0.176788 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 73 components and 0.176788 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169713Jy sigma=0.001344 ! Fit after self-cal, rms=0.169645Jy sigma=0.001344 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169645Jy sigma=0.001344 ! Fit after self-cal, rms=0.168111Jy sigma=0.001343 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168111Jy sigma=0.001343 ! Fit after self-cal, rms=0.168116Jy sigma=0.001343 ! Inverting map and beam ! Estimated beam: bmin=0.8976 mas, bmaj=2.22 mas, bpa=3.021 degrees ! Estimated noise=928.548 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00119245 Jy ! Component: 100 - total flux cleaned = 0.000862457 Jy ! Component: 150 - total flux cleaned = 0.000562179 Jy ! Component: 200 - total flux cleaned = 0.000377179 Jy ! Total flux subtracted in 200 components = 0.000377179 Jy ! Clean residual min=-0.006156 max=0.005910 Jy/beam ! Clean residual mean=0.000025 rms=0.001639 Jy/beam ! Combined flux in latest and established models = 0.177165 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 79 components and 0.177165 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167991Jy sigma=0.001342 ! Fit after self-cal, rms=0.167987Jy sigma=0.001342 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.032 mas, bmaj=8.677 mas, bpa=12.11 degrees ! Estimated noise=1157.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -2.788e-05 Jy ! Component: 100 - total flux cleaned = -0.000248755 Jy ! Component: 150 - total flux cleaned = -0.000440199 Jy ! Component: 200 - total flux cleaned = -0.000604897 Jy ! Total flux subtracted in 200 components = -0.000604897 Jy ! Clean residual min=-0.006381 max=0.005576 Jy/beam ! Clean residual mean=0.000043 rms=0.001988 Jy/beam ! Combined flux in latest and established models = 0.17656 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 88 components and 0.17656 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167967Jy sigma=0.001342 ! Fit after self-cal, rms=0.167967Jy sigma=0.001342 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.644 mas, bmaj=1.644 mas, bpa=6.326 degrees ! Estimated noise=1388.3 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0873679 Jy ! Component: 100 - total flux cleaned = 0.124011 Jy ! Component: 150 - total flux cleaned = 0.142108 Jy ! Component: 200 - total flux cleaned = 0.149429 Jy ! Total flux subtracted in 200 components = 0.149429 Jy ! Clean residual min=-0.012042 max=0.009668 Jy/beam ! Clean residual mean=-0.000009 rms=0.002778 Jy/beam ! Combined flux in latest and established models = 0.149429 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 41 model components to the UV plane model. ! The established model now contains 41 components and 0.149429 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8976 mas, bmaj=2.22 mas, bpa=3.021 degrees ! Estimated noise=928.548 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.6, 0.8). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0155865 Jy ! Component: 100 - total flux cleaned = 0.02289 Jy ! Component: 150 - total flux cleaned = 0.0261574 Jy ! Component: 200 - total flux cleaned = 0.0265598 Jy ! Total flux subtracted in 200 components = 0.0265598 Jy ! Clean residual min=-0.005780 max=0.006883 Jy/beam ! Clean residual mean=0.000017 rms=0.001622 Jy/beam ! Combined flux in latest and established models = 0.175989 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 67 components and 0.175989 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.032 mas, bmaj=8.677 mas, bpa=12.11 degrees ! Estimated noise=1157.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -9.18014e-05 Jy ! Component: 100 - total flux cleaned = 3.67912e-06 Jy ! Component: 150 - total flux cleaned = 7.5771e-05 Jy ! Component: 200 - total flux cleaned = 7.93655e-05 Jy ! Total flux subtracted in 200 components = 7.93655e-05 Jy ! Clean residual min=-0.005856 max=0.005660 Jy/beam ! Clean residual mean=0.000034 rms=0.001905 Jy/beam ! Combined flux in latest and established models = 0.176068 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 90 components and 0.176068 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8976 mas, bmaj=2.22 mas, bpa=3.021 degrees ! Estimated noise=928.548 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000232493 Jy ! Component: 100 - total flux cleaned = -0.000133288 Jy ! Component: 150 - total flux cleaned = -5.65824e-05 Jy ! Component: 200 - total flux cleaned = -0.000133437 Jy ! Total flux subtracted in 200 components = -0.000133437 Jy ! Clean residual min=-0.006062 max=0.006187 Jy/beam ! Clean residual mean=0.000019 rms=0.001555 Jy/beam ! Combined flux in latest and established models = 0.175935 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 102 components and 0.175935 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167714Jy sigma=0.001340 ! Fit after self-cal, rms=0.167690Jy sigma=0.001340 wmodel J0730-3208_X_2002_01_31_yyk\_map.mod ! Writing 102 model components to file: J0730-3208_X_2002_01_31_yyk_map.mod wobs J0730-3208_X_2002_01_31_yyk\_uvs.fits ! Applying 77 buffered edits. ! Writing UV FITS file: J0730-3208_X_2002_01_31_yyk_uvs.fits wwins J0730-3208_X_2002_01_31_yyk\_map.win ! wwins: Wrote 3 windows to J0730-3208_X_2002_01_31_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000641758 Jy ! Component: 100 - total flux cleaned = -0.000276295 Jy ! Component: 150 - total flux cleaned = 0.00104558 Jy ! Component: 200 - total flux cleaned = 0.00213463 Jy ! Component: 250 - total flux cleaned = 0.00293371 Jy ! Component: 300 - total flux cleaned = 0.00384929 Jy ! Component: 350 - total flux cleaned = 0.0045138 Jy ! Component: 400 - total flux cleaned = 0.00515723 Jy ! Component: 450 - total flux cleaned = 0.00577939 Jy ! Component: 500 - total flux cleaned = 0.00631665 Jy ! Component: 550 - total flux cleaned = 0.00677321 Jy ! Component: 600 - total flux cleaned = 0.00740867 Jy ! Component: 650 - total flux cleaned = 0.00778161 Jy ! Component: 700 - total flux cleaned = 0.00838848 Jy ! Component: 750 - total flux cleaned = 0.00880453 Jy ! Component: 800 - total flux cleaned = 0.009269 Jy ! Component: 850 - total flux cleaned = 0.00955315 Jy ! Component: 900 - total flux cleaned = 0.00977682 Jy ! Component: 950 - total flux cleaned = 0.0101591 Jy ! Component: 1000 - total flux cleaned = 0.0104249 Jy ! Component: 1050 - total flux cleaned = 0.0105292 Jy ! Component: 1100 - total flux cleaned = 0.0106839 Jy ! Component: 1150 - total flux cleaned = 0.0107848 Jy ! Component: 1200 - total flux cleaned = 0.0110335 Jy ! Component: 1250 - total flux cleaned = 0.0111305 Jy ! Component: 1300 - total flux cleaned = 0.0113223 Jy ! Component: 1350 - total flux cleaned = 0.01137 Jy ! Component: 1400 - total flux cleaned = 0.0115088 Jy ! Component: 1450 - total flux cleaned = 0.0115096 Jy ! Component: 1500 - total flux cleaned = 0.0116004 Jy ! Component: 1550 - total flux cleaned = 0.0119094 Jy ! Component: 1600 - total flux cleaned = 0.0120391 Jy ! Component: 1650 - total flux cleaned = 0.0122109 Jy ! Component: 1700 - total flux cleaned = 0.0123796 Jy ! Component: 1750 - total flux cleaned = 0.0125457 Jy ! Component: 1800 - total flux cleaned = 0.012669 Jy ! Component: 1850 - total flux cleaned = 0.012588 Jy ! Component: 1900 - total flux cleaned = 0.0126281 Jy ! Component: 1950 - total flux cleaned = 0.0127466 Jy ! Component: 2000 - total flux cleaned = 0.0126685 Jy ! Total flux subtracted in 2048 components = 0.012708 Jy ! Clean residual min=-0.002139 max=0.003247 Jy/beam ! Clean residual mean=-0.000009 rms=0.000705 Jy/beam ! Combined flux in latest and established models = 0.188643 Jy keep ! Adding 119 model components to the UV plane model. ! The established model now contains 221 components and 0.188643 Jy ![Exited script file: muppet] wmap "J0730-3208_X_2002_01_31_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8976 x 2.22 at 3.021 degrees (North through East) ! Clean map min=-0.0036301 max=0.10266 Jy/beam ! Writing clean map to FITS file: J0730-3208_X_2002_01_31_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.102657 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000713649 device "J0730-3208_X_2002_01_31_yyk\_map.eps/VPS" ! Attempting to open device: 'J0730-3208_X_2002_01_31_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.08553 2.08553 4.17106 8.34211 16.6842 33.3685 66.7369 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0021 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.102 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8976 x 2.22 at 3.021 degrees (North through East) ! Clean map min=-0.0036301 max=0.10266 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0730-3208_X_2002_01_31_yyk\_map.gif/gif" ! Attempting to open device: 'J0730-3208_X_2002_01_31_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0730-3208_X_2002_01_31_yyk_uvs.log closed on Wed Jun 27 10:51:25 2007