! Started logfile: J0710-3850_X_2002_05_14_yyk_uvs.log on Tue Jun 26 22:25:18 2007 obs J0710-3850_X_2002_05_14_yyk_uva.fits ! Reading UV FITS file: J0710-3850_X_2002_05_14_yyk_uva.fits ! AN table 1: 38 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.594737 visibilities/baseline/integration-bin. ! Found source: J0710-3850 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40947e+09 8e+06 1 8e+06 ! 02 2 8.47947e+09 8e+06 1 8e+06 ! 03 3 8.79447e+09 8e+06 1 8e+06 ! 04 4 8.89947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1076 lines of history. ! ! Reading 4068 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0710-3850_X_2002_05_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.268597 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8172 mas, bmaj=7.345 mas, bpa=21.66 degrees ! Estimated noise=2081.36 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.127802 Jy ! Component: 100 - total flux cleaned = 0.168283 Jy ! Total flux subtracted in 100 components = 0.168283 Jy ! Clean residual min=-0.024645 max=0.036485 Jy/beam ! Clean residual mean=0.000285 rms=0.007838 Jy/beam ! Combined flux in latest and established models = 0.168283 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.168283 Jy ! ! Correcting IF 1. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 124 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.220735Jy sigma=0.001355 ! Fit after self-cal, rms=0.220160Jy sigma=0.001352 ! Inverting map and beam ! Estimated beam: bmin=0.8172 mas, bmaj=7.345 mas, bpa=21.66 degrees ! Estimated noise=2081.66 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.05 mas, bmaj=7.613 mas, bpa=20.91 degrees ! Estimated noise=1726.82 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0377832 Jy ! Component: 100 - total flux cleaned = 0.0558592 Jy ! Component: 150 - total flux cleaned = 0.0664627 Jy ! Component: 200 - total flux cleaned = 0.0732713 Jy ! Total flux subtracted in 200 components = 0.0732713 Jy ! Clean residual min=-0.022060 max=0.020449 Jy/beam ! Clean residual mean=0.000648 rms=0.006427 Jy/beam ! Combined flux in latest and established models = 0.241554 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 40 model components to the UV plane model. ! The established model now contains 55 components and 0.241554 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.217293Jy sigma=0.001319 ! Fit after self-cal, rms=0.217277Jy sigma=0.001319 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.05 x 7.613 at 20.91 degrees (North through East) ! Clean map min=-0.021517 max=0.075855 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Fit before self-cal, rms=0.217277Jy sigma=0.001319 ! Fit after self-cal, rms=0.217277Jy sigma=0.001319 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.217277Jy sigma=0.001319 ! Fit after self-cal, rms=0.217276Jy sigma=0.001319 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.05 mas, bmaj=7.613 mas, bpa=20.91 degrees ! Estimated noise=1726.82 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00477213 Jy ! Component: 100 - total flux cleaned = 0.0061428 Jy ! Component: 150 - total flux cleaned = 0.00664236 Jy ! Component: 200 - total flux cleaned = 0.00712286 Jy ! Total flux subtracted in 200 components = 0.00712286 Jy ! Clean residual min=-0.021832 max=0.019062 Jy/beam ! Clean residual mean=0.000693 rms=0.006380 Jy/beam ! Combined flux in latest and established models = 0.248677 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 68 components and 0.248677 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.217129Jy sigma=0.001318 ! Fit after self-cal, rms=0.217131Jy sigma=0.001318 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.217131Jy sigma=0.001318 ! Fit after self-cal, rms=0.213303Jy sigma=0.001291 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00602879 Jy ! Component: 100 - total flux cleaned = 0.00699346 Jy ! Component: 150 - total flux cleaned = 0.00732646 Jy ! Component: 200 - total flux cleaned = 0.00752933 Jy ! Total flux subtracted in 200 components = 0.00752933 Jy ! Clean residual min=-0.021428 max=0.018318 Jy/beam ! Clean residual mean=0.000699 rms=0.006296 Jy/beam ! Combined flux in latest and established models = 0.256206 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 88 components and 0.256206 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.213216Jy sigma=0.001290 ! Fit after self-cal, rms=0.212706Jy sigma=0.001286 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.05 x 7.613 at 20.91 degrees (North through East) ! Clean map min=-0.021098 max=0.073256 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.758 mas, bmaj=13.13 mas, bpa=6.189 degrees ! Estimated noise=1995.65 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00123583 Jy ! Component: 100 - total flux cleaned = 0.00147803 Jy ! Component: 150 - total flux cleaned = 0.00171262 Jy ! Component: 200 - total flux cleaned = 0.00182761 Jy ! Total flux subtracted in 200 components = 0.00182761 Jy ! Clean residual min=-0.027487 max=0.023607 Jy/beam ! Clean residual mean=0.001071 rms=0.008534 Jy/beam ! Combined flux in latest and established models = 0.258034 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 99 components and 0.258034 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.212633Jy sigma=0.001286 ! Fit after self-cal, rms=0.212502Jy sigma=0.001285 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8172 mas, bmaj=7.345 mas, bpa=21.66 degrees ! Estimated noise=2081.66 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.133876 Jy ! Component: 100 - total flux cleaned = 0.175191 Jy ! Component: 150 - total flux cleaned = 0.199189 Jy ! Component: 200 - total flux cleaned = 0.215025 Jy ! Total flux subtracted in 200 components = 0.215025 Jy ! Clean residual min=-0.021155 max=0.026765 Jy/beam ! Clean residual mean=0.000408 rms=0.006605 Jy/beam ! Combined flux in latest and established models = 0.215025 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.215025 Jy ! Inverting map and beam ! Estimated beam: bmin=1.05 mas, bmaj=7.613 mas, bpa=20.91 degrees ! Estimated noise=1726.82 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0209024 Jy ! Component: 100 - total flux cleaned = 0.0302381 Jy ! Component: 150 - total flux cleaned = 0.0356802 Jy ! Component: 200 - total flux cleaned = 0.0379116 Jy ! Total flux subtracted in 200 components = 0.0379116 Jy ! Clean residual min=-0.021572 max=0.019208 Jy/beam ! Clean residual mean=0.000675 rms=0.006320 Jy/beam ! Combined flux in latest and established models = 0.252937 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 52 components and 0.252937 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.758 mas, bmaj=13.13 mas, bpa=6.189 degrees ! Estimated noise=1995.65 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00112268 Jy ! Component: 100 - total flux cleaned = 0.00171521 Jy ! Component: 150 - total flux cleaned = 0.00213892 Jy ! Component: 200 - total flux cleaned = 0.00254617 Jy ! Total flux subtracted in 200 components = 0.00254617 Jy ! Clean residual min=-0.027103 max=0.024944 Jy/beam ! Clean residual mean=0.001051 rms=0.008585 Jy/beam ! Combined flux in latest and established models = 0.255483 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 63 components and 0.255483 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.05 mas, bmaj=7.613 mas, bpa=20.91 degrees ! Estimated noise=1726.82 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000284104 Jy ! Component: 100 - total flux cleaned = 0.00051045 Jy ! Component: 150 - total flux cleaned = 0.000822643 Jy ! Component: 200 - total flux cleaned = 0.00101994 Jy ! Total flux subtracted in 200 components = 0.00101994 Jy ! Clean residual min=-0.021718 max=0.018411 Jy/beam ! Clean residual mean=0.000689 rms=0.006275 Jy/beam ! Combined flux in latest and established models = 0.256503 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 79 components and 0.256503 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.212548Jy sigma=0.001285 ! Fit after self-cal, rms=0.212476Jy sigma=0.001285 wmodel J0710-3850_X_2002_05_14_yyk\_map.mod ! Writing 79 model components to file: J0710-3850_X_2002_05_14_yyk_map.mod wobs J0710-3850_X_2002_05_14_yyk\_uvs.fits ! Writing UV FITS file: J0710-3850_X_2002_05_14_yyk_uvs.fits wwins J0710-3850_X_2002_05_14_yyk\_map.win ! wwins: Wrote 1 windows to J0710-3850_X_2002_05_14_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00732524 Jy ! Component: 100 - total flux cleaned = -0.00831114 Jy ! Component: 150 - total flux cleaned = -0.00745628 Jy ! Component: 200 - total flux cleaned = -0.00536836 Jy ! Component: 250 - total flux cleaned = -0.00342938 Jy ! Component: 300 - total flux cleaned = -0.0013926 Jy ! Component: 350 - total flux cleaned = 0.000287725 Jy ! Component: 400 - total flux cleaned = 0.00206585 Jy ! Component: 450 - total flux cleaned = 0.00373702 Jy ! Component: 500 - total flux cleaned = 0.00496378 Jy ! Component: 550 - total flux cleaned = 0.00629172 Jy ! Component: 600 - total flux cleaned = 0.00770135 Jy ! Component: 650 - total flux cleaned = 0.00888448 Jy ! Component: 700 - total flux cleaned = 0.00986424 Jy ! Component: 750 - total flux cleaned = 0.0109399 Jy ! Component: 800 - total flux cleaned = 0.0118379 Jy ! Component: 850 - total flux cleaned = 0.0125777 Jy ! Component: 900 - total flux cleaned = 0.01353 Jy ! Component: 950 - total flux cleaned = 0.0141033 Jy ! Component: 1000 - total flux cleaned = 0.01499 Jy ! Component: 1050 - total flux cleaned = 0.0155261 Jy ! Component: 1100 - total flux cleaned = 0.0164606 Jy ! Component: 1150 - total flux cleaned = 0.0172675 Jy ! Component: 1200 - total flux cleaned = 0.0184424 Jy ! Component: 1250 - total flux cleaned = 0.0193 Jy ! Component: 1300 - total flux cleaned = 0.0202297 Jy ! Component: 1350 - total flux cleaned = 0.0211351 Jy ! Component: 1400 - total flux cleaned = 0.0223685 Jy ! Component: 1450 - total flux cleaned = 0.0233135 Jy ! Component: 1500 - total flux cleaned = 0.0243198 Jy ! Component: 1550 - total flux cleaned = 0.0253019 Jy ! Component: 1600 - total flux cleaned = 0.0262592 Jy ! Component: 1650 - total flux cleaned = 0.0271934 Jy ! Component: 1700 - total flux cleaned = 0.0278025 Jy ! Component: 1750 - total flux cleaned = 0.0286207 Jy ! Component: 1800 - total flux cleaned = 0.0293475 Jy ! Component: 1850 - total flux cleaned = 0.030199 Jy ! Component: 1900 - total flux cleaned = 0.0308221 Jy ! Component: 1950 - total flux cleaned = 0.0314333 Jy ! Component: 2000 - total flux cleaned = 0.0322299 Jy ! Total flux subtracted in 2048 components = 0.0328157 Jy ! Clean residual min=-0.003211 max=0.003217 Jy/beam ! Clean residual mean=0.000245 rms=0.001601 Jy/beam ! Combined flux in latest and established models = 0.289319 Jy keep ! Adding 211 model components to the UV plane model. ! The established model now contains 290 components and 0.289319 Jy ![Exited script file: muppet] wmap "J0710-3850_X_2002_05_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.05 x 7.613 at 20.91 degrees (North through East) ! Clean map min=-0.015211 max=0.077553 Jy/beam ! Writing clean map to FITS file: J0710-3850_X_2002_05_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0775534 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00153214 device "J0710-3850_X_2002_05_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J0710-3850_X_2002_05_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -5.92679 5.92679 11.8536 23.7072 47.4143 94.8287 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0045 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.077 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.05 x 7.613 at 20.91 degrees (North through East) ! Clean map min=-0.015211 max=0.077553 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0710-3850_X_2002_05_14_yyk\_map.gif/gif" ! Attempting to open device: 'J0710-3850_X_2002_05_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0710-3850_X_2002_05_14_yyk_uvs.log closed on Tue Jun 26 22:25:24 2007