! Started logfile: J0710-3850_S_2002_05_14_yyk_uvs.log on Tue Jun 26 22:25:04 2007 obs J0710-3850_S_2002_05_14_yyk_uva.fits ! Reading UV FITS file: J0710-3850_S_2002_05_14_yyk_uva.fits ! AN table 1: 38 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.594737 visibilities/baseline/integration-bin. ! Found source: J0710-3850 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22947e+09 8e+06 1 8e+06 ! 02 2 2.25947e+09 8e+06 1 8e+06 ! 03 3 2.34947e+09 8e+06 1 8e+06 ! 04 4 2.36947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1153 lines of history. ! ! Reading 4068 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0710-3850_S_2002_05_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.334822 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.911 mas, bmaj=26.29 mas, bpa=21.63 degrees ! Estimated noise=3685.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.151184 Jy ! Component: 100 - total flux cleaned = 0.194089 Jy ! Total flux subtracted in 100 components = 0.194089 Jy ! Clean residual min=-0.013587 max=0.016352 Jy/beam ! Clean residual mean=0.000528 rms=0.005697 Jy/beam ! Combined flux in latest and established models = 0.194089 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 51 model components to the UV plane model. ! The established model now contains 51 components and 0.194089 Jy ! ! Correcting IF 1. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 124 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 90 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.275565Jy sigma=0.001312 ! Fit after self-cal, rms=0.274522Jy sigma=0.001308 ! Inverting map and beam ! Estimated beam: bmin=2.911 mas, bmaj=26.29 mas, bpa=21.63 degrees ! Estimated noise=3685.67 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.896 mas, bmaj=28.75 mas, bpa=20.93 degrees ! Estimated noise=2175.46 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0379319 Jy ! Component: 100 - total flux cleaned = 0.058203 Jy ! Component: 150 - total flux cleaned = 0.0703808 Jy ! Component: 200 - total flux cleaned = 0.0781362 Jy ! Total flux subtracted in 200 components = 0.0781362 Jy ! Clean residual min=-0.012434 max=0.012078 Jy/beam ! Clean residual mean=0.000473 rms=0.004210 Jy/beam ! Combined flux in latest and established models = 0.272225 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 72 model components to the UV plane model. ! The established model now contains 118 components and 0.272226 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.271252Jy sigma=0.001285 ! Fit after self-cal, rms=0.271180Jy sigma=0.001285 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.896 x 28.75 at 20.93 degrees (North through East) ! Clean map min=-0.012085 max=0.18553 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.0033 ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.09 HN 1.00* KP 0.96 ! LA 0.95 NL 0.85 OV 0.94 PT 1.00 ! SC 1.13 MK 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.02145 ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 0.94 HN 1.00* KP 1.00* ! LA 0.94 NL 0.88 OV 0.94 PT 1.00 ! SC 0.96 MK 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Fit before self-cal, rms=0.271180Jy sigma=0.001285 ! Fit after self-cal, rms=0.269726Jy sigma=0.001283 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.269726Jy sigma=0.001283 ! Fit after self-cal, rms=0.269727Jy sigma=0.001283 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.995 mas, bmaj=27.7 mas, bpa=20.65 degrees ! Estimated noise=2158.69 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00582513 Jy ! Component: 100 - total flux cleaned = 0.00685722 Jy ! Component: 150 - total flux cleaned = 0.00749561 Jy ! Component: 200 - total flux cleaned = 0.00808583 Jy ! Total flux subtracted in 200 components = 0.00808583 Jy ! Clean residual min=-0.011974 max=0.010959 Jy/beam ! Clean residual mean=0.000350 rms=0.004016 Jy/beam ! Combined flux in latest and established models = 0.280311 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 46 model components to the UV plane model. ! The established model now contains 153 components and 0.280311 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.269491Jy sigma=0.001282 ! Fit after self-cal, rms=0.269468Jy sigma=0.001282 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.269468Jy sigma=0.001282 ! Fit after self-cal, rms=0.266799Jy sigma=0.001270 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0026762 Jy ! Component: 100 - total flux cleaned = 0.00290055 Jy ! Component: 150 - total flux cleaned = 0.00290674 Jy ! Component: 200 - total flux cleaned = 0.00299011 Jy ! Total flux subtracted in 200 components = 0.00299011 Jy ! Clean residual min=-0.013135 max=0.011857 Jy/beam ! Clean residual mean=0.000344 rms=0.003991 Jy/beam ! Combined flux in latest and established models = 0.283302 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 170 components and 0.283302 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.266745Jy sigma=0.001270 ! Fit after self-cal, rms=0.266592Jy sigma=0.001269 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.995 x 27.7 at 20.65 degrees (North through East) ! Clean map min=-0.012546 max=0.18522 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.266592Jy sigma=0.001269 ! Fit after self-cal, rms=0.264984Jy sigma=0.001269 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.264984Jy sigma=0.001269 ! Fit after self-cal, rms=0.264938Jy sigma=0.001269 ! Inverting map and beam ! Estimated beam: bmin=4.02 mas, bmaj=27.34 mas, bpa=20.54 degrees ! Estimated noise=2146.67 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000808579 Jy ! Component: 100 - total flux cleaned = 0.000955167 Jy ! Component: 150 - total flux cleaned = 0.00101221 Jy ! Component: 200 - total flux cleaned = 0.00107111 Jy ! Total flux subtracted in 200 components = 0.00107111 Jy ! Clean residual min=-0.012092 max=0.010999 Jy/beam ! Clean residual mean=0.000281 rms=0.003838 Jy/beam ! Combined flux in latest and established models = 0.284373 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 189 components and 0.284373 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.264907Jy sigma=0.001269 ! Fit after self-cal, rms=0.264799Jy sigma=0.001269 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.264799Jy sigma=0.001269 ! Fit after self-cal, rms=0.264353Jy sigma=0.001269 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.264353Jy sigma=0.001269 ! Fit after self-cal, rms=0.264181Jy sigma=0.001268 ! Inverting map and beam ! Estimated beam: bmin=3.985 mas, bmaj=27.08 mas, bpa=20.59 degrees ! Estimated noise=2134.3 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00132586 Jy ! Component: 100 - total flux cleaned = 0.00174171 Jy ! Component: 150 - total flux cleaned = 0.00186257 Jy ! Component: 200 - total flux cleaned = 0.00203186 Jy ! Total flux subtracted in 200 components = 0.00203186 Jy ! Clean residual min=-0.011535 max=0.011018 Jy/beam ! Clean residual mean=0.000301 rms=0.003729 Jy/beam ! Combined flux in latest and established models = 0.286405 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 207 components and 0.286405 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.264157Jy sigma=0.001268 ! Fit after self-cal, rms=0.263928Jy sigma=0.001267 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.459 mas, bmaj=42.86 mas, bpa=7.281 degrees ! Estimated noise=2439.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000677435 Jy ! Component: 100 - total flux cleaned = -0.000499067 Jy ! Component: 150 - total flux cleaned = -0.000501805 Jy ! Component: 200 - total flux cleaned = -0.000572749 Jy ! Total flux subtracted in 200 components = -0.000572749 Jy ! Clean residual min=-0.012700 max=0.014077 Jy/beam ! Clean residual mean=0.000466 rms=0.004997 Jy/beam ! Combined flux in latest and established models = 0.285832 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 218 components and 0.285832 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.263904Jy sigma=0.001267 ! Fit after self-cal, rms=0.264052Jy sigma=0.001267 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.955 mas, bmaj=25.23 mas, bpa=21.47 degrees ! Estimated noise=3661.55 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.155547 Jy ! Component: 100 - total flux cleaned = 0.199238 Jy ! Component: 150 - total flux cleaned = 0.225457 Jy ! Component: 200 - total flux cleaned = 0.242502 Jy ! Total flux subtracted in 200 components = 0.242502 Jy ! Clean residual min=-0.012692 max=0.010474 Jy/beam ! Clean residual mean=0.000392 rms=0.003823 Jy/beam ! Combined flux in latest and established models = 0.242502 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 66 model components to the UV plane model. ! The established model now contains 66 components and 0.242502 Jy ! Inverting map and beam ! Estimated beam: bmin=3.985 mas, bmaj=27.08 mas, bpa=20.59 degrees ! Estimated noise=2134.3 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0180148 Jy ! Component: 100 - total flux cleaned = 0.028434 Jy ! Component: 150 - total flux cleaned = 0.0349624 Jy ! Component: 200 - total flux cleaned = 0.0392586 Jy ! Total flux subtracted in 200 components = 0.0392586 Jy ! Clean residual min=-0.011261 max=0.011240 Jy/beam ! Clean residual mean=0.000354 rms=0.003843 Jy/beam ! Combined flux in latest and established models = 0.281761 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 116 components and 0.281761 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.459 mas, bmaj=42.86 mas, bpa=7.281 degrees ! Estimated noise=2439.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00236352 Jy ! Component: 100 - total flux cleaned = 0.00300121 Jy ! Component: 150 - total flux cleaned = 0.00352653 Jy ! Component: 200 - total flux cleaned = 0.00352306 Jy ! Total flux subtracted in 200 components = 0.00352306 Jy ! Clean residual min=-0.012545 max=0.015051 Jy/beam ! Clean residual mean=0.000479 rms=0.005083 Jy/beam ! Combined flux in latest and established models = 0.285284 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 132 components and 0.285284 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.985 mas, bmaj=27.08 mas, bpa=20.59 degrees ! Estimated noise=2134.3 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000687386 Jy ! Component: 100 - total flux cleaned = 0.000909418 Jy ! Component: 150 - total flux cleaned = 0.000972124 Jy ! Component: 200 - total flux cleaned = 0.00103038 Jy ! Total flux subtracted in 200 components = 0.00103038 Jy ! Clean residual min=-0.011424 max=0.011117 Jy/beam ! Clean residual mean=0.000312 rms=0.003756 Jy/beam ! Combined flux in latest and established models = 0.286315 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 158 components and 0.286314 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.264032Jy sigma=0.001268 ! Fit after self-cal, rms=0.263880Jy sigma=0.001267 wmodel J0710-3850_S_2002_05_14_yyk\_map.mod ! Writing 158 model components to file: J0710-3850_S_2002_05_14_yyk_map.mod wobs J0710-3850_S_2002_05_14_yyk\_uvs.fits ! Writing UV FITS file: J0710-3850_S_2002_05_14_yyk_uvs.fits wwins J0710-3850_S_2002_05_14_yyk\_map.win ! wwins: Wrote 1 windows to J0710-3850_S_2002_05_14_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000940503 Jy ! Component: 100 - total flux cleaned = 0.00179137 Jy ! Component: 150 - total flux cleaned = 0.0024116 Jy ! Component: 200 - total flux cleaned = 0.00296437 Jy ! Component: 250 - total flux cleaned = 0.00309831 Jy ! Component: 300 - total flux cleaned = 0.0029753 Jy ! Component: 350 - total flux cleaned = 0.00274607 Jy ! Component: 400 - total flux cleaned = 0.00264145 Jy ! Component: 450 - total flux cleaned = 0.00264151 Jy ! Component: 500 - total flux cleaned = 0.00292812 Jy ! Component: 550 - total flux cleaned = 0.00283392 Jy ! Component: 600 - total flux cleaned = 0.00283263 Jy ! Component: 650 - total flux cleaned = 0.00274655 Jy ! Component: 700 - total flux cleaned = 0.00274715 Jy ! Component: 750 - total flux cleaned = 0.00290535 Jy ! Component: 800 - total flux cleaned = 0.00305762 Jy ! Component: 850 - total flux cleaned = 0.00320572 Jy ! Component: 900 - total flux cleaned = 0.00349534 Jy ! Component: 950 - total flux cleaned = 0.00391417 Jy ! Component: 1000 - total flux cleaned = 0.00438842 Jy ! Component: 1050 - total flux cleaned = 0.00484885 Jy ! Component: 1100 - total flux cleaned = 0.00529586 Jy ! Component: 1150 - total flux cleaned = 0.00560836 Jy ! Component: 1200 - total flux cleaned = 0.00615791 Jy ! Component: 1250 - total flux cleaned = 0.00651598 Jy ! Component: 1300 - total flux cleaned = 0.00663348 Jy ! Component: 1350 - total flux cleaned = 0.00663341 Jy ! Component: 1400 - total flux cleaned = 0.00657624 Jy ! Component: 1450 - total flux cleaned = 0.00646322 Jy ! Component: 1500 - total flux cleaned = 0.00629505 Jy ! Component: 1550 - total flux cleaned = 0.00612896 Jy ! Component: 1600 - total flux cleaned = 0.00601907 Jy ! Component: 1650 - total flux cleaned = 0.00590879 Jy ! Component: 1700 - total flux cleaned = 0.00569096 Jy ! Component: 1750 - total flux cleaned = 0.0055825 Jy ! Component: 1800 - total flux cleaned = 0.00547416 Jy ! Component: 1850 - total flux cleaned = 0.00520622 Jy ! Component: 1900 - total flux cleaned = 0.00515262 Jy ! Component: 1950 - total flux cleaned = 0.00504556 Jy ! Component: 2000 - total flux cleaned = 0.00509904 Jy ! Total flux subtracted in 2048 components = 0.00520638 Jy ! Clean residual min=-0.003223 max=0.003042 Jy/beam ! Clean residual mean=0.000156 rms=0.001263 Jy/beam ! Combined flux in latest and established models = 0.291521 Jy keep ! Adding 170 model components to the UV plane model. ! The established model now contains 328 components and 0.291521 Jy ![Exited script file: muppet] wmap "J0710-3850_S_2002_05_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.985 x 27.08 at 20.59 degrees (North through East) ! Clean map min=-0.0079222 max=0.18409 Jy/beam ! Writing clean map to FITS file: J0710-3850_S_2002_05_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.184087 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00131811 device "J0710-3850_S_2002_05_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J0710-3850_S_2002_05_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.14807 2.14807 4.29615 8.5923 17.1846 34.3692 68.7384 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0039 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.184 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.985 x 27.08 at 20.59 degrees (North through East) ! Clean map min=-0.0079222 max=0.18409 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0710-3850_S_2002_05_14_yyk\_map.gif/gif" ! Attempting to open device: 'J0710-3850_S_2002_05_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0710-3850_S_2002_05_14_yyk_uvs.log closed on Tue Jun 26 22:25:12 2007