! Started logfile: J0710-3850_S_2002_01_31_yyk_uvs.log on Tue Jun 26 22:24:58 2007 obs J0710-3850_S_2002_01_31_yyk_uva.fits ! Reading UV FITS file: J0710-3850_S_2002_01_31_yyk_uva.fits ! AN table 1: 37 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.767568 visibilities/baseline/integration-bin. ! Found source: J0710-3850 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22947e+09 8e+06 1 8e+06 ! 02 2 2.25947e+09 8e+06 1 8e+06 ! 03 3 2.34947e+09 8e+06 1 8e+06 ! 04 4 2.36947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1224 lines of history. ! ! Reading 5112 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0710-3850_S_2002_01_31_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.272778 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.387 mas, bmaj=6.829 mas, bpa=0.9988 degrees ! Estimated noise=3114.92 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.122439 Jy ! Component: 100 - total flux cleaned = 0.158539 Jy ! Total flux subtracted in 100 components = 0.158539 Jy ! Clean residual min=-0.013349 max=0.019082 Jy/beam ! Clean residual mean=0.000618 rms=0.004913 Jy/beam ! Combined flux in latest and established models = 0.158539 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.158539 Jy ! ! Correcting IF 1. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 118 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 82 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.221000Jy sigma=0.001259 ! Fit after self-cal, rms=0.220842Jy sigma=0.001258 ! Inverting map and beam ! Estimated beam: bmin=2.387 mas, bmaj=6.829 mas, bpa=0.9988 degrees ! Estimated noise=3114.92 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.126 mas, bmaj=8.496 mas, bpa=0.4226 degrees ! Estimated noise=1709.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0308102 Jy ! Component: 100 - total flux cleaned = 0.0416917 Jy ! Component: 150 - total flux cleaned = 0.0457278 Jy ! Component: 200 - total flux cleaned = 0.0464453 Jy ! Total flux subtracted in 200 components = 0.0464453 Jy ! Clean residual min=-0.011290 max=0.021555 Jy/beam ! Clean residual mean=0.000956 rms=0.005217 Jy/beam ! Combined flux in latest and established models = 0.204984 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 50 components and 0.204984 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.218824Jy sigma=0.001239 ! Fit after self-cal, rms=0.218804Jy sigma=0.001239 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.126 x 8.496 at 0.4226 degrees (North through East) ! Clean map min=-0.01104 max=0.13698 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.218804Jy sigma=0.001239 ! Fit after self-cal, rms=0.218657Jy sigma=0.001238 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.218657Jy sigma=0.001238 ! Fit after self-cal, rms=0.218661Jy sigma=0.001238 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.126 mas, bmaj=8.497 mas, bpa=0.4571 degrees ! Estimated noise=1710.82 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000380518 Jy ! Component: 100 - total flux cleaned = 0.000595853 Jy ! Component: 150 - total flux cleaned = 0.000597704 Jy ! Component: 200 - total flux cleaned = 0.000601768 Jy ! Total flux subtracted in 200 components = 0.000601768 Jy ! Clean residual min=-0.011183 max=0.021494 Jy/beam ! Clean residual mean=0.000951 rms=0.005206 Jy/beam ! Combined flux in latest and established models = 0.205586 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 56 components and 0.205586 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.218641Jy sigma=0.001238 ! Fit after self-cal, rms=0.218623Jy sigma=0.001238 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.218623Jy sigma=0.001238 ! Fit after self-cal, rms=0.217051Jy sigma=0.001227 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00142429 Jy ! Component: 100 - total flux cleaned = 0.00182925 Jy ! Component: 150 - total flux cleaned = 0.00197965 Jy ! Component: 200 - total flux cleaned = 0.00211956 Jy ! Total flux subtracted in 200 components = 0.00211956 Jy ! Clean residual min=-0.011487 max=0.021951 Jy/beam ! Clean residual mean=0.000959 rms=0.005104 Jy/beam ! Combined flux in latest and established models = 0.207705 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 59 components and 0.207705 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.216992Jy sigma=0.001227 ! Fit after self-cal, rms=0.216899Jy sigma=0.001226 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.126 x 8.497 at 0.4571 degrees (North through East) ! Clean map min=-0.011229 max=0.13627 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.216899Jy sigma=0.001226 ! Fit after self-cal, rms=0.216899Jy sigma=0.001226 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.216899Jy sigma=0.001226 ! Fit after self-cal, rms=0.216896Jy sigma=0.001226 ! Inverting map and beam ! Estimated beam: bmin=3.126 mas, bmaj=8.497 mas, bpa=0.4571 degrees ! Estimated noise=1710.82 mJy/beam. ! Added new window around map position (9.5, 4.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0236475 Jy ! Component: 100 - total flux cleaned = 0.0319055 Jy ! Component: 150 - total flux cleaned = 0.0335392 Jy ! Component: 200 - total flux cleaned = 0.0347263 Jy ! Total flux subtracted in 200 components = 0.0347263 Jy ! Clean residual min=-0.010853 max=0.011622 Jy/beam ! Clean residual mean=0.000719 rms=0.003601 Jy/beam ! Combined flux in latest and established models = 0.242432 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 40 model components to the UV plane model. ! The established model now contains 96 components and 0.242432 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.214738Jy sigma=0.001214 ! Fit after self-cal, rms=0.214538Jy sigma=0.001212 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.214538Jy sigma=0.001212 ! Fit after self-cal, rms=0.214538Jy sigma=0.001212 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.214538Jy sigma=0.001212 ! Fit after self-cal, rms=0.214541Jy sigma=0.001212 ! Inverting map and beam ! Estimated beam: bmin=3.126 mas, bmaj=8.497 mas, bpa=0.4571 degrees ! Estimated noise=1710.82 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00709457 Jy ! Component: 100 - total flux cleaned = 0.00775919 Jy ! Component: 150 - total flux cleaned = 0.00824164 Jy ! Component: 200 - total flux cleaned = 0.00834336 Jy ! Total flux subtracted in 200 components = 0.00834336 Jy ! Clean residual min=-0.009152 max=0.010437 Jy/beam ! Clean residual mean=0.000677 rms=0.003189 Jy/beam ! Combined flux in latest and established models = 0.250775 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 116 components and 0.250775 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.214225Jy sigma=0.001210 ! Fit after self-cal, rms=0.214204Jy sigma=0.001210 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.19 mas, bmaj=32.84 mas, bpa=5.018 degrees ! Estimated noise=2163.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0044147 Jy ! Component: 100 - total flux cleaned = 0.00460779 Jy ! Component: 150 - total flux cleaned = 0.00478531 Jy ! Component: 200 - total flux cleaned = 0.004863 Jy ! Total flux subtracted in 200 components = 0.004863 Jy ! Clean residual min=-0.009870 max=0.015087 Jy/beam ! Clean residual mean=0.001198 rms=0.004844 Jy/beam ! Combined flux in latest and established models = 0.255638 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 124 components and 0.255638 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.214124Jy sigma=0.001210 ! Fit after self-cal, rms=0.214120Jy sigma=0.001210 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.387 mas, bmaj=6.829 mas, bpa=0.9994 degrees ! Estimated noise=3115.44 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.124346 Jy ! Component: 100 - total flux cleaned = 0.163834 Jy ! Component: 150 - total flux cleaned = 0.187771 Jy ! Component: 200 - total flux cleaned = 0.204732 Jy ! Total flux subtracted in 200 components = 0.204732 Jy ! Clean residual min=-0.011282 max=0.011956 Jy/beam ! Clean residual mean=0.000529 rms=0.003693 Jy/beam ! Combined flux in latest and established models = 0.204732 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 53 model components to the UV plane model. ! The established model now contains 53 components and 0.204732 Jy ! Inverting map and beam ! Estimated beam: bmin=3.126 mas, bmaj=8.497 mas, bpa=0.4571 degrees ! Estimated noise=1710.82 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0213413 Jy ! Component: 100 - total flux cleaned = 0.0328149 Jy ! Component: 150 - total flux cleaned = 0.0397108 Jy ! Component: 200 - total flux cleaned = 0.0440101 Jy ! Total flux subtracted in 200 components = 0.0440101 Jy ! Clean residual min=-0.008519 max=0.009940 Jy/beam ! Clean residual mean=0.000700 rms=0.003027 Jy/beam ! Combined flux in latest and established models = 0.248742 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 97 components and 0.248742 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.19 mas, bmaj=32.84 mas, bpa=5.018 degrees ! Estimated noise=2163.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0052285 Jy ! Component: 100 - total flux cleaned = 0.00690434 Jy ! Component: 150 - total flux cleaned = 0.00707988 Jy ! Component: 200 - total flux cleaned = 0.00725126 Jy ! Total flux subtracted in 200 components = 0.00725126 Jy ! Clean residual min=-0.009947 max=0.014704 Jy/beam ! Clean residual mean=0.001199 rms=0.004689 Jy/beam ! Combined flux in latest and established models = 0.255993 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 108 components and 0.255993 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.126 mas, bmaj=8.497 mas, bpa=0.4571 degrees ! Estimated noise=1710.82 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00160114 Jy ! Component: 100 - total flux cleaned = -0.00171309 Jy ! Component: 150 - total flux cleaned = -0.0017194 Jy ! Component: 200 - total flux cleaned = -0.00179115 Jy ! Total flux subtracted in 200 components = -0.00179115 Jy ! Clean residual min=-0.008260 max=0.009987 Jy/beam ! Clean residual mean=0.000666 rms=0.002940 Jy/beam ! Combined flux in latest and established models = 0.254202 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 125 components and 0.254202 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.214053Jy sigma=0.001209 ! Fit after self-cal, rms=0.214045Jy sigma=0.001209 wmodel J0710-3850_S_2002_01_31_yyk\_map.mod ! Writing 125 model components to file: J0710-3850_S_2002_01_31_yyk_map.mod wobs J0710-3850_S_2002_01_31_yyk\_uvs.fits ! Writing UV FITS file: J0710-3850_S_2002_01_31_yyk_uvs.fits wwins J0710-3850_S_2002_01_31_yyk\_map.win ! wwins: Wrote 2 windows to J0710-3850_S_2002_01_31_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00334075 Jy ! Component: 100 - total flux cleaned = 0.00451476 Jy ! Component: 150 - total flux cleaned = 0.00555907 Jy ! Component: 200 - total flux cleaned = 0.00640769 Jy ! Component: 250 - total flux cleaned = 0.00730921 Jy ! Component: 300 - total flux cleaned = 0.00814782 Jy ! Component: 350 - total flux cleaned = 0.00903254 Jy ! Component: 400 - total flux cleaned = 0.00977197 Jy ! Component: 450 - total flux cleaned = 0.0101248 Jy ! Component: 500 - total flux cleaned = 0.01029 Jy ! Component: 550 - total flux cleaned = 0.0103648 Jy ! Component: 600 - total flux cleaned = 0.0102858 Jy ! Component: 650 - total flux cleaned = 0.010432 Jy ! Component: 700 - total flux cleaned = 0.0104306 Jy ! Component: 750 - total flux cleaned = 0.0105664 Jy ! Component: 800 - total flux cleaned = 0.0105668 Jy ! Component: 850 - total flux cleaned = 0.0107593 Jy ! Component: 900 - total flux cleaned = 0.0109476 Jy ! Component: 950 - total flux cleaned = 0.0112536 Jy ! Component: 1000 - total flux cleaned = 0.0114919 Jy ! Component: 1050 - total flux cleaned = 0.0117243 Jy ! Component: 1100 - total flux cleaned = 0.0118377 Jy ! Component: 1150 - total flux cleaned = 0.0118933 Jy ! Component: 1200 - total flux cleaned = 0.0119475 Jy ! Component: 1250 - total flux cleaned = 0.0119475 Jy ! Component: 1300 - total flux cleaned = 0.0118957 Jy ! Component: 1350 - total flux cleaned = 0.0118952 Jy ! Component: 1400 - total flux cleaned = 0.011795 Jy ! Component: 1450 - total flux cleaned = 0.0116476 Jy ! Component: 1500 - total flux cleaned = 0.011599 Jy ! Component: 1550 - total flux cleaned = 0.0115037 Jy ! Component: 1600 - total flux cleaned = 0.0114558 Jy ! Component: 1650 - total flux cleaned = 0.0113626 Jy ! Component: 1700 - total flux cleaned = 0.0112256 Jy ! Component: 1750 - total flux cleaned = 0.0111805 Jy ! Component: 1800 - total flux cleaned = 0.0112254 Jy ! Component: 1850 - total flux cleaned = 0.0112702 Jy ! Component: 1900 - total flux cleaned = 0.0112704 Jy ! Component: 1950 - total flux cleaned = 0.0113133 Jy ! Component: 2000 - total flux cleaned = 0.0113555 Jy ! Total flux subtracted in 2048 components = 0.0113974 Jy ! Clean residual min=-0.002438 max=0.002550 Jy/beam ! Clean residual mean=0.000238 rms=0.000908 Jy/beam ! Combined flux in latest and established models = 0.265599 Jy keep ! Adding 144 model components to the UV plane model. ! The established model now contains 269 components and 0.2656 Jy ![Exited script file: muppet] wmap "J0710-3850_S_2002_01_31_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.126 x 8.497 at 0.4571 degrees (North through East) ! Clean map min=-0.0051266 max=0.13213 Jy/beam ! Writing clean map to FITS file: J0710-3850_S_2002_01_31_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.132134 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000900231 device "J0710-3850_S_2002_01_31_yyk\_map.eps/VPS" ! Attempting to open device: 'J0710-3850_S_2002_01_31_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.04391 2.04391 4.08781 8.17563 16.3513 32.7025 65.405 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0027 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.132 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.126 x 8.497 at 0.4571 degrees (North through East) ! Clean map min=-0.0051266 max=0.13213 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0710-3850_S_2002_01_31_yyk\_map.gif/gif" ! Attempting to open device: 'J0710-3850_S_2002_01_31_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0710-3850_S_2002_01_31_yyk_uvs.log closed on Tue Jun 26 22:25:04 2007