! Started logfile: J0641-0320_S_2002_05_14_yyk_uvs.log on Tue Jun 26 22:23:27 2007 obs J0641-0320_S_2002_05_14_yyk_uva.fits ! Reading UV FITS file: J0641-0320_S_2002_05_14_yyk_uva.fits ! AN table 1: 85 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.760523 visibilities/baseline/integration-bin. ! Found source: J0641-0320 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22947e+09 8e+06 1 8e+06 ! 02 2 2.25947e+09 8e+06 1 8e+06 ! 03 3 2.34947e+09 8e+06 1 8e+06 ! 04 4 2.36947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1153 lines of history. ! ! Reading 11636 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0641-0320_S_2002_05_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.492633 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.916 mas, bmaj=6.527 mas, bpa=1.089 degrees ! Estimated noise=1415.25 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.364205 Jy ! Component: 100 - total flux cleaned = 0.473537 Jy ! Total flux subtracted in 100 components = 0.473537 Jy ! Clean residual min=-0.019626 max=0.040076 Jy/beam ! Clean residual mean=0.000314 rms=0.005917 Jy/beam ! Combined flux in latest and established models = 0.473537 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.473537 Jy ! ! Correcting IF 1. ! A total of 116 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 199 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 116 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 116 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.214197Jy sigma=0.001366 ! Fit after self-cal, rms=0.213970Jy sigma=0.001364 ! Inverting map and beam ! Estimated beam: bmin=2.916 mas, bmaj=6.527 mas, bpa=1.089 degrees ! Estimated noise=1415.29 mJy/beam. ! Added new window around map position (-3.5, -1). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0520826 Jy ! Component: 100 - total flux cleaned = 0.0735533 Jy ! Total flux subtracted in 100 components = 0.0735533 Jy ! Clean residual min=-0.014917 max=0.020715 Jy/beam ! Clean residual mean=0.000031 rms=0.003384 Jy/beam ! Combined flux in latest and established models = 0.54709 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 32 components and 0.54709 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.203720Jy sigma=0.001290 ! Fit after self-cal, rms=0.203603Jy sigma=0.001289 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.83 mas, bmaj=8.186 mas, bpa=0.7823 degrees ! Estimated noise=992.921 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0116052 Jy ! Component: 100 - total flux cleaned = 0.0126401 Jy ! Component: 150 - total flux cleaned = 0.0134135 Jy ! Component: 200 - total flux cleaned = 0.0136334 Jy ! Total flux subtracted in 200 components = 0.0136334 Jy ! Clean residual min=-0.010029 max=0.008981 Jy/beam ! Clean residual mean=-0.000028 rms=0.002494 Jy/beam ! Combined flux in latest and established models = 0.560723 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 44 components and 0.560723 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.202355Jy sigma=0.001282 ! Fit after self-cal, rms=0.202334Jy sigma=0.001281 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.83 x 8.186 at 0.7823 degrees (North through East) ! Clean map min=-0.0090306 max=0.38754 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00969 ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 1.14 HN 0.94 KP 0.94 ! LA 0.98 NL 0.89 OV 0.99 PT 1.07 ! SC 1.09 MK 0.99 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.00302 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.02 HN 1.00 KP 1.00* ! LA 1.00 NL 0.96 OV 1.01 PT 1.01 ! SC 1.03 MK 1.01 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.976037 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.97 HN 1.05 KP 1.02 ! LA 1.01 NL 1.06 OV 1.10 PT 1.17 ! SC 0.99 MK 0.82 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.03801 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.89 HN 0.98 KP 1.07 ! LA 0.84 NL 1.05 OV 0.92 PT 1.02 ! SC 0.98 MK 0.87 ! ! ! Fit before self-cal, rms=0.202334Jy sigma=0.001281 ! Fit after self-cal, rms=0.195612Jy sigma=0.001247 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.195612Jy sigma=0.001247 ! Fit after self-cal, rms=0.195613Jy sigma=0.001247 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.672 mas, bmaj=8.108 mas, bpa=-1.679 degrees ! Estimated noise=987.699 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00771203 Jy ! Component: 100 - total flux cleaned = 0.00851221 Jy ! Component: 150 - total flux cleaned = 0.00877557 Jy ! Component: 200 - total flux cleaned = 0.00888548 Jy ! Total flux subtracted in 200 components = 0.00888548 Jy ! Clean residual min=-0.007223 max=0.007221 Jy/beam ! Clean residual mean=-0.000019 rms=0.001539 Jy/beam ! Combined flux in latest and established models = 0.569609 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 55 components and 0.569609 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.195357Jy sigma=0.001245 ! Fit after self-cal, rms=0.195356Jy sigma=0.001245 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.195356Jy sigma=0.001245 ! Fit after self-cal, rms=0.189404Jy sigma=0.001209 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00227166 Jy ! Component: 100 - total flux cleaned = 0.00189255 Jy ! Component: 150 - total flux cleaned = 0.00167199 Jy ! Component: 200 - total flux cleaned = 0.00147279 Jy ! Total flux subtracted in 200 components = 0.00147279 Jy ! Clean residual min=-0.006821 max=0.006604 Jy/beam ! Clean residual mean=-0.000023 rms=0.001475 Jy/beam ! Combined flux in latest and established models = 0.571082 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 59 components and 0.571082 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.189246Jy sigma=0.001209 ! Fit after self-cal, rms=0.188593Jy sigma=0.001205 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.672 x 8.108 at -1.679 degrees (North through East) ! Clean map min=-0.0063685 max=0.38147 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.188593Jy sigma=0.001205 ! Fit after self-cal, rms=0.185965Jy sigma=0.001196 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.185965Jy sigma=0.001196 ! Fit after self-cal, rms=0.185846Jy sigma=0.001195 ! Inverting map and beam ! Estimated beam: bmin=3.575 mas, bmaj=8.059 mas, bpa=-2.829 degrees ! Estimated noise=973.608 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000181371 Jy ! Component: 100 - total flux cleaned = -0.000215767 Jy ! Component: 150 - total flux cleaned = -0.000383066 Jy ! Component: 200 - total flux cleaned = -0.000539969 Jy ! Total flux subtracted in 200 components = -0.000539969 Jy ! Clean residual min=-0.006478 max=0.005653 Jy/beam ! Clean residual mean=-0.000025 rms=0.001433 Jy/beam ! Combined flux in latest and established models = 0.570542 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 64 components and 0.570542 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.185765Jy sigma=0.001194 ! Fit after self-cal, rms=0.185742Jy sigma=0.001194 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.185742Jy sigma=0.001194 ! Fit after self-cal, rms=0.187120Jy sigma=0.001190 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.187120Jy sigma=0.001190 ! Fit after self-cal, rms=0.187124Jy sigma=0.001191 ! Inverting map and beam ! Estimated beam: bmin=3.595 mas, bmaj=8.079 mas, bpa=-2.539 degrees ! Estimated noise=976.365 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000182764 Jy ! Component: 100 - total flux cleaned = 0.000106288 Jy ! Component: 150 - total flux cleaned = 0.000106656 Jy ! Component: 200 - total flux cleaned = -2.72043e-05 Jy ! Total flux subtracted in 200 components = -2.72043e-05 Jy ! Clean residual min=-0.006282 max=0.005185 Jy/beam ! Clean residual mean=-0.000024 rms=0.001386 Jy/beam ! Combined flux in latest and established models = 0.570514 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 71 components and 0.570514 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.187067Jy sigma=0.001190 ! Fit after self-cal, rms=0.187071Jy sigma=0.001190 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.005 mas, bmaj=13.4 mas, bpa=11.01 degrees ! Estimated noise=1188.27 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000551642 Jy ! Component: 100 - total flux cleaned = 0.000636783 Jy ! Component: 150 - total flux cleaned = 0.000635534 Jy ! Component: 200 - total flux cleaned = 0.00059931 Jy ! Total flux subtracted in 200 components = 0.00059931 Jy ! Clean residual min=-0.003849 max=0.004044 Jy/beam ! Clean residual mean=-0.000052 rms=0.001313 Jy/beam ! Combined flux in latest and established models = 0.571114 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 76 components and 0.571114 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.187069Jy sigma=0.001190 ! Fit after self-cal, rms=0.187076Jy sigma=0.001190 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.849 mas, bmaj=6.498 mas, bpa=-0.2189 degrees ! Estimated noise=1378 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.364013 Jy ! Component: 100 - total flux cleaned = 0.477116 Jy ! Component: 150 - total flux cleaned = 0.528374 Jy ! Component: 200 - total flux cleaned = 0.55146 Jy ! Total flux subtracted in 200 components = 0.55146 Jy ! Clean residual min=-0.012970 max=0.015448 Jy/beam ! Clean residual mean=0.000049 rms=0.002649 Jy/beam ! Combined flux in latest and established models = 0.55146 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.55146 Jy ! Inverting map and beam ! Estimated beam: bmin=3.595 mas, bmaj=8.079 mas, bpa=-2.539 degrees ! Estimated noise=976.365 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4, 1.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0145603 Jy ! Component: 100 - total flux cleaned = 0.0150379 Jy ! Component: 150 - total flux cleaned = 0.0146369 Jy ! Component: 200 - total flux cleaned = 0.0151264 Jy ! Total flux subtracted in 200 components = 0.0151264 Jy ! Clean residual min=-0.005046 max=0.004665 Jy/beam ! Clean residual mean=-0.000004 rms=0.001270 Jy/beam ! Combined flux in latest and established models = 0.566587 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 47 components and 0.566587 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.005 mas, bmaj=13.4 mas, bpa=11.01 degrees ! Estimated noise=1188.27 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00371071 Jy ! Component: 100 - total flux cleaned = 0.00393562 Jy ! Component: 150 - total flux cleaned = 0.00385114 Jy ! Component: 200 - total flux cleaned = 0.00371611 Jy ! Total flux subtracted in 200 components = 0.00371611 Jy ! Clean residual min=-0.003604 max=0.003746 Jy/beam ! Clean residual mean=-0.000042 rms=0.001206 Jy/beam ! Combined flux in latest and established models = 0.570303 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 69 components and 0.570302 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.595 mas, bmaj=8.079 mas, bpa=-2.539 degrees ! Estimated noise=976.365 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00151883 Jy ! Component: 100 - total flux cleaned = -0.00119374 Jy ! Component: 150 - total flux cleaned = -0.000796153 Jy ! Component: 200 - total flux cleaned = -0.000568293 Jy ! Total flux subtracted in 200 components = -0.000568293 Jy ! Clean residual min=-0.003919 max=0.004063 Jy/beam ! Clean residual mean=-0.000017 rms=0.001065 Jy/beam ! Combined flux in latest and established models = 0.569734 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 88 components and 0.569734 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.186540Jy sigma=0.001187 ! Fit after self-cal, rms=0.186491Jy sigma=0.001187 wmodel J0641-0320_S_2002_05_14_yyk\_map.mod ! Writing 88 model components to file: J0641-0320_S_2002_05_14_yyk_map.mod wobs J0641-0320_S_2002_05_14_yyk\_uvs.fits ! Writing UV FITS file: J0641-0320_S_2002_05_14_yyk_uvs.fits wwins J0641-0320_S_2002_05_14_yyk\_map.win ! wwins: Wrote 3 windows to J0641-0320_S_2002_05_14_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000775736 Jy ! Component: 100 - total flux cleaned = 0.000644951 Jy ! Component: 150 - total flux cleaned = 0.000528789 Jy ! Component: 200 - total flux cleaned = 0.000136464 Jy ! Component: 250 - total flux cleaned = -0.000182655 Jy ! Component: 300 - total flux cleaned = -0.000487725 Jy ! Component: 350 - total flux cleaned = -0.000683901 Jy ! Component: 400 - total flux cleaned = -0.00082569 Jy ! Component: 450 - total flux cleaned = -0.00100839 Jy ! Component: 500 - total flux cleaned = -0.00114119 Jy ! Component: 550 - total flux cleaned = -0.00109913 Jy ! Component: 600 - total flux cleaned = -0.00118112 Jy ! Component: 650 - total flux cleaned = -0.00105924 Jy ! Component: 700 - total flux cleaned = -0.000980162 Jy ! Component: 750 - total flux cleaned = -0.000979327 Jy ! Component: 800 - total flux cleaned = -0.00105457 Jy ! Component: 850 - total flux cleaned = -0.00120138 Jy ! Component: 900 - total flux cleaned = -0.00130802 Jy ! Component: 950 - total flux cleaned = -0.00130706 Jy ! Component: 1000 - total flux cleaned = -0.00134176 Jy ! Component: 1050 - total flux cleaned = -0.00137623 Jy ! Component: 1100 - total flux cleaned = -0.00137645 Jy ! Component: 1150 - total flux cleaned = -0.00144278 Jy ! Component: 1200 - total flux cleaned = -0.00144219 Jy ! Component: 1250 - total flux cleaned = -0.00147428 Jy ! Component: 1300 - total flux cleaned = -0.00144238 Jy ! Component: 1350 - total flux cleaned = -0.00150437 Jy ! Component: 1400 - total flux cleaned = -0.00141265 Jy ! Component: 1450 - total flux cleaned = -0.00138338 Jy ! Component: 1500 - total flux cleaned = -0.00150204 Jy ! Component: 1550 - total flux cleaned = -0.00147259 Jy ! Component: 1600 - total flux cleaned = -0.00150099 Jy ! Component: 1650 - total flux cleaned = -0.00147274 Jy ! Component: 1700 - total flux cleaned = -0.00158598 Jy ! Component: 1750 - total flux cleaned = -0.0015861 Jy ! Component: 1800 - total flux cleaned = -0.00164129 Jy ! Component: 1850 - total flux cleaned = -0.00161398 Jy ! Component: 1900 - total flux cleaned = -0.00161422 Jy ! Component: 1950 - total flux cleaned = -0.00158759 Jy ! Component: 2000 - total flux cleaned = -0.00169293 Jy ! Total flux subtracted in 2048 components = -0.00166648 Jy ! Clean residual min=-0.001610 max=0.001642 Jy/beam ! Clean residual mean=0.000001 rms=0.000522 Jy/beam ! Combined flux in latest and established models = 0.568068 Jy keep ! Adding 133 model components to the UV plane model. ! The established model now contains 219 components and 0.568067 Jy ![Exited script file: muppet] wmap "J0641-0320_S_2002_05_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.595 x 8.079 at -2.539 degrees (North through East) ! Clean map min=-0.0084097 max=0.37304 Jy/beam ! Writing clean map to FITS file: J0641-0320_S_2002_05_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.373038 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000516759 device "J0641-0320_S_2002_05_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J0641-0320_S_2002_05_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.415582 0.415582 0.831164 1.66233 3.32466 6.64931 13.2986 26.5973 53.1945 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.373 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.595 x 8.079 at -2.539 degrees (North through East) ! Clean map min=-0.0084097 max=0.37304 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0641-0320_S_2002_05_14_yyk\_map.gif/gif" ! Attempting to open device: 'J0641-0320_S_2002_05_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0641-0320_S_2002_05_14_yyk_uvs.log closed on Tue Jun 26 22:23:35 2007