! Started logfile: J0639-3346_S_2002_01_31_yyk_uvs.log on Tue Jun 26 22:23:12 2007 obs J0639-3346_S_2002_01_31_yyk_uva.fits ! Reading UV FITS file: J0639-3346_S_2002_01_31_yyk_uva.fits ! AN table 1: 72 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.751235 visibilities/baseline/integration-bin. ! Found source: J0639-3346 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22947e+09 8e+06 1 8e+06 ! 02 2 2.25947e+09 8e+06 1 8e+06 ! 03 3 2.34947e+09 8e+06 1 8e+06 ! 04 4 2.36947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1224 lines of history. ! ! Reading 9736 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0639-3346_S_2002_01_31_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.39462 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.259 mas, bmaj=6.229 mas, bpa=-0.2592 degrees ! Estimated noise=2110.35 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.265946 Jy ! Component: 100 - total flux cleaned = 0.32433 Jy ! Total flux subtracted in 100 components = 0.32433 Jy ! Clean residual min=-0.014436 max=0.025722 Jy/beam ! Clean residual mean=0.000002 rms=0.004452 Jy/beam ! Combined flux in latest and established models = 0.32433 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.32433 Jy ! ! Correcting IF 1. ! A total of 107 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 168 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 98 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 98 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.205729Jy sigma=0.001284 ! Fit after self-cal, rms=0.205612Jy sigma=0.001284 ! Inverting map and beam ! Estimated beam: bmin=2.259 mas, bmaj=6.229 mas, bpa=-0.259 degrees ! Estimated noise=2111.43 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.056 mas, bmaj=7.896 mas, bpa=-1.556 degrees ! Estimated noise=1088.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.5, -7.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0490435 Jy ! Component: 100 - total flux cleaned = 0.0702918 Jy ! Component: 150 - total flux cleaned = 0.0801475 Jy ! Component: 200 - total flux cleaned = 0.0819863 Jy ! Total flux subtracted in 200 components = 0.0819863 Jy ! Clean residual min=-0.008880 max=0.012530 Jy/beam ! Clean residual mean=0.000254 rms=0.002424 Jy/beam ! Combined flux in latest and established models = 0.406316 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 47 model components to the UV plane model. ! The established model now contains 60 components and 0.406316 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.198167Jy sigma=0.001226 ! Fit after self-cal, rms=0.197920Jy sigma=0.001224 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.056 x 7.896 at -1.556 degrees (North through East) ! Clean map min=-0.0082398 max=0.29498 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.985684 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.11 HN 1.00* KP 0.94 ! LA 0.97 MK 0.97 NL 1.13 OV 0.95 ! PT 1.07 SC 1.06 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.980951 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.02 HN 1.00* KP 1.00* ! LA 0.94 MK 1.11 NL 1.21 OV 0.94 ! PT 0.98 SC 1.02 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.97541 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.96 HN 1.00* KP 1.01 ! LA 0.95 MK 0.99 NL 1.22 OV 0.99 ! PT 1.13 SC 1.00 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.0347 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.86 HN 1.00* KP 1.03 ! LA 0.79 MK 0.96 NL 1.22 OV 0.92 ! PT 0.99 SC 0.93 ! ! ! Fit before self-cal, rms=0.197920Jy sigma=0.001224 ! Fit after self-cal, rms=0.193420Jy sigma=0.001193 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193420Jy sigma=0.001193 ! Fit after self-cal, rms=0.193420Jy sigma=0.001193 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.071 mas, bmaj=7.894 mas, bpa=-1.119 degrees ! Estimated noise=1078.33 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0044673 Jy ! Component: 100 - total flux cleaned = -0.00514139 Jy ! Component: 150 - total flux cleaned = -0.00541407 Jy ! Component: 200 - total flux cleaned = -0.00565191 Jy ! Total flux subtracted in 200 components = -0.00565191 Jy ! Clean residual min=-0.004274 max=0.004835 Jy/beam ! Clean residual mean=-0.000061 rms=0.001188 Jy/beam ! Combined flux in latest and established models = 0.400664 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 82 components and 0.400664 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193255Jy sigma=0.001192 ! Fit after self-cal, rms=0.193251Jy sigma=0.001192 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193251Jy sigma=0.001192 ! Fit after self-cal, rms=0.191744Jy sigma=0.001181 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000656701 Jy ! Component: 100 - total flux cleaned = -0.000652451 Jy ! Component: 150 - total flux cleaned = -0.000653811 Jy ! Component: 200 - total flux cleaned = -0.000711269 Jy ! Total flux subtracted in 200 components = -0.000711269 Jy ! Clean residual min=-0.004193 max=0.004600 Jy/beam ! Clean residual mean=-0.000057 rms=0.001158 Jy/beam ! Combined flux in latest and established models = 0.399952 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 98 components and 0.399953 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.191709Jy sigma=0.001181 ! Fit after self-cal, rms=0.191433Jy sigma=0.001179 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.071 x 7.894 at -1.119 degrees (North through East) ! Clean map min=-0.0039391 max=0.29727 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.191433Jy sigma=0.001179 ! Fit after self-cal, rms=0.193676Jy sigma=0.001171 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193676Jy sigma=0.001171 ! Fit after self-cal, rms=0.193610Jy sigma=0.001171 ! Inverting map and beam ! Estimated beam: bmin=3.061 mas, bmaj=7.874 mas, bpa=-1.09 degrees ! Estimated noise=1074.68 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00114274 Jy ! Component: 100 - total flux cleaned = -0.0011973 Jy ! Component: 150 - total flux cleaned = -0.00119796 Jy ! Component: 200 - total flux cleaned = -0.00134035 Jy ! Total flux subtracted in 200 components = -0.00134035 Jy ! Clean residual min=-0.003986 max=0.003586 Jy/beam ! Clean residual mean=-0.000044 rms=0.001058 Jy/beam ! Combined flux in latest and established models = 0.398612 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 105 components and 0.398612 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193572Jy sigma=0.001170 ! Fit after self-cal, rms=0.193560Jy sigma=0.001170 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193560Jy sigma=0.001170 ! Fit after self-cal, rms=0.194447Jy sigma=0.001167 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.194447Jy sigma=0.001167 ! Fit after self-cal, rms=0.194453Jy sigma=0.001167 ! Inverting map and beam ! Estimated beam: bmin=3.057 mas, bmaj=7.871 mas, bpa=-1.095 degrees ! Estimated noise=1074.39 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000532275 Jy ! Component: 100 - total flux cleaned = -0.000525974 Jy ! Component: 150 - total flux cleaned = -0.000568568 Jy ! Component: 200 - total flux cleaned = -0.000650475 Jy ! Total flux subtracted in 200 components = -0.000650475 Jy ! Clean residual min=-0.003942 max=0.003548 Jy/beam ! Clean residual mean=-0.000046 rms=0.001040 Jy/beam ! Combined flux in latest and established models = 0.397962 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 112 components and 0.397962 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.194428Jy sigma=0.001167 ! Fit after self-cal, rms=0.194440Jy sigma=0.001167 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.269 mas, bmaj=26.29 mas, bpa=4.624 degrees ! Estimated noise=1384.07 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000336483 Jy ! Component: 100 - total flux cleaned = -0.000360397 Jy ! Component: 150 - total flux cleaned = -0.000439098 Jy ! Component: 200 - total flux cleaned = -0.000511106 Jy ! Total flux subtracted in 200 components = -0.000511106 Jy ! Clean residual min=-0.003628 max=0.003465 Jy/beam ! Clean residual mean=-0.000080 rms=0.001331 Jy/beam ! Combined flux in latest and established models = 0.397451 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 129 components and 0.397451 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.194436Jy sigma=0.001167 ! Fit after self-cal, rms=0.194441Jy sigma=0.001167 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.261 mas, bmaj=6.208 mas, bpa=0.1642 degrees ! Estimated noise=2114.21 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.26788 Jy ! Component: 100 - total flux cleaned = 0.325951 Jy ! Component: 150 - total flux cleaned = 0.352996 Jy ! Component: 200 - total flux cleaned = 0.368174 Jy ! Total flux subtracted in 200 components = 0.368174 Jy ! Clean residual min=-0.007718 max=0.010659 Jy/beam ! Clean residual mean=-0.000026 rms=0.002273 Jy/beam ! Combined flux in latest and established models = 0.368174 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 0.368174 Jy ! Inverting map and beam ! Estimated beam: bmin=3.057 mas, bmaj=7.871 mas, bpa=-1.095 degrees ! Estimated noise=1074.39 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1, 7). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0178099 Jy ! Component: 100 - total flux cleaned = 0.025209 Jy ! Component: 150 - total flux cleaned = 0.0286697 Jy ! Component: 200 - total flux cleaned = 0.0298079 Jy ! Total flux subtracted in 200 components = 0.0298079 Jy ! Clean residual min=-0.004040 max=0.003091 Jy/beam ! Clean residual mean=-0.000050 rms=0.000991 Jy/beam ! Combined flux in latest and established models = 0.397982 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 79 components and 0.397982 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.269 mas, bmaj=26.29 mas, bpa=4.624 degrees ! Estimated noise=1384.07 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000701148 Jy ! Component: 100 - total flux cleaned = 0.000764255 Jy ! Component: 150 - total flux cleaned = 0.000738243 Jy ! Component: 200 - total flux cleaned = 0.000738072 Jy ! Total flux subtracted in 200 components = 0.000738072 Jy ! Clean residual min=-0.003844 max=0.003538 Jy/beam ! Clean residual mean=-0.000097 rms=0.001306 Jy/beam ! Combined flux in latest and established models = 0.39872 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 101 components and 0.39872 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.057 mas, bmaj=7.871 mas, bpa=-1.095 degrees ! Estimated noise=1074.39 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000143898 Jy ! Component: 100 - total flux cleaned = -9.28236e-05 Jy ! Component: 150 - total flux cleaned = -4.67619e-05 Jy ! Component: 200 - total flux cleaned = 3.57893e-05 Jy ! Total flux subtracted in 200 components = 3.57893e-05 Jy ! Clean residual min=-0.003994 max=0.003150 Jy/beam ! Clean residual mean=-0.000052 rms=0.000976 Jy/beam ! Combined flux in latest and established models = 0.398756 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 112 components and 0.398756 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.194331Jy sigma=0.001167 ! Fit after self-cal, rms=0.194325Jy sigma=0.001167 wmodel J0639-3346_S_2002_01_31_yyk\_map.mod ! Writing 112 model components to file: J0639-3346_S_2002_01_31_yyk_map.mod wobs J0639-3346_S_2002_01_31_yyk\_uvs.fits ! Writing UV FITS file: J0639-3346_S_2002_01_31_yyk_uvs.fits wwins J0639-3346_S_2002_01_31_yyk\_map.win ! wwins: Wrote 3 windows to J0639-3346_S_2002_01_31_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00160758 Jy ! Component: 100 - total flux cleaned = -0.00250734 Jy ! Component: 150 - total flux cleaned = -0.00295388 Jy ! Component: 200 - total flux cleaned = -0.00326604 Jy ! Component: 250 - total flux cleaned = -0.00366382 Jy ! Component: 300 - total flux cleaned = -0.00409102 Jy ! Component: 350 - total flux cleaned = -0.00454719 Jy ! Component: 400 - total flux cleaned = -0.00503139 Jy ! Component: 450 - total flux cleaned = -0.00567081 Jy ! Component: 500 - total flux cleaned = -0.00620851 Jy ! Component: 550 - total flux cleaned = -0.00673122 Jy ! Component: 600 - total flux cleaned = -0.0071621 Jy ! Component: 650 - total flux cleaned = -0.00765814 Jy ! Component: 700 - total flux cleaned = -0.00806828 Jy ! Component: 750 - total flux cleaned = -0.00839693 Jy ! Component: 800 - total flux cleaned = -0.00871832 Jy ! Component: 850 - total flux cleaned = -0.00889357 Jy ! Component: 900 - total flux cleaned = -0.00906585 Jy ! Component: 950 - total flux cleaned = -0.00930281 Jy ! Component: 1000 - total flux cleaned = -0.00950187 Jy ! Component: 1050 - total flux cleaned = -0.00969753 Jy ! Component: 1100 - total flux cleaned = -0.00985761 Jy ! Component: 1150 - total flux cleaned = -0.00998347 Jy ! Component: 1200 - total flux cleaned = -0.0100452 Jy ! Component: 1250 - total flux cleaned = -0.0102598 Jy ! Component: 1300 - total flux cleaned = -0.010411 Jy ! Component: 1350 - total flux cleaned = -0.0105899 Jy ! Component: 1400 - total flux cleaned = -0.0107372 Jy ! Component: 1450 - total flux cleaned = -0.0108538 Jy ! Component: 1500 - total flux cleaned = -0.0110547 Jy ! Component: 1550 - total flux cleaned = -0.0112245 Jy ! Component: 1600 - total flux cleaned = -0.0113088 Jy ! Component: 1650 - total flux cleaned = -0.0114746 Jy ! Component: 1700 - total flux cleaned = -0.0116385 Jy ! Component: 1750 - total flux cleaned = -0.0118007 Jy ! Component: 1800 - total flux cleaned = -0.011934 Jy ! Component: 1850 - total flux cleaned = -0.0120921 Jy ! Component: 1900 - total flux cleaned = -0.0121704 Jy ! Component: 1950 - total flux cleaned = -0.0123772 Jy ! Component: 2000 - total flux cleaned = -0.0124537 Jy ! Total flux subtracted in 2048 components = -0.0125549 Jy ! Clean residual min=-0.001782 max=0.001641 Jy/beam ! Clean residual mean=-0.000055 rms=0.000501 Jy/beam ! Combined flux in latest and established models = 0.386201 Jy keep ! Adding 114 model components to the UV plane model. ! The established model now contains 226 components and 0.386201 Jy ![Exited script file: muppet] wmap "J0639-3346_S_2002_01_31_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.057 x 7.871 at -1.095 degrees (North through East) ! Clean map min=-0.0030947 max=0.30269 Jy/beam ! Writing clean map to FITS file: J0639-3346_S_2002_01_31_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.302689 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000492578 device "J0639-3346_S_2002_01_31_yyk\_map.eps/VPS" ! Attempting to open device: 'J0639-3346_S_2002_01_31_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.488201 0.488201 0.976403 1.95281 3.90561 7.81122 15.6224 31.2449 62.4898 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.302 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.057 x 7.871 at -1.095 degrees (North through East) ! Clean map min=-0.0030947 max=0.30269 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0639-3346_S_2002_01_31_yyk\_map.gif/gif" ! Attempting to open device: 'J0639-3346_S_2002_01_31_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0639-3346_S_2002_01_31_yyk_uvs.log closed on Tue Jun 26 22:23:19 2007