! Started logfile: J0637-3536_S_2002_01_31_yyk_uvs.log on Tue Jun 26 22:22:50 2007 obs J0637-3536_S_2002_01_31_yyk_uva.fits ! Reading UV FITS file: J0637-3536_S_2002_01_31_yyk_uva.fits ! AN table 1: 38 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.198246 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0637-3536 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22947e+09 8e+06 1 8e+06 ! 02 2 2.25947e+09 8e+06 1 8e+06 ! 03 3 2.34947e+09 8e+06 1 8e+06 ! 04 4 2.36947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1225 lines of history. ! ! Reading 1356 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0637-3536_S_2002_01_31_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.234616 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.874 mas, bmaj=41.84 mas, bpa=26.37 degrees ! Estimated noise=4479.79 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0417256 Jy ! Component: 100 - total flux cleaned = 0.0579122 Jy ! Total flux subtracted in 100 components = 0.0579122 Jy ! Clean residual min=-0.013296 max=0.013537 Jy/beam ! Clean residual mean=0.001492 rms=0.004988 Jy/beam ! Combined flux in latest and established models = 0.0579121 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 41 model components to the UV plane model. ! The established model now contains 41 components and 0.0579121 Jy ! ! Correcting IF 1. ! A total of 380 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 203 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 380 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 203 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.225652Jy sigma=0.001426 ! Fit after self-cal, rms=0.225348Jy sigma=0.001422 ! Inverting map and beam ! Estimated beam: bmin=2.874 mas, bmaj=41.84 mas, bpa=26.37 degrees ! Estimated noise=4487.55 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.496 mas, bmaj=41.56 mas, bpa=25.99 degrees ! Estimated noise=3977.72 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0264746 Jy ! Component: 100 - total flux cleaned = 0.033531 Jy ! Component: 150 - total flux cleaned = 0.0354464 Jy ! Component: 200 - total flux cleaned = 0.0331285 Jy ! Total flux subtracted in 200 components = 0.0331285 Jy ! Clean residual min=-0.009938 max=0.010601 Jy/beam ! Clean residual mean=0.000642 rms=0.002737 Jy/beam ! Combined flux in latest and established models = 0.0910406 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 50 model components to the UV plane model. ! The established model now contains 84 components and 0.0910406 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.222471Jy sigma=0.001399 ! Fit after self-cal, rms=0.222355Jy sigma=0.001399 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.496 x 41.56 at 25.99 degrees (North through East) ! Clean map min=-0.014998 max=0.038658 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.222355Jy sigma=0.001399 ! Fit after self-cal, rms=0.222355Jy sigma=0.001399 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.222355Jy sigma=0.001399 ! Fit after self-cal, rms=0.222355Jy sigma=0.001399 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.496 mas, bmaj=41.56 mas, bpa=25.99 degrees ! Estimated noise=3977.72 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00255228 Jy ! Component: 100 - total flux cleaned = 0.00692334 Jy ! Component: 150 - total flux cleaned = 0.00896622 Jy ! Component: 200 - total flux cleaned = 0.0106571 Jy ! Total flux subtracted in 200 components = 0.0106571 Jy ! Clean residual min=-0.003172 max=0.003309 Jy/beam ! Clean residual mean=-0.000052 rms=0.000992 Jy/beam ! Combined flux in latest and established models = 0.101698 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 42 model components to the UV plane model. ! The established model now contains 121 components and 0.101698 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.221968Jy sigma=0.001396 ! Fit after self-cal, rms=0.221942Jy sigma=0.001396 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.221942Jy sigma=0.001396 ! Fit after self-cal, rms=0.220223Jy sigma=0.001386 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00257856 Jy ! Component: 100 - total flux cleaned = 0.000795815 Jy ! Component: 150 - total flux cleaned = -0.000275689 Jy ! Component: 200 - total flux cleaned = -0.00209476 Jy ! Total flux subtracted in 200 components = -0.00209476 Jy ! Clean residual min=-0.004726 max=0.004700 Jy/beam ! Clean residual mean=-0.000170 rms=0.001582 Jy/beam ! Combined flux in latest and established models = 0.099603 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 35 model components to the UV plane model. ! The established model now contains 154 components and 0.099603 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.219443Jy sigma=0.001380 ! Fit after self-cal, rms=0.218458Jy sigma=0.001375 ! Inverting map ! Added new window around map position (53, 5.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00519135 Jy ! Component: 100 - total flux cleaned = 0.00589283 Jy ! Component: 150 - total flux cleaned = 0.00570337 Jy ! Component: 200 - total flux cleaned = 0.00587466 Jy ! Total flux subtracted in 200 components = 0.00587466 Jy ! Clean residual min=-0.005065 max=0.006712 Jy/beam ! Clean residual mean=-0.000111 rms=0.001858 Jy/beam ! Combined flux in latest and established models = 0.105478 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 187 components and 0.105478 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.218061Jy sigma=0.001372 ! Fit after self-cal, rms=0.217482Jy sigma=0.001370 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.496 x 41.56 at 25.99 degrees (North through East) ! Clean map min=-0.023216 max=0.040782 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=10.06 mas, bmaj=57.21 mas, bpa=15.76 degrees ! Estimated noise=4743.99 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00316349 Jy ! Component: 100 - total flux cleaned = 0.00392149 Jy ! Component: 150 - total flux cleaned = 0.00393911 Jy ! Component: 200 - total flux cleaned = 0.00409214 Jy ! Total flux subtracted in 200 components = 0.00409214 Jy ! Clean residual min=-0.003651 max=0.004472 Jy/beam ! Clean residual mean=-0.000094 rms=0.001360 Jy/beam ! Combined flux in latest and established models = 0.10957 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 211 components and 0.10957 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.217439Jy sigma=0.001369 ! Fit after self-cal, rms=0.217225Jy sigma=0.001368 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.874 mas, bmaj=41.84 mas, bpa=26.37 degrees ! Estimated noise=4487.55 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0210087 Jy ! Component: 100 - total flux cleaned = 0.0260202 Jy ! Component: 150 - total flux cleaned = 0.0271059 Jy ! Component: 200 - total flux cleaned = 0.022948 Jy ! Total flux subtracted in 200 components = 0.022948 Jy ! Clean residual min=-0.021574 max=0.030166 Jy/beam ! Clean residual mean=0.001774 rms=0.008021 Jy/beam ! Combined flux in latest and established models = 0.022948 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 50 model components to the UV plane model. ! The established model now contains 50 components and 0.022948 Jy ! Inverting map and beam ! Estimated beam: bmin=3.496 mas, bmaj=41.56 mas, bpa=25.99 degrees ! Estimated noise=3977.72 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00449703 Jy ! Component: 100 - total flux cleaned = -0.00702888 Jy ! Component: 150 - total flux cleaned = -0.00870064 Jy ! Component: 200 - total flux cleaned = -0.0107388 Jy ! Total flux subtracted in 200 components = -0.0107388 Jy ! Clean residual min=-0.020668 max=0.032425 Jy/beam ! Clean residual mean=0.001795 rms=0.008378 Jy/beam ! Combined flux in latest and established models = 0.0122092 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 73 components and 0.0122092 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=10.06 mas, bmaj=57.21 mas, bpa=15.76 degrees ! Estimated noise=4743.99 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00252611 Jy ! Component: 100 - total flux cleaned = -0.00394431 Jy ! Component: 150 - total flux cleaned = -0.00353192 Jy ! Component: 200 - total flux cleaned = -0.00314566 Jy ! Total flux subtracted in 200 components = -0.00314566 Jy ! Clean residual min=-0.024308 max=0.036236 Jy/beam ! Clean residual mean=0.001590 rms=0.010675 Jy/beam ! Combined flux in latest and established models = 0.00906357 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 125 components and 0.00906357 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.496 mas, bmaj=41.56 mas, bpa=25.99 degrees ! Estimated noise=3977.72 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00228544 Jy ! Component: 100 - total flux cleaned = 0.00508691 Jy ! Component: 150 - total flux cleaned = 0.00668632 Jy ! Component: 200 - total flux cleaned = 0.00788198 Jy ! Total flux subtracted in 200 components = 0.00788198 Jy ! Clean residual min=-0.018384 max=0.025179 Jy/beam ! Clean residual mean=0.000660 rms=0.006997 Jy/beam ! Combined flux in latest and established models = 0.0169456 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 146 components and 0.0169456 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.219693Jy sigma=0.001386 ! Fit after self-cal, rms=0.218771Jy sigma=0.001380 wmodel J0637-3536_S_2002_01_31_yyk\_map.mod ! Writing 146 model components to file: J0637-3536_S_2002_01_31_yyk_map.mod wobs J0637-3536_S_2002_01_31_yyk\_uvs.fits ! Writing UV FITS file: J0637-3536_S_2002_01_31_yyk_uvs.fits wwins J0637-3536_S_2002_01_31_yyk\_map.win ! wwins: Wrote 1 windows to J0637-3536_S_2002_01_31_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00127546 Jy ! Component: 100 - total flux cleaned = 0.0013721 Jy ! Component: 150 - total flux cleaned = -0.00060526 Jy ! Component: 200 - total flux cleaned = -0.00130643 Jy ! Component: 250 - total flux cleaned = -0.00129939 Jy ! Component: 300 - total flux cleaned = -0.00102318 Jy ! Component: 350 - total flux cleaned = -0.000490848 Jy ! Component: 400 - total flux cleaned = -0.000106593 Jy ! Component: 450 - total flux cleaned = 1.75121e-05 Jy ! Component: 500 - total flux cleaned = 0.000137253 Jy ! Component: 550 - total flux cleaned = 1.54586e-05 Jy ! Component: 600 - total flux cleaned = 1.70093e-05 Jy ! Component: 650 - total flux cleaned = 0.00013898 Jy ! Component: 700 - total flux cleaned = 0.000386415 Jy ! Component: 750 - total flux cleaned = 0.000633658 Jy ! Component: 800 - total flux cleaned = 0.000633296 Jy ! Component: 850 - total flux cleaned = -1.51336e-05 Jy ! Component: 900 - total flux cleaned = -0.00068619 Jy ! Component: 950 - total flux cleaned = -0.00123983 Jy ! Component: 1000 - total flux cleaned = -0.00195409 Jy ! Component: 1050 - total flux cleaned = -0.00254583 Jy ! Component: 1100 - total flux cleaned = -0.00315856 Jy ! Component: 1150 - total flux cleaned = -0.00347655 Jy ! Component: 1200 - total flux cleaned = -0.00380552 Jy ! Component: 1250 - total flux cleaned = -0.00414528 Jy ! Component: 1300 - total flux cleaned = -0.00450334 Jy ! Component: 1350 - total flux cleaned = -0.00468845 Jy ! Component: 1400 - total flux cleaned = -0.00506971 Jy ! Component: 1450 - total flux cleaned = -0.00547022 Jy ! Component: 1500 - total flux cleaned = -0.00567859 Jy ! Component: 1550 - total flux cleaned = -0.0061119 Jy ! Component: 1600 - total flux cleaned = -0.00633974 Jy ! Component: 1650 - total flux cleaned = -0.00657302 Jy ! Component: 1700 - total flux cleaned = -0.00707616 Jy ! Component: 1750 - total flux cleaned = -0.0073419 Jy ! Component: 1800 - total flux cleaned = -0.00761035 Jy ! Component: 1850 - total flux cleaned = -0.00818243 Jy ! Component: 1900 - total flux cleaned = -0.00847519 Jy ! Component: 1950 - total flux cleaned = -0.00909824 Jy ! Component: 2000 - total flux cleaned = -0.00943917 Jy ! Total flux subtracted in 2048 components = -0.0097842 Jy ! Clean residual min=-0.021184 max=0.019737 Jy/beam ! Clean residual mean=-0.000862 rms=0.005030 Jy/beam ! Combined flux in latest and established models = 0.00716137 Jy keep ! Adding 74 model components to the UV plane model. ! The established model now contains 220 components and 0.00716136 Jy ![Exited script file: muppet] wmap "J0637-3536_S_2002_01_31_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.496 x 41.56 at 25.99 degrees (North through East) ! Clean map min=-0.031439 max=0.053242 Jy/beam ! Writing clean map to FITS file: J0637-3536_S_2002_01_31_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.053242 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00458914 device "J0637-3536_S_2002_01_31_yyk\_map.eps/VPS" ! Attempting to open device: 'J0637-3536_S_2002_01_31_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -25.8582 25.8582 51.7165 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0137 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.053 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.496 x 41.56 at 25.99 degrees (North through East) ! Clean map min=-0.031439 max=0.053242 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0637-3536_S_2002_01_31_yyk\_map.gif/gif" ! Attempting to open device: 'J0637-3536_S_2002_01_31_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0637-3536_S_2002_01_31_yyk_uvs.log closed on Tue Jun 26 22:22:58 2007