! Started logfile: J0631-4154_X_2002_05_14_yyk_uvs.log on Tue Jun 26 22:22:45 2007
obs J0631-4154_X_2002_05_14_yyk_uva.fits
! Reading UV FITS file: J0631-4154_X_2002_05_14_yyk_uva.fits
! AN table 1: 39 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.287179 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J0631-4154
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40947e+09        8e+06          1        8e+06
!  02        2  8.47947e+09        8e+06          1        8e+06
!  03        3  8.79447e+09        8e+06          1        8e+06
!  04        4  8.89947e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 1076 lines of history.
! 
! Reading 2016 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J0631-4154_X_2002_05_14_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.425792 Jy 
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6814 mas, bmaj=7.379 mas, bpa=27.39 degrees
! Estimated noise=5853.07 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.287343 Jy
! Component: 100  -  total flux cleaned = 0.352876 Jy
! Total flux subtracted in 100 components = 0.352876 Jy
! Clean residual min=-0.030578 max=0.031572 Jy/beam
! Clean residual mean=-0.000451 rms=0.011694 Jy/beam
! Combined flux in latest and established models = 0.352876 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 28 model components to the UV plane model.
! The established model now contains 28 components and 0.352876 Jy
! 
! Correcting IF 1.
!  A total of 173 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 173 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 173 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 173 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.255664Jy  sigma=0.001401
! Fit after  self-cal, rms=0.255174Jy  sigma=0.001398
! Inverting map and beam 
! Estimated beam: bmin=0.6814 mas, bmaj=7.379 mas, bpa=27.39 degrees
! Estimated noise=5853.07 mJy/beam.
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9115 mas, bmaj=7.264 mas, bpa=26.65 degrees
! Estimated noise=2762.8 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0855413 Jy
! Component: 100  -  total flux cleaned = 0.10628 Jy
! Component: 150  -  total flux cleaned = 0.109071 Jy
! Component: 200  -  total flux cleaned = 0.102491 Jy
! Total flux subtracted in 200 components = 0.102491 Jy
! Clean residual min=-0.010406 max=0.010149 Jy/beam
! Clean residual mean=-0.000264 rms=0.004722 Jy/beam
! Combined flux in latest and established models = 0.455367 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 82 model components to the UV plane model.
! The established model now contains 109 components and 0.455367 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.235975Jy  sigma=0.001261
! Fit after  self-cal, rms=0.235932Jy  sigma=0.001261
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9115 x 7.264 at 26.65 degrees (North through East)
! Clean map  min=-0.016326  max=0.2536 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.980273
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.02     HN        1.00*    KP        0.98     
!   LA        1.01     NL        1.28     OV        0.93     PT        1.00*    
!   SC        0.99     MK        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.01773
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.99     HN        1.00*    KP        0.89     
!   LA        0.95     NL        0.97     OV        0.97     PT        1.00*    
!   SC        1.05     MK        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.994313
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.95     HN        1.00*    KP        0.88     
!   LA        1.00     NL        1.12     OV        1.06     PT        1.00*    
!   SC        1.05     MK        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.934548
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.94     HN        1.00*    KP        1.04     
!   LA        0.94     NL        1.68     OV        1.07     PT        1.00*    
!   SC        1.03     MK        1.00*    
! 
! 
! Fit before self-cal, rms=0.235932Jy  sigma=0.001261
! Fit after  self-cal, rms=0.253110Jy  sigma=0.001253
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.253110Jy  sigma=0.001253
! Fit after  self-cal, rms=0.253116Jy  sigma=0.001253
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9197 mas, bmaj=7.847 mas, bpa=26.68 degrees
! Estimated noise=2686.77 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.012072 Jy
! Component: 100  -  total flux cleaned = -0.0125928 Jy
! Component: 150  -  total flux cleaned = -0.0136312 Jy
! Component: 200  -  total flux cleaned = -0.0150239 Jy
! Total flux subtracted in 200 components = -0.0150239 Jy
! Clean residual min=-0.003368 max=0.003337 Jy/beam
! Clean residual mean=-0.000021 rms=0.001321 Jy/beam
! Combined flux in latest and established models = 0.440343 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 59 model components to the UV plane model.
! The established model now contains 166 components and 0.440343 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.251827Jy  sigma=0.001245
! Fit after  self-cal, rms=0.251815Jy  sigma=0.001245
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.251815Jy  sigma=0.001245
! Fit after  self-cal, rms=0.246932Jy  sigma=0.001209
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00130617 Jy
! Component: 100  -  total flux cleaned = -0.00175305 Jy
! Component: 150  -  total flux cleaned = -0.00175219 Jy
! Component: 200  -  total flux cleaned = -0.00252073 Jy
! Total flux subtracted in 200 components = -0.00252073 Jy
! Clean residual min=-0.002306 max=0.002327 Jy/beam
! Clean residual mean=-0.000024 rms=0.000982 Jy/beam
! Combined flux in latest and established models = 0.437822 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 54 model components to the UV plane model.
! The established model now contains 219 components and 0.437822 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.246558Jy  sigma=0.001208
! Fit after  self-cal, rms=0.245974Jy  sigma=0.001204
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9197 x 7.847 at 26.68 degrees (North through East)
! Clean map  min=-0.010642  max=0.24849 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.245974Jy  sigma=0.001204
! Fit after  self-cal, rms=0.248693Jy  sigma=0.001199
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.248693Jy  sigma=0.001199
! Fit after  self-cal, rms=0.248593Jy  sigma=0.001198
! Inverting map and beam 
! Estimated beam: bmin=0.9204 mas, bmaj=7.899 mas, bpa=26.69 degrees
! Estimated noise=2680.18 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.0023137 Jy
! Component: 100  -  total flux cleaned = -0.0016554 Jy
! Component: 150  -  total flux cleaned = -0.000899358 Jy
! Component: 200  -  total flux cleaned = -0.000324238 Jy
! Total flux subtracted in 200 components = -0.000324238 Jy
! Clean residual min=-0.001746 max=0.001745 Jy/beam
! Clean residual mean=-0.000023 rms=0.000729 Jy/beam
! Combined flux in latest and established models = 0.437498 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 44 model components to the UV plane model.
! The established model now contains 263 components and 0.437498 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.248374Jy  sigma=0.001197
! Fit after  self-cal, rms=0.248350Jy  sigma=0.001197
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.248350Jy  sigma=0.001197
! Fit after  self-cal, rms=0.264186Jy  sigma=0.001189
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.264186Jy  sigma=0.001189
! Fit after  self-cal, rms=0.264214Jy  sigma=0.001189
! Inverting map and beam 
! Estimated beam: bmin=0.9203 mas, bmaj=7.933 mas, bpa=26.66 degrees
! Estimated noise=2684.27 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000692235 Jy
! Component: 100  -  total flux cleaned = -0.00150388 Jy
! Component: 150  -  total flux cleaned = -0.00187288 Jy
! Component: 200  -  total flux cleaned = -0.00210942 Jy
! Total flux subtracted in 200 components = -0.00210942 Jy
! Clean residual min=-0.001409 max=0.001413 Jy/beam
! Clean residual mean=-0.000025 rms=0.000576 Jy/beam
! Combined flux in latest and established models = 0.435389 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 54 model components to the UV plane model.
! The established model now contains 311 components and 0.435389 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.264073Jy  sigma=0.001189
! Fit after  self-cal, rms=0.264078Jy  sigma=0.001189
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.496 mas, bmaj=13.82 mas, bpa=12.37 degrees
! Estimated noise=3250.91 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 7.85843e-05 Jy
! Component: 100  -  total flux cleaned = -1.1453e-05 Jy
! Component: 150  -  total flux cleaned = 6.14265e-05 Jy
! Component: 200  -  total flux cleaned = 0.000204578 Jy
! Total flux subtracted in 200 components = 0.000204578 Jy
! Clean residual min=-0.000887 max=0.000891 Jy/beam
! Clean residual mean=-0.000023 rms=0.000412 Jy/beam
! Combined flux in latest and established models = 0.435593 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 42 model components to the UV plane model.
! The established model now contains 351 components and 0.435593 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.264006Jy  sigma=0.001189
! Fit after  self-cal, rms=0.264001Jy  sigma=0.001189
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6736 mas, bmaj=7.823 mas, bpa=27.4 degrees
! Estimated noise=5845.42 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.282239 Jy
! Component: 100  -  total flux cleaned = 0.339237 Jy
! Component: 150  -  total flux cleaned = 0.357686 Jy
! Component: 200  -  total flux cleaned = 0.36544 Jy
! Total flux subtracted in 200 components = 0.36544 Jy
! Clean residual min=-0.013598 max=0.013627 Jy/beam
! Clean residual mean=-0.000265 rms=0.005563 Jy/beam
! Combined flux in latest and established models = 0.36544 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 61 model components to the UV plane model.
! The established model now contains 61 components and 0.36544 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9203 mas, bmaj=7.933 mas, bpa=26.66 degrees
! Estimated noise=2684.27 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0285954 Jy
! Component: 100  -  total flux cleaned = 0.0391279 Jy
! Component: 150  -  total flux cleaned = 0.0419206 Jy
! Component: 200  -  total flux cleaned = 0.0430931 Jy
! Total flux subtracted in 200 components = 0.0430931 Jy
! Clean residual min=-0.006388 max=0.006293 Jy/beam
! Clean residual mean=-0.000133 rms=0.002823 Jy/beam
! Combined flux in latest and established models = 0.408533 Jy
! Adding 78 model components to the UV plane model.
! The established model now contains 137 components and 0.408533 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.496 mas, bmaj=13.82 mas, bpa=12.37 degrees
! Estimated noise=3250.91 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00408444 Jy
! Component: 100  -  total flux cleaned = -0.0080567 Jy
! Component: 150  -  total flux cleaned = -0.00723606 Jy
! Component: 200  -  total flux cleaned = -0.00643803 Jy
! Total flux subtracted in 200 components = -0.00643803 Jy
! Clean residual min=-0.003332 max=0.003265 Jy/beam
! Clean residual mean=-0.000097 rms=0.001417 Jy/beam
! Combined flux in latest and established models = 0.402095 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 178 components and 0.402095 Jy
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9203 mas, bmaj=7.933 mas, bpa=26.66 degrees
! Estimated noise=2684.27 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000261196 Jy
! Component: 100  -  total flux cleaned = 0.00053144 Jy
! Component: 150  -  total flux cleaned = 0.00125654 Jy
! Component: 200  -  total flux cleaned = 0.00174845 Jy
! Total flux subtracted in 200 components = 0.00174845 Jy
! Clean residual min=-0.001936 max=0.001947 Jy/beam
! Clean residual mean=-0.000026 rms=0.000818 Jy/beam
! Combined flux in latest and established models = 0.403844 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 57 model components to the UV plane model.
! The established model now contains 233 components and 0.403844 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.264642Jy  sigma=0.001191
! Fit after  self-cal, rms=0.264633Jy  sigma=0.001190
wmodel J0631-4154_X_2002_05_14_yyk\_map.mod
! Writing 233 model components to file: J0631-4154_X_2002_05_14_yyk_map.mod
wobs J0631-4154_X_2002_05_14_yyk\_uvs.fits
! Writing UV FITS file: J0631-4154_X_2002_05_14_yyk_uvs.fits
wwins J0631-4154_X_2002_05_14_yyk\_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: muppet]
! 
wmap "J0631-4154_X_2002_05_14_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9203 x 7.933 at 26.66 degrees (North through East)
! Clean map  min=-0.011452  max=0.25234 Jy/beam
! Writing clean map to FITS file: J0631-4154_X_2002_05_14_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.252341 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000821977 
device "J0631-4154_X_2002_05_14_yyk\_map.eps/VPS"
! Attempting to open device: 'J0631-4154_X_2002_05_14_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.977221 0.977221 1.95444 3.90888 7.81777 15.6355 31.2711 62.5421
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0024 
print "peak=",int(peak_flux*1000)/1000
! peak= 0.252 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9203 x 7.933 at 26.66 degrees (North through East)
! Clean map  min=-0.011452  max=0.25234 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J0631-4154_X_2002_05_14_yyk\_map.gif/gif"
! Attempting to open device: 'J0631-4154_X_2002_05_14_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J0631-4154_X_2002_05_14_yyk_uvs.log closed on Tue Jun 26 22:22:50 2007