! Started logfile: J0631-4154_X_2002_01_31_yyk_uvs.log on Wed Jun 27 10:50:13 2007 obs J0631-4154_X_2002_01_31_yyk_uva.fits ! Reading UV FITS file: J0631-4154_X_2002_01_31_yyk_uva.fits ! AN table 1: 34 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.613725 visibilities/baseline/integration-bin. ! Found source: J0631-4154 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40947e+09 8e+06 1 8e+06 ! 02 2 8.47947e+09 8e+06 1 8e+06 ! 03 3 8.79447e+09 8e+06 1 8e+06 ! 04 4 8.89947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1544 lines of history. ! ! Reading 3756 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 flag NL ! Flagging baselines of antenna 1:NL in the currently selected channels. ![@muppet J0631-4154_X_2002_01_31_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.370621 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.5616 mas, bmaj=1.782 mas, bpa=5.093 degrees ! Estimated noise=3838.29 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.27248 Jy ! Component: 100 - total flux cleaned = 0.32943 Jy ! Total flux subtracted in 100 components = 0.32943 Jy ! Clean residual min=-0.014015 max=0.015512 Jy/beam ! Clean residual mean=0.000002 rms=0.004521 Jy/beam ! Combined flux in latest and established models = 0.32943 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.32943 Jy ! ! Correcting IF 1. ! A total of 104 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 104 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 104 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 104 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.170643Jy sigma=0.001267 ! Fit after self-cal, rms=0.170447Jy sigma=0.001265 ! Inverting map and beam ! Estimated beam: bmin=0.5616 mas, bmaj=1.782 mas, bpa=5.093 degrees ! Estimated noise=3838.29 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7753 mas, bmaj=2.143 mas, bpa=3.889 degrees ! Estimated noise=1717.05 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0259242 Jy ! Component: 100 - total flux cleaned = 0.0336674 Jy ! Component: 150 - total flux cleaned = 0.0357844 Jy ! Component: 200 - total flux cleaned = 0.0359995 Jy ! Total flux subtracted in 200 components = 0.0359995 Jy ! Clean residual min=-0.013994 max=0.018896 Jy/beam ! Clean residual mean=0.000113 rms=0.004158 Jy/beam ! Combined flux in latest and established models = 0.36543 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 22 components and 0.36543 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168078Jy sigma=0.001245 ! Fit after self-cal, rms=0.168042Jy sigma=0.001245 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7753 x 2.143 at 3.889 degrees (North through East) ! Clean map min=-0.012288 max=0.32708 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.999587 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.00* KP 1.03 ! LA 1.10 MK 0.99 NL 1.00* OV 0.99 ! PT 0.93 SC 1.00 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.01356 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 1.00* KP 0.97 ! LA 1.04 MK 0.93 NL 1.00* OV 0.98 ! PT 1.03 SC 0.96 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.989971 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.90 HN 1.00* KP 0.96 ! LA 1.05 MK 1.06 NL 1.00* OV 1.00 ! PT 1.06 SC 1.07 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.995438 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.88 HN 1.00* KP 1.02 ! LA 1.04 MK 1.03 NL 1.00* OV 1.01 ! PT 1.10 SC 0.97 ! ! ! Fit before self-cal, rms=0.168042Jy sigma=0.001245 ! Fit after self-cal, rms=0.165476Jy sigma=0.001231 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165476Jy sigma=0.001231 ! Fit after self-cal, rms=0.165474Jy sigma=0.001231 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.773 mas, bmaj=2.146 mas, bpa=3.891 degrees ! Estimated noise=1711.88 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2, 4.2). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.018341 Jy ! Component: 100 - total flux cleaned = 0.0196739 Jy ! Component: 150 - total flux cleaned = 0.0198293 Jy ! Component: 200 - total flux cleaned = 0.0198206 Jy ! Total flux subtracted in 200 components = 0.0198206 Jy ! Clean residual min=-0.006512 max=0.006455 Jy/beam ! Clean residual mean=0.000012 rms=0.002072 Jy/beam ! Combined flux in latest and established models = 0.385251 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 39 components and 0.385251 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164086Jy sigma=0.001219 ! Fit after self-cal, rms=0.164067Jy sigma=0.001219 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164067Jy sigma=0.001219 ! Fit after self-cal, rms=0.160063Jy sigma=0.001192 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00155826 Jy ! Component: 100 - total flux cleaned = 0.00171074 Jy ! Component: 150 - total flux cleaned = 0.00170672 Jy ! Component: 200 - total flux cleaned = 0.00161795 Jy ! Total flux subtracted in 200 components = 0.00161795 Jy ! Clean residual min=-0.006121 max=0.006681 Jy/beam ! Clean residual mean=0.000013 rms=0.001986 Jy/beam ! Combined flux in latest and established models = 0.386869 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 47 components and 0.386869 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159935Jy sigma=0.001191 ! Fit after self-cal, rms=0.159155Jy sigma=0.001186 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.773 x 2.146 at 3.891 degrees (North through East) ! Clean map min=-0.0059119 max=0.33273 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159155Jy sigma=0.001186 ! Fit after self-cal, rms=0.158050Jy sigma=0.001184 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158050Jy sigma=0.001184 ! Fit after self-cal, rms=0.157904Jy sigma=0.001183 ! Inverting map and beam ! Estimated beam: bmin=0.7651 mas, bmaj=2.127 mas, bpa=4.258 degrees ! Estimated noise=1702.06 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00227963 Jy ! Component: 100 - total flux cleaned = 0.0021731 Jy ! Component: 150 - total flux cleaned = 0.00212887 Jy ! Component: 200 - total flux cleaned = 0.00205294 Jy ! Total flux subtracted in 200 components = 0.00205294 Jy ! Clean residual min=-0.005881 max=0.006692 Jy/beam ! Clean residual mean=-0.000006 rms=0.001808 Jy/beam ! Combined flux in latest and established models = 0.388921 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 61 components and 0.388921 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157878Jy sigma=0.001183 ! Fit after self-cal, rms=0.157855Jy sigma=0.001183 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157855Jy sigma=0.001183 ! Fit after self-cal, rms=0.157774Jy sigma=0.001178 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157774Jy sigma=0.001178 ! Fit after self-cal, rms=0.157780Jy sigma=0.001178 ! Inverting map and beam ! Estimated beam: bmin=0.7633 mas, bmaj=2.122 mas, bpa=4.305 degrees ! Estimated noise=1700.67 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000956611 Jy ! Component: 100 - total flux cleaned = 0.00113517 Jy ! Component: 150 - total flux cleaned = 0.00113693 Jy ! Component: 200 - total flux cleaned = 0.00113752 Jy ! Total flux subtracted in 200 components = 0.00113752 Jy ! Clean residual min=-0.005877 max=0.006633 Jy/beam ! Clean residual mean=-0.000006 rms=0.001782 Jy/beam ! Combined flux in latest and established models = 0.390059 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 67 components and 0.390059 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157768Jy sigma=0.001178 ! Fit after self-cal, rms=0.157772Jy sigma=0.001178 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.94 mas, bmaj=10.61 mas, bpa=7.567 degrees ! Estimated noise=2307.92 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000446529 Jy ! Component: 100 - total flux cleaned = 0.000407294 Jy ! Component: 150 - total flux cleaned = 0.000367689 Jy ! Component: 200 - total flux cleaned = 0.000335438 Jy ! Total flux subtracted in 200 components = 0.000335438 Jy ! Clean residual min=-0.005569 max=0.008837 Jy/beam ! Clean residual mean=-0.000011 rms=0.002807 Jy/beam ! Combined flux in latest and established models = 0.390394 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 74 components and 0.390394 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157782Jy sigma=0.001178 ! Fit after self-cal, rms=0.157786Jy sigma=0.001178 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.5592 mas, bmaj=1.783 mas, bpa=5.262 degrees ! Estimated noise=3764.61 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.270208 Jy ! Component: 100 - total flux cleaned = 0.327121 Jy ! Component: 150 - total flux cleaned = 0.350258 Jy ! Component: 200 - total flux cleaned = 0.364703 Jy ! Total flux subtracted in 200 components = 0.364703 Jy ! Clean residual min=-0.010174 max=0.009325 Jy/beam ! Clean residual mean=-0.000027 rms=0.002748 Jy/beam ! Combined flux in latest and established models = 0.364703 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.364703 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7633 mas, bmaj=2.122 mas, bpa=4.305 degrees ! Estimated noise=1700.67 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0148459 Jy ! Component: 100 - total flux cleaned = 0.0208206 Jy ! Component: 150 - total flux cleaned = 0.0227895 Jy ! Component: 200 - total flux cleaned = 0.0240672 Jy ! Total flux subtracted in 200 components = 0.0240672 Jy ! Clean residual min=-0.006406 max=0.006304 Jy/beam ! Clean residual mean=-0.000007 rms=0.001852 Jy/beam ! Combined flux in latest and established models = 0.38877 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 31 components and 0.38877 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.94 mas, bmaj=10.61 mas, bpa=7.567 degrees ! Estimated noise=2307.92 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00146451 Jy ! Component: 100 - total flux cleaned = 0.00152062 Jy ! Component: 150 - total flux cleaned = 0.00161778 Jy ! Component: 200 - total flux cleaned = 0.00166528 Jy ! Total flux subtracted in 200 components = 0.00166528 Jy ! Clean residual min=-0.005755 max=0.008599 Jy/beam ! Clean residual mean=-0.000010 rms=0.002847 Jy/beam ! Combined flux in latest and established models = 0.390436 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 34 components and 0.390436 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7633 mas, bmaj=2.122 mas, bpa=4.305 degrees ! Estimated noise=1700.67 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000469379 Jy ! Component: 100 - total flux cleaned = 0.000476916 Jy ! Component: 150 - total flux cleaned = 0.000529495 Jy ! Component: 200 - total flux cleaned = 0.000570863 Jy ! Total flux subtracted in 200 components = 0.000570863 Jy ! Clean residual min=-0.005880 max=0.006516 Jy/beam ! Clean residual mean=-0.000004 rms=0.001775 Jy/beam ! Combined flux in latest and established models = 0.391007 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 46 components and 0.391007 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157765Jy sigma=0.001178 ! Fit after self-cal, rms=0.157767Jy sigma=0.001178 wmodel J0631-4154_X_2002_01_31_yyk\_map.mod ! Writing 46 model components to file: J0631-4154_X_2002_01_31_yyk_map.mod wobs J0631-4154_X_2002_01_31_yyk\_uvs.fits ! Applying 34 buffered edits. ! Writing UV FITS file: J0631-4154_X_2002_01_31_yyk_uvs.fits wwins J0631-4154_X_2002_01_31_yyk\_map.win ! wwins: Wrote 2 windows to J0631-4154_X_2002_01_31_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000728222 Jy ! Component: 100 - total flux cleaned = 0.00118708 Jy ! Component: 150 - total flux cleaned = 0.000863925 Jy ! Component: 200 - total flux cleaned = 0.000937749 Jy ! Component: 250 - total flux cleaned = 0.00107497 Jy ! Component: 300 - total flux cleaned = 0.00133147 Jy ! Component: 350 - total flux cleaned = 0.00139494 Jy ! Component: 400 - total flux cleaned = 0.0012774 Jy ! Component: 450 - total flux cleaned = 0.00133323 Jy ! Component: 500 - total flux cleaned = 0.00122185 Jy ! Component: 550 - total flux cleaned = 0.00111564 Jy ! Component: 600 - total flux cleaned = 0.00111741 Jy ! Component: 650 - total flux cleaned = 0.00106855 Jy ! Component: 700 - total flux cleaned = 0.00111639 Jy ! Component: 750 - total flux cleaned = 0.0008798 Jy ! Component: 800 - total flux cleaned = 0.000880847 Jy ! Component: 850 - total flux cleaned = 0.000880956 Jy ! Component: 900 - total flux cleaned = 0.000836996 Jy ! Component: 950 - total flux cleaned = 0.000707375 Jy ! Component: 1000 - total flux cleaned = 0.000580342 Jy ! Component: 1050 - total flux cleaned = 0.000539161 Jy ! Component: 1100 - total flux cleaned = 0.000457073 Jy ! Component: 1150 - total flux cleaned = 0.000457219 Jy ! Component: 1200 - total flux cleaned = 0.000657509 Jy ! Component: 1250 - total flux cleaned = 0.000736393 Jy ! Component: 1300 - total flux cleaned = 0.000814969 Jy ! Component: 1350 - total flux cleaned = 0.000931534 Jy ! Component: 1400 - total flux cleaned = 0.000892938 Jy ! Component: 1450 - total flux cleaned = 0.0010086 Jy ! Component: 1500 - total flux cleaned = 0.00112309 Jy ! Component: 1550 - total flux cleaned = 0.00119908 Jy ! Component: 1600 - total flux cleaned = 0.00123676 Jy ! Component: 1650 - total flux cleaned = 0.001199 Jy ! Component: 1700 - total flux cleaned = 0.00116107 Jy ! Component: 1750 - total flux cleaned = 0.00100937 Jy ! Component: 1800 - total flux cleaned = 0.000819619 Jy ! Component: 1850 - total flux cleaned = 0.000705819 Jy ! Component: 1900 - total flux cleaned = 0.000630028 Jy ! Component: 1950 - total flux cleaned = 0.000515733 Jy ! Component: 2000 - total flux cleaned = 0.000363356 Jy ! Total flux subtracted in 2048 components = 0.000248699 Jy ! Clean residual min=-0.002210 max=0.002099 Jy/beam ! Clean residual mean=0.000000 rms=0.000688 Jy/beam ! Combined flux in latest and established models = 0.391255 Jy keep ! Adding 104 model components to the UV plane model. ! The established model now contains 150 components and 0.391255 Jy ![Exited script file: muppet] wmap "J0631-4154_X_2002_01_31_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7633 x 2.122 at 4.305 degrees (North through East) ! Clean map min=-0.0048947 max=0.32951 Jy/beam ! Writing clean map to FITS file: J0631-4154_X_2002_01_31_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.329506 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000704267 device "J0631-4154_X_2002_01_31_yyk\_map.eps/VPS" ! Attempting to open device: 'J0631-4154_X_2002_01_31_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.641203 0.641203 1.28241 2.56481 5.12962 10.2592 20.5185 41.037 82.074 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0021 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.329 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7633 x 2.122 at 4.305 degrees (North through East) ! Clean map min=-0.0048947 max=0.32951 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0631-4154_X_2002_01_31_yyk\_map.gif/gif" ! Attempting to open device: 'J0631-4154_X_2002_01_31_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0631-4154_X_2002_01_31_yyk_uvs.log closed on Wed Jun 27 10:50:19 2007