! Started logfile: J0631-4154_S_2002_05_14_yyk_uvs.log on Tue Jun 26 22:22:32 2007
obs J0631-4154_S_2002_05_14_yyk_uva.fits
! Reading UV FITS file: J0631-4154_S_2002_05_14_yyk_uva.fits
! AN table 1: 39 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.287179 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J0631-4154
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.22947e+09        8e+06          1        8e+06
!  02        2  2.25947e+09        8e+06          1        8e+06
!  03        3  2.34947e+09        8e+06          1        8e+06
!  04        4  2.36947e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 1153 lines of history.
! 
! Reading 2016 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J0631-4154_S_2002_05_14_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.450401 Jy 
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.921 mas, bmaj=25.72 mas, bpa=27.71 degrees
! Estimated noise=5753.24 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.290979 Jy
! Component: 100  -  total flux cleaned = 0.38321 Jy
! Total flux subtracted in 100 components = 0.38321 Jy
! Clean residual min=-0.033264 max=0.035351 Jy/beam
! Clean residual mean=-0.000039 rms=0.013286 Jy/beam
! Combined flux in latest and established models = 0.38321 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 39 model components to the UV plane model.
! The established model now contains 39 components and 0.38321 Jy
! 
! Correcting IF 1.
!  A total of 173 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 214 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 173 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 173 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.285495Jy  sigma=0.001298
! Fit after  self-cal, rms=0.285296Jy  sigma=0.001297
! Inverting map and beam 
! Estimated beam: bmin=2.921 mas, bmaj=25.72 mas, bpa=27.71 degrees
! Estimated noise=5753.86 mJy/beam.
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.46 mas, bmaj=27.35 mas, bpa=26.7 degrees
! Estimated noise=3375.31 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0583905 Jy
! Component: 100  -  total flux cleaned = 0.0833816 Jy
! Component: 150  -  total flux cleaned = 0.0906266 Jy
! Component: 200  -  total flux cleaned = 0.0926908 Jy
! Total flux subtracted in 200 components = 0.0926908 Jy
! Clean residual min=-0.011016 max=0.011032 Jy/beam
! Clean residual mean=0.000251 rms=0.005255 Jy/beam
! Combined flux in latest and established models = 0.475901 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 108 model components to the UV plane model.
! The established model now contains 144 components and 0.475901 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.272451Jy  sigma=0.001218
! Fit after  self-cal, rms=0.272367Jy  sigma=0.001218
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.46 x 27.35 at 26.7 degrees (North through East)
! Clean map  min=-0.019602  max=0.32681 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.995923
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.17     HN        1.00*    KP        0.93     
!   LA        0.89     NL        1.01     OV        0.90     PT        1.00*    
!   SC        1.14     MK        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.0108
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.98     HN        1.00*    KP        1.00*    
!   LA        0.99     NL        1.03     OV        0.97     PT        1.00*    
!   SC        0.93     MK        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.976257
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.97     HN        1.00*    KP        0.94     
!   LA        0.98     NL        1.25     OV        1.13     PT        1.00*    
!   SC        0.97     MK        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.99971
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.89     HN        1.00*    KP        1.06     
!   LA        0.84     NL        1.22     OV        0.91     PT        1.00*    
!   SC        1.08     MK        1.00*    
! 
! 
! Fit before self-cal, rms=0.272367Jy  sigma=0.001218
! Fit after  self-cal, rms=0.278705Jy  sigma=0.001197
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.278705Jy  sigma=0.001197
! Fit after  self-cal, rms=0.278708Jy  sigma=0.001197
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.531 mas, bmaj=28.69 mas, bpa=26.63 degrees
! Estimated noise=3315.86 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.0024603 Jy
! Component: 100  -  total flux cleaned = -0.00916943 Jy
! Component: 150  -  total flux cleaned = -0.0149628 Jy
! Component: 200  -  total flux cleaned = -0.0174238 Jy
! Total flux subtracted in 200 components = -0.0174238 Jy
! Clean residual min=-0.004181 max=0.004170 Jy/beam
! Clean residual mean=-0.000086 rms=0.001554 Jy/beam
! Combined flux in latest and established models = 0.458477 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 52 model components to the UV plane model.
! The established model now contains 195 components and 0.458477 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.277569Jy  sigma=0.001191
! Fit after  self-cal, rms=0.277527Jy  sigma=0.001191
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.277527Jy  sigma=0.001191
! Fit after  self-cal, rms=0.276069Jy  sigma=0.001183
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.0034486 Jy
! Component: 100  -  total flux cleaned = -0.0050285 Jy
! Component: 150  -  total flux cleaned = -0.00674843 Jy
! Component: 200  -  total flux cleaned = -0.00818944 Jy
! Total flux subtracted in 200 components = -0.00818944 Jy
! Clean residual min=-0.002226 max=0.002207 Jy/beam
! Clean residual mean=-0.000044 rms=0.000878 Jy/beam
! Combined flux in latest and established models = 0.450287 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 49 model components to the UV plane model.
! The established model now contains 241 components and 0.450287 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.275731Jy  sigma=0.001182
! Fit after  self-cal, rms=0.275642Jy  sigma=0.001181
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.531 x 28.69 at 26.63 degrees (North through East)
! Clean map  min=-0.012319  max=0.32363 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.275642Jy  sigma=0.001181
! Fit after  self-cal, rms=0.278190Jy  sigma=0.001180
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.278190Jy  sigma=0.001180
! Fit after  self-cal, rms=0.278232Jy  sigma=0.001180
! Inverting map and beam 
! Estimated beam: bmin=3.502 mas, bmaj=28.87 mas, bpa=26.63 degrees
! Estimated noise=3297.53 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00199749 Jy
! Component: 100  -  total flux cleaned = -0.00448722 Jy
! Component: 150  -  total flux cleaned = -0.00620812 Jy
! Component: 200  -  total flux cleaned = -0.00687902 Jy
! Total flux subtracted in 200 components = -0.00687902 Jy
! Clean residual min=-0.002095 max=0.002117 Jy/beam
! Clean residual mean=-0.000059 rms=0.000829 Jy/beam
! Combined flux in latest and established models = 0.443408 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 44 model components to the UV plane model.
! The established model now contains 272 components and 0.443408 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.278023Jy  sigma=0.001179
! Fit after  self-cal, rms=0.278057Jy  sigma=0.001179
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.278057Jy  sigma=0.001179
! Fit after  self-cal, rms=0.284673Jy  sigma=0.001171
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.284673Jy  sigma=0.001171
! Fit after  self-cal, rms=0.284724Jy  sigma=0.001171
! Inverting map and beam 
! Estimated beam: bmin=3.497 mas, bmaj=29.06 mas, bpa=26.62 degrees
! Estimated noise=3290.43 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.0029279 Jy
! Component: 100  -  total flux cleaned = -0.00476471 Jy
! Component: 150  -  total flux cleaned = -0.00602168 Jy
! Component: 200  -  total flux cleaned = -0.00589084 Jy
! Total flux subtracted in 200 components = -0.00589084 Jy
! Clean residual min=-0.001601 max=0.001607 Jy/beam
! Clean residual mean=-0.000038 rms=0.000684 Jy/beam
! Combined flux in latest and established models = 0.437518 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 46 model components to the UV plane model.
! The established model now contains 305 components and 0.437518 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.284594Jy  sigma=0.001170
! Fit after  self-cal, rms=0.284616Jy  sigma=0.001170
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.776 mas, bmaj=45.14 mas, bpa=13.83 degrees
! Estimated noise=3928.79 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00217123 Jy
! Component: 100  -  total flux cleaned = -0.00362102 Jy
! Component: 150  -  total flux cleaned = -0.00402737 Jy
! Component: 200  -  total flux cleaned = -0.00424107 Jy
! Total flux subtracted in 200 components = -0.00424107 Jy
! Clean residual min=-0.001393 max=0.001400 Jy/beam
! Clean residual mean=-0.000044 rms=0.000574 Jy/beam
! Combined flux in latest and established models = 0.433276 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 56 model components to the UV plane model.
! The established model now contains 361 components and 0.433276 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.284569Jy  sigma=0.001170
! Fit after  self-cal, rms=0.284582Jy  sigma=0.001170
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.943 mas, bmaj=26.56 mas, bpa=27.58 degrees
! Estimated noise=5760.4 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.290308 Jy
! Component: 100  -  total flux cleaned = 0.37283 Jy
! Component: 150  -  total flux cleaned = 0.407982 Jy
! Component: 200  -  total flux cleaned = 0.422073 Jy
! Total flux subtracted in 200 components = 0.422073 Jy
! Clean residual min=-0.015189 max=0.015111 Jy/beam
! Clean residual mean=0.000001 rms=0.006649 Jy/beam
! Combined flux in latest and established models = 0.422073 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 72 model components to the UV plane model.
! The established model now contains 72 components and 0.422073 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.497 mas, bmaj=29.06 mas, bpa=26.62 degrees
! Estimated noise=3290.43 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0198652 Jy
! Component: 100  -  total flux cleaned = 0.0383663 Jy
! Component: 150  -  total flux cleaned = 0.043141 Jy
! Component: 200  -  total flux cleaned = 0.0430926 Jy
! Total flux subtracted in 200 components = 0.0430926 Jy
! Clean residual min=-0.006706 max=0.006674 Jy/beam
! Clean residual mean=-0.000020 rms=0.002674 Jy/beam
! Combined flux in latest and established models = 0.465166 Jy
! Adding 68 model components to the UV plane model.
! The established model now contains 140 components and 0.465166 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.776 mas, bmaj=45.14 mas, bpa=13.83 degrees
! Estimated noise=3928.79 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00399467 Jy
! Component: 100  -  total flux cleaned = 0.00600411 Jy
! Component: 150  -  total flux cleaned = 0.00582372 Jy
! Component: 200  -  total flux cleaned = 0.0049559 Jy
! Total flux subtracted in 200 components = 0.0049559 Jy
! Clean residual min=-0.002668 max=0.002683 Jy/beam
! Clean residual mean=-0.000006 rms=0.001344 Jy/beam
! Combined flux in latest and established models = 0.470122 Jy
! Adding 64 model components to the UV plane model.
! The established model now contains 202 components and 0.470122 Jy
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.497 mas, bmaj=29.06 mas, bpa=26.62 degrees
! Estimated noise=3290.43 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00304216 Jy
! Component: 100  -  total flux cleaned = -0.00464628 Jy
! Component: 150  -  total flux cleaned = -0.00680767 Jy
! Component: 200  -  total flux cleaned = -0.00639823 Jy
! Total flux subtracted in 200 components = -0.00639823 Jy
! Clean residual min=-0.002581 max=0.002588 Jy/beam
! Clean residual mean=-0.000010 rms=0.001069 Jy/beam
! Combined flux in latest and established models = 0.463724 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 50 model components to the UV plane model.
! The established model now contains 250 components and 0.463724 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.285055Jy  sigma=0.001172
! Fit after  self-cal, rms=0.284998Jy  sigma=0.001172
wmodel J0631-4154_S_2002_05_14_yyk\_map.mod
! Writing 250 model components to file: J0631-4154_S_2002_05_14_yyk_map.mod
wobs J0631-4154_S_2002_05_14_yyk\_uvs.fits
! Writing UV FITS file: J0631-4154_S_2002_05_14_yyk_uvs.fits
wwins J0631-4154_S_2002_05_14_yyk\_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: muppet]
! 
wmap "J0631-4154_S_2002_05_14_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.497 x 29.06 at 26.62 degrees (North through East)
! Clean map  min=-0.013358  max=0.32125 Jy/beam
! Writing clean map to FITS file: J0631-4154_S_2002_05_14_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.321255 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00102948 
device "J0631-4154_S_2002_05_14_yyk\_map.eps/VPS"
! Attempting to open device: 'J0631-4154_S_2002_05_14_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.96137 0.96137 1.92274 3.84548 7.69096 15.3819 30.7638 61.5277
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.003 
print "peak=",int(peak_flux*1000)/1000
! peak= 0.321 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.497 x 29.06 at 26.62 degrees (North through East)
! Clean map  min=-0.013358  max=0.32125 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J0631-4154_S_2002_05_14_yyk\_map.gif/gif"
! Attempting to open device: 'J0631-4154_S_2002_05_14_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J0631-4154_S_2002_05_14_yyk_uvs.log closed on Tue Jun 26 22:22:38 2007