! Started logfile: J0617-3634_X_2002_01_31_yyk_uvs.log on Wed Jun 27 10:49:59 2007
obs J0617-3634_X_2002_01_31_yyk_uva.fits
! Reading UV FITS file: J0617-3634_X_2002_01_31_yyk_uva.fits
! AN table 1: 34 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.301307 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J0617-3634
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40947e+09        8e+06          1        8e+06
!  02        2  8.47947e+09        8e+06          1        8e+06
!  03        3  8.79447e+09        8e+06          1        8e+06
!  04        4  8.89947e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 1545 lines of history.
! 
! Reading 1844 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
flag NL
! Flagging baselines of antenna 1:NL in the currently selected channels.
![@muppet J0617-3634_X_2002_01_31_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.2088 Jy 
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.251 mas, bmaj=17 mas, bpa=8.079 degrees
! Estimated noise=2625.08 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0178797 Jy
! Component: 100  -  total flux cleaned = 0.0102508 Jy
! Total flux subtracted in 100 components = 0.0102508 Jy
! Clean residual min=-0.005560 max=0.005517 Jy/beam
! Clean residual mean=-0.000441 rms=0.002586 Jy/beam
! Combined flux in latest and established models = 0.0102508 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 36 model components to the UV plane model.
! The established model now contains 36 components and 0.0102508 Jy
! 
! Correcting IF 1.
!  A total of 180 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 180 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 180 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 180 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.205693Jy  sigma=0.001635
! Fit after  self-cal, rms=0.204841Jy  sigma=0.001627
! Inverting map and beam 
! Estimated beam: bmin=3.251 mas, bmaj=17 mas, bpa=8.079 degrees
! Estimated noise=2625.08 mJy/beam.
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.481 mas, bmaj=17.1 mas, bpa=8.45 degrees
! Estimated noise=2427.05 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00836436 Jy
! Component: 100  -  total flux cleaned = 0.00825565 Jy
! Component: 150  -  total flux cleaned = 0.00748667 Jy
! Component: 200  -  total flux cleaned = 0.00768529 Jy
! Total flux subtracted in 200 components = 0.00768529 Jy
! Clean residual min=-0.002659 max=0.002641 Jy/beam
! Clean residual mean=-0.000034 rms=0.001315 Jy/beam
! Combined flux in latest and established models = 0.0179361 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 102 model components to the UV plane model.
! The established model now contains 137 components and 0.0179361 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.203625Jy  sigma=0.001616
! Fit after  self-cal, rms=0.203540Jy  sigma=0.001616
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.481 x 17.1 at 8.45 degrees (North through East)
! Clean map  min=-0.0097199  max=0.036279 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.203540Jy  sigma=0.001616
! Fit after  self-cal, rms=0.203947Jy  sigma=0.001618
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.203947Jy  sigma=0.001618
! Fit after  self-cal, rms=0.203942Jy  sigma=0.001618
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.486 mas, bmaj=17.09 mas, bpa=8.423 degrees
! Estimated noise=2440.28 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00432519 Jy
! Component: 100  -  total flux cleaned = -0.00636929 Jy
! Component: 150  -  total flux cleaned = -0.00677197 Jy
! Component: 200  -  total flux cleaned = -0.00732477 Jy
! Total flux subtracted in 200 components = -0.00732477 Jy
! Clean residual min=-0.002235 max=0.002290 Jy/beam
! Clean residual mean=0.000075 rms=0.000999 Jy/beam
! Combined flux in latest and established models = 0.0106113 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 71 model components to the UV plane model.
! The established model now contains 202 components and 0.0106113 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.203577Jy  sigma=0.001615
! Fit after  self-cal, rms=0.203503Jy  sigma=0.001614
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.203503Jy  sigma=0.001614
! Fit after  self-cal, rms=0.201018Jy  sigma=0.001592
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0111468 Jy
! Component: 100  -  total flux cleaned = 0.0105708 Jy
! Component: 150  -  total flux cleaned = 0.00922614 Jy
! Component: 200  -  total flux cleaned = 0.00855584 Jy
! Total flux subtracted in 200 components = 0.00855584 Jy
! Clean residual min=-0.002557 max=0.002610 Jy/beam
! Clean residual mean=0.000055 rms=0.001173 Jy/beam
! Combined flux in latest and established models = 0.0191672 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 97 model components to the UV plane model.
! The established model now contains 297 components and 0.0191672 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.199953Jy  sigma=0.001583
! Fit after  self-cal, rms=0.199247Jy  sigma=0.001578
! Inverting map 
! Added new window around map position (-25.2, 2.6).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00104035 Jy
! Component: 100  -  total flux cleaned = 0.00176679 Jy
! Component: 150  -  total flux cleaned = 0.00217346 Jy
! Component: 200  -  total flux cleaned = 0.00219693 Jy
! Total flux subtracted in 200 components = 0.00219693 Jy
! Clean residual min=-0.004245 max=0.004526 Jy/beam
! Clean residual mean=0.000167 rms=0.001488 Jy/beam
! Combined flux in latest and established models = 0.0213641 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 73 model components to the UV plane model.
! The established model now contains 369 components and 0.0213641 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.198996Jy  sigma=0.001576
! Fit after  self-cal, rms=0.198818Jy  sigma=0.001575
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.486 x 17.09 at 8.423 degrees (North through East)
! Clean map  min=-0.018558  max=0.042403 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.625 mas, bmaj=16.95 mas, bpa=8.364 degrees
! Estimated noise=2449.68 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00186654 Jy
! Component: 100  -  total flux cleaned = -0.00187956 Jy
! Component: 150  -  total flux cleaned = -0.0016208 Jy
! Component: 200  -  total flux cleaned = -0.00145606 Jy
! Total flux subtracted in 200 components = -0.00145606 Jy
! Clean residual min=-0.003459 max=0.004747 Jy/beam
! Clean residual mean=0.000202 rms=0.001359 Jy/beam
! Combined flux in latest and established models = 0.019908 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 71 model components to the UV plane model.
! The established model now contains 421 components and 0.019908 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.198745Jy  sigma=0.001574
! Fit after  self-cal, rms=0.198635Jy  sigma=0.001574
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.251 mas, bmaj=17 mas, bpa=8.08 degrees
! Estimated noise=2647.95 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.0174391 Jy
! Component: 100  -  total flux cleaned = -0.0196544 Jy
! Component: 150  -  total flux cleaned = -0.0237744 Jy
! Component: 200  -  total flux cleaned = -0.0246698 Jy
! Total flux subtracted in 200 components = -0.0246698 Jy
! Clean residual min=-0.016361 max=0.034694 Jy/beam
! Clean residual mean=-0.000598 rms=0.008457 Jy/beam
! Combined flux in latest and established models = -0.0246698 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 69 model components to the UV plane model.
! The established model now contains 69 components and -0.0246698 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.486 mas, bmaj=17.09 mas, bpa=8.423 degrees
! Estimated noise=2440.28 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.0150758 Jy
! Component: 100  -  total flux cleaned = -0.0202573 Jy
! Component: 150  -  total flux cleaned = -0.022886 Jy
! Component: 200  -  total flux cleaned = -0.0262143 Jy
! Total flux subtracted in 200 components = -0.0262143 Jy
! Clean residual min=-0.017466 max=0.031645 Jy/beam
! Clean residual mean=-0.000258 rms=0.008881 Jy/beam
! Combined flux in latest and established models = -0.0508841 Jy
! Adding 69 model components to the UV plane model.
! The established model now contains 134 components and -0.0508841 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.625 mas, bmaj=16.95 mas, bpa=8.364 degrees
! Estimated noise=2449.68 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00540829 Jy
! Component: 100  -  total flux cleaned = -0.00759551 Jy
! Component: 150  -  total flux cleaned = -0.00984917 Jy
! Component: 200  -  total flux cleaned = -0.0116756 Jy
! Total flux subtracted in 200 components = -0.0116756 Jy
! Clean residual min=-0.017457 max=0.029758 Jy/beam
! Clean residual mean=-0.000084 rms=0.008893 Jy/beam
! Combined flux in latest and established models = -0.0625596 Jy
! Adding 60 model components to the UV plane model.
! The established model now contains 178 components and -0.0625596 Jy
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.486 mas, bmaj=17.09 mas, bpa=8.423 degrees
! Estimated noise=2440.28 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00144058 Jy
! Component: 100  -  total flux cleaned = 0.00117324 Jy
! Component: 150  -  total flux cleaned = 0.000662424 Jy
! Component: 200  -  total flux cleaned = 0.000171433 Jy
! Total flux subtracted in 200 components = 0.000171433 Jy
! Clean residual min=-0.016916 max=0.027317 Jy/beam
! Clean residual mean=-0.000048 rms=0.008310 Jy/beam
! Combined flux in latest and established models = -0.0623882 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 71 model components to the UV plane model.
! The established model now contains 234 components and -0.0623882 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.202126Jy  sigma=0.001611
! Fit after  self-cal, rms=0.201213Jy  sigma=0.001600
wmodel J0617-3634_X_2002_01_31_yyk\_map.mod
! Writing 234 model components to file: J0617-3634_X_2002_01_31_yyk_map.mod
wobs J0617-3634_X_2002_01_31_yyk\_uvs.fits
! Applying 34 buffered edits.
! Writing UV FITS file: J0617-3634_X_2002_01_31_yyk_uvs.fits
wwins J0617-3634_X_2002_01_31_yyk\_map.win
! wwins: Wrote 1 windows to J0617-3634_X_2002_01_31_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00717038 Jy
! Component: 100  -  total flux cleaned = 0.0122065 Jy
! Component: 150  -  total flux cleaned = 0.0157642 Jy
! Component: 200  -  total flux cleaned = 0.0178356 Jy
! Component: 250  -  total flux cleaned = 0.0195665 Jy
! Component: 300  -  total flux cleaned = 0.0209985 Jy
! Component: 350  -  total flux cleaned = 0.0219551 Jy
! Component: 400  -  total flux cleaned = 0.0228176 Jy
! Component: 450  -  total flux cleaned = 0.023256 Jy
! Component: 500  -  total flux cleaned = 0.02294 Jy
! Component: 550  -  total flux cleaned = 0.0228644 Jy
! Component: 600  -  total flux cleaned = 0.0227931 Jy
! Component: 650  -  total flux cleaned = 0.0225797 Jy
! Component: 700  -  total flux cleaned = 0.0223709 Jy
! Component: 750  -  total flux cleaned = 0.0225085 Jy
! Component: 800  -  total flux cleaned = 0.0226445 Jy
! Component: 850  -  total flux cleaned = 0.0227114 Jy
! Component: 900  -  total flux cleaned = 0.0227116 Jy
! Component: 950  -  total flux cleaned = 0.0227783 Jy
! Component: 1000  -  total flux cleaned = 0.0228448 Jy
! Component: 1050  -  total flux cleaned = 0.0228438 Jy
! Component: 1100  -  total flux cleaned = 0.0230472 Jy
! Component: 1150  -  total flux cleaned = 0.023049 Jy
! Component: 1200  -  total flux cleaned = 0.0231874 Jy
! Component: 1250  -  total flux cleaned = 0.0233293 Jy
! Component: 1300  -  total flux cleaned = 0.0234736 Jy
! Component: 1350  -  total flux cleaned = 0.0235482 Jy
! Component: 1400  -  total flux cleaned = 0.0236215 Jy
! Component: 1450  -  total flux cleaned = 0.0238496 Jy
! Component: 1500  -  total flux cleaned = 0.0239285 Jy
! Component: 1550  -  total flux cleaned = 0.0240074 Jy
! Component: 1600  -  total flux cleaned = 0.0241694 Jy
! Component: 1650  -  total flux cleaned = 0.024253 Jy
! Component: 1700  -  total flux cleaned = 0.024421 Jy
! Component: 1750  -  total flux cleaned = 0.0245922 Jy
! Component: 1800  -  total flux cleaned = 0.0245885 Jy
! Component: 1850  -  total flux cleaned = 0.0244982 Jy
! Component: 1900  -  total flux cleaned = 0.0244042 Jy
! Component: 1950  -  total flux cleaned = 0.0244039 Jy
! Component: 2000  -  total flux cleaned = 0.0243043 Jy
! Total flux subtracted in 2048 components = 0.024304 Jy
! Clean residual min=-0.005485 max=0.005322 Jy/beam
! Clean residual mean=0.000073 rms=0.002105 Jy/beam
! Combined flux in latest and established models = -0.0380842 Jy
keep
! Adding 182 model components to the UV plane model.
! The established model now contains 416 components and -0.0380842 Jy
![Exited script file: muppet]
wmap "J0617-3634_X_2002_01_31_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.486 x 17.09 at 8.423 degrees (North through East)
! Clean map  min=-0.034582  max=0.025526 Jy/beam
! Writing clean map to FITS file: J0617-3634_X_2002_01_31_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0255264 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00231707 
device "J0617-3634_X_2002_01_31_yyk\_map.eps/VPS"
! Attempting to open device: 'J0617-3634_X_2002_01_31_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -27.2314 27.2314 54.4628
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0069 
print "peak=",int(peak_flux*1000)/1000
! peak= 0.025 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.486 x 17.09 at 8.423 degrees (North through East)
! Clean map  min=-0.034582  max=0.025526 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J0617-3634_X_2002_01_31_yyk\_map.gif/gif"
! Attempting to open device: 'J0617-3634_X_2002_01_31_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J0617-3634_X_2002_01_31_yyk_uvs.log closed on Wed Jun 27 10:50:08 2007