! Started logfile: J0616-3456_S_2002_01_31_yyk_uvs.log on Tue Jun 26 22:21:17 2007 obs J0616-3456_S_2002_01_31_yyk_uva.fits ! Reading UV FITS file: J0616-3456_S_2002_01_31_yyk_uva.fits ! AN table 1: 78 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.682336 visibilities/baseline/integration-bin. ! Found source: J0616-3456 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22947e+09 8e+06 1 8e+06 ! 02 2 2.25947e+09 8e+06 1 8e+06 ! 03 3 2.34947e+09 8e+06 1 8e+06 ! 04 4 2.36947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1225 lines of history. ! ! Reading 9580 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0616-3456_S_2002_01_31_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.642352 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.327 mas, bmaj=6.19 mas, bpa=1.532 degrees ! Estimated noise=2036.78 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.5, 1). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0584701 Jy ! Component: 100 - total flux cleaned = 0.0860483 Jy ! Total flux subtracted in 100 components = 0.0860483 Jy ! Clean residual min=-0.020209 max=0.025038 Jy/beam ! Clean residual mean=0.000407 rms=0.006347 Jy/beam ! Combined flux in latest and established models = 0.0860483 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.0860483 Jy ! ! Correcting IF 1. ! A total of 147 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 226 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 279 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 135 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.635768Jy sigma=0.003705 ! Fit after self-cal, rms=0.635235Jy sigma=0.003700 ! Inverting map and beam ! Estimated beam: bmin=2.327 mas, bmaj=6.19 mas, bpa=1.532 degrees ! Estimated noise=2045.34 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.271 mas, bmaj=8.208 mas, bpa=-1.752 degrees ! Estimated noise=1143.25 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0447542 Jy ! Component: 100 - total flux cleaned = 0.0607608 Jy ! Component: 150 - total flux cleaned = 0.0650786 Jy ! Component: 200 - total flux cleaned = 0.0658111 Jy ! Total flux subtracted in 200 components = 0.0658111 Jy ! Clean residual min=-0.020718 max=0.040482 Jy/beam ! Clean residual mean=0.002537 rms=0.011731 Jy/beam ! Combined flux in latest and established models = 0.151859 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 34 components and 0.151859 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.633780Jy sigma=0.003685 ! Fit after self-cal, rms=0.633734Jy sigma=0.003685 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.271 x 8.208 at -1.752 degrees (North through East) ! Clean map min=-0.020497 max=0.052286 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.633734Jy sigma=0.003685 ! Fit after self-cal, rms=0.633734Jy sigma=0.003685 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.633734Jy sigma=0.003685 ! Fit after self-cal, rms=0.633732Jy sigma=0.003685 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.271 mas, bmaj=8.208 mas, bpa=-1.752 degrees ! Estimated noise=1143.25 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000836332 Jy ! Component: 100 - total flux cleaned = 0.00130305 Jy ! Component: 150 - total flux cleaned = 0.00171119 Jy ! Component: 200 - total flux cleaned = 0.00208597 Jy ! Total flux subtracted in 200 components = 0.00208597 Jy ! Clean residual min=-0.020593 max=0.040809 Jy/beam ! Clean residual mean=0.002536 rms=0.011656 Jy/beam ! Combined flux in latest and established models = 0.153945 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 42 components and 0.153945 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.633637Jy sigma=0.003684 ! Fit after self-cal, rms=0.633626Jy sigma=0.003684 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.633626Jy sigma=0.003684 ! Fit after self-cal, rms=0.632735Jy sigma=0.003678 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00255491 Jy ! Component: 100 - total flux cleaned = 0.00384116 Jy ! Component: 150 - total flux cleaned = 0.00441394 Jy ! Component: 200 - total flux cleaned = 0.00466953 Jy ! Total flux subtracted in 200 components = 0.00466953 Jy ! Clean residual min=-0.023099 max=0.041681 Jy/beam ! Clean residual mean=0.002533 rms=0.011533 Jy/beam ! Combined flux in latest and established models = 0.158615 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 47 components and 0.158615 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.632477Jy sigma=0.003676 ! Fit after self-cal, rms=0.631816Jy sigma=0.003672 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.271 x 8.208 at -1.752 degrees (North through East) ! Clean map min=-0.02428 max=0.054008 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.202 mas, bmaj=26.83 mas, bpa=2.96 degrees ! Estimated noise=1426.62 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.011082 Jy ! Component: 100 - total flux cleaned = 0.0116363 Jy ! Component: 150 - total flux cleaned = 0.0119224 Jy ! Component: 200 - total flux cleaned = 0.0124598 Jy ! Total flux subtracted in 200 components = 0.0124598 Jy ! Clean residual min=-0.030228 max=0.061291 Jy/beam ! Clean residual mean=0.004499 rms=0.019062 Jy/beam ! Combined flux in latest and established models = 0.171075 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 5 model components to the UV plane model. ! The established model now contains 47 components and 0.171075 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.631837Jy sigma=0.003672 ! Fit after self-cal, rms=0.631246Jy sigma=0.003668 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.327 mas, bmaj=6.19 mas, bpa=1.532 degrees ! Estimated noise=2045.34 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.104342 Jy ! Component: 100 - total flux cleaned = 0.124383 Jy ! Component: 150 - total flux cleaned = 0.12856 Jy ! Component: 200 - total flux cleaned = 0.128582 Jy ! Total flux subtracted in 200 components = 0.128582 Jy ! Clean residual min=-0.037736 max=0.040937 Jy/beam ! Clean residual mean=0.000465 rms=0.017380 Jy/beam ! Combined flux in latest and established models = 0.128582 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.128582 Jy ! Inverting map and beam ! Estimated beam: bmin=3.271 mas, bmaj=8.208 mas, bpa=-1.752 degrees ! Estimated noise=1143.25 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0261969 Jy ! Component: 100 - total flux cleaned = 0.0277457 Jy ! Component: 150 - total flux cleaned = 0.0282303 Jy ! Component: 200 - total flux cleaned = 0.0291155 Jy ! Total flux subtracted in 200 components = 0.0291155 Jy ! Clean residual min=-0.026222 max=0.044084 Jy/beam ! Clean residual mean=0.002541 rms=0.011989 Jy/beam ! Combined flux in latest and established models = 0.157697 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 27 components and 0.157697 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.202 mas, bmaj=26.83 mas, bpa=2.96 degrees ! Estimated noise=1426.62 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0137667 Jy ! Component: 100 - total flux cleaned = 0.0140342 Jy ! Component: 150 - total flux cleaned = 0.0143161 Jy ! Component: 200 - total flux cleaned = 0.0148395 Jy ! Total flux subtracted in 200 components = 0.0148395 Jy ! Clean residual min=-0.029967 max=0.061508 Jy/beam ! Clean residual mean=0.004497 rms=0.018990 Jy/beam ! Combined flux in latest and established models = 0.172537 Jy ! Adding 6 model components to the UV plane model. ! The established model now contains 32 components and 0.172537 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.271 mas, bmaj=8.208 mas, bpa=-1.752 degrees ! Estimated noise=1143.25 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00940741 Jy ! Component: 100 - total flux cleaned = -0.00940543 Jy ! Component: 150 - total flux cleaned = -0.00942141 Jy ! Component: 200 - total flux cleaned = -0.00941935 Jy ! Total flux subtracted in 200 components = -0.00941935 Jy ! Clean residual min=-0.025656 max=0.044629 Jy/beam ! Clean residual mean=0.002520 rms=0.011840 Jy/beam ! Combined flux in latest and established models = 0.163118 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 42 components and 0.163118 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.628735Jy sigma=0.003655 ! Fit after self-cal, rms=0.628140Jy sigma=0.003652 wmodel J0616-3456_S_2002_01_31_yyk\_map.mod ! Writing 42 model components to file: J0616-3456_S_2002_01_31_yyk_map.mod wobs J0616-3456_S_2002_01_31_yyk\_uvs.fits ! Writing UV FITS file: J0616-3456_S_2002_01_31_yyk_uvs.fits wwins J0616-3456_S_2002_01_31_yyk\_map.win ! wwins: Wrote 1 windows to J0616-3456_S_2002_01_31_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0197124 Jy ! Component: 100 - total flux cleaned = 0.0362401 Jy ! Component: 150 - total flux cleaned = 0.0508984 Jy ! Component: 200 - total flux cleaned = 0.0641848 Jy ! Component: 250 - total flux cleaned = 0.0764573 Jy ! Component: 300 - total flux cleaned = 0.0874233 Jy ! Component: 350 - total flux cleaned = 0.0951519 Jy ! Component: 400 - total flux cleaned = 0.100838 Jy ! Component: 450 - total flux cleaned = 0.105468 Jy ! Component: 500 - total flux cleaned = 0.110967 Jy ! Component: 550 - total flux cleaned = 0.115886 Jy ! Component: 600 - total flux cleaned = 0.121305 Jy ! Component: 650 - total flux cleaned = 0.126517 Jy ! Component: 700 - total flux cleaned = 0.130291 Jy ! Component: 750 - total flux cleaned = 0.134544 Jy ! Component: 800 - total flux cleaned = 0.13836 Jy ! Component: 850 - total flux cleaned = 0.141778 Jy ! Component: 900 - total flux cleaned = 0.145101 Jy ! Component: 950 - total flux cleaned = 0.148603 Jy ! Component: 1000 - total flux cleaned = 0.152279 Jy ! Component: 1050 - total flux cleaned = 0.15664 Jy ! Component: 1100 - total flux cleaned = 0.160146 Jy ! Component: 1150 - total flux cleaned = 0.163576 Jy ! Component: 1200 - total flux cleaned = 0.1674 Jy ! Component: 1250 - total flux cleaned = 0.170901 Jy ! Component: 1300 - total flux cleaned = 0.173418 Jy ! Component: 1350 - total flux cleaned = 0.176776 Jy ! Component: 1400 - total flux cleaned = 0.179838 Jy ! Component: 1450 - total flux cleaned = 0.182407 Jy ! Component: 1500 - total flux cleaned = 0.185135 Jy ! Component: 1550 - total flux cleaned = 0.188014 Jy ! Component: 1600 - total flux cleaned = 0.191037 Jy ! Component: 1650 - total flux cleaned = 0.193615 Jy ! Component: 1700 - total flux cleaned = 0.196543 Jy ! Component: 1750 - total flux cleaned = 0.199419 Jy ! Component: 1800 - total flux cleaned = 0.20244 Jy ! Component: 1850 - total flux cleaned = 0.205591 Jy ! Component: 1900 - total flux cleaned = 0.207968 Jy ! Component: 1950 - total flux cleaned = 0.21156 Jy ! Component: 2000 - total flux cleaned = 0.213683 Jy ! Total flux subtracted in 2048 components = 0.216474 Jy ! Clean residual min=-0.009837 max=0.010139 Jy/beam ! Clean residual mean=0.000990 rms=0.004040 Jy/beam ! Combined flux in latest and established models = 0.379592 Jy keep ! Adding 195 model components to the UV plane model. ! The established model now contains 237 components and 0.379592 Jy ![Exited script file: muppet] wmap "J0616-3456_S_2002_01_31_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.271 x 8.208 at -1.752 degrees (North through East) ! Clean map min=-0.012954 max=0.066209 Jy/beam ! Writing clean map to FITS file: J0616-3456_S_2002_01_31_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0662085 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00403283 device "J0616-3456_S_2002_01_31_yyk\_map.eps/VPS" ! Attempting to open device: 'J0616-3456_S_2002_01_31_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -18.2733 18.2733 36.5466 73.0932 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.012 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.066 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.271 x 8.208 at -1.752 degrees (North through East) ! Clean map min=-0.012954 max=0.066209 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0616-3456_S_2002_01_31_yyk\_map.gif/gif" ! Attempting to open device: 'J0616-3456_S_2002_01_31_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0616-3456_S_2002_01_31_yyk_uvs.log closed on Tue Jun 26 22:21:23 2007