! Started logfile: J0605-3522_S_2002_05_14_yyk_uvs.log on Tue Jun 26 22:20:17 2007 obs J0605-3522_S_2002_05_14_yyk_uva.fits ! Reading UV FITS file: J0605-3522_S_2002_05_14_yyk_uva.fits ! AN table 1: 47 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.608983 visibilities/baseline/integration-bin. ! Found source: J0605-3522 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22947e+09 8e+06 1 8e+06 ! 02 2 2.25947e+09 8e+06 1 8e+06 ! 03 3 2.34947e+09 8e+06 1 8e+06 ! 04 4 2.36947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1157 lines of history. ! ! Reading 5152 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0605-3522_S_2002_05_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.335883 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.156 mas, bmaj=18.13 mas, bpa=17.6 degrees ! Estimated noise=2569.94 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.131921 Jy ! Component: 100 - total flux cleaned = 0.173086 Jy ! Total flux subtracted in 100 components = 0.173086 Jy ! Clean residual min=-0.017038 max=0.021549 Jy/beam ! Clean residual mean=0.000103 rms=0.005302 Jy/beam ! Combined flux in latest and established models = 0.173086 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.173086 Jy ! ! Correcting IF 1. ! A total of 185 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 181 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 146 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 146 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.298421Jy sigma=0.001320 ! Fit after self-cal, rms=0.294965Jy sigma=0.001314 ! Inverting map and beam ! Estimated beam: bmin=3.156 mas, bmaj=18.13 mas, bpa=17.6 degrees ! Estimated noise=2580.76 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.805 mas, bmaj=22.44 mas, bpa=17.64 degrees ! Estimated noise=1936.39 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0231631 Jy ! Component: 100 - total flux cleaned = 0.0264588 Jy ! Component: 150 - total flux cleaned = 0.0273422 Jy ! Component: 200 - total flux cleaned = 0.0273607 Jy ! Total flux subtracted in 200 components = 0.0273607 Jy ! Clean residual min=-0.008786 max=0.007968 Jy/beam ! Clean residual mean=0.000046 rms=0.002420 Jy/beam ! Combined flux in latest and established models = 0.200447 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 50 model components to the UV plane model. ! The established model now contains 80 components and 0.200447 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.293686Jy sigma=0.001305 ! Fit after self-cal, rms=0.293672Jy sigma=0.001305 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.805 x 22.44 at 17.64 degrees (North through East) ! Clean map min=-0.010437 max=0.12133 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Fit before self-cal, rms=0.293672Jy sigma=0.001305 ! Fit after self-cal, rms=0.293468Jy sigma=0.001305 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.293468Jy sigma=0.001305 ! Fit after self-cal, rms=0.293477Jy sigma=0.001305 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.809 mas, bmaj=22.46 mas, bpa=17.63 degrees ! Estimated noise=1937.29 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000160102 Jy ! Component: 100 - total flux cleaned = -7.7982e-06 Jy ! Component: 150 - total flux cleaned = -1.03278e-05 Jy ! Component: 200 - total flux cleaned = -0.000152798 Jy ! Total flux subtracted in 200 components = -0.000152798 Jy ! Clean residual min=-0.007990 max=0.007602 Jy/beam ! Clean residual mean=0.000047 rms=0.002283 Jy/beam ! Combined flux in latest and established models = 0.200294 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 95 components and 0.200294 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.293293Jy sigma=0.001304 ! Fit after self-cal, rms=0.293305Jy sigma=0.001304 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.293305Jy sigma=0.001304 ! Fit after self-cal, rms=0.291680Jy sigma=0.001296 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000181857 Jy ! Component: 100 - total flux cleaned = -0.000689895 Jy ! Component: 150 - total flux cleaned = -0.000972642 Jy ! Component: 200 - total flux cleaned = -0.00122116 Jy ! Total flux subtracted in 200 components = -0.00122116 Jy ! Clean residual min=-0.008328 max=0.006144 Jy/beam ! Clean residual mean=0.000030 rms=0.001987 Jy/beam ! Combined flux in latest and established models = 0.199073 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 122 components and 0.199073 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.291599Jy sigma=0.001295 ! Fit after self-cal, rms=0.291197Jy sigma=0.001294 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.809 x 22.46 at 17.63 degrees (North through East) ! Clean map min=-0.014622 max=0.12523 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.291197Jy sigma=0.001294 ! Fit after self-cal, rms=0.289773Jy sigma=0.001293 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.289773Jy sigma=0.001293 ! Fit after self-cal, rms=0.289574Jy sigma=0.001292 ! Inverting map and beam ! Estimated beam: bmin=3.799 mas, bmaj=22.25 mas, bpa=17.62 degrees ! Estimated noise=1948.77 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0023673 Jy ! Component: 100 - total flux cleaned = 0.00266771 Jy ! Component: 150 - total flux cleaned = 0.00275318 Jy ! Component: 200 - total flux cleaned = 0.00268018 Jy ! Total flux subtracted in 200 components = 0.00268018 Jy ! Clean residual min=-0.007580 max=0.006041 Jy/beam ! Clean residual mean=-0.000025 rms=0.001863 Jy/beam ! Combined flux in latest and established models = 0.201753 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 149 components and 0.201753 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.289489Jy sigma=0.001292 ! Fit after self-cal, rms=0.289402Jy sigma=0.001291 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.289402Jy sigma=0.001291 ! Fit after self-cal, rms=0.290981Jy sigma=0.001289 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.290981Jy sigma=0.001289 ! Fit after self-cal, rms=0.290934Jy sigma=0.001289 ! Inverting map and beam ! Estimated beam: bmin=3.871 mas, bmaj=22.38 mas, bpa=17.5 degrees ! Estimated noise=1911.87 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00430651 Jy ! Component: 100 - total flux cleaned = -0.00562159 Jy ! Component: 150 - total flux cleaned = -0.00588985 Jy ! Component: 200 - total flux cleaned = -0.00600978 Jy ! Total flux subtracted in 200 components = -0.00600978 Jy ! Clean residual min=-0.006755 max=0.006066 Jy/beam ! Clean residual mean=-0.000002 rms=0.001741 Jy/beam ! Combined flux in latest and established models = 0.195743 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 167 components and 0.195743 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.290836Jy sigma=0.001289 ! Fit after self-cal, rms=0.290835Jy sigma=0.001289 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.727 mas, bmaj=33.21 mas, bpa=6.42 degrees ! Estimated noise=2225.39 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00028589 Jy ! Component: 100 - total flux cleaned = -0.000381581 Jy ! Component: 150 - total flux cleaned = -0.000466164 Jy ! Component: 200 - total flux cleaned = -0.000499888 Jy ! Total flux subtracted in 200 components = -0.000499888 Jy ! Clean residual min=-0.005947 max=0.006029 Jy/beam ! Clean residual mean=-0.000008 rms=0.001856 Jy/beam ! Combined flux in latest and established models = 0.195243 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 177 components and 0.195243 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.290833Jy sigma=0.001289 ! Fit after self-cal, rms=0.290808Jy sigma=0.001289 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.174 mas, bmaj=18.18 mas, bpa=17.58 degrees ! Estimated noise=2568.82 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.133574 Jy ! Component: 100 - total flux cleaned = 0.173431 Jy ! Component: 150 - total flux cleaned = 0.192746 Jy ! Component: 200 - total flux cleaned = 0.197844 Jy ! Total flux subtracted in 200 components = 0.197844 Jy ! Clean residual min=-0.011589 max=0.010556 Jy/beam ! Clean residual mean=0.000025 rms=0.003258 Jy/beam ! Combined flux in latest and established models = 0.197844 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 51 model components to the UV plane model. ! The established model now contains 51 components and 0.197844 Jy ! Inverting map and beam ! Estimated beam: bmin=3.871 mas, bmaj=22.38 mas, bpa=17.5 degrees ! Estimated noise=1911.87 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00194733 Jy ! Component: 100 - total flux cleaned = 0.00152234 Jy ! Component: 150 - total flux cleaned = 0.00151073 Jy ! Component: 200 - total flux cleaned = 0.00150559 Jy ! Total flux subtracted in 200 components = 0.00150559 Jy ! Clean residual min=-0.007098 max=0.006796 Jy/beam ! Clean residual mean=-0.000016 rms=0.001866 Jy/beam ! Combined flux in latest and established models = 0.19935 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 76 components and 0.19935 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.727 mas, bmaj=33.21 mas, bpa=6.42 degrees ! Estimated noise=2225.39 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -7.49328e-05 Jy ! Component: 100 - total flux cleaned = -0.00045564 Jy ! Component: 150 - total flux cleaned = -0.000684107 Jy ! Component: 200 - total flux cleaned = -0.000809494 Jy ! Total flux subtracted in 200 components = -0.000809494 Jy ! Clean residual min=-0.006208 max=0.005754 Jy/beam ! Clean residual mean=-0.000029 rms=0.001903 Jy/beam ! Combined flux in latest and established models = 0.19854 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 85 components and 0.19854 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.871 mas, bmaj=22.38 mas, bpa=17.5 degrees ! Estimated noise=1911.87 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000771258 Jy ! Component: 100 - total flux cleaned = 0.0008446 Jy ! Component: 150 - total flux cleaned = 0.000775173 Jy ! Component: 200 - total flux cleaned = 0.000659436 Jy ! Total flux subtracted in 200 components = 0.000659436 Jy ! Clean residual min=-0.006608 max=0.006351 Jy/beam ! Clean residual mean=-0.000015 rms=0.001762 Jy/beam ! Combined flux in latest and established models = 0.1992 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 96 components and 0.1992 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.290837Jy sigma=0.001289 ! Fit after self-cal, rms=0.290810Jy sigma=0.001289 wmodel J0605-3522_S_2002_05_14_yyk\_map.mod ! Writing 96 model components to file: J0605-3522_S_2002_05_14_yyk_map.mod wobs J0605-3522_S_2002_05_14_yyk\_uvs.fits ! Writing UV FITS file: J0605-3522_S_2002_05_14_yyk_uvs.fits wwins J0605-3522_S_2002_05_14_yyk\_map.win ! wwins: Wrote 1 windows to J0605-3522_S_2002_05_14_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000273275 Jy ! Component: 100 - total flux cleaned = 0.00167294 Jy ! Component: 150 - total flux cleaned = 0.00319477 Jy ! Component: 200 - total flux cleaned = 0.00433385 Jy ! Component: 250 - total flux cleaned = 0.00515494 Jy ! Component: 300 - total flux cleaned = 0.00578691 Jy ! Component: 350 - total flux cleaned = 0.00578612 Jy ! Component: 400 - total flux cleaned = 0.00604034 Jy ! Component: 450 - total flux cleaned = 0.00628643 Jy ! Component: 500 - total flux cleaned = 0.00634736 Jy ! Component: 550 - total flux cleaned = 0.00663892 Jy ! Component: 600 - total flux cleaned = 0.00680784 Jy ! Component: 650 - total flux cleaned = 0.00702566 Jy ! Component: 700 - total flux cleaned = 0.00707935 Jy ! Component: 750 - total flux cleaned = 0.00738729 Jy ! Component: 800 - total flux cleaned = 0.00753598 Jy ! Component: 850 - total flux cleaned = 0.00772786 Jy ! Component: 900 - total flux cleaned = 0.00772744 Jy ! Component: 950 - total flux cleaned = 0.00805173 Jy ! Component: 1000 - total flux cleaned = 0.00836846 Jy ! Component: 1050 - total flux cleaned = 0.00867817 Jy ! Component: 1100 - total flux cleaned = 0.00893817 Jy ! Component: 1150 - total flux cleaned = 0.00906618 Jy ! Component: 1200 - total flux cleaned = 0.00940172 Jy ! Component: 1250 - total flux cleaned = 0.00960809 Jy ! Component: 1300 - total flux cleaned = 0.00997319 Jy ! Component: 1350 - total flux cleaned = 0.0103323 Jy ! Component: 1400 - total flux cleaned = 0.0105681 Jy ! Component: 1450 - total flux cleaned = 0.0107623 Jy ! Component: 1500 - total flux cleaned = 0.0111831 Jy ! Component: 1550 - total flux cleaned = 0.0114833 Jy ! Component: 1600 - total flux cleaned = 0.0116686 Jy ! Component: 1650 - total flux cleaned = 0.0119976 Jy ! Component: 1700 - total flux cleaned = 0.012214 Jy ! Component: 1750 - total flux cleaned = 0.0123918 Jy ! Component: 1800 - total flux cleaned = 0.0126717 Jy ! Component: 1850 - total flux cleaned = 0.012844 Jy ! Component: 1900 - total flux cleaned = 0.0129463 Jy ! Component: 1950 - total flux cleaned = 0.0131478 Jy ! Component: 2000 - total flux cleaned = 0.0132471 Jy ! Total flux subtracted in 2048 components = 0.0133125 Jy ! Clean residual min=-0.001944 max=0.001812 Jy/beam ! Clean residual mean=-0.000002 rms=0.000714 Jy/beam ! Combined flux in latest and established models = 0.212512 Jy keep ! Adding 117 model components to the UV plane model. ! The established model now contains 213 components and 0.212512 Jy ![Exited script file: muppet] wmap "J0605-3522_S_2002_05_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.871 x 22.38 at 17.5 degrees (North through East) ! Clean map min=-0.01014 max=0.1269 Jy/beam ! Writing clean map to FITS file: J0605-3522_S_2002_05_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.126896 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000708912 device "J0605-3522_S_2002_05_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J0605-3522_S_2002_05_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.67596 1.67596 3.35193 6.70385 13.4077 26.8154 53.6308 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0021 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.126 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.871 x 22.38 at 17.5 degrees (North through East) ! Clean map min=-0.01014 max=0.1269 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0605-3522_S_2002_05_14_yyk\_map.gif/gif" ! Attempting to open device: 'J0605-3522_S_2002_05_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0605-3522_S_2002_05_14_yyk_uvs.log closed on Tue Jun 26 22:20:24 2007