! Started logfile: J0604-4225_S_2002_01_31_yyk_uvs.log on Tue Jun 26 22:19:57 2007 obs J0604-4225_S_2002_01_31_yyk_uva.fits ! Reading UV FITS file: J0604-4225_S_2002_01_31_yyk_uva.fits ! AN table 1: 39 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.577208 visibilities/baseline/integration-bin. ! Found source: J0604-4225 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22947e+09 8e+06 1 8e+06 ! 02 2 2.25947e+09 8e+06 1 8e+06 ! 03 3 2.34947e+09 8e+06 1 8e+06 ! 04 4 2.36947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1224 lines of history. ! ! Reading 4052 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0604-4225_S_2002_01_31_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.268737 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.37 mas, bmaj=6.621 mas, bpa=1.921 degrees ! Estimated noise=2501.41 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.14069 Jy ! Component: 100 - total flux cleaned = 0.168748 Jy ! Total flux subtracted in 100 components = 0.168748 Jy ! Clean residual min=-0.016124 max=0.024948 Jy/beam ! Clean residual mean=0.000151 rms=0.005530 Jy/beam ! Combined flux in latest and established models = 0.168748 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.168748 Jy ! ! Correcting IF 1. ! A total of 95 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 132 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 95 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 95 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.211380Jy sigma=0.001207 ! Fit after self-cal, rms=0.211194Jy sigma=0.001206 ! Inverting map and beam ! Estimated beam: bmin=2.37 mas, bmaj=6.621 mas, bpa=1.921 degrees ! Estimated noise=2511.17 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.843 mas, bmaj=8.083 mas, bpa=-0.05148 degrees ! Estimated noise=1879.17 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0139454 Jy ! Component: 100 - total flux cleaned = 0.0157791 Jy ! Component: 150 - total flux cleaned = 0.0162912 Jy ! Component: 200 - total flux cleaned = 0.0165848 Jy ! Total flux subtracted in 200 components = 0.0165848 Jy ! Clean residual min=-0.008785 max=0.016030 Jy/beam ! Clean residual mean=0.000176 rms=0.003833 Jy/beam ! Combined flux in latest and established models = 0.185332 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 23 components and 0.185332 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.210870Jy sigma=0.001202 ! Fit after self-cal, rms=0.210860Jy sigma=0.001202 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.843 x 8.083 at -0.05148 degrees (North through East) ! Clean map min=-0.0085731 max=0.15696 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.210860Jy sigma=0.001202 ! Fit after self-cal, rms=0.211020Jy sigma=0.001203 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.211020Jy sigma=0.001203 ! Fit after self-cal, rms=0.211021Jy sigma=0.001203 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.843 mas, bmaj=8.092 mas, bpa=-0.1243 degrees ! Estimated noise=1881.46 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000642276 Jy ! Component: 100 - total flux cleaned = 0.000883212 Jy ! Component: 150 - total flux cleaned = 0.0010973 Jy ! Component: 200 - total flux cleaned = 0.0013129 Jy ! Total flux subtracted in 200 components = 0.0013129 Jy ! Clean residual min=-0.008787 max=0.015163 Jy/beam ! Clean residual mean=0.000170 rms=0.003749 Jy/beam ! Combined flux in latest and established models = 0.186645 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 30 components and 0.186645 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.210930Jy sigma=0.001202 ! Fit after self-cal, rms=0.210916Jy sigma=0.001202 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.210916Jy sigma=0.001202 ! Fit after self-cal, rms=0.210025Jy sigma=0.001197 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000378368 Jy ! Component: 100 - total flux cleaned = 0.000591354 Jy ! Component: 150 - total flux cleaned = 0.000781084 Jy ! Component: 200 - total flux cleaned = 0.000948537 Jy ! Total flux subtracted in 200 components = 0.000948537 Jy ! Clean residual min=-0.008696 max=0.014985 Jy/beam ! Clean residual mean=0.000171 rms=0.003695 Jy/beam ! Combined flux in latest and established models = 0.187594 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 31 components and 0.187594 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.209961Jy sigma=0.001197 ! Fit after self-cal, rms=0.209886Jy sigma=0.001197 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.843 x 8.092 at -0.1243 degrees (North through East) ! Clean map min=-0.008596 max=0.15589 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.209886Jy sigma=0.001197 ! Fit after self-cal, rms=0.209886Jy sigma=0.001197 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.209886Jy sigma=0.001197 ! Fit after self-cal, rms=0.209892Jy sigma=0.001197 ! Inverting map and beam ! Estimated beam: bmin=2.843 mas, bmaj=8.092 mas, bpa=-0.1243 degrees ! Estimated noise=1881.46 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000190319 Jy ! Component: 100 - total flux cleaned = 0.000271903 Jy ! Component: 150 - total flux cleaned = 0.000274048 Jy ! Component: 200 - total flux cleaned = 0.000270984 Jy ! Total flux subtracted in 200 components = 0.000270984 Jy ! Clean residual min=-0.008692 max=0.014868 Jy/beam ! Clean residual mean=0.000169 rms=0.003656 Jy/beam ! Combined flux in latest and established models = 0.187865 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 36 components and 0.187865 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.209835Jy sigma=0.001197 ! Fit after self-cal, rms=0.209841Jy sigma=0.001197 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.209841Jy sigma=0.001197 ! Fit after self-cal, rms=0.209841Jy sigma=0.001197 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.209841Jy sigma=0.001197 ! Fit after self-cal, rms=0.209848Jy sigma=0.001197 ! Inverting map and beam ! Estimated beam: bmin=2.843 mas, bmaj=8.092 mas, bpa=-0.1243 degrees ! Estimated noise=1881.46 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000171808 Jy ! Component: 100 - total flux cleaned = 0.000169172 Jy ! Component: 150 - total flux cleaned = 0.000176013 Jy ! Component: 200 - total flux cleaned = 0.000250622 Jy ! Total flux subtracted in 200 components = 0.000250622 Jy ! Clean residual min=-0.008703 max=0.014874 Jy/beam ! Clean residual mean=0.000168 rms=0.003634 Jy/beam ! Combined flux in latest and established models = 0.188115 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 39 components and 0.188115 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.209798Jy sigma=0.001196 ! Fit after self-cal, rms=0.209801Jy sigma=0.001196 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.229 mas, bmaj=32.01 mas, bpa=4.782 degrees ! Estimated noise=2513.44 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00374527 Jy ! Component: 100 - total flux cleaned = 0.00394224 Jy ! Component: 150 - total flux cleaned = 0.00403229 Jy ! Component: 200 - total flux cleaned = 0.00412911 Jy ! Total flux subtracted in 200 components = 0.00412911 Jy ! Clean residual min=-0.011433 max=0.016565 Jy/beam ! Clean residual mean=0.000339 rms=0.005092 Jy/beam ! Combined flux in latest and established models = 0.192245 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 43 components and 0.192245 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.209833Jy sigma=0.001197 ! Fit after self-cal, rms=0.209830Jy sigma=0.001196 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.37 mas, bmaj=6.621 mas, bpa=1.921 degrees ! Estimated noise=2523.95 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.142689 Jy ! Component: 100 - total flux cleaned = 0.170156 Jy ! Component: 150 - total flux cleaned = 0.177489 Jy ! Component: 200 - total flux cleaned = 0.178675 Jy ! Total flux subtracted in 200 components = 0.178675 Jy ! Clean residual min=-0.015021 max=0.020802 Jy/beam ! Clean residual mean=0.000146 rms=0.004958 Jy/beam ! Combined flux in latest and established models = 0.178674 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.178674 Jy ! Inverting map and beam ! Estimated beam: bmin=2.843 mas, bmaj=8.092 mas, bpa=-0.1243 degrees ! Estimated noise=1881.46 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (7.5, 14). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0189443 Jy ! Component: 100 - total flux cleaned = 0.023155 Jy ! Component: 150 - total flux cleaned = 0.0235573 Jy ! Component: 200 - total flux cleaned = 0.0237239 Jy ! Total flux subtracted in 200 components = 0.0237239 Jy ! Clean residual min=-0.009254 max=0.012611 Jy/beam ! Clean residual mean=0.000121 rms=0.002935 Jy/beam ! Combined flux in latest and established models = 0.202398 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 46 components and 0.202398 Jy ! Inverting map ! Added new window around map position (-7.5, -15). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0101605 Jy ! Component: 100 - total flux cleaned = 0.0107133 Jy ! Component: 150 - total flux cleaned = 0.0109378 Jy ! Component: 200 - total flux cleaned = 0.0113123 Jy ! Total flux subtracted in 200 components = 0.0113123 Jy ! Clean residual min=-0.008372 max=0.009010 Jy/beam ! Clean residual mean=0.000087 rms=0.002427 Jy/beam ! Combined flux in latest and established models = 0.213711 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 63 components and 0.213711 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.229 mas, bmaj=32.01 mas, bpa=4.782 degrees ! Estimated noise=2513.44 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000501118 Jy ! Component: 100 - total flux cleaned = 0.000507386 Jy ! Component: 150 - total flux cleaned = 0.000511081 Jy ! Component: 200 - total flux cleaned = 0.000293661 Jy ! Total flux subtracted in 200 components = 0.000293661 Jy ! Clean residual min=-0.009933 max=0.009034 Jy/beam ! Clean residual mean=0.000200 rms=0.003470 Jy/beam ! Combined flux in latest and established models = 0.214004 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 78 components and 0.214004 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.843 mas, bmaj=8.092 mas, bpa=-0.1243 degrees ! Estimated noise=1881.46 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00068995 Jy ! Component: 100 - total flux cleaned = 0.000159889 Jy ! Component: 150 - total flux cleaned = -0.000188091 Jy ! Component: 200 - total flux cleaned = -0.000399738 Jy ! Total flux subtracted in 200 components = -0.000399738 Jy ! Clean residual min=-0.008570 max=0.008379 Jy/beam ! Clean residual mean=0.000093 rms=0.002320 Jy/beam ! Combined flux in latest and established models = 0.213605 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 99 components and 0.213605 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.207385Jy sigma=0.001186 ! Fit after self-cal, rms=0.207391Jy sigma=0.001186 wmodel J0604-4225_S_2002_01_31_yyk\_map.mod ! Writing 99 model components to file: J0604-4225_S_2002_01_31_yyk_map.mod wobs J0604-4225_S_2002_01_31_yyk\_uvs.fits ! Writing UV FITS file: J0604-4225_S_2002_01_31_yyk_uvs.fits wwins J0604-4225_S_2002_01_31_yyk\_map.win ! wwins: Wrote 3 windows to J0604-4225_S_2002_01_31_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00102408 Jy ! Component: 100 - total flux cleaned = -0.00143286 Jy ! Component: 150 - total flux cleaned = -0.000849319 Jy ! Component: 200 - total flux cleaned = -0.0003072 Jy ! Component: 250 - total flux cleaned = 0.000407844 Jy ! Component: 300 - total flux cleaned = 0.000884765 Jy ! Component: 350 - total flux cleaned = 0.00143607 Jy ! Component: 400 - total flux cleaned = 0.00187919 Jy ! Component: 450 - total flux cleaned = 0.00239505 Jy ! Component: 500 - total flux cleaned = 0.00289315 Jy ! Component: 550 - total flux cleaned = 0.0032946 Jy ! Component: 600 - total flux cleaned = 0.0037624 Jy ! Component: 650 - total flux cleaned = 0.00413968 Jy ! Component: 700 - total flux cleaned = 0.00450473 Jy ! Component: 750 - total flux cleaned = 0.00443277 Jy ! Component: 800 - total flux cleaned = 0.00464139 Jy ! Component: 850 - total flux cleaned = 0.00470882 Jy ! Component: 900 - total flux cleaned = 0.00484206 Jy ! Component: 950 - total flux cleaned = 0.00490829 Jy ! Component: 1000 - total flux cleaned = 0.00516326 Jy ! Component: 1050 - total flux cleaned = 0.00528897 Jy ! Component: 1100 - total flux cleaned = 0.00565792 Jy ! Component: 1150 - total flux cleaned = 0.00595802 Jy ! Component: 1200 - total flux cleaned = 0.00601669 Jy ! Component: 1250 - total flux cleaned = 0.00619192 Jy ! Component: 1300 - total flux cleaned = 0.00642174 Jy ! Component: 1350 - total flux cleaned = 0.00653412 Jy ! Component: 1400 - total flux cleaned = 0.00675606 Jy ! Component: 1450 - total flux cleaned = 0.00681034 Jy ! Component: 1500 - total flux cleaned = 0.00702601 Jy ! Component: 1550 - total flux cleaned = 0.00718452 Jy ! Component: 1600 - total flux cleaned = 0.00734113 Jy ! Component: 1650 - total flux cleaned = 0.00759934 Jy ! Component: 1700 - total flux cleaned = 0.00800753 Jy ! Component: 1750 - total flux cleaned = 0.00835996 Jy ! Component: 1800 - total flux cleaned = 0.00850966 Jy ! Component: 1850 - total flux cleaned = 0.0088556 Jy ! Component: 1900 - total flux cleaned = 0.00909987 Jy ! Component: 1950 - total flux cleaned = 0.00934185 Jy ! Component: 2000 - total flux cleaned = 0.00948534 Jy ! Total flux subtracted in 2048 components = 0.0095807 Jy ! Clean residual min=-0.003466 max=0.002985 Jy/beam ! Clean residual mean=0.000090 rms=0.000935 Jy/beam ! Combined flux in latest and established models = 0.223185 Jy keep ! Adding 94 model components to the UV plane model. ! The established model now contains 193 components and 0.223185 Jy ![Exited script file: muppet] wmap "J0604-4225_S_2002_01_31_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.843 x 8.092 at -0.1243 degrees (North through East) ! Clean map min=-0.006638 max=0.14008 Jy/beam ! Writing clean map to FITS file: J0604-4225_S_2002_01_31_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.140084 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000950096 device "J0604-4225_S_2002_01_31_yyk\_map.eps/VPS" ! Attempting to open device: 'J0604-4225_S_2002_01_31_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.0347 2.0347 4.0694 8.1388 16.2776 32.5552 65.1104 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0028 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.14 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.843 x 8.092 at -0.1243 degrees (North through East) ! Clean map min=-0.006638 max=0.14008 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0604-4225_S_2002_01_31_yyk\_map.gif/gif" ! Attempting to open device: 'J0604-4225_S_2002_01_31_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0604-4225_S_2002_01_31_yyk_uvs.log closed on Tue Jun 26 22:20:04 2007