! Started logfile: J0502-3541_S_2002_05_14_yyk_uvs.log on Tue Jun 26 22:13:56 2007 obs J0502-3541_S_2002_05_14_yyk_uva.fits ! Reading UV FITS file: J0502-3541_S_2002_05_14_yyk_uva.fits ! AN table 1: 35 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.455873 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0502-3541 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22947e+09 8e+06 1 8e+06 ! 02 2 2.25947e+09 8e+06 1 8e+06 ! 03 3 2.34947e+09 8e+06 1 8e+06 ! 04 4 2.36947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 2872 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0502-3541_S_2002_05_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.273012 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.868 mas, bmaj=47.73 mas, bpa=26.14 degrees ! Estimated noise=2954.93 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0.5). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0805099 Jy ! Component: 100 - total flux cleaned = 0.0988527 Jy ! Total flux subtracted in 100 components = 0.0988527 Jy ! Clean residual min=-0.014438 max=0.015447 Jy/beam ! Clean residual mean=0.000389 rms=0.004780 Jy/beam ! Combined flux in latest and established models = 0.0988527 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0988527 Jy ! ! Correcting IF 1. ! A total of 108 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 143 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 108 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 108 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.254695Jy sigma=0.001450 ! Fit after self-cal, rms=0.254430Jy sigma=0.001447 ! Inverting map and beam ! Estimated beam: bmin=2.868 mas, bmaj=47.73 mas, bpa=26.14 degrees ! Estimated noise=2954.93 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.75 mas, bmaj=47.07 mas, bpa=26.05 degrees ! Estimated noise=2262 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0129531 Jy ! Component: 100 - total flux cleaned = 0.0188887 Jy ! Component: 150 - total flux cleaned = 0.0227168 Jy ! Component: 200 - total flux cleaned = 0.0257034 Jy ! Total flux subtracted in 200 components = 0.0257034 Jy ! Clean residual min=-0.008213 max=0.011064 Jy/beam ! Clean residual mean=0.000324 rms=0.002983 Jy/beam ! Combined flux in latest and established models = 0.124556 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 72 model components to the UV plane model. ! The established model now contains 87 components and 0.124556 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.253484Jy sigma=0.001441 ! Fit after self-cal, rms=0.253437Jy sigma=0.001441 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.75 x 47.07 at 26.05 degrees (North through East) ! Clean map min=-0.0082436 max=0.094031 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Fit before self-cal, rms=0.253437Jy sigma=0.001441 ! Fit after self-cal, rms=0.253437Jy sigma=0.001441 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.253437Jy sigma=0.001441 ! Fit after self-cal, rms=0.253436Jy sigma=0.001441 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.75 mas, bmaj=47.07 mas, bpa=26.05 degrees ! Estimated noise=2262 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000988919 Jy ! Component: 100 - total flux cleaned = 0.00164729 Jy ! Component: 150 - total flux cleaned = 0.00224841 Jy ! Component: 200 - total flux cleaned = 0.00279639 Jy ! Total flux subtracted in 200 components = 0.00279639 Jy ! Clean residual min=-0.008271 max=0.009713 Jy/beam ! Clean residual mean=0.000299 rms=0.002669 Jy/beam ! Combined flux in latest and established models = 0.127352 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 34 model components to the UV plane model. ! The established model now contains 110 components and 0.127352 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.253176Jy sigma=0.001440 ! Fit after self-cal, rms=0.253163Jy sigma=0.001439 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.253163Jy sigma=0.001439 ! Fit after self-cal, rms=0.250350Jy sigma=0.001420 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00476914 Jy ! Component: 100 - total flux cleaned = 0.00526766 Jy ! Component: 150 - total flux cleaned = 0.00527292 Jy ! Component: 200 - total flux cleaned = 0.00590568 Jy ! Total flux subtracted in 200 components = 0.00590568 Jy ! Clean residual min=-0.006949 max=0.009466 Jy/beam ! Clean residual mean=0.000305 rms=0.002595 Jy/beam ! Combined flux in latest and established models = 0.133258 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 125 components and 0.133258 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.249840Jy sigma=0.001417 ! Fit after self-cal, rms=0.249383Jy sigma=0.001415 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.75 x 47.07 at 26.05 degrees (North through East) ! Clean map min=-0.007847 max=0.10315 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.249383Jy sigma=0.001415 ! Fit after self-cal, rms=0.244521Jy sigma=0.001414 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.244521Jy sigma=0.001414 ! Fit after self-cal, rms=0.244434Jy sigma=0.001413 ! Inverting map and beam ! Estimated beam: bmin=3.756 mas, bmaj=46.9 mas, bpa=26.02 degrees ! Estimated noise=2180.7 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000762124 Jy ! Component: 100 - total flux cleaned = -0.000468709 Jy ! Component: 150 - total flux cleaned = -0.00178559 Jy ! Component: 200 - total flux cleaned = -0.00260601 Jy ! Total flux subtracted in 200 components = -0.00260601 Jy ! Clean residual min=-0.005425 max=0.008096 Jy/beam ! Clean residual mean=0.000194 rms=0.001938 Jy/beam ! Combined flux in latest and established models = 0.130652 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 157 components and 0.130652 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.244316Jy sigma=0.001412 ! Fit after self-cal, rms=0.244291Jy sigma=0.001412 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.244291Jy sigma=0.001412 ! Fit after self-cal, rms=0.244165Jy sigma=0.001412 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.244165Jy sigma=0.001412 ! Fit after self-cal, rms=0.244163Jy sigma=0.001412 ! Inverting map and beam ! Estimated beam: bmin=3.762 mas, bmaj=46.49 mas, bpa=25.99 degrees ! Estimated noise=2166.09 mJy/beam. ! Added new window around map position (63.5, -29.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00780987 Jy ! Component: 100 - total flux cleaned = 0.00944385 Jy ! Component: 150 - total flux cleaned = 0.00999805 Jy ! Component: 200 - total flux cleaned = 0.00971083 Jy ! Total flux subtracted in 200 components = 0.00971083 Jy ! Clean residual min=-0.005182 max=0.005699 Jy/beam ! Clean residual mean=0.000110 rms=0.001303 Jy/beam ! Combined flux in latest and established models = 0.140363 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 32 model components to the UV plane model. ! The established model now contains 189 components and 0.140363 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.243728Jy sigma=0.001410 ! Fit after self-cal, rms=0.243681Jy sigma=0.001410 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=10.5 mas, bmaj=57.72 mas, bpa=17.58 degrees ! Estimated noise=2494.76 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00133032 Jy ! Component: 100 - total flux cleaned = 0.00176823 Jy ! Component: 150 - total flux cleaned = 0.00205505 Jy ! Component: 200 - total flux cleaned = 0.00229882 Jy ! Total flux subtracted in 200 components = 0.00229882 Jy ! Clean residual min=-0.002556 max=0.004490 Jy/beam ! Clean residual mean=0.000092 rms=0.001057 Jy/beam ! Combined flux in latest and established models = 0.142662 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 82 model components to the UV plane model. ! The established model now contains 266 components and 0.142662 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.243597Jy sigma=0.001409 ! Fit after self-cal, rms=0.243574Jy sigma=0.001409 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.876 mas, bmaj=47.49 mas, bpa=26.13 degrees ! Estimated noise=2851.94 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0865188 Jy ! Component: 100 - total flux cleaned = 0.105385 Jy ! Component: 150 - total flux cleaned = 0.113561 Jy ! Component: 200 - total flux cleaned = 0.118334 Jy ! Total flux subtracted in 200 components = 0.118334 Jy ! Clean residual min=-0.007723 max=0.012069 Jy/beam ! Clean residual mean=0.000262 rms=0.003023 Jy/beam ! Combined flux in latest and established models = 0.118334 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.118334 Jy ! Inverting map and beam ! Estimated beam: bmin=3.762 mas, bmaj=46.49 mas, bpa=25.99 degrees ! Estimated noise=2166.09 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0113988 Jy ! Component: 100 - total flux cleaned = 0.0169453 Jy ! Component: 150 - total flux cleaned = 0.0212069 Jy ! Component: 200 - total flux cleaned = 0.0242147 Jy ! Total flux subtracted in 200 components = 0.0242147 Jy ! Clean residual min=-0.005007 max=0.005309 Jy/beam ! Clean residual mean=0.000116 rms=0.001539 Jy/beam ! Combined flux in latest and established models = 0.142549 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 74 components and 0.142549 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=10.5 mas, bmaj=57.72 mas, bpa=17.58 degrees ! Estimated noise=2494.76 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00155596 Jy ! Component: 100 - total flux cleaned = 0.00316499 Jy ! Component: 150 - total flux cleaned = 0.00379485 Jy ! Component: 200 - total flux cleaned = 0.00444837 Jy ! Total flux subtracted in 200 components = 0.00444837 Jy ! Clean residual min=-0.003248 max=0.004531 Jy/beam ! Clean residual mean=0.000098 rms=0.001122 Jy/beam ! Combined flux in latest and established models = 0.146997 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 131 components and 0.146997 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.762 mas, bmaj=46.49 mas, bpa=25.99 degrees ! Estimated noise=2166.09 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -7.44667e-06 Jy ! Component: 100 - total flux cleaned = 0.000137908 Jy ! Component: 150 - total flux cleaned = 0.000423937 Jy ! Component: 200 - total flux cleaned = 0.00068698 Jy ! Total flux subtracted in 200 components = 0.00068698 Jy ! Clean residual min=-0.004911 max=0.004673 Jy/beam ! Clean residual mean=0.000074 rms=0.001135 Jy/beam ! Combined flux in latest and established models = 0.147684 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 34 model components to the UV plane model. ! The established model now contains 157 components and 0.147684 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.243608Jy sigma=0.001409 ! Fit after self-cal, rms=0.243586Jy sigma=0.001409 wmodel J0502-3541_S_2002_05_14_yyk\_map.mod ! Writing 157 model components to file: J0502-3541_S_2002_05_14_yyk_map.mod wobs J0502-3541_S_2002_05_14_yyk\_uvs.fits ! Writing UV FITS file: J0502-3541_S_2002_05_14_yyk_uvs.fits wwins J0502-3541_S_2002_05_14_yyk\_map.win ! wwins: Wrote 2 windows to J0502-3541_S_2002_05_14_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00130146 Jy ! Component: 100 - total flux cleaned = 0.0020939 Jy ! Component: 150 - total flux cleaned = 0.00276266 Jy ! Component: 200 - total flux cleaned = 0.00332586 Jy ! Component: 250 - total flux cleaned = 0.00326623 Jy ! Component: 300 - total flux cleaned = 0.00315076 Jy ! Component: 350 - total flux cleaned = 0.00292721 Jy ! Component: 400 - total flux cleaned = 0.00298095 Jy ! Component: 450 - total flux cleaned = 0.00292723 Jy ! Component: 500 - total flux cleaned = 0.00277084 Jy ! Component: 550 - total flux cleaned = 0.00261714 Jy ! Component: 600 - total flux cleaned = 0.00256727 Jy ! Component: 650 - total flux cleaned = 0.00251734 Jy ! Component: 700 - total flux cleaned = 0.0025173 Jy ! Component: 750 - total flux cleaned = 0.00246858 Jy ! Component: 800 - total flux cleaned = 0.00242034 Jy ! Component: 850 - total flux cleaned = 0.00237257 Jy ! Component: 900 - total flux cleaned = 0.00222879 Jy ! Component: 950 - total flux cleaned = 0.00198894 Jy ! Component: 1000 - total flux cleaned = 0.00170142 Jy ! Component: 1050 - total flux cleaned = 0.00146199 Jy ! Component: 1100 - total flux cleaned = 0.00117437 Jy ! Component: 1150 - total flux cleaned = 0.000934858 Jy ! Component: 1200 - total flux cleaned = 0.000647602 Jy ! Component: 1250 - total flux cleaned = 0.000360029 Jy ! Component: 1300 - total flux cleaned = 7.19301e-05 Jy ! Component: 1350 - total flux cleaned = -0.000168973 Jy ! Component: 1400 - total flux cleaned = -0.000458579 Jy ! Component: 1450 - total flux cleaned = -0.000700929 Jy ! Component: 1500 - total flux cleaned = -0.000895608 Jy ! Component: 1550 - total flux cleaned = -0.00099361 Jy ! Component: 1600 - total flux cleaned = -0.00119018 Jy ! Component: 1650 - total flux cleaned = -0.00143769 Jy ! Component: 1700 - total flux cleaned = -0.00168704 Jy ! Component: 1750 - total flux cleaned = -0.00188759 Jy ! Component: 1800 - total flux cleaned = -0.00214059 Jy ! Component: 1850 - total flux cleaned = -0.00239529 Jy ! Component: 1900 - total flux cleaned = -0.0027032 Jy ! Component: 1950 - total flux cleaned = -0.00296225 Jy ! Component: 2000 - total flux cleaned = -0.00327605 Jy ! Total flux subtracted in 2048 components = -0.00354007 Jy ! Clean residual min=-0.002930 max=0.002935 Jy/beam ! Clean residual mean=0.000004 rms=0.001054 Jy/beam ! Combined flux in latest and established models = 0.144144 Jy keep ! Adding 62 model components to the UV plane model. ! The established model now contains 218 components and 0.144144 Jy ![Exited script file: muppet] wmap "J0502-3541_S_2002_05_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.762 x 46.49 at 25.99 degrees (North through East) ! Clean map min=-0.0070767 max=0.10151 Jy/beam ! Writing clean map to FITS file: J0502-3541_S_2002_05_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.101505 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0010048 device "J0502-3541_S_2002_05_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J0502-3541_S_2002_05_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.9697 2.9697 5.9394 11.8788 23.7576 47.5152 95.0303 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.003 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.101 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.762 x 46.49 at 25.99 degrees (North through East) ! Clean map min=-0.0070767 max=0.10151 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0502-3541_S_2002_05_14_yyk\_map.gif/gif" ! Attempting to open device: 'J0502-3541_S_2002_05_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0502-3541_S_2002_05_14_yyk_uvs.log closed on Tue Jun 26 22:14:05 2007