! Started logfile: J0447-2203_S_2002_05_14_yyk_uvs.log on Tue Jun 26 22:12:27 2007 obs J0447-2203_S_2002_05_14_yyk_uva.fits ! Reading UV FITS file: J0447-2203_S_2002_05_14_yyk_uva.fits ! AN table 1: 72 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.644753 visibilities/baseline/integration-bin. ! Found source: J0447-2203 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22947e+09 8e+06 1 8e+06 ! 02 2 2.25947e+09 8e+06 1 8e+06 ! 03 3 2.34947e+09 8e+06 1 8e+06 ! 04 4 2.36947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 8356 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0447-2203_S_2002_05_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.456186 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.068 mas, bmaj=13.37 mas, bpa=22.93 degrees ! Estimated noise=2145.7 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.231518 Jy ! Component: 100 - total flux cleaned = 0.350638 Jy ! Total flux subtracted in 100 components = 0.350638 Jy ! Clean residual min=-0.039216 max=0.080138 Jy/beam ! Clean residual mean=0.002201 rms=0.017350 Jy/beam ! Combined flux in latest and established models = 0.350638 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 0.350638 Jy ! ! Correcting IF 1. ! A total of 139 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 175 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 154 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 287 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.333605Jy sigma=0.002160 ! Fit after self-cal, rms=0.322640Jy sigma=0.002088 ! Inverting map and beam ! Estimated beam: bmin=3.068 mas, bmaj=13.37 mas, bpa=22.93 degrees ! Estimated noise=2145.8 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.796 mas, bmaj=15.07 mas, bpa=20.94 degrees ! Estimated noise=1270.14 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.148415 Jy ! Component: 100 - total flux cleaned = 0.228191 Jy ! Component: 150 - total flux cleaned = 0.273773 Jy ! Component: 200 - total flux cleaned = 0.301167 Jy ! Total flux subtracted in 200 components = 0.301167 Jy ! Clean residual min=-0.036150 max=0.111944 Jy/beam ! Clean residual mean=0.003178 rms=0.020224 Jy/beam ! Combined flux in latest and established models = 0.651805 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 56 model components to the UV plane model. ! The established model now contains 83 components and 0.651805 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.284729Jy sigma=0.001740 ! Fit after self-cal, rms=0.280659Jy sigma=0.001714 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.796 x 15.07 at 20.94 degrees (North through East) ! Clean map min=-0.036721 max=0.25613 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.760676 ! Telescope amplitude corrections in sub-array 1: ! BR 0.82 FD 1.00 HN 1.22 KP 0.82 ! LA 0.83 NL 4.42 OV 1.13 PT 0.94 ! SC 0.97 MK 1.00* ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.789986 ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 0.87 HN 1.07 KP 1.00* ! LA 0.89 NL 3.97 OV 1.22 PT 0.88 ! SC 0.91 MK 1.00* ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.601391 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.88 HN 1.31 KP 0.90 ! LA 0.85 NL 7.37 OV 1.44 PT 1.10 ! SC 0.80 MK 1.00* ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.84901 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.77 HN 0.96 KP 1.00* ! LA 0.80 NL 3.09 OV 1.21 PT 0.91 ! SC 1.06 MK 1.00* ! ! ! Fit before self-cal, rms=0.280659Jy sigma=0.001714 ! Fit after self-cal, rms=0.351420Jy sigma=0.002937 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.351420Jy sigma=0.002937 ! Fit after self-cal, rms=0.355401Jy sigma=0.002934 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.483 mas, bmaj=18.72 mas, bpa=23.92 degrees ! Estimated noise=688.242 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.184054 Jy ! Component: 100 - total flux cleaned = -0.250827 Jy ! Component: 150 - total flux cleaned = -0.279123 Jy ! Component: 200 - total flux cleaned = -0.291476 Jy ! Total flux subtracted in 200 components = -0.291476 Jy ! Clean residual min=-0.015452 max=0.017185 Jy/beam ! Clean residual mean=0.000752 rms=0.005161 Jy/beam ! Combined flux in latest and established models = 0.360329 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 67 model components to the UV plane model. ! The established model now contains 137 components and 0.360329 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.310596Jy sigma=0.001570 ! Fit after self-cal, rms=0.308142Jy sigma=0.001560 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.308142Jy sigma=0.001560 ! Fit after self-cal, rms=0.305491Jy sigma=0.001544 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00574873 Jy ! Component: 100 - total flux cleaned = -0.00545979 Jy ! Component: 150 - total flux cleaned = -0.00572148 Jy ! Component: 200 - total flux cleaned = -0.00594104 Jy ! Total flux subtracted in 200 components = -0.00594104 Jy ! Clean residual min=-0.013472 max=0.016167 Jy/beam ! Clean residual mean=0.000844 rms=0.004922 Jy/beam ! Combined flux in latest and established models = 0.354388 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 147 components and 0.354388 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.304868Jy sigma=0.001531 ! Fit after self-cal, rms=0.303822Jy sigma=0.001528 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.483 x 18.72 at 23.92 degrees (North through East) ! Clean map min=-0.013634 max=0.12189 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.303822Jy sigma=0.001528 ! Fit after self-cal, rms=0.429537Jy sigma=0.001318 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.429537Jy sigma=0.001318 ! Fit after self-cal, rms=0.429591Jy sigma=0.001317 ! Inverting map and beam ! Estimated beam: bmin=3.546 mas, bmaj=21.21 mas, bpa=24.24 degrees ! Estimated noise=657.162 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00794073 Jy ! Component: 100 - total flux cleaned = 0.00903109 Jy ! Component: 150 - total flux cleaned = 0.00986277 Jy ! Component: 200 - total flux cleaned = 0.010737 Jy ! Total flux subtracted in 200 components = 0.010737 Jy ! Clean residual min=-0.008541 max=0.012142 Jy/beam ! Clean residual mean=0.000422 rms=0.003401 Jy/beam ! Combined flux in latest and established models = 0.365125 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 164 components and 0.365125 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.429252Jy sigma=0.001294 ! Fit after self-cal, rms=0.428720Jy sigma=0.001292 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.428720Jy sigma=0.001292 ! Fit after self-cal, rms=0.466386Jy sigma=0.001283 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.466386Jy sigma=0.001283 ! Fit after self-cal, rms=0.466385Jy sigma=0.001283 ! Inverting map and beam ! Estimated beam: bmin=3.458 mas, bmaj=22.98 mas, bpa=24.5 degrees ! Estimated noise=643.348 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00368521 Jy ! Component: 100 - total flux cleaned = 0.00493112 Jy ! Component: 150 - total flux cleaned = 0.00541509 Jy ! Component: 200 - total flux cleaned = 0.00582817 Jy ! Total flux subtracted in 200 components = 0.00582817 Jy ! Clean residual min=-0.008186 max=0.010472 Jy/beam ! Clean residual mean=0.000345 rms=0.002848 Jy/beam ! Combined flux in latest and established models = 0.370953 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 32 model components to the UV plane model. ! The established model now contains 170 components and 0.370953 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.466286Jy sigma=0.001274 ! Fit after self-cal, rms=0.465922Jy sigma=0.001274 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.586 mas, bmaj=28.54 mas, bpa=23.46 degrees ! Estimated noise=776.974 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00350854 Jy ! Component: 100 - total flux cleaned = 0.00386836 Jy ! Component: 150 - total flux cleaned = 0.00402826 Jy ! Component: 200 - total flux cleaned = 0.00416344 Jy ! Total flux subtracted in 200 components = 0.00416344 Jy ! Clean residual min=-0.009814 max=0.014109 Jy/beam ! Clean residual mean=0.000449 rms=0.003649 Jy/beam ! Combined flux in latest and established models = 0.375116 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 173 components and 0.375116 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.465936Jy sigma=0.001273 ! Fit after self-cal, rms=0.465690Jy sigma=0.001272 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.801 mas, bmaj=16.26 mas, bpa=24.4 degrees ! Estimated noise=1265.09 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.142642 Jy ! Component: 100 - total flux cleaned = 0.217123 Jy ! Component: 150 - total flux cleaned = 0.264251 Jy ! Component: 200 - total flux cleaned = 0.296932 Jy ! Total flux subtracted in 200 components = 0.296932 Jy ! Clean residual min=-0.016276 max=0.031199 Jy/beam ! Clean residual mean=0.000779 rms=0.006001 Jy/beam ! Combined flux in latest and established models = 0.296932 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 46 model components to the UV plane model. ! The established model now contains 46 components and 0.296932 Jy ! Inverting map and beam ! Estimated beam: bmin=3.458 mas, bmaj=22.98 mas, bpa=24.5 degrees ! Estimated noise=643.348 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0341588 Jy ! Component: 100 - total flux cleaned = 0.0510878 Jy ! Component: 150 - total flux cleaned = 0.0557031 Jy ! Component: 200 - total flux cleaned = 0.0590902 Jy ! Total flux subtracted in 200 components = 0.0590902 Jy ! Clean residual min=-0.010851 max=0.017758 Jy/beam ! Clean residual mean=0.000710 rms=0.004375 Jy/beam ! Combined flux in latest and established models = 0.356022 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 75 components and 0.356022 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.586 mas, bmaj=28.54 mas, bpa=23.46 degrees ! Estimated noise=776.974 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0143006 Jy ! Component: 100 - total flux cleaned = 0.0160371 Jy ! Component: 150 - total flux cleaned = 0.0160485 Jy ! Component: 200 - total flux cleaned = 0.0164133 Jy ! Total flux subtracted in 200 components = 0.0164133 Jy ! Clean residual min=-0.011672 max=0.014865 Jy/beam ! Clean residual mean=0.000678 rms=0.004741 Jy/beam ! Combined flux in latest and established models = 0.372435 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 80 components and 0.372435 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.458 mas, bmaj=22.98 mas, bpa=24.5 degrees ! Estimated noise=643.348 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00287767 Jy ! Component: 100 - total flux cleaned = -0.0029204 Jy ! Component: 150 - total flux cleaned = -0.00347938 Jy ! Component: 200 - total flux cleaned = -0.00373125 Jy ! Total flux subtracted in 200 components = -0.00373125 Jy ! Clean residual min=-0.009014 max=0.013401 Jy/beam ! Clean residual mean=0.000426 rms=0.003360 Jy/beam ! Combined flux in latest and established models = 0.368704 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 98 components and 0.368704 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.466551Jy sigma=0.001295 ! Fit after self-cal, rms=0.465623Jy sigma=0.001288 wmodel J0447-2203_S_2002_05_14_yyk\_map.mod ! Writing 98 model components to file: J0447-2203_S_2002_05_14_yyk_map.mod wobs J0447-2203_S_2002_05_14_yyk\_uvs.fits ! Writing UV FITS file: J0447-2203_S_2002_05_14_yyk_uvs.fits wwins J0447-2203_S_2002_05_14_yyk\_map.win ! wwins: Wrote 1 windows to J0447-2203_S_2002_05_14_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00503774 Jy ! Component: 100 - total flux cleaned = 0.00907673 Jy ! Component: 150 - total flux cleaned = 0.0114684 Jy ! Component: 200 - total flux cleaned = 0.0136843 Jy ! Component: 250 - total flux cleaned = 0.0153501 Jy ! Component: 300 - total flux cleaned = 0.0167879 Jy ! Component: 350 - total flux cleaned = 0.0177771 Jy ! Component: 400 - total flux cleaned = 0.0183613 Jy ! Component: 450 - total flux cleaned = 0.018808 Jy ! Component: 500 - total flux cleaned = 0.0195568 Jy ! Component: 550 - total flux cleaned = 0.0201767 Jy ! Component: 600 - total flux cleaned = 0.0208705 Jy ! Component: 650 - total flux cleaned = 0.0214424 Jy ! Component: 700 - total flux cleaned = 0.0220857 Jy ! Component: 750 - total flux cleaned = 0.0226201 Jy ! Component: 800 - total flux cleaned = 0.0234814 Jy ! Component: 850 - total flux cleaned = 0.0241484 Jy ! Component: 900 - total flux cleaned = 0.0247975 Jy ! Component: 950 - total flux cleaned = 0.025424 Jy ! Component: 1000 - total flux cleaned = 0.026032 Jy ! Component: 1050 - total flux cleaned = 0.0264026 Jy ! Component: 1100 - total flux cleaned = 0.0266914 Jy ! Component: 1150 - total flux cleaned = 0.0271855 Jy ! Component: 1200 - total flux cleaned = 0.0276656 Jy ! Component: 1250 - total flux cleaned = 0.0280666 Jy ! Component: 1300 - total flux cleaned = 0.0281971 Jy ! Component: 1350 - total flux cleaned = 0.0285172 Jy ! Component: 1400 - total flux cleaned = 0.0287054 Jy ! Component: 1450 - total flux cleaned = 0.0288916 Jy ! Component: 1500 - total flux cleaned = 0.029132 Jy ! Component: 1550 - total flux cleaned = 0.0293081 Jy ! Component: 1600 - total flux cleaned = 0.0295396 Jy ! Component: 1650 - total flux cleaned = 0.0298257 Jy ! Component: 1700 - total flux cleaned = 0.0301633 Jy ! Component: 1750 - total flux cleaned = 0.0306059 Jy ! Component: 1800 - total flux cleaned = 0.0308788 Jy ! Component: 1850 - total flux cleaned = 0.031309 Jy ! Component: 1900 - total flux cleaned = 0.031733 Jy ! Component: 1950 - total flux cleaned = 0.0321509 Jy ! Component: 2000 - total flux cleaned = 0.0326147 Jy ! Total flux subtracted in 2048 components = 0.0331239 Jy ! Clean residual min=-0.003955 max=0.003050 Jy/beam ! Clean residual mean=0.000130 rms=0.001130 Jy/beam ! Combined flux in latest and established models = 0.401828 Jy keep ! Adding 162 model components to the UV plane model. ! The established model now contains 260 components and 0.401828 Jy ![Exited script file: muppet] wmap "J0447-2203_S_2002_05_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.458 x 22.98 at 24.5 degrees (North through East) ! Clean map min=-0.0057581 max=0.11011 Jy/beam ! Writing clean map to FITS file: J0447-2203_S_2002_05_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.110107 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00110227 device "J0447-2203_S_2002_05_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J0447-2203_S_2002_05_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -3.00327 3.00327 6.00655 12.0131 24.0262 48.0524 96.1048 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0033 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.11 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.458 x 22.98 at 24.5 degrees (North through East) ! Clean map min=-0.0057581 max=0.11011 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0447-2203_S_2002_05_14_yyk\_map.gif/gif" ! Attempting to open device: 'J0447-2203_S_2002_05_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0447-2203_S_2002_05_14_yyk_uvs.log closed on Tue Jun 26 22:12:35 2007