! Started logfile: J0432-3309_X_2002_01_31_yyk_uvs.log on Wed Jun 27 10:48:07 2007
obs J0432-3309_X_2002_01_31_yyk_uva.fits
! Reading UV FITS file: J0432-3309_X_2002_01_31_yyk_uva.fits
! AN table 1: 107 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.660228 visibilities/baseline/integration-bin.
! Found source: J0432-3309
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40947e+09        8e+06          1        8e+06
!  02        2  8.47947e+09        8e+06          1        8e+06
!  03        3  8.79447e+09        8e+06          1        8e+06
!  04        4  8.89947e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 1544 lines of history.
! 
! Reading 12716 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
flag NL
! Flagging baselines of antenna 1:NL in the currently selected channels.
![@muppet J0432-3309_X_2002_01_31_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.188597 Jy 
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6506 mas, bmaj=1.676 mas, bpa=6.97 degrees
! Estimated noise=1814.87 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0604645 Jy
! Component: 100  -  total flux cleaned = 0.0742747 Jy
! Total flux subtracted in 100 components = 0.0742747 Jy
! Clean residual min=-0.014309 max=0.017487 Jy/beam
! Clean residual mean=-0.000009 rms=0.003697 Jy/beam
! Combined flux in latest and established models = 0.0742746 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.0742746 Jy
! 
! Correcting IF 1.
!  A total of 312 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 312 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 328 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 377 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.172492Jy  sigma=0.001338
! Fit after  self-cal, rms=0.170755Jy  sigma=0.001327
! Inverting map and beam 
! Estimated beam: bmin=0.6506 mas, bmaj=1.676 mas, bpa=6.97 degrees
! Estimated noise=1814.87 mJy/beam.
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9318 mas, bmaj=2.573 mas, bpa=7.681 degrees
! Estimated noise=871.024 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0103774 Jy
! Component: 100  -  total flux cleaned = 0.0107674 Jy
! Component: 150  -  total flux cleaned = 0.010854 Jy
! Component: 200  -  total flux cleaned = 0.0108507 Jy
! Total flux subtracted in 200 components = 0.0108507 Jy
! Clean residual min=-0.008239 max=0.008718 Jy/beam
! Clean residual mean=-0.000001 rms=0.002378 Jy/beam
! Combined flux in latest and established models = 0.0851253 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 9 model components to the UV plane model.
! The established model now contains 14 components and 0.0851253 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.170300Jy  sigma=0.001322
! Fit after  self-cal, rms=0.170299Jy  sigma=0.001322
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9318 x 2.573 at 7.681 degrees (North through East)
! Clean map  min=-0.0077516  max=0.07822 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.170299Jy  sigma=0.001322
! Fit after  self-cal, rms=0.170299Jy  sigma=0.001322
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.170299Jy  sigma=0.001322
! Fit after  self-cal, rms=0.170298Jy  sigma=0.001322
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9317 mas, bmaj=2.57 mas, bpa=7.646 degrees
! Estimated noise=872.359 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000121184 Jy
! Component: 100  -  total flux cleaned = -6.61654e-05 Jy
! Component: 150  -  total flux cleaned = -6.02875e-05 Jy
! Component: 200  -  total flux cleaned = -5.45172e-05 Jy
! Total flux subtracted in 200 components = -5.45172e-05 Jy
! Clean residual min=-0.008220 max=0.008621 Jy/beam
! Clean residual mean=-0.000001 rms=0.002367 Jy/beam
! Combined flux in latest and established models = 0.0850708 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 9 model components to the UV plane model.
! The established model now contains 19 components and 0.0850708 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.170274Jy  sigma=0.001322
! Fit after  self-cal, rms=0.170273Jy  sigma=0.001322
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.170273Jy  sigma=0.001322
! Fit after  self-cal, rms=0.166907Jy  sigma=0.001294
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00340306 Jy
! Component: 100  -  total flux cleaned = 0.00309498 Jy
! Component: 150  -  total flux cleaned = 0.0028893 Jy
! Component: 200  -  total flux cleaned = 0.00281448 Jy
! Total flux subtracted in 200 components = 0.00281448 Jy
! Clean residual min=-0.007806 max=0.007753 Jy/beam
! Clean residual mean=0.000020 rms=0.002166 Jy/beam
! Combined flux in latest and established models = 0.0878853 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 7 model components to the UV plane model.
! The established model now contains 23 components and 0.0878853 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.166611Jy  sigma=0.001291
! Fit after  self-cal, rms=0.166290Jy  sigma=0.001288
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9317 x 2.57 at 7.646 degrees (North through East)
! Clean map  min=-0.0071252  max=0.087437 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.22 mas, bmaj=9.999 mas, bpa=10.06 degrees
! Estimated noise=1067.12 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000215999 Jy
! Component: 100  -  total flux cleaned = -0.000215969 Jy
! Component: 150  -  total flux cleaned = -0.000215266 Jy
! Component: 200  -  total flux cleaned = -0.000214634 Jy
! Total flux subtracted in 200 components = -0.000214634 Jy
! Clean residual min=-0.009066 max=0.007854 Jy/beam
! Clean residual mean=0.000048 rms=0.002833 Jy/beam
! Combined flux in latest and established models = 0.0876706 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 3 model components to the UV plane model.
! The established model now contains 25 components and 0.0876707 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.166282Jy  sigma=0.001288
! Fit after  self-cal, rms=0.166220Jy  sigma=0.001287
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6506 mas, bmaj=1.676 mas, bpa=6.97 degrees
! Estimated noise=1815.65 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0779405 Jy
! Component: 100  -  total flux cleaned = 0.0831027 Jy
! Component: 150  -  total flux cleaned = 0.0835233 Jy
! Component: 200  -  total flux cleaned = 0.0841174 Jy
! Total flux subtracted in 200 components = 0.0841174 Jy
! Clean residual min=-0.013614 max=0.012769 Jy/beam
! Clean residual mean=-0.000000 rms=0.003360 Jy/beam
! Combined flux in latest and established models = 0.0841175 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.0841175 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9317 mas, bmaj=2.57 mas, bpa=7.646 degrees
! Estimated noise=872.359 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00392596 Jy
! Component: 100  -  total flux cleaned = 0.00406864 Jy
! Component: 150  -  total flux cleaned = 0.00418085 Jy
! Component: 200  -  total flux cleaned = 0.00427852 Jy
! Total flux subtracted in 200 components = 0.00427852 Jy
! Clean residual min=-0.007554 max=0.007125 Jy/beam
! Clean residual mean=0.000034 rms=0.002026 Jy/beam
! Combined flux in latest and established models = 0.088396 Jy
! Adding 9 model components to the UV plane model.
! The established model now contains 19 components and 0.088396 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.22 mas, bmaj=9.999 mas, bpa=10.06 degrees
! Estimated noise=1067.12 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000336316 Jy
! Component: 100  -  total flux cleaned = -0.000341659 Jy
! Component: 150  -  total flux cleaned = -0.000348321 Jy
! Component: 200  -  total flux cleaned = -0.000354632 Jy
! Total flux subtracted in 200 components = -0.000354632 Jy
! Clean residual min=-0.008996 max=0.007609 Jy/beam
! Clean residual mean=0.000055 rms=0.002795 Jy/beam
! Combined flux in latest and established models = 0.0880414 Jy
! Adding 5 model components to the UV plane model.
! The established model now contains 24 components and 0.0880414 Jy
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9317 mas, bmaj=2.57 mas, bpa=7.646 degrees
! Estimated noise=872.359 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000364803 Jy
! Component: 100  -  total flux cleaned = 0.000364683 Jy
! Component: 150  -  total flux cleaned = 0.00036613 Jy
! Component: 200  -  total flux cleaned = 0.000363836 Jy
! Total flux subtracted in 200 components = 0.000363836 Jy
! Clean residual min=-0.007445 max=0.007145 Jy/beam
! Clean residual mean=0.000034 rms=0.002020 Jy/beam
! Combined flux in latest and established models = 0.0884052 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 10 model components to the UV plane model.
! The established model now contains 31 components and 0.0884052 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.166074Jy  sigma=0.001287
! Fit after  self-cal, rms=0.166048Jy  sigma=0.001286
wmodel J0432-3309_X_2002_01_31_yyk\_map.mod
! Writing 31 model components to file: J0432-3309_X_2002_01_31_yyk_map.mod
wobs J0432-3309_X_2002_01_31_yyk\_uvs.fits
! Applying 107 buffered edits.
! Writing UV FITS file: J0432-3309_X_2002_01_31_yyk_uvs.fits
wwins J0432-3309_X_2002_01_31_yyk\_map.win
! wwins: Wrote 1 windows to J0432-3309_X_2002_01_31_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000767585 Jy
! Component: 100  -  total flux cleaned = 0.00235557 Jy
! Component: 150  -  total flux cleaned = 0.00358813 Jy
! Component: 200  -  total flux cleaned = 0.00472167 Jy
! Component: 250  -  total flux cleaned = 0.00576295 Jy
! Component: 300  -  total flux cleaned = 0.00655165 Jy
! Component: 350  -  total flux cleaned = 0.00720098 Jy
! Component: 400  -  total flux cleaned = 0.00795907 Jy
! Component: 450  -  total flux cleaned = 0.00846403 Jy
! Component: 500  -  total flux cleaned = 0.00867274 Jy
! Component: 550  -  total flux cleaned = 0.00894147 Jy
! Component: 600  -  total flux cleaned = 0.00932571 Jy
! Component: 650  -  total flux cleaned = 0.00951081 Jy
! Component: 700  -  total flux cleaned = 0.00999238 Jy
! Component: 750  -  total flux cleaned = 0.0102845 Jy
! Component: 800  -  total flux cleaned = 0.0105144 Jy
! Component: 850  -  total flux cleaned = 0.0108493 Jy
! Component: 900  -  total flux cleaned = 0.0109035 Jy
! Component: 950  -  total flux cleaned = 0.0110625 Jy
! Component: 1000  -  total flux cleaned = 0.011009 Jy
! Component: 1050  -  total flux cleaned = 0.0109569 Jy
! Component: 1100  -  total flux cleaned = 0.0110561 Jy
! Component: 1150  -  total flux cleaned = 0.0109075 Jy
! Component: 1200  -  total flux cleaned = 0.01081 Jy
! Component: 1250  -  total flux cleaned = 0.0107147 Jy
! Component: 1300  -  total flux cleaned = 0.0106677 Jy
! Component: 1350  -  total flux cleaned = 0.010714 Jy
! Component: 1400  -  total flux cleaned = 0.0106228 Jy
! Component: 1450  -  total flux cleaned = 0.0104901 Jy
! Component: 1500  -  total flux cleaned = 0.0103587 Jy
! Component: 1550  -  total flux cleaned = 0.0101004 Jy
! Component: 1600  -  total flux cleaned = 0.00993147 Jy
! Component: 1650  -  total flux cleaned = 0.00972365 Jy
! Component: 1700  -  total flux cleaned = 0.00956015 Jy
! Component: 1750  -  total flux cleaned = 0.00943836 Jy
! Component: 1800  -  total flux cleaned = 0.00927772 Jy
! Component: 1850  -  total flux cleaned = 0.00915854 Jy
! Component: 1900  -  total flux cleaned = 0.00888506 Jy
! Component: 1950  -  total flux cleaned = 0.0088075 Jy
! Component: 2000  -  total flux cleaned = 0.00854081 Jy
! Total flux subtracted in 2048 components = 0.00842798 Jy
! Clean residual min=-0.002293 max=0.002295 Jy/beam
! Clean residual mean=-0.000020 rms=0.000702 Jy/beam
! Combined flux in latest and established models = 0.0968332 Jy
keep
! Adding 114 model components to the UV plane model.
! The established model now contains 145 components and 0.0968332 Jy
![Exited script file: muppet]
wmap "J0432-3309_X_2002_01_31_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9317 x 2.57 at 7.646 degrees (North through East)
! Clean map  min=-0.0035982  max=0.086159 Jy/beam
! Writing clean map to FITS file: J0432-3309_X_2002_01_31_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0861589 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000694881 
device "J0432-3309_X_2002_01_31_yyk\_map.eps/VPS"
! Attempting to open device: 'J0432-3309_X_2002_01_31_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.41953 2.41953 4.83906 9.67813 19.3563 38.7125 77.425
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.002 
print "peak=",int(peak_flux*1000)/1000
! peak= 0.086 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9317 x 2.57 at 7.646 degrees (North through East)
! Clean map  min=-0.0035982  max=0.086159 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J0432-3309_X_2002_01_31_yyk\_map.gif/gif"
! Attempting to open device: 'J0432-3309_X_2002_01_31_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J0432-3309_X_2002_01_31_yyk_uvs.log closed on Wed Jun 27 10:48:14 2007