! Started logfile: J0350-3232_S_2002_01_31_yyk_uvs.log on Tue Jun 26 22:08:37 2007 obs J0350-3232_S_2002_01_31_yyk_uva.fits ! Reading UV FITS file: J0350-3232_S_2002_01_31_yyk_uva.fits ! AN table 1: 96 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.721296 visibilities/baseline/integration-bin. ! Found source: J0350-3232 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22947e+09 8e+06 1 8e+06 ! 02 2 2.25947e+09 8e+06 1 8e+06 ! 03 3 2.34947e+09 8e+06 1 8e+06 ! 04 4 2.36947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1224 lines of history. ! ! Reading 12464 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0350-3232_S_2002_01_31_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.249772 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.404 mas, bmaj=6.082 mas, bpa=1.375 degrees ! Estimated noise=1628.45 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.117928 Jy ! Component: 100 - total flux cleaned = 0.148774 Jy ! Total flux subtracted in 100 components = 0.148774 Jy ! Clean residual min=-0.008066 max=0.014302 Jy/beam ! Clean residual mean=-0.000021 rms=0.002523 Jy/beam ! Combined flux in latest and established models = 0.148774 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.148774 Jy ! ! Correcting IF 1. ! A total of 141 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 237 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 158 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 141 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.195794Jy sigma=0.001264 ! Fit after self-cal, rms=0.195720Jy sigma=0.001263 ! Inverting map and beam ! Estimated beam: bmin=2.404 mas, bmaj=6.082 mas, bpa=1.375 degrees ! Estimated noise=1628.45 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.316 mas, bmaj=8.039 mas, bpa=2.062 degrees ! Estimated noise=953.669 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4, 9). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0261369 Jy ! Component: 100 - total flux cleaned = 0.0366388 Jy ! Component: 150 - total flux cleaned = 0.0408904 Jy ! Component: 200 - total flux cleaned = 0.0414029 Jy ! Total flux subtracted in 200 components = 0.0414029 Jy ! Clean residual min=-0.005341 max=0.009020 Jy/beam ! Clean residual mean=0.000117 rms=0.001641 Jy/beam ! Combined flux in latest and established models = 0.190177 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 54 model components to the UV plane model. ! The established model now contains 69 components and 0.190177 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193454Jy sigma=0.001246 ! Fit after self-cal, rms=0.193355Jy sigma=0.001246 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.316 x 8.039 at 2.062 degrees (North through East) ! Clean map min=-0.0045256 max=0.13763 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.193355Jy sigma=0.001246 ! Fit after self-cal, rms=0.193355Jy sigma=0.001246 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193355Jy sigma=0.001246 ! Fit after self-cal, rms=0.193355Jy sigma=0.001246 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.316 mas, bmaj=8.039 mas, bpa=2.062 degrees ! Estimated noise=953.669 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00328268 Jy ! Component: 100 - total flux cleaned = 0.00338936 Jy ! Component: 150 - total flux cleaned = 0.00331241 Jy ! Component: 200 - total flux cleaned = 0.0031808 Jy ! Total flux subtracted in 200 components = 0.0031808 Jy ! Clean residual min=-0.004801 max=0.006118 Jy/beam ! Clean residual mean=0.000108 rms=0.001432 Jy/beam ! Combined flux in latest and established models = 0.193358 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 86 components and 0.193358 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193223Jy sigma=0.001245 ! Fit after self-cal, rms=0.193203Jy sigma=0.001245 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193203Jy sigma=0.001245 ! Fit after self-cal, rms=0.189580Jy sigma=0.001222 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00233178 Jy ! Component: 100 - total flux cleaned = 0.00219946 Jy ! Component: 150 - total flux cleaned = 0.00209123 Jy ! Component: 200 - total flux cleaned = 0.00209096 Jy ! Total flux subtracted in 200 components = 0.00209096 Jy ! Clean residual min=-0.004344 max=0.005113 Jy/beam ! Clean residual mean=0.000099 rms=0.001399 Jy/beam ! Combined flux in latest and established models = 0.195449 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 110 components and 0.195449 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.189360Jy sigma=0.001221 ! Fit after self-cal, rms=0.188934Jy sigma=0.001218 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.316 x 8.039 at 2.062 degrees (North through East) ! Clean map min=-0.0046535 max=0.13863 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.188934Jy sigma=0.001218 ! Fit after self-cal, rms=0.187915Jy sigma=0.001216 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.187915Jy sigma=0.001216 ! Fit after self-cal, rms=0.187793Jy sigma=0.001215 ! Inverting map and beam ! Estimated beam: bmin=3.291 mas, bmaj=7.947 mas, bpa=2.534 degrees ! Estimated noise=951.443 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0019929 Jy ! Component: 100 - total flux cleaned = 0.00205974 Jy ! Component: 150 - total flux cleaned = 0.00211983 Jy ! Component: 200 - total flux cleaned = 0.00206773 Jy ! Total flux subtracted in 200 components = 0.00206773 Jy ! Clean residual min=-0.004665 max=0.004956 Jy/beam ! Clean residual mean=0.000095 rms=0.001303 Jy/beam ! Combined flux in latest and established models = 0.197516 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 128 components and 0.197516 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.187740Jy sigma=0.001215 ! Fit after self-cal, rms=0.187681Jy sigma=0.001215 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.187681Jy sigma=0.001215 ! Fit after self-cal, rms=0.190007Jy sigma=0.001214 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.190007Jy sigma=0.001214 ! Fit after self-cal, rms=0.189972Jy sigma=0.001214 ! Inverting map and beam ! Estimated beam: bmin=3.292 mas, bmaj=8.034 mas, bpa=2.6 degrees ! Estimated noise=959.554 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00211857 Jy ! Component: 100 - total flux cleaned = 0.00218182 Jy ! Component: 150 - total flux cleaned = 0.0021273 Jy ! Component: 200 - total flux cleaned = 0.00207323 Jy ! Total flux subtracted in 200 components = 0.00207323 Jy ! Clean residual min=-0.004557 max=0.004780 Jy/beam ! Clean residual mean=0.000098 rms=0.001295 Jy/beam ! Combined flux in latest and established models = 0.19959 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 146 components and 0.19959 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.189928Jy sigma=0.001213 ! Fit after self-cal, rms=0.189908Jy sigma=0.001213 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.987 mas, bmaj=25.08 mas, bpa=7.152 degrees ! Estimated noise=1195.59 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00077864 Jy ! Component: 100 - total flux cleaned = 0.000780917 Jy ! Component: 150 - total flux cleaned = 0.000809804 Jy ! Component: 200 - total flux cleaned = 0.000808865 Jy ! Total flux subtracted in 200 components = 0.000808865 Jy ! Clean residual min=-0.004073 max=0.005373 Jy/beam ! Clean residual mean=0.000172 rms=0.001541 Jy/beam ! Combined flux in latest and established models = 0.200398 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 149 components and 0.200398 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.189904Jy sigma=0.001213 ! Fit after self-cal, rms=0.189885Jy sigma=0.001213 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.399 mas, bmaj=6.1 mas, bpa=1.656 degrees ! Estimated noise=1628.53 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.123822 Jy ! Component: 100 - total flux cleaned = 0.158742 Jy ! Component: 150 - total flux cleaned = 0.175972 Jy ! Component: 200 - total flux cleaned = 0.185687 Jy ! Total flux subtracted in 200 components = 0.185687 Jy ! Clean residual min=-0.006420 max=0.006669 Jy/beam ! Clean residual mean=-0.000009 rms=0.001771 Jy/beam ! Combined flux in latest and established models = 0.185687 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.185687 Jy ! Inverting map and beam ! Estimated beam: bmin=3.292 mas, bmaj=8.034 mas, bpa=2.6 degrees ! Estimated noise=959.554 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, -7). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0108177 Jy ! Component: 100 - total flux cleaned = 0.0156768 Jy ! Component: 150 - total flux cleaned = 0.0171471 Jy ! Component: 200 - total flux cleaned = 0.0175517 Jy ! Total flux subtracted in 200 components = 0.0175517 Jy ! Clean residual min=-0.004663 max=0.005216 Jy/beam ! Clean residual mean=0.000085 rms=0.001265 Jy/beam ! Combined flux in latest and established models = 0.203238 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 73 components and 0.203238 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.987 mas, bmaj=25.08 mas, bpa=7.152 degrees ! Estimated noise=1195.59 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000168432 Jy ! Component: 100 - total flux cleaned = -2.30801e-05 Jy ! Component: 150 - total flux cleaned = -0.00012312 Jy ! Component: 200 - total flux cleaned = -0.000163031 Jy ! Total flux subtracted in 200 components = -0.000163031 Jy ! Clean residual min=-0.004165 max=0.004925 Jy/beam ! Clean residual mean=0.000150 rms=0.001539 Jy/beam ! Combined flux in latest and established models = 0.203075 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 98 components and 0.203075 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.292 mas, bmaj=8.034 mas, bpa=2.6 degrees ! Estimated noise=959.554 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000343758 Jy ! Component: 100 - total flux cleaned = 0.00027127 Jy ! Component: 150 - total flux cleaned = 0.000335216 Jy ! Component: 200 - total flux cleaned = 0.000276128 Jy ! Total flux subtracted in 200 components = 0.000276128 Jy ! Clean residual min=-0.004818 max=0.005223 Jy/beam ! Clean residual mean=0.000084 rms=0.001228 Jy/beam ! Combined flux in latest and established models = 0.203351 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 115 components and 0.203351 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.189797Jy sigma=0.001212 ! Fit after self-cal, rms=0.189768Jy sigma=0.001212 wmodel J0350-3232_S_2002_01_31_yyk\_map.mod ! Writing 115 model components to file: J0350-3232_S_2002_01_31_yyk_map.mod wobs J0350-3232_S_2002_01_31_yyk\_uvs.fits ! Writing UV FITS file: J0350-3232_S_2002_01_31_yyk_uvs.fits wwins J0350-3232_S_2002_01_31_yyk\_map.win ! wwins: Wrote 3 windows to J0350-3232_S_2002_01_31_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000601234 Jy ! Component: 100 - total flux cleaned = 0.00140791 Jy ! Component: 150 - total flux cleaned = 0.00188587 Jy ! Component: 200 - total flux cleaned = 0.00233246 Jy ! Component: 250 - total flux cleaned = 0.00269613 Jy ! Component: 300 - total flux cleaned = 0.00281227 Jy ! Component: 350 - total flux cleaned = 0.00292397 Jy ! Component: 400 - total flux cleaned = 0.00308465 Jy ! Component: 450 - total flux cleaned = 0.00334515 Jy ! Component: 500 - total flux cleaned = 0.00339581 Jy ! Component: 550 - total flux cleaned = 0.00364396 Jy ! Component: 600 - total flux cleaned = 0.00364397 Jy ! Component: 650 - total flux cleaned = 0.00388071 Jy ! Component: 700 - total flux cleaned = 0.0039727 Jy ! Component: 750 - total flux cleaned = 0.00419894 Jy ! Component: 800 - total flux cleaned = 0.00446437 Jy ! Component: 850 - total flux cleaned = 0.00468117 Jy ! Component: 900 - total flux cleaned = 0.00493625 Jy ! Component: 950 - total flux cleaned = 0.00510345 Jy ! Component: 1000 - total flux cleaned = 0.00506271 Jy ! Component: 1050 - total flux cleaned = 0.00522305 Jy ! Component: 1100 - total flux cleaned = 0.00530162 Jy ! Component: 1150 - total flux cleaned = 0.0053413 Jy ! Component: 1200 - total flux cleaned = 0.00561007 Jy ! Component: 1250 - total flux cleaned = 0.00579792 Jy ! Component: 1300 - total flux cleaned = 0.00579821 Jy ! Component: 1350 - total flux cleaned = 0.00605443 Jy ! Component: 1400 - total flux cleaned = 0.00623412 Jy ! Component: 1450 - total flux cleaned = 0.00626939 Jy ! Component: 1500 - total flux cleaned = 0.00637427 Jy ! Component: 1550 - total flux cleaned = 0.00647793 Jy ! Component: 1600 - total flux cleaned = 0.00657997 Jy ! Component: 1650 - total flux cleaned = 0.00671429 Jy ! Component: 1700 - total flux cleaned = 0.00684691 Jy ! Component: 1750 - total flux cleaned = 0.00691285 Jy ! Component: 1800 - total flux cleaned = 0.00713925 Jy ! Component: 1850 - total flux cleaned = 0.00720258 Jy ! Component: 1900 - total flux cleaned = 0.00726578 Jy ! Component: 1950 - total flux cleaned = 0.00732867 Jy ! Component: 2000 - total flux cleaned = 0.00745228 Jy ! Total flux subtracted in 2048 components = 0.00751339 Jy ! Clean residual min=-0.001523 max=0.002205 Jy/beam ! Clean residual mean=0.000067 rms=0.000621 Jy/beam ! Combined flux in latest and established models = 0.210865 Jy keep ! Adding 127 model components to the UV plane model. ! The established model now contains 242 components and 0.210865 Jy ![Exited script file: muppet] wmap "J0350-3232_S_2002_01_31_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.292 x 8.034 at 2.6 degrees (North through East) ! Clean map min=-0.0034651 max=0.13795 Jy/beam ! Writing clean map to FITS file: J0350-3232_S_2002_01_31_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.137945 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000620283 device "J0350-3232_S_2002_01_31_yyk\_map.eps/VPS" ! Attempting to open device: 'J0350-3232_S_2002_01_31_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.34897 1.34897 2.69795 5.3959 10.7918 21.5836 43.1672 86.3344 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.137 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.292 x 8.034 at 2.6 degrees (North through East) ! Clean map min=-0.0034651 max=0.13795 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0350-3232_S_2002_01_31_yyk\_map.gif/gif" ! Attempting to open device: 'J0350-3232_S_2002_01_31_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0350-3232_S_2002_01_31_yyk_uvs.log closed on Tue Jun 26 22:08:44 2007